"Windows didn't load setup for Volume." Please contact hardware vendor. » __

Similar Questions

• "windows didn't load the installer for the contact display program provider" is a message I get when trying to install the nivida geforce4 mx420 pilot. How can I solve this problem?

  The driver file was accidentally deleted and everytime I try to reinstall I get an error message indicating that windows didn't load setup for display. Contact the vendor of the program

  Hello

  I suggest you follow the steps mentioned below.

  Method 1:

  a. download the drivers from the Nvidia site. Click on the link below.

  http://www.nvidia.com/object/winxp_2k_93.71_2.html

  b. uninstall the Nvidia drivers that are installed on the system, then Device Manager software, then restart the system. The detection of material line is displayed.

  c. now manually choose the drivers you downloaded on the system and then install it on the system and check if the problem is resolved.

  Method 2:

  I also suggest you follow the steps mentioned below.

  a. locate desk.cpl in c:\windows\system32\dll cache.

  b. copy in c:\windows\system32 and check if the problem is resolved.

  I suggest you follow the steps mentioned in the article below.

  Resources for troubleshooting problems in Windows XP

  http://support.Microsoft.com/kb/307960/en-us

  See also the article mentioned below.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658/en-us

• An internal error occurred in the initialization stage. The application could not be loaded. Please contact the vendor of the application. No.502 of error in windows 7 Home premium 64-bit OS.

  I use a laptop Dell Inspiron N5010, with Win 7 home premium 64-bit OS, recently turning on my laptop with the with the power button, by chance I pressed it twice and I got the error message that the PC was not shut down properly and will resume windows again. After the PC recovered and resumed, I started having the error: "an internal error occurred in the initialization stage. The application could not be loaded. Please contact the vendor of the application. No.502 error"while starting. as I have yahoo Messenger at startup. Even if I start some programs after turning on my PC, even if I have nothing else on my Boot., I get this message first, I click on ok, then its fine... I want to just get rid of this error message. Help, please. What should I uninstall n re - install all the applications for which I get this error. or do a system restore?

  I use a laptop Dell Inspiron N5010, with Win 7 home premium 64-bit OS, recently turning on my laptop with the with the power button, by chance I pressed it twice and I got the error message that the PC was not shut down properly and will resume windows again. After the PC recovered and resumed, I started having the error: "an internal error occurred in the initialization stage. The application could not be loaded. Please contact the vendor of the application. No.502 error"while starting. as I have yahoo Messenger at startup. Even if I start some programs after turning on my PC, even if I have nothing else on my Boot., I get this message first, I click on ok, then its fine... I want to just get rid of this error message. Help, please. What should I uninstall n re - install all the applications for which I get this error. or do a system restore?

  You have posted in forum Windows XP hardware and drivers.  You should have posted in forum Windows 7, probably the forumprograms .

  If you post here, remember to include the name of the application that could not be loaded. Is Yahoo Messenger? Something else ("all applications for which I get this error")?

  Your question is also confusing: you get this error message every time that you do a reboot?

  You can use msconfigor Autoruns (look at the 'Connection' tab) to temporarily disable programs that start automatically when you log in to isolate the application that is causing the problem.

• Windows XP Service Pack 3 error "Windows has no load installer for hdc.

  service pack 3 Windows could not load the installer for hdc

  having problems installing SP3, error message "windows has no load installer for hdc.

  Hi Doug,.

  See the following article to find out how to install Windows XP Service Pack 3.

  Steps to take before you install Windows XP Service Pack 3

  See also:

  How to troubleshoot an installation fails on Windows XP Service Pack 3

• During the installation of Windows, shows that an internal error occurred in the initialization stage. The application could not be loaded. Please contact the vendor of the application. Error n ° 302

  An error internal occureed in the initialization stage. The application could not be loaded. Please contact the vendor of the application. Error n ° 302

  original title: an internal error occurred in the initialization stage. The application could not be loaded. Please contact the vendor of the application. Error n ° 302

  Hello Stephen,
  try to run the "Startup Repair" utility located on your installation DVD.
  hope this helps
  Eddie B.

