Windows disk defragement works do not with hp support assistant

Similar Questions

• iTunes 11.4 works do not with my new iPhone 6sPlus

  iTunes 11.4 works do not with my new iPhone 6sPlus.  Do I need a different version of iTunes?

  Yes, you will need a computer, iTunes 12.3.2.

• Office using Intel h8 - 1520t with special configuration problems with HP Support Assistant 8.1

  Several days ago the wizard help notified me that I had to do an update review. It was an update Broadcom Bluetooth of a certain type. He had numbers, a slash and more after him.  I installed it.  He went through all the steps of installation, but not the last step.  Now, I get an error whenever I start up the computer indicating that BTtray.exe does not load and btwapi.dll is not found.  Initially, I had Windows 8 and upgraded to 8.1 shortly after buying the computer. I have a wireless network adapter N Premium and Bluetooth (R) (2 x 2).  The only wireless thing I use my keyboard and mouse. I don't use Bluetooth, I bought the Bluetooth with my new computer for possible future use. I can't get rid of this message at startup.

  In addition, since HP Support Assistant made this mess, I decided to uninstall it. I can't uninstall it.  I tried to reinstall what can or was not perhaps not a newer version and settle, tried to uninstall and couldn't.  The Support Assistant comes with the computer of Windows 8. Now, I can not open HP Support Assistant.

  Now comes the Windows Update and it keeps me providing a lot of optional software. I'm now trying all that they offer.

  I fixed it without doing a system restore.  I went the SWSETUP and found the original SP, which has installed the HPSA. Since it has been uninstalled in part and partly not. I reinstalled the original who put the MSI available again.  Then, once that he the reinstalled, I used the uninstall found in the same ESP under SWSETUP and removed.  It took everything with it that you had to go and I have no more problems. In addition, I had found HPSA running in the Manager of tasks and Services got deleted as they should have.  Bad installing Bluetooth which began the questions was related to the services that are running.  Because I'm not using Bluetooth, I roamed my computer and stop all the Bluetooth Services running.  I have all service packs, has not deleted because they are not hurt anything sitting there. I have no error message.  I was getting a network message and I do not use a network on my PC and I was getting the error MSI just try to uninstall HPSA.  The MSI error would leap upward when you try to uninstall using the control panel and it is because Windows could do not seem to find this program in the MS file.  The wrong program installed I think was linked to Widcomm, probably a program of Broadcom Bluetooth.   Windows tried to use 13c4ce.msi from the windows file to uninstall through Control Panel.  It does not work. The following issues have been resolved for btwapi.dll, BTTray.exe, 1316 network error and MSI error.  HPSA does not work in Windows 8.1 Pro 64 bit.  Updates are not correct and I think that it is better to get updates.  Even the online hp scan does not work. Find your computer and peripherals, it fails to find updates for you.   I have my hp printer works very well and set up properly and he always tells me that I need an update that I have.  HPSA would be great if it worked. Interesting that somehow Windows Update picked up that my computer had been messed up and showed two updates that were made some time it y a. I reinstalled and no problem from that. Thank you. I learn to my new hp!

• I can not open HP support assistant.

  I can not open HP support assistant. Get a message that says hpsf.exe has stopped working.  How can I fix it.

  Hello

  Try the following

  Firstly, uninstall your current version of HP Support Assistant using Microsoft 'Fixit' at the following link: this is particularly useful for correcting problems that may prevent resettlement on the machines running a 64 bit OS.

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  When this has completed, restart the laptop.

  Then download and install the latest version of HP Support Assistant of the page on the link below - the download links are to the bottom of the page.

  http://h18021.www1.HP.com/helpandsupport/HP-support-Assistant.html

  After installation, restart the computer again.

  Kind regards

  DP - K

• Disk defrag works not, taskmanager no opening, very slow downing load anything

  I've had problems with my computer for a while now and I don't know what else to do now, I'm trying this.  I sent this computer in Bridge 2 times now and this looks at what could be the third if I can't get all the answers.  The problems I have been having always start when I first try to defrag my computer.  It takes forever to defragment. I started it at 09:00 and it was not yet done at 20:00. I finally stopped him at 21:00 and it just sitting there like it was stuck.  now my task manager does not open and I can't get this thing to download something, including the microsoft fixit tools.  I am very frustrated.  I downloaded all execept serivce Pack 2 updates and this thing is everything to date.  any help would be great.

