Windows cross button problem.

Similar Questions

• Windows and buttons locked tab appearance on screen

  I don't know why, but my windows and buttons drop-down menu is locked to the appearance on the view menu tab

  Here is a picture http://imageshack.us/photo/my-images/199/probro.png/

  My profile
  Intel Core i3
  3.10 Ghz clock speed
  Intel High Defination Familly with 1024 MB of VRAM graphics
  Windows XP Professional SP3 32-bit version
  4 GB OF RAM
  500 GB hard drive
  Help me

  Hello

  • How long have you been faced with the same question?

  You can view these methods:

  Method 1:

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
  Note:
  How to configure Windows to use a Normal startup state
  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.
  1. click on start and then click Run.
  2. type msconfig and click OK.
  The System Configuration Utility dialog box appears.
  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.
   
  Method 2:
  You can check in another user account.
  How to create and configure user accounts in Windows XP
  http://support.Microsoft.com/kb/279783
   
  Method 3:
  I also suggest you to update display drivers on the manufacturer's Web site.
   
   

• What do you do when windows and buttons is gray out?

  Hi, my name is Rhionna and I have a problem on my Windows XP Service pack 3. Well, last night, I scanned my PC for registry errors there were some and I fixed them, but now I can not apply visual styles. Windows and buttons in properties is grey outside, it wasn't before but today I went to a link to a website to try to repair the files in my theme after that, it was gray would be out so what do I do? :(

  Registry cleaners are dangerous programs.  I do not recommend their use for these sorts of reasons.  Your best bet at the moment is to restore your registry to a time before you had this problem using "System Restore".  One of these two methods, you should get going again.

  "How to restore Windows XP to a previous state"
    <>http://support.Microsoft.com/kb/306084 >

  If you cannot start the program of the above procedure, or if it fails to restore, then try this:
  "How to start the System Restore tool by using the option of safe mode with the command prompt in Windows XP"
    <>http://support.Microsoft.com/kb/304449 >

  HTH,
  JW

• minimize, resize, close the windows, the buttons at the top right do not work in Chrome

  I found several references to this problem, but all were dated in 2010, which suggests that there must be a solution. I use Vista Home Premium and something has happened in the last two months, causing these buttons allow to stop working - reduced, resize, close the windows, the buttons at the top right do not work in Chrome. They work in all applications, but not in Google Chrome. Please notify. Thank you. PS talk in terms of beginner I'm not a programmer. Thank you, again.

  A friend told law the DPI setting and calculation of reboot. Problem solved.

• Printer problems due to software on my windows vista desktop problems

  They told me that I have a software problem on my windows vista desktop, because - my printer print test page, but seems to have a communication problem with some of the jobs I want to print. I can't right click and print. Someone at - he heard of this problem and might be able to give me some advice?

  Hello

  1. What is the exact error message?

  2. What is the brand and model of the printer?

  3 have there been recent changes made on the computer before the show?

  Please follow the steps below and get back to us with the results.

  Method 1: Run the Microsoft fixit and check if it helps.

  Diagnose and automatically fix problems printing and printer

  http://support.Microsoft.com/mats/printing_problems/en-us

  Method 2: R the print service spooler and verify.

  You must be logged on as administrator to perform these steps.

  a. open administrative tools by clicking the Start button, then Control Panel. In the search box, type administrative tools, and then click Administrative Tools.

  b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. right-click on the print spooler service and then click Properties.

  d. on the general tab, next to startup type, make sure that automatic is selected.

  e. If the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Method 3: Update the printer drivers and check.

  Find and install printer drivers in Windows Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers

  Update drivers: recommended links.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

  For more information, see the link:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Let us know if it helps!

• Windows HotStart button works only in Windows Vista.

  Original title: hot button start.

  is there a on off to do this, mine does nothing when I push it?

  Hi jeffreydluther,

  What application you are trying to open with HotStart button?

  You can try to configure the Windows HotStart button on your machine and see if the problem still occurs.

  Configuration Windows HotStart

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem creating Windows DVD? Or Windows Movie Maker problem?