• The windows service install are not accessible. This can happen if windows install is not properly installed. Please contact the support staff

  Whenever I try to install a new version of Java, but also apply for income tax, my computer basically freezes and I have to stop it manually after that I finally get the message "cannot access the windows service install. This can happen if windows install is not properly installed.  Please contact the support staff.  I tried MSI 4.5 but everytime I try to download, I get the prompt "not applicable to your system.  I'm running on Windows Vista basic and I tried to cancellation of the registration of windows install and re save, but nothing seems to work.  Extremely frustrated

  Hi confused79,

  Thank you for your message.

  Here is more information on the use of file system (CFS) Auditor:

  http://support.Microsoft.com/kb/929833

  You can also create another profile to see if the problem is the result of a corruption of your current profile.

  Here's how:

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Computer HP laptop windows didn't load because the HAL is missing or corrupt

  I have a HP Pavilion dv6605us

  Windows Vista

  Error message I get is:

  File: \Windows\System32\hal.dll

  Status: 0xc000000f

  Info: Windows could not load because the HAL is missing or corrupt

  The changes that I do is I did a clean install of Linux deleting all partitions including the HP recovery partition.

  Now that I have to go back to Windows, I used the recovery disks that I did when I bought the laptop. It took about 24 hours to completely install, then I got this error message when you restart.

  Help, please

  Best thing to do is to nuke the drive,then reinstall Vista again.

  I know it's a long process, but you should get back to run.

  Linux makes strange recovery partitions does not understand and they are deleted correctly, boot and nuke will take care of it.

• 0xC0000221 error windows didn't load a critical system driver is missing or corrupt.

  Hey, I got a letter on my laptop to install service pack 2 for windows vista and I did it with no complications until I reset my laptop and when it came back I received an error:

  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:

  1. Insert your windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on "repair your computer."

  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.

  File: \Windows\System32\drivers\ecache.sys
  Status: 0xc0000221
  Info: Windows could not load a critical system driver is missing or corrupt.

  I followed these instructions several times and made repairs to start ending telling me that "Windows cannot repair this problem automatically" and "If you recently set a device to this computer, like a camera or portable music player, remove it and then restart your computer." I have nothing connected to the computer.

  I also tried to restore the system that is not no matter how far back that I try to restore to.

  Take your laptop computer to a local computer repair shop, reputable and independent.

• you do not have the necessary permissions this cette tache task for help, please contact adminatrator

  you do not have permissions to perform this task, please contact administrator help, im signed to ask administrator so why can I perform the task? Thanks in advance for your help

  Hello
   
  1. what operating system is installed on the computer?
  2. which task you perform?
  3. should he arrive with a particular task or tasks?
  4 you did changes to the computer before the show?
  Answer for you help the better.
  Follow the steps mentioned below and see if that helps.
  Right-click on the task and click Run as administrator
  You can also check:
  Suggestions for a question on the help forums

  http://support.Microsoft.com/kb/555375

• Windows Update is stuck look for updates please help

  I get very frustrated because one of my programs usually open unless I do an update of the platform, but when I try to update my computer is just stuck to 'check updates' and its been like that for more than a day. I don't know what to do, I called the support microsoft product, and even that they did not help. This is a new computer with windows 7 pro. Please help me I am very frustrated.

  3020369 is only a prerequisite for the KB3172605, a criticism:

  https://support.Microsoft.com/kb/3172605

  Best regards, VZ :)

• Can you install Windows XP Professional utility: Setup for floppy diskettes Boot Install on a flash drive?

  Can you install this on a USB flash drive, if you don't use no floppies? If you can, how?

  Can you install this on a USB flash drive, if you don't use no floppies? If you can, how?

  In addition to the above answer, even if your computer supports booting from a usb key, based on my experience, it is easier to use a cd rom. usb Flash drives can be very difficult to use to install windows. I did a couple of times but not without problems. If the computer you are using is able to boot at all, and you do not have a cd rom USB that you can try to install windows over the network.  Install windows from a flash drive is a long process. $30USD for a usb CD-ROM.

  See the article on the link below if you need to install a flash drive.