  Installation of the Service Pack 2 - that is where I would start. You say that you have downloaded all the updatesexcept this one, so with that one being later, it should correct a little (apart from a virus, etc.). An application that will help you realize what lack us isBelarc Advisor . I love it, because it produces a file html (on your own computer), and once it loads in your browser, you can print it out and have a list of all installed on your computer - and it includes what Microsoft Updates are installed and missing, with the version numbers for all of this. And it's free. :-)

  I'll make sure that Windows Defender runs, as a bare minimum (I thought Windows Security Essentials, being in agreement, but I uninstalled it because it made my Vista boot slowly and returned to the Defender). Vista is quite safe, however. If you buy a commercial product, I recommend Kaspersky (I don't use it myself, because I download a lot and I'm careful, but my mother has it on his computer and she's in all Big Fish Games and so on and got a nasty on her own a bit... virus) Until Kasperky was installed and took care of that - now it catches everything (so far)).

  Virus and others can make Windows run slowly. I've seen all kinds - some file after file replication, increasing the number and size of the files, the names of some really stealth and switching. But if it is not a virus that slows down your computer, it is really likely to be fragmented files. In this case, I would recommend Auslogics Disk Defrag . It's free and FAST.  You can defragment with a new and also OPTIMIZE files so that things run faster. Any defragger will take more time with the bigger hard drives. Windows Defrag takes too long. So doesn't the defragmenter in Advanced SystemCare 3(so uncheck the Defragmenter option if you run this, BUT I recommend highly this program because it will clean a lot of things for the better - remember do not check the boxes in the window popup resulting for the module of security... unless you know what you're doing , because not all these (Browser Helper Objects, etc.) are a problem. This program also includes a fixer shortcut, an application that allows you to see what programs are running at startup and much more. One of the best I've seen, and I used it for a few years now without a problem.

  These last two linked above will go a long way toward acceleration and optimization of your system. I run these two first and then restart. SystemCare has three main sections of things that can be run - she is really well organized. It "takes the trash", in other words. :-) It will get rid of unwanted files and increase the speed and solve common registry problems (something I was initially uncertain about when I got it, but after a few years, it was no concern - it cleans things upwards, and unlike other programs of registry).

  Another possibility: according to how you have set aside for virtual memory, if you get close to maxing out your hard disk space, you might find yourself in a situation where the computer is both need to write a lot on the drive and need more space, or space dedicated to virtual memory (I call it "the garbage area" where she must write and write about things older in this area) (as things are processed - this is temporary memory). Bottom line: If you are short on space and don't know what to do about virtual memory (and people use virtual memory to compensate for the fact that they do not have a lot of RAM |) Memory to play with), then let the system choose automatically the drive. To set it, you go to computer (aka My), right click and select Properties, and then when the system properties, click Advanced, then settings of Performance, then advanced once, then, virtual memory, select change. You can select automatic for ALL your drives, OR that the management system of the size for the selected drive. All readers do not have to have it, but whatever you select whether by car, it will create this sandbox of virtual memory paging on the same drive. Editing plan that will be used by the system to write things. Check the recommended size it compared to what is currently assigned. To play it safe, go with the recommended or let the system handle. Virtual memory can increase the speed and performance.

  I hope that these things help with some of your speed issues.

  (Note: the not not opening Task Manager, tells me that it might be a virus on your system, in which case you could look in these free programs:EMCO Maleware Destroyer andEmsisoft Anti-Malware (formerly A2 Squared) (full analysis is thorough and takes some time, but there is a quick analysis).) Lavasoft Adware, SpwareBlaster, Spybot Search & Destroy are also good.

• Screensaver not working only not with the hot corner

  I used to have my screensaver set to start with the upper left corner of my screen using the feature 'hot corner '.

  However, lately, he doesn't. I tested it with all the other corners, and it does not work.

  I tried other functions with the hot corners and they all work very well. This is just the screensaver that does not work.

  I can set the timer and lights up the screen saver, but not with the hot corner.

  Someone can help me with this, or have any suggestions?

  See you soon!

  Hello Kaijuman,

  Thank you for using communities of Apple Support.

  I understand that when you try to start the screen saver by using Active corners it is not. I would like you to test this behavior then starts in safe mode, and then try another user account on your Mac.

  Start in safe mode

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any key during startup

  How to test with another user account

  You can find out if unexpected behavior is related to the user file or a parameter in trying to reproduce the problem to a different user account. This process includes creating a new user account, connect to it and test for the issue.

  Create a test user account

  1. In the Apple menu, choose System Preferences.
  2. Click the users and groups in the System Preferences window.
  3. Click the lock icon and enter an administrator name and password.
  4. Click on the button Add (+) below the list of users.
  5. Choose a type of user in the new pop-up menu.
  6. Give the user a name and first name, account name, and password.
  7. Click OK.
  8. Close the System Preferences window.

  Connect to the test user account

  Log out of your current user account by choosing logout in the Apple menu, and then open a session the new account that you created. If you are prompted to login with your iCloud or Apple ID account when you log in, skip this step.

  Try to reproduce the problem

  Please let us know what the outcome is so we can help you.

  See you soon.

• Several update failures, sfc scan in safe mode not working do not with a WRP, new error 80070570 installation error. USB installation failure...

  I don't know why but it questions

  (1) the win 7 install dvd (retail), it comes with an error 80070570
  (2) Usb key with win7with sp1 do not fare any better either
  (3) several chess update with error with no. support messages either.
  I tried all known and a few new patches, it comes
  Scan of SF,
  Hot Fix
  Update device drivers
  RAM memory modules
  Repair installation
  Recovery Console
  Safe mode startup
  Isolation of CBS newspaper.
  Reformat and reinstall at least 20 times on 3 separate hard disks
  MB reset
  Incremental update
  SP1 iso dvd and usb stand-alone installation
  Check disk and every known, all make mistakes recovery console on NEW and OLD INSTALLED IN WIN7
  Distribution
  Virus on, defender of victory off the coast
  Safe mode / with all combinations on
  Microsft onseven and support forums
  I'm starting to think that this could be a deliberate attempt to make me go buy win8
  I need help please
  Krish

  Hello

  1. the Microsoft updates you aren't able to install?
  2. What is the accurate and complete error message you get?
  3 have. what troubleshooting measures you tried to solve the problem?

  I suggest you try to install the updates to the clean boot. Clean boot helps eliminate conflicts of software that occur when you install a program or an update or when you run a program in Windows. You can also troubleshoot or determine what conflict is causing the problem by performing a clean boot.

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135

  Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode.

  I hope this helps. Let us know if you have other problems with Windows in the future.

• Windows 7: Wifi works is not in safe or normal mode

  Hello

  After a BIOS recent update HP my Wifi (light-F12 key) was first released in normal mode, but it still worked in safe mode. Then after a few fault-finding, he then went out in safe mode! I have a F12 button that works as a button on / off for Wifi, is 'white', is "red". Currently affects in break mode and does not turn white.
  I tried the following methods to try to get it working again, but nothing helps: -.
  Device Manager: network card: Realtek PCIe FE Family Controller - uninstall > restart > reinstall * Wifi does not
  Network adapter HP and Realtec driver update * both completed successfully. WFII does not
  Restore Windows to previous 1 month * restore complete. WiFi doesn't work do not
  BIOS check to make sure that the adapter is enabled * adapter "Enabled". WiFi doesn't work do not
  BIOS check keys F * F keys ok. * Wifi does not
  COMODO antivirus, uninstalled and reinstalled * Wifi does not
  Then I took drastic measures back the laptop to the factory setting and by a return to the top of an external drive. Last backup date was June 2013. * This does not solve the problem either.
  Is my laptop spec:
  HP Pavilion G6 series
  Name of the operating system Microsoft Windows 7 Home Premium