  Hello!  I created a slide show in Windows Movie Maker, which plays on my computer without problem.  Now, I try to burn it to a DVD by using the Windows DVD authoring application.  I was able to burn my DVDs sucessfully using the wizard and when I put it in the DVD player I get the main menu I created.

  I press play and start my video, but he plays 16 seconds and everything goes black.  Time continues to roll until the full 3 minutes are up, but I have 16 seconds of my film.  I burned 3 DVD and it did the same thing.

  Can someone help me with what I'm doing wrong?

  Hi Khsb14,

  Have a. you been able to watch the video before burning?

  B. did burn the DVD?

  C. is the DVD burner connected properly

  D. is the audio work after the 16^th s?

  E. do you have a mistake when he went to the black screen?

  This could be a problem with the burner DVD or the method of engraving. Try the following methods.

  Method 1

  Previewing your DVD, you can view the photos and videos on this subject. Check if the full video is seen in the preview. This can help you determine if you want to make changes to the DVD before burning the disc.

  1. In the ready to burn DVD page, click Preview.
  2. To read the DVD preview, click play in the control screen.
  3. To control the playback, click Pause , play , previous chapter or next chapter , according to what you want to do.
  4. To display the DVD menu, click Menu. Click on the top, bottom, right, or arrows left to go in this direction on the DVD menu preview, and then click the Enter button to play the selected menu item. Click OK when you are done previewing the DVD.

  Check the link for more information.

  http://Windows.Microsoft.com/en-us/Windows7/burn-a-DVD-video-disc-with-Windows-DVD-Maker

  Method 3

  Choose a speed slower burn to your DVD recorder as follows:

  • 1. Return to the Add pictures and video to the DVD page and then click on Options.
    2. In the DVD burning speed box, select medium or slow.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/play-an-audio-or-video-file-frequently-asked-questions

  I hope this helps.

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• Revolve 810 G1 unlock in tablet mode. Windows Security button?

  
  

  There is a BIOS update for the revolution by moving to version F.43 update allows to touch the power button while pushing the Windows button (left of the central hinge) to act as the Windows Security button. -It worked for me.

  I also read that by pressing [Ctrl], [Alt] left button right button + [Del] button on-screen keyboard works but I have not tried.

• HP655 update for windows 8.1 problem with Realtek driver

  Need help with the problem addressed in another forum HP.

  http://h30434.www3.HP.com/T5/wireless-Internet-home-networking/HP-655-update-to-Windows-8-1-problem-...

  The last message point far on this forum to get help.

  -----------,

  Install the new Bios and the network works

  655 HP

  Updated HP Notebook System BIOS (AMD processors)

  Version:

• Windows Explorer button disappeared?

  I'm sure I've made some changes and now my Windows Explorer button is gone. I did reappear by going to all programs-accessories and right click Windows Explorer and chose "Pin to start menu. But is it the only way that it is displayed in the Start Menu? Is there somewhere else it displays down by & assistance, search, and run?

  It seems normal. The only place in the start menu where the "Windows Explorer" shortcut is displayed by default is under [Start - Programs - Accessories]

  And no, he does not appear in the menu on the right as you describe.

  Ramesh Srinivasan . The Winhelponline Blog
  Microsoft MVP, Windows desktop experience

• You have given permission for am Act to Windows to resolve problems on the pc

  Original title: am

  You have given permission for am Act to Windows to resolve problems on the pc

  A quick Google for "Am" indicates that this is a scam.

  http://www.Google.com/#hl=en&source=HP&q=Comantra&AQ=f&AQI=&OQ=&FP=64df356c6a3f8304 MS - MVP - Elephant Boy computers - don't panic!

• My Windows XP has problems with shlwapi.dll

  My Windows XP has problems with shlwapi.dll and there are plenty of sites to download, but they all want money, why don't misrosoft not has an answer for this problem. When I try to update to internet explorer 6 to explore 8 then the error always pops up saying: you have a problem with shlawpi.dll and he can not continue... Very very frustrating.

