Windows Embedded POS ready 2009
Last year I had successfully installed a loan in 2009, but since it was a trial that is no longer working and I tried to install a new POS Embedded Windows system but to the reboot I always end up with a blue screen.
I had tried with a partial disk configuration and configuration of disk full, but none works.
Someone at - he had similar experiences and what can be done for this install correctly on a virtual machine?
Thank you
\Manfred
A STOP 0x0000007B error means that Windows is not able to find the startup disk. This can occur if Windows does not have the correct driver installed for the (virtual) storage card.
This can happen if you create your guests with a SCSI LSILogic (virtual) adapter and then forget to install the SCSI driver that is appropriate during the initial installation of Windows.
If I had to guess, I would say that the Assistant new VM in VMware correctly detects the operating system on your installation CD, and the autoinstall process is therefore not get the appropriate SCSI driver installed.
Try to re-create your guest, but in the course of the new Virtual Machine Wizard, select "I will install the operating system later". Which will allow you to manually choose the type of hard drive that you want to install (Buslogic SCSI, IDE or SCSI free). Windows XP comes with the IDE and Buslogic drivers out of the box (if I remember correctly).
Tags: VMware
Similar Questions
-
How to change status 'Supported' NLA authentication in Microsoft Windows Embedded POS ready 2009?
Hello, Blue8112,
This question of fact in the TechNet Forum. They will be better able to help you.
Windows OS?
If we are talking about Windows XP SP3, then you must activate the CredSSP on your client:
http://support.Microsoft.com/kb/951608Enable-WSManCredSS
http://TechNet.Microsoft.com/en-us/library/dd819517.aspx
POSReady 2009 Deployment Planning Guide -
How to upgrade windows XP to WINDOWS EMBEDDED POS ready 2009
Hello
We have a customer with 70 locations that they run it Point of sale machines with Windows XP SP3. We need improve their POS to WE - POS 2009 loan since it is always supported available for 2 or 3 years more. If someone has already done or regardless of whether you have a documentation to the steps in the upgrade procedure to not I would really appreciate it because I couldn't find this online material I that I should try in the community,
Any help will be greatly appreciated.
Thank you
Syed Sherazi
Hi Syed,
The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the best support.
http://social.technet.Microsoft.com/forums/en-us/home?Forum=POSReady
Thank you.
-
I can't import Windows Embedded POS ready 2009 in MDT 2012
When I try to import a complete set of source files in MDT2012 workbench, it gives me the following error:
Operation 'import' on target 'Operating system '.
System.Management.Automation.CmdletInvocationException: Index (based zero) must be greater than or equal to zero and less than the size of the argument list. ---> System.FormatException: index (based zero) must be greater than or equal to zero and less than the size of the argument list.
at System.Text.StringBuilder.AppendFormat (IFormatProvider provider, String format, Object [] args)
at System.String.Format (IFormatProvider provider, String format, Object [] args)
at Microsoft.BDD.PSSnapIn.DeploymentPointError.InvalidOperatingSystem (String path)
at Microsoft.BDD.PSSnapIn.ImportOperatingSystem.Import (String sourcePath, String directoryName, Boolean moveDirectory)
at Microsoft.BDD.PSSnapIn.ImportOperatingSystem.ProcessRecord)
at System.Management.Automation.CommandProcessor.ProcessRecord)
-End of the exception stack trace internal-
to System.Management.Automation.Internal.PipelineProcessor.SynchronousExecuteEnumerate (input object, errorResults from Hashtable, Boolean list)
at System.Management.Automation.Runspaces.LocalPipeline.InvokeHelper)
at System.Management.Automation.Runspaces.LocalPipeline.InvokeThreadProc)The comment forum is not the place to ask technical questions. If you have a Microsoft Deveolpment Toolkit 2012 issue, the right forum is http://social.technet.microsoft.com/Forums/en-US/mdt/threads
-
What version of Media Player run the POS ready 2009
POS Ready does not come with Media Player. I need download the correct media player.
Hello
Please see the link below.
http://www.Microsoft.com/windowsembedded/en-us/evaluate/Windows-Embedded-POS-ready-2009.aspx
-
POS REady 2009 - BITS can't be started
Hello everyone,
Microft updates fails because the BITS can't be started Erroer 1290 0 x 50)
Who has a solution?
Thank you
William
You will find a ready appropriate for WinXP/POS support in these forums: https://social.technet.microsoft.com/Forums/windows/en-US/home?forum=itproxpsp
-
POS ready 7 embedded limit Net Session
Hello
I'll put up Windows Embedded POS ready 7 32 bit on a POS terminal. I am working in a software company and currently our software POS works how is there a master-slave for terminals. We do this by implementing network drives to the other terminals, which in this case to use NET sessions. In some restaurants with terminals 5 +, we use server 2003 standard R2 such that she has 20 NET sessions.
My question is, what is the limit of session for POS ready 7? Now if I'm on this computer and run a "net config server" it shows me 10 sessions or Maximum logged on users. Is the limit to 10 because it is incorporated, or is the plug for POS ready 7? I ask this because I know that most of the versions of Windows 7 have a limit of 20.
Is there anything I can do to increase the limit of 7 loan POS?
Thank you.
Hello
The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer
It will be useful.
Let us know if you encounter problems under windows in the future. We will be happy to help you.