  Version 6.1.7601 Service Pack 1 Build 7601

  Another Description of the OS is not available

  Manufacturer of operating system Microsoft Corporation

  Name of GRAHAMSMART-HP system

  System manufacturer Hewlett-Packard

  HP Pavilion Notebook PC g6 model system

  System Type x 64-based PC

  Processor AMD E2 - 3000M APU with 2 logical processors, 2 Lossnay, 1800 Mhz, graphics HD Radeon (TM)

  BIOS Version/Date Insyde F.6A, 13/05/2013

  SMBIOS Version 2.7

  Windows directory C:\Windows

  System directory C:\Windows\system32

  Boot Device \Device\HarddiskVolume1

  United-Kingdom-regional settings

  Hardware Abstraction Layer Version = "6.1.7601.17514".

  User name GrahamSmart-HP\Graham chip

  Time zone GMT time

  Physical memory (RAM) installed 4.00 GB

  3.48 GB total physical memory

  2.14 GB available physical memory

  6.95 GB total virtual memory

  5.16 GB available virtual memory

  Page file space 3.48 GB

  Paging file C:\pagefile.sys
  My router is fine my other past of the laptop works perfectly and makes my Iphone. Please can you help as I am at my wits end. I know it must be something to do with the software, as it worked fine, then stopped working in normal mode, but worked in safe mode. Then stopped working in safe mode also.
  LAN cable connection works very well with the laptop.
  Thanks for the advice/help you can give me
  Graham

  According to what you have done, I suspect a hardware problem, possibly with the onboard wireless adapter.

• Function of ' play to ' Media Player works only not with the music on external drive

  Hi, I have not been able to "play to" music files stored on my Seagate external drive to a receiver AV Pioneer... "Play"works very well with the stored music files on my drive c of the laptop. Music on my external hard drive will appear in my library. Have laptop Windows 7 with Media Player... any help appreciated... .thanks

  Hello

  Do you have any application installed on the computer security?

  Method 1:

  If you do, I suggest you to disable anti-virus and check if it solved the problem.

  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  If the step is not enough, then you can go to the method 2:

  Method 2:

  I suggest you go through the steps and check.

  a. closed Windows Media Player12.

  b. Access Services [table-> system and security-> administration-> Services tools]

  c. find the service named "Windows Media Player Network Sharing Service"

  d. stop the Service manually.

  e. Locate the "UpnP device host"service. Stop the service and restart it.

  f. run "Windows Media Player Network Sharing Service" now.

  g. close windows all associated and the Panel. Open Windows Media Player, right click on a playlist and see if the Play option lists the TV. Try to play now.

  Hope this helps and keep us posted.

• Broadband Samsung ATIV 700 windows mobile 8 works do not.

  I have the above legacy with built in mobile broadband. It's the second currency since the first was defective for the same reason, no mobile broadband.

  I have the new sim card (works fine in my iPad) 3 (broadband service provider) have also tested, it works fine.

  Once installed my Tablet does not show mobile broadband, I think this is the driver HUAWEI Mobile which is a failure, I get the message troubleshoot you it has a defect, when I it, it re installed and still does not work.

  How can I correct the?

  Thank you

  Hello Steve,.

  This could be caused due to the compatibility of the driver. I suggest that you check with Samsung support for more information about the issue.

  https://www.Samsung.com/us/support/contact

  I hope this helps you get the fixed number. If you have other problems with Windows, please post in the Microsoft Community. We would be happy to help you.

• iPads not working only not with the cache server

  Hello!

  We have implemented a Server Cache El Capitan... And the strange thing is that it works with macs and iPhones but not with iPads! Has anyone of you ever heard of something similar?

  Thanks in advance!

  Carl

  It works with macs and iPhones but not with iPads!

