Windows didn't start because the following file is missing or corrupt__ < root Windows > \system32\hal.dll__please reinstall

Similar Questions

• Windows didn't start because the following file is missing or corrupt: < root windows > \System32|hal.dll, please reinstall a copy of the above file.

   \systrem32\hal.dll

  What can I do with this message:

  Windows didn't start because the following file is missing or corrupt: \System32|hal.dll, please reinstall a copy of the above file.

  Thank you

  In Windows XP:

  http://pcsupport.about.com/od/findbyerrormessage/a/missinghaldll.htm

  In Windows Vista & 7:

  http://pcsupport.about.com/od/errorh/a/HAL-dll-missing-Windows-7-Vista.htm

  In addition, if the file is actually missing, you can try to boot from a UNIX / Linux Live CD like Knoppix and add/replace the file manually with a file from another PC running THE SAME VERSION OF WINDOWS!

  If you are not good with computers, you should ignore this option because it could cause serious problems. If you still want to try, and there is a hal.dll file in \system32\ BACK IT UP. You have to put back in place.

  Let us know if it works.

• Windows didn't start because the following file is missing/windows/system32/config/system Windows XP

  Original title: repair/restore of windows?, a little confused?

  My brother has problems with his computer. It happens that windows didn't start because the following file is missing/windows/system32/config/system. I need to know how to do this, but for some time.

  On the sites, some say not to use get it back? (is that right?) Here's what they say. He has not brought his xp disk, I tried an iso online but lacks the EULA. I have a windows xp update here somewhere, thatt allow me to fix his system?
  I basically have to hit enter then press R? Thank you

  1. Press Enter to start the configuration of Windows.

     do not choose "to repair an installation of Windows XP using the Recovery Console, press on R", (do not want to load the Recovery Console). I repeat, do not choose "to repair an installation of Windows XP using the Recovery Console, press on R.

  2. Accept the license agreement and Windows will search for existing installations of Windows.
  3. Select the XP installation you want to repair in the list, press Rto start the repair. If the repair is not one of the options, END of installation

  Hello

  You can try the troubleshooting provided in the link below steps to fix the problem.

  How do I recover from a corrupted registry that prevents Windows XP startup

  http://support.Microsoft.com/kb/307545

  Note:

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

• Windows didn't start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM

  Please need help, my computer does not start. I get the following message:

  Windows didn't start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM

  Hello

  · What is the number and the model of the computer?

  · What is the service pack installed?

  · You have the windows XP Setup disk?

  · What is the exact error message that you receive when the computer starts in return?

  You can follow the procedure from the following link: how to recover from a corrupted registry that prevents Windows XP startup: http://support.microsoft.com/kb/307545

• Windows didn't start because the following file is missing or corrupted \windows\system32\config\system

  Windows windows xp could not start because the following file is missing or damaged:
  \windows\system32\config\system
  You can accept it corresponds to repair this file by starting windows setup using the original Setup CD
  Select 'r' in the first screen to start repair

  I don't have original cd so I downloaded from the internet.  Only 1 cd when the instructions said it would be 6. that didn't work

  tillieme,
  You will need a valid XP disc to run the repair.  It is possible that the PC manufacturer develop a recovery hard disk partition.  You should check with them to see if it's an option.  Also, some manufacturers will provide filtering alternative for a small fee. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows didn't start because the following file is missing or damaged: _ < root Windows > \system32\ntoskrnl.exe.__Please reinstall a copy of the above file.

  Hi the other my system was crushed, and on restarting I got this message: Windows is not start because the following file is missing or damaged:

  \System32 \ntoskrnl.exe.
  Please reinstall a copy of the above file.

  I've read a few articles online, but still I can not solve the problem. I don't want to reinstall XP or lose my information.

  can any1 give me a simple cut down on what to do (step by step).

  Thanks in advance.

  Hello Jamdutch,

  Thank you for your message.  Click HERE for instructions to perform a repair of the system installation.  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• "When restarting, get the error, Windows could not start because the following file is missing or corrupt: < root Windows > \system32\ntoskrnl.exe.

  Original title: black screen

  Attempt to restart the Gateway system running XP Pro.  The message "Windows has not start because the following file is missing or corrupt: \system32\ntoskrnl.exe" Please reinstall a copy of this file.  What do I do and where is this file?

  There is a good chance that the disk check running the Recovery Console will solve the problem.

