Windows failed validation gunine

Similar Questions

• Windows has failed the windows genuine validation

  I wanted to open a file to windows 2007. Guest computer to download the compatible pack before you download. I did, but he says that windows failed the windows genuine validation. So I followed the instructions. My screensaver is also gone and there is no icon on the lower right side of the computer that says you may be a victim of software counterfeiting. How can I go further?

  Quote your full version of Windows (for example, WinXP SP3;) Windows XP 64 - bit SP2; Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.

  Assuming that "a windows 2007 file" means a file Office 2007, also specify your version of Office installed (for example, Office 2002 SP3).

  The foregoing despite...

  Please visit http://www.microsoft.com/genuine/ and click on the button to validate Windows or validate Office, and then restart your computer.

  If you were not able to validate, follow these steps:

  1. Download this diagnostic tool, save it to your desktop: http://go.microsoft.com/fwlink/?linkid=56062

  -Online Windows XP: double-click the executable file to run the tool.

  -Online Vista & Win7: right-click on the executable and select run as administrator to run the tool.

  2. after running the tool, click on the Windows or Office as appropriate and then click copy (to the Clipboard).

  NB: You can open a new file in Notepad, paste the contents of the Clipboard in it & keep for future reference.

  3 start a new thread in the appropriate forum of Microsoft Genuine Advantage and paste the results of the WGA or OGA data diagnostic in a detailed post tool: http://social.microsoft.com/Forums/en-US/category/genuine

  4 Troubleshooting specialist will analyze the data and recommend an appropriate solution.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• "Windows failed the genuine validation...". Go online and set now and get genuine Windows. »

  I get a message "Windows failed the genuine validation...". Go online and set now and get genuine Windows. "I have a copy of Windows XP that I bought in the store.  My computer came with Vista; When the hard drive crashed, I had the store install the copy of XP that I had bought earlier, instead of reinstalling Vista.  Why I shouldn't "genuine Windows" already?

  You have an installation made from a set of recovery discs Dell on a Hewlett-Packard machine.

  This facility has NOT been made using appropriate media and it is likely that this is what is causing your problems.

  Next time, the system displays as non-authentique try to use Update tool product key to make the real system-

  Use the product key update tool - http://windows.microsoft.com/en-GB/windows/help/genuine/product-key to change the key for that which concerns your COA sticker, and then to restart and to publish a new report MGADiag we can confirm everything went well

• Windows failed the genuine validation

  I use Microsoft Security Essentials, which now has "windows failed the genuine validation" and Windows Vista (TM) this copy of windows is not genuine. But I use the windows provided by Dell, when I bought the computer 3 years ago. What is the problem and how can I solve it?

  I use Microsoft Security Essentials, which now has "windows failed the genuine validation" and Windows Vista (TM) this copy of windows is not genuine. But I use the windows provided by Dell, when I bought the computer 3 years ago. What is the problem and how can I solve it?

  Suggestion only:

  Your question is more involved and should be handled in the forums of COMPUTING.
  If you care, please repost in the following forum:

  Microsoft Genuine Advantage forums

  http://social.Microsoft.com/forums/en-us/genuinevista/threads

  Also take a look at this:

  Activation by phone:

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html
  Go to step two - two Options

  Excerpt:

  If the automated Service is unsuccessful

  (A) if the activation service informs you that she has failed and cannot help with activation, then STAY ON THE LINE and your call will be transferred to an operator of activation which will help you to activate your copy of Vista. The operator will give you all the numbers to ID of Confirmation if they accept that your copy of Vista is legitimate.