-
Hi all
I'll put up an industrial PC with reader CF card on the motherboard. The system come with a card CF 8 GB, XP SP2, Windows Embedded Standard 2009 installed. I want to keep this card as the master of the copy, so I buy a SanDisk CF Extreme 8 GB in replacement card. I managed to copy the image to the new CF card and make it bootable. However when XP is running, he still see the CF card as a removable drive C:\. Where as with the original card CF, the operating system see a fixed drive C:\. It's a way I can make the SanDisk CF card as a fixed disk, as I have a problem with the installation of the software.
Unfortunately no you can go see it as fixed disk. SanDisk sells only fixed disk via the OEM channel cards. you will need to contact one of their OEM distributors and buy a card of fixed disk mode.
-
If I have Windows Embedded POSReady 2009 license can I install Windows Embedded POSReady 7 on my device? Whether or not I need a license document saying that.
You should ask on the forum dedicated Windows Embedded:
-
Error in Windows Embedded studio this rchtx32.ocx cannot be saved.
original title: Windows Embedded studio
I try to install Windows embedded studio 2009 on Windows 2008 R2 (32 and 64 bit), and I get an error that rchtx32.ocx cannot be saved. I have cheked the directory that the file is in, run as administrator, including no correction of the problem. Has anyone else had this problem before?Hello
Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. Appropriate in the MSDN forums. Please post your question in the MSDN forums.
You can follow the link to your question:
http://social.msdn.Microsoft.com/forums/en-us/category/EmbeddedWindowsIt will be useful.
-
Windows Embedded features stranded
Hi all
I use Windows Embedded stranded in my POS machine. I want to know whether or not Turn Windows has or not function is available in stranded Embedded version.
Thank you
Cherif
Hello
You kindly post your question in the MSDN Embedded Standard Forums please.
https://social.msdn.Microsoft.com/forums/en-us/home?category=EmbeddedWindows
See you soon.
-
Windows Embedded Standard Service Pack 3
I use Windows Embedded Standard Service Pack 1 in my pos machine. I want to install a new application that is supports only Windows embedded standard service pack 3. I am trying to get the service pack 3 for windows embedded standard.
I can't find something. Is it available?
Please please someone help me.
Hi Omar,.
Since then, the query is related to Windows Embedded Standard Service Pack 3 installation. I would say that contact their support site to improve assistance:
http://TechNet.Microsoft.com/en-us/windowsembedded/dd632975
Thank you and best regards,
John
-
LabVIEW Runtime engine on Windows Embedded Standard 7 P 32 / 64-bit?
Any who tried never to install and run the LabVIEW Runtime Engine (2011 or later version) on Windows Embedded Standard 7 P 32 / 64-bit?
I'm trying to figure out if this will work, for example on a CX5120 PC Beckhoff embedded. I have to have some TCP/IP communication simple to exchange information with another PC, but nothing else, i.e. drivers, etc...
I hope that someone tried to do already. I don't have the right equipment now to check it out.
As NEITHER sells touchscreens with WES7 installed here: http://sine.ni.com/nips/cds/view/p/lang/en/nid/210551 it's pretty safe to assume that they used the RTE on WES7.
But yes, it is done.
-
I have more than 10 thin clients with Windows Embedded Standard 7 with IE8. We are running a web application that crashes with IE8. I tried the upgrade to IE9 or IE10, but during the upgrade process, it stops and fails to install. I also tried installing various other browsers such as firefox and chrome, but they fail during the instalation.
Is there a limitation with the installation of other browsers or IE upgrade with windows embedded standard 7?
Hi Billy,The question you posted would be better suited in the MSDN Forums. See the link.Hope this information helps you. -
Can not get my Sylvania windows embedded 7 smartbook to download files.
I have a Sylvania 7 '' Wireless Smartbook, running on Windows Embedded Compact 7.
Internet Explore cannot download files. It is said "website not found" when I try to download an attachment to email (Gmail, Aol, MS exchange web, etc.), or click on a link that should cause a file download start.
Hello
The question you posted would be better suited in the MSDN Forums. I would recommend posting your query on the MSDN Forum site:
http://social.msdn.Microsoft.com/forums/en-us/category/windowsembeddedcompact
Maybe you are looking for
-
HP Pavilion HPE h8-1111: Deffective WLAN Card
I've had a few confusing issues with my internet connection for a few weeks now: My computer seems to detect wifi networks (they appear in the Network Manager), but fails to connect because of an unknown factor. Basic troubleshooting informed me that
-
Desktop Intel Celeron 100 - 400A: how will I know if the ports are USB2 and USB3
I have an Imation USB 3.0 portable external hard drive. When I unplugged it today, at the front of my desk, he said she would transfer more quickly by using a USB 3 port. I have two usb ports on the front of the unit, three at the back and the other
-
password for bios HP Pavilion g6-1311ax Notebook PC gives me a code of 55054770 locked out, after the installation of Windows 10 upgrade.on window7 it worked fine, I never put a password. need help to get into the bios I thank you again once the code
-
How to avoid that don't Junk mail 2 weeks instead of him be removed without seeing me
I want to see my junk mail. I want to keep 2 weeks. Sometimes my Inbox oes does not recognize an address then it started in my junk e-mail folder.
-
OE version 6