  1. Insert the Windows XP CD in your CD-ROM drive and restart your computer. If you are prompted, select any options needed to start (boot) on the CD.
    
  2. when the text portion of Setup begins, follow the prompts. Select the repair or recovery option by pressing R.
    
  3. If you have a dual-boot or multiboot system, select the installation that you want to access from the Recovery Console.
    
  4. When you are prompted, type the administrator password. If you have not set a password for the account admin simply press on enter
    
  5. at the command prompt, type chkdsk/r > press ENTER. (Note: there is a space between the slash and the letter k).
    
  6. at the end of the output of scan type > press ENTER.
    
  7 restart your computer.

  If you do not have a Windows Xp disk, follow the instructions HERE to create a Windows Xp Recovery Console

• Windows will not start because the following file is missing or corrupt < root windows > < hal.dll windows >

  When I turn on my PC a black screen appears for about 5 minutes, then the following message: Windows could not start because the following file is missing or corrupt I can not any more access to the computer and having to turn it off.

  Hello

  I suggest that you follow the steps described in the links below and check if they help to resolve the issue.

  Link 1:

  "Invalid Boot.ini" or "Windows did not start" error messages when you start your computer

  http://support.Microsoft.com/kb/330184

  Link 2:

  IF the steps in the link 1 does not work, check the steps in the link below.

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  http://support.Microsoft.com/kb/314477

• Windows xp hp will not start. error message: Windows has not start because the following file is missing or corrupt: < root windows > \system32\hal.dll. Please re - install a copy of the above file.

  Hello, I recently restored my windows hp tower to its factory because of virus settings and when I restarted my PC I recieced this error message: Windows has not start because the following file is missing or corrupt: \system32\hal.dll Please reinstall a copy of the above file.  where can I get a copy? and is it possible to download the start software and burn it to a cd?

  Hi FRANKGRIMES_945,

  What is the model of your computer?

  (a) you can try to arrange for a Windows XP disk that corresponds to the same edition, as it is installed on your machine.

  (b) thereafter, follow this link & check if you are able to start correctly on the desktop.

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  Hope the helps of information.
  Please post back and we do know.

• Windows (Vista) can not start because the following file is missing or corrupt: < root windows > \system32\ntoskrnl.exe

  When I start windows, the message that I get a black screen is Windows (Vista) cannot start because the file is missing or corrupt: \system32\ntoskrnl.exe. Please reinstall a copy of the above file.

  I tried to launch a system of diagnosis without a disk and everything going on. I then tried running windows in safe mode and it won't allow me. That's when I switched to an installation disc supplied with the system. I tried to recover the system from there, but it would not go beyond the option of choosing an operating system. Once I got to that screen, there was NO operating system choose.

  I tried to restore my computer and there is no restore point.

  I renounced restore my computer and thought I'll all start over and install windows vista all over again. This was not the case either. I followed these steps:

  1. Turn on your computer and insert the CD or the DVD of Windows Vista.

  2. Install Windows page, follow all of the instructions that appear, and then clickInstall now.

  3. On the Get updated important for installation page, we recommend getting the latest updates to help ensure a successful installation and to help protect your computer against security threats. You will need an Internet connection to get the installation updates.

  4. On the Type your product key for activation page, we strongly recommend that you type your 25-character product key in order to avoid problems during activation.

  5. On the Please read the license terms page, if you agree to the terms of the license, clickI accepts the terms of the license.

  6. Follow the instructions on each page. On the type of installation do you want? page, clickCustom.

  7. On the place where you want to install Windows? page, select the partition where you want to install.

  8. Click next to begin the installation. You can see a compatibility report.

  and then had this error that says;

  windows doesn't have can create a partition on disk 0. The error occurred when preparing the partition selected for installation. Error code: 0x80004005.

  Now I am stuck and don't know what to do.

  Someone at - it solutions for me. Help, please.

  Hello

  1. on which the drive was initially installed OS?
  2. What partition you selected to install Windows?

  You can try to perform a startup repair by using the Vista installation disc.

  Check out these links for help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions  

  How can I fix a startup (startup)?
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem 

  What to do if Windows does not start correctly:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly 

  What are the system recovery options in Windows Vista?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista 

  If nothing helps, so please get in touch with the system manufacturer for assistance because it may be a hardware problem.

  Kind regards
  Afzal Taher - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows didn't start because the following file is missing or damaged

  Did a system update windows Hat must now the computer restarts.
  Said/windows/system32/config/system

  Tried a repair install, but it won't work. Would help us

  E-mail address is removed from the privacy *.
  