  There are many variables that affect how to find caching servers Apple devices.  Signed iPads on the same account iCloud like Macs and iPhones, or more precisely, are the accounts that iPads are signed in registered in the same country as the public IP address of the server being cached?  If your organization uses multiple public IP addresses, are the server cache and your DNS server set up correctly in what concerns these addresses?  Did you restart the iPads after implementation of the caching server, so that they immediately "forget" that they have found no update server caching and are forced to review?  (Restart devices - not the server!-is also recommended if you change the public address record in DNS.)  IPads use a different local subnet as other devices, maybe a caching server is not configured to serve?

  We can help you, but we need more information.

• HotSpot iOS 9.3.1 works do not with Cisco AnyConnect

  Does anyone else have this problem? Since the upgrade to 9.3.1 iOS I am more able to use one of the hotspot from my iPhone to connect to the VPN from my company using Cisco AnyConnect.  I can still connect via Wi-Fi, but not with the iPhone 5s or 6s hotspot feature.

  Ideas?

  TIA,

  DM

  Hello, I'm from the Italy, and I have the same problem on my 5 64 GB iPhone.

  I have updated to iOS 9.3.1 and now I don't have the Hotspot feature in the phone settings Menu.

  What is happen? I work with this feature and now I need to change the phone!

• LifeCam vx 5000 works do not with tinychat

  Earlier today, I bought a lifecam vx5000, I set up and installed without problems, but I can't use it in tinychat.

  I've set up correctly, but I'm the only person who can see my cam. This question doesn't work with tinychat, it is going to work very well with programs like YIM and others, is it all just not compatible?

  Any help would be appreciated

  Hi acidnation,.

   
  As there is no problem using webcam with other programs, there must be some parameters of the tinychat to configure with tinychat webcam to work properly. We recommend that you double check that the settings for the webcam to tinychat or settings in tinychat to set up the webcam.
   
  For further assistance on tinychat, see contact information: http://tinychat.com/about.html
   
  I hope this helps.

   

  Kind regards
  Syed - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems with HP4620 not working only not with the other computers in the House

  I bought a HP 4620 for my house and it works very well with my Vista laptop wireless.  However, it does not show as an option for our office or our second laptop.  Any ideas?

  Thanks, Sunny12

  Hello sunny

  I was going through your posts and help you've been putting online...

  Answered by Mr. Aneesh, pilots refers to the software that we are supposed to install in the computer.  Thus, these drivers are available on the CD that you have with your printer...

  Now, as you begin to install, you will get the screens user friendly and just follow the instructions and proceed with the installation.

  The system, that is to say; the monitor (computers) will ask you how you are going to connect the printer to the computer...

  Thus, there are 2 methods by which you can connect your printer to the computer...

  (1) USB - this is a cable that you find in the box the printer, but you would have to buy separately.  so, if you do not, please get one of the stores.

  (2) wireless - in this type of connectivity, you do not need the USB cable, because you would then have a device called a 'router '...  And here... It is the router that establishes the communication between the computer and the printer.

  Please try the following and if you get stuck, let us know.

  Kind regards

  Ashokkan.

  Help the community by marking this post.
  Your question has been answered? Mark it as an acceptable Solution.
  See a great post? Give it a Bravo!
  I work for HP

• Active state with menu manual not working does not with child pages

  I created a horizontal menu manual on my master page with two links (at WORK and about me). I did them manually as it was the only way I could work out how the style and the menu items to distance as I wanted. I created an active state that works for the main page WORK and the about me page.

  However, I have four child pages under the work, but when you click on one of them that the active State for labor (a green line under work) does not appear. When I return to the menu options to try to "solve" the problem and choose "All pages" all child pages appear in the main menu I want and does not solve the problem. I chose manual that I could put the line to show that under the term of WORK and not all field.

  Here is my Web site to demonstrate the problem: www.robertgreens.com

  Any help to fix this would be appreciated with gratitude!

  I managed to solve this problem (with the help of Live Chat Support). I needed to create an autour work and provide a 'normal' State which resembled the active state, so when you click on the pages of the child, it looked like work page parent menu (with a green line) below. This meant that I had to duplicate master page and do the same (deletion of the green line in the menu of work) for the words Me page. And now, everything looks the same: www.robertgreens.com