  Install Windows XP using USB Flash disk / Flash Drive - step-by-step Guide

• An internal error occurred in the initialization stage. The application could not be loaded. Please contact the vendor of the application. Misconception # 700

  When I start my PC, I always get this message. With that, a small figure of red monkey appears.

  I have a Medion computer, 64-bit windows 7

  I recently installed AVG Antivirus (FREE) and Comodo Firewall.

  Can someone please help me solve this problem. In addition to the computer works fine.

  Thanks in advance for your answer.

  Use the clean boot procedure to determine which startup program is causeing the question

• Windows could not load the installer for the display

  Whenever I try to open the NVIDIA settings, it gives me the error message "Windows has no load installer for display. I did what some post said and went to the Device Manager and tried to find the graphics card. To realize that I could not find them. Then I went down to the unknown tab and there was my NVIDIA GeForce video card, so when I try to update my drivers, it gives me this error even. Help! D:

  Do you have downloaded screensavers, etc...

  1) click on 'Start' > select 'Control panel' > double-click "Add Hardware".
  Select ' Yes, "I have already connected the hardware" > click "next".
  Find and click on your device and click "next".
  If a driver is necessary, it should have with your hard drive.
  You can select "Disk" and load the driver from there.
   
  If successful, go no further
   
  (2) when you install new video drivers
  Uninstall the old ones
  Restart in vga mode
  disable a / v
  Install new drivers
  Reset
   
  If successful, no further
   
  (3) search for "desk.cpl" in the cache c:\windows\system32\dll and copy it to system32.
  Retry installation
   

• Windows could not load the installer of the image. Help please!

  My HP4010 scanner has stopped working. I tried to reload the software, but now get message ' windows has no load installer for the image. I have uninstalled and reinstalled the HP software and tried as far as I know. I downloaded the latest HP drivers but no change. I should be grateful if you would help.

  Thank you

  John

  Hello

  Step 1: This could also be a problem with the driver. I suggest you to install the right driver for your scanner from the manufacturer's Web site and check if it works very well.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Step 2: Install the latest version of DirectX on your computer.

  Reinstall the latest version of Microsoft DirectX. For more information about troubleshooting and installing DirectX click the numbers below to view the articles in the Microsoft Knowledge Base:
  (http://support.microsoft.com/kb/179113/ ) How to download and install DirectX

  (http://support.microsoft.com/kb/157730/ ) How to determine the version of DirectX using the DirectX Diagnostic tool

  Step 3: You can also delete the upper and lower of your registry filters and check if it works.

  WARNING:

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  a. Click Start and then click all programs.

  b. click Accessories and then click Run.

  c. type regedit and then click OK.

  d. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  e. in the navigation pane, locate and then click the registry key under:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  f. in the right pane, click UpperFilters.

  Note You can also see an UpperFilters.bak registry entry. You don't have to delete this entry. Click UpperFilters. If you do not see the UpperFilters registry entry, you may still have to delete the LowerFilters registry entry. To do this, go to step i.

  g. in the Edit menu, click on delete.

  h. When you are prompted to confirm the deletion, click Yes.

  i. in the right pane, click LowerFilters.

  j. in the Edit menu, click on delete.

  k. When you are prompted to confirm the deletion, click Yes.

  Exit Registry Editor.

  Mr., restart the computer.

• Windows failed to load because of missing or damaged file: scsiport.sys

  Fortunately, I was sitting on my pc in the middle of a game when a surge of events which, for some odd reason only affected my room in the House and the rest of the House did not surge.

  then when he went to reset it came with the following:
  Windows didn't load because a required file is missing or corrupt.
  the file is: scsiport.sys
  and status: 0xc00000e9

  I went to search my pc updated 2 months ago, and the guy who has updated it did not return my windows vista installation disk... that the computer says I need a reboot and repair.
  is there anything I can do to fix this? and how much will it cost?
  PS. is there any good surge protectors out there because the one im using obviously did not do nething and it still says her job...

  Try your local computer repair shop and ask then good re brand surge protectors.

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  You can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their way of doing recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner