The NEC uf000x diskette device is showing to work correctly. However, it does not show in windows Explorer. I can't read any disks or even format.

Similar Questions

• Windows displays the device works correctly. However, the device does not appear in windows Explorer. also, I can not format disks.

  Windows displays the device works correctly.  However, the device does not appear in windows Explorer. also, I can not format disks.

  What should I do next

  Hello

  1. Are you referring to the NEC USB Floppy Driver?
  2. You try to format floppy disks?
  3. Was - this earlier work, if so, did the chnages on the computer before this problem?

  If it worked, I suggest the following methods and check the status of the issue.

  Method 1:

  Open the hardware and devices troubleshooter.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Update a hardware driver that is not working properly.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• I want to connect my Macbook Air (IOS 10.9.5) with my amp stereo House (TEAC I-501DA), which has a USB connection. I followed the steps described in the manual TEAC to install the driver and my Mac says it is installed correctly, but it does not appear I

  I want to connect my Macbook Air (IOS X 10.9.5) with my amp stereo House (TEAC I-501DA), which has a USB connection. I followed the steps described in the manual TEAC to install the driver and my Mac says it is installed correctly, but it does not appear as an option in the preferences/system sounds.

  Version 1.1.2.2 El Capitan driver support, then why don't upgrade you your MacBook Air to El Capitan?

• I accidentally change the main drive d LABEL: volume 1 label D: (C :) AND IT does not FIND C:\Windows\system32\rstui.exe. How can I find this path?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages - Windows cannot find C:\Windows\system32\rstui.exe «»
  • Recent changes made to your computer: I accidentally change the main drive d LABEL: volume 1 label D: (C :) AND IT does not FIND C:\Windows\system32\rstui.exe. How can I find this path?
  • What you have already tried to fix a volume control simple back - I tried things like this before as to cause major problems. I'll do it right the first time.

  Read this tutorial carefully. Hpoefully it resolve issue you. I have no knowledge on this topic. Only offer you a tutorial of a VERY worthy site.

  How to add, change, or remove a drive letter in Vista

  http://www.Vistax64.com/tutorials/114767-drive-letter-add-change-remove.html

  t-4-2

  PS Sorry for the huge impression. A small bug in copy/paste.

• I have the latest version of Camera Raw in CS6 Extended, but still, it does not open my pictures. What can I do?

  I have the latest version of Camera Raw in CS6 Extended, but still, it does not open my pictures. What can I do?

  Thank you, but I actually solved the problem by using the hotfix installer.

• Combo DVD/CD drive does not appear in Windows Explorer or the Device Manager

  The combo DVD/CD on my laptop drive isn't in Device Manager or Windows Explorer.  The door is not ejected.  You must use a paperclip, poking into the hole to open it.  I also re - it sitting, but it changed nothing.  We had this laptop for 1.5 years and the disk worked great until yesterday when trying to install Starcraft II.  Installation failed and it has messed up also the DVD/CD drive.

  We read some other difficulty advice and tried the upper and lower filters in the registry, but there was no entires of upper and lower filters in the key.

  The specifications of the laptop are:

  HP Pavilion dv7

  Processor Dual-Core Mobile RM-72 2.10 GHz AMD Turion X 2

  4 GB OF RAM

  64-bit Windows Vista

  Hello

  Check with HP Support, their online documentation and drivers, and their known forums
  questions.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Nothing does not open in windows 8, I can't turn it on, can not change the tiles, cannot update windows 8

  What the hell is going out with me I don't understand I own 8 64-bit windows I can't activate it it displays the 0x800705B4 error code, I can't solve the problems it shows code error 0 x 80070002, I can't open my pc setting, I can not open any application of it When I try to update windows 8.1 it shows "sorry, this update is not available for your pc, you can run windows edition that does not support the update, what do I do I want to break my computer, can someone help me please? Please its my big request?

  You should not accept a computer on which the operating system is not activated and nothing works on it.

  I suggest that return you it to the shop and asked that Windows be correctly installed and activated.

  See you soon.

• Windows 7. I add a hard drive not formatted to my computer. He is recognized in the BIOS and Device Manager, but does not appear in windows Explorer. How should I proceed? Advice please.

  Windows 7
  HARD disk: Samsung Spinpoint 250

  Make a right-click on the icon my computer

  Select manage in the 'breath' menu

  In manage, select disk management

  from that, you can then complete implementation, partition and format the new hard drive.

• While the iPhone overseas requires a reactivation, which sometimes works, but more often does not work. At the beginning he said that my SIM card was not supported by the activation policy assigned by the activation server.

  iPhone 6

  Network: Verizon

  iOS 9.3.3

  Twice now, once in Costa Rica in April and, more recently, in Ireland, while that phone overseas warning reads as follows:

  "your iPhone could not be activated because the activation server is not reachable. Try to connect your phone to the iPhone to activate it, or try again in a few minutes. If the problem persists contact Apple Support to Apple.com/support. »

  or:

  "The SIM card that you have currently installed in the phone is a carrier that is not supported in the title of the activation policy that is currently assigned by the activation server. This isn't a problem with the hardware with the iPhone. Please insert another card from a supported carrier SIM or ask this iPhone be unlocked by your operator. Please contact Apple for more information. »

  My carrier is Verizon and I replaced the SIM card on my return from Costa Rica end of April despite the fact that the card is unlocked and good, in theory, for international travel,

  Before you activate the phone is locked and I can't access applications like camera, that, when I travel, I need over the phone.

  Apple says call Verizon. Verizon said, you guessed it, call Apple.

  When I return to the States, everything works fine. I thought that the replacement of a SIM card would do the trick, so you can imagine my dismay when the activation warning came after I took the phone off airplane mode after I landed in Dublin and the activation warning came new.