  Never, never, never start with KB307545 with this problem.

  It's the first KB Microsoft article to come into a Bing search engine, but that doesn't make it not right (Ministry of Education: be careful - if you need me to teach you how to reproduce this problem, so you can learn how to solve this problem without a Windows XP CD instead of just use Bing and post the first article that comes up I'll be happy to do.)

  Now that you have tried to do a repair installation, who knows what condition things are in and we know not to take on your system, but I would like to start here:

  The question was preceded by a loss of power, aborted reboot or abnormal termination? (This includes the plug pulling, buttons power and removing the battery).

  These can cause corruption in the file system that must be fixed before you do anything else.

  If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

  There is zero logic to begin to try to begin to try to modify or copy files to a hard drive that has a corrupted file system, so this must first be fixed using the XP chkdsk program and run chkdsk on your hard drives may solve your problem completely.

  Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Windows didn't start because the following file is missing or corrupt: __\WINDOWS\SYSTEM32\CONFIG\SYSTEM___YOU CAN ATTEMPT to REPAIR THIS FILE BY STARTING WINDOWS SETUP using THE ORIGINAL SETUP CD - ROM__SELECT 'r' in the first screen to start repair

  This problem is on my laptop and I can not further only the screen with the above opinion.  I don't have the original disc, since I received the laptop of my mother when she could no longer remember how to use it. I need a repair of xp, or all that it can be called and information how to fix this problem is driving nuts me to have a laptop that is faulty... Please help me.

  This problem happens almost daily.

  You can search the forums for discussions with similar problems (or the same problem) and peruse the threads where the result is a happy ending and examine everything first using these methods.  This will reduce the time to resolution and frustration.

  Something like this example:

  http://social.answers.Microsoft.com/forums/en-us/XPRepair/thread/83d5c57f-9836-4f3a-bec8-04c7d81861d3/

  The question was preceded by a loss of power, aborted reboot or abnormal termination? (this includes pulling and buttons power)

  These can cause corruption in the file system that must be fixed before you do anything else.

  If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

  Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the command prompt.

  Start by checking the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Error: "Windows XP didn't start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM"

  Original title: windows xp, do not load until 08/06/11

  Windows xp2 would not start. I have windows xp on another hard drive but I am unable to see my media files, it shows only a few programs when I check the properties, it shows that 37% of the hard drive is used it is a 40gig drive, how do I get my wma filesand other files? problems on the main drive began when the current was until windows has been completely closed down.the hard drive is almost full ive been impossible to record data due a bad cd Writer.whilst in the recovery console a message came with \windows\system32\config\system missing I don't know where to find and replace this file on xp cd

  Thanks derek

  Hi Derek,.
   
  For the hard disk with the error message, try the steps mentioned in the article given below to resolve this issue:
  How do I recover from a corrupted registry that prevents Windows XP startup
  
  Warning Do not use the procedure that is described in this article if your computer has an OEM operating system. The hive system on OEM installations creates passwords and user accounts that did not exist previously. If you use the procedure that is described in this article, you may not be able to log in the recovery console to restore the original registry hives.
   
  For problems with media files, I suggest you to start a new thread and provide all the necessary information to help us help you better.

• My computer does not start. The text on the screen is: Windows didn't start because the following file is missing or corrupted: \WINDOWS\system32\c_437.nls.

  I tried to boot from the system cd, but nothing happens. Any help would be greatly appreciated. Thanks in advance.

  Wilma Jean,
  Thanks for posting in the Microsoft answers Forum.  The first thing you need to check is that your PC is set to boot from the CD.  The boot order is set in the BIOS and check the PC manufacturer for instructions on how to change it.  Once you are ready to start from the CD drive first, and then boot from the XP CD in Recovery Console.  This link explains how to start the recovery console: http://support.microsoft.com/kb/307654#3

  Once you start the recovery console, I would say the following two commands (links after the controls give explanations\instruction thereon) running.

  Chkdsk /r http://support.microsoft.com/kb/315265 (the instructions explain running cmd on the start menu, you will not need to do this step)

  sfc/scannow http://support.microsoft.com/kb/310747

  Let us know the results. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have an acer aspire one. all I get to start is windows didn't start because the following file is missing or corrupt: \windows\system32\config\system

  I try to push f8 and it just beebs or f12.

  Look here:

  http://support.Microsoft.com/kb/822705