  In general, it is not a good idea to download dll files.   See, for example, http://pcsupport.about.com/od/findtheproblem/qt/dll-download.htm

  If you explain more in detail what your problem is, including providing the full text of the error without paraphrase, it is likely that someone in the appropriate Microsoft Answers forum will be able to help.

  Because it seems that your problem is related to Internet Explorer, you are more likely to receive help if you post in the forum Internet Explorer, where there are already many threads dealing with issues of shlwapi.dll on IE: http://answers.microsoft.com/en-us/Search/Search?SearchTerm=shlwapi&CurrentScope.ForumName=ie&CurrentScope.Filter=&askingquestion=false

  If you look through some of these threads, you can find the answer to your question without further delay.  If not (or if you just want to watch), do not forget to include not only the text of the error message, but also the version of Windows XP, you have (Home, Pro, Media Center) and its service pack (start > run > winver > OK).

  And, based on this thread - with what seems to be your exact problem - also include responses to the following questions (there no answer, certainly because the OP has NOT provided to the request for information):

  1. what application or anti-virus security suite is installed and is your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  2. do you have a free trial Norton, or a test of free McAfee [a] come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  3 is installed WinXP SP3?

• Windows XP Backup problem, cannot find the backup utility

  original title: windows xp backup problem

  I have a system with windows xp, I tried to backup the drive c: to the top, when I click on start, all programs, accessories, System tool, I see how to do anything else but up... i back cant find utility backup click on... then save my c: drive?

  Hello

  I suggest you follow the steps mentioned in the article given below to install windows on the system backup.

  How to install backup from the CD-ROM in Windows XP Home Edition

  http://support.Microsoft.com/kb/302894

  Also, I suggest you return the article mentioned below to learn how to use the backup utility.

  How to use the backup utility to back up files and folders in Windows XP Home Edition

  http://support.Microsoft.com/kb/320820

• Windows 7 installation problem Pavilion dv6-6c45eg

  Since I have a free license for windows 7 Professional at home, I decided to install it on my new Pavilion dv6-6c45eg that came with Windows 7 Home Premium.

  The problem is that the installation process stops at the beginning and said something like: "A required CD/DVD drive driver is missing... ", then he gives me the choice to load a driver. I googled a lot since yesterday and there seems to be something related to the SATA driver, however even load the SATA driver installation is not moving forward, after loading the driver it say that no new units have been detected.

  What I tried:

  * Install Windows 7 x 32 and x 64
  * Install from a USB flash drive

  * Install Windows 8 (same problem in Windows 7)

  * Check the SATA in the BIOS (not possible to see or modify on the BIOS F.19)

  * Search for the shortcomings of HD (even changed the HD)

  I'm sure it's something related to a driver, because I also installed Linux (OpenSuse, Fedora and Ubuntu) operating systems and they work fine.
  So, I would appreciate help to solve this problem.
  Thank you very much.

  Marcio

  Hi B Mista, thanks much for your reply, but I finally solved the problem, as described in this link:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/a-required-CDDVD-device-driver-is-missing-USB/61eda679-66cc-4512-B175-d02871394461

  Kind regards

  Marcio

• Windows Services has problems and get the error code 80246008 when I try to update windows

  I have 64 bit Vista Home Premium.  I have disabled UAC for short time (just to stop and restart).  Immediately, Windows Services has problems and my services files seem to suffer (fixit would not fixit).  He could have a latent virus that only suspended in no time I had disabled UAC?  I run the computer as an administrator, which I now realize is a problem.  I have a firewall and protection ESET and had all updates until two days ago, if that's any help.

  Also note: BITS of problems that seem to be linked to the system events to COM + service problem - she won't start - error 230: the pipe state is invalid.

  1. http://support.microsoft.com/kb/956706

  Error message when you search for available updates on the Windows Update Web site or on the Microsoft Update Web site: "0 x 80246008.

  2. http://support.microsoft.com/kb/910337
  If the fixit does not work in the article, read the article to other troubleshooting suggestions.

  PS - repair tool: http://www.microsoft.com/en-au/download/details.aspx?id=7997 (64-bit)