  What is going on?

  kennypg wrote:

  iPhone 6

  Network: Verizon

  iOS 9.3.3

  Twice now, once in Costa Rica in April and, more recently, in Ireland, while that phone overseas warning reads as follows:

  "your iPhone could not be activated because the activation server is not reachable. Try to connect your phone to the iPhone to activate it, or try again in a few minutes. If the problem persists contact Apple Support to Apple.com/support. »

  or:

  "The SIM card that you have currently installed in the phone is a carrier that is not supported in the title of the activation policy that is currently assigned by the activation server. This isn't a problem with the hardware with the iPhone. Please insert another card from a supported carrier SIM or ask this iPhone be unlocked by your operator. Please contact Apple for more information. »

  My carrier is Verizon and I replaced the SIM card on my return from Costa Rica end of April despite the fact that the card is unlocked and good, in theory, for international travel,

  Before you activate the phone is locked and I can't access applications like camera, that, when I travel, I need over the phone.

  Apple says call Verizon. Verizon said, you guessed it, call Apple.

  When I return to the States, everything works fine. I thought that the replacement of a SIM card would do the trick, so you can imagine my dismay when the activation warning came after I took the phone off airplane mode after I landed in Dublin and the activation warning came new.

  What is going on?

  I think it's a problem with Verizon.

  Our company is on AT & T - and our lawyer have travel all over the world, Africa, London, South East Asia and they have never complained to me than before.

• my free cell game does not work correctly. column 2 does not accept cards and the fifth column freezes the background map, so it cannot be moved

  cell game free on my vista desktop computer (PC HP Pavilion 26712f-b beam)

  Hi, try to play the lonely spider... its more interesting...

  jokes aside, you can try in safe mode and thn try to uninstall and reinstall games using the link belowhttp://windows.microsoft.com/en-us/windows-vista/Turn-Windows-features-on-or-off

• WD MyBook 1 TB recognized, "working properly" shown on workstation, but do not show in Windows Explorer

  I have a HP Elite running Windows 7 (SP1) Intel Quad and 8 GB of Ram. I connected a WD MyBook 1 TB drive that was connected to my dish system to record programs. I plugged in my system using both the USB and IEEE1394 ports with the same effect. He reconnizes the drive, says it works correctly and shows the drivers are up to date, but it does not appear in Windows Explorer. Reboots have no effect. Says it works, shows on the system in my computer, but not workee.

  Tell you in Computor its devices listed under removable...?

  Is it detected in managing disks and an assigned drive letter?

• Using the function of scan macOS Sierra HP Officejet 7300 series network printer does not work; He had no problem with El Capitan...

  Printer HP Officejet 7300 network series that allows to work flawlessly with El Capitan does not work after the upgrade to Sierra.

  With macOS Sierra, when used as a network print service printer works fine however scan does not work. Programs like the Image Capture, HP Easy Scan etc does not see the printer. However, if the printer is directly connected to the Macbook Pro using the usb cable, a new printer is added to the list of printers (it shows print and scan functions while the printer network in the list shows only printing function) and the scanner works well with Image Capture, etc. If the usb cable is removed disconnects this printer in the list and there is no way to turn it on. I have the latest update for the printer installed from the App store. It looks like a driver issue, but I wonder if there is a work around for this problem...

  Open Preview.app. Under file in the menu bar, you see import of 'name of your scanner?

• In version 13.0 is selected the option "when Firefox starts to show my windows and tabs from last time", but I always get default page of Firefox.

  Even thought is selected the option ' when Firefox starts to show my windows and tabs from last time "I always have the default page of Firefox.

  Hi Goldie_,

  I guess you don't watch this page when you closed Firefox last time. Also that you are not in private, correct navigation mode? Looks like it is maybe a problem with Firefox being able to save your file pref.js. You should try the steps listed in the preferences section that won't save trouble. Try and let me know how it goes.

  Hope this helps!

• Hi, I'm trying to put a song as my ringtone but I can't find the option "show in finder". Instead, it's show "show in windows Explorer..." Help, please... :( I use iphone with ios 5 9...

  Hi, I'm trying to put a song as my ringtone but I can't find the option "show in finder". Instead, it's show "show in windows Explorer..." Help, please... I use the latest version of itunes on windows 12.3 8...

  You won't show in Finder on Windows option. Use the one you have - display in Windows Exploler.

• VMnet1 and 8 does not appear in Windows 7 connection to the home network

  Can someone help me please, I'm new on a virtual machine, I installed VM 9 and degraded to 7 as well, but in two time I am not able to see vmnet1 and vmnet8 in my windows 7 (cards) host machine network connections, I can see that these are present in VM Editor, when I'm clicking 'Connect a virtual adapter for this network' I'm seeing connection host becomes connected but soon I hit the application button we disappeared.

  ipconfig/all is not showing me the vmnet1 and 8 adapters as well, I tried to install this from the Device Manager, but I can't

  Every single option that I know that I used as services, Device Manager, disable the firewall, antivirus, reinstall, bios check, google search, but I get no answer.

  I use Windows 7 Core i7, I checked the bios and VT - x is activated, CAN ALL ONE please PLEASE HELP me, I really appreciate it,

  Atif

  I don't think it's a driver problem, because VMware Workstation - like any other Windows application - takes advantage of Windows features for networking and does not separate NETWORK interface drivers but only services that use default API.

  Have you tried to completely uninstall VMware Workstation (using the command line option / clean ) before installing another version? And have you installed using 'Run as Administrator' to make sure that it is not a permission problem. You can also read
  http://faq.sanbarrow.com/index.php?solution_id=1113. Although it is for version 7, most of the points still apply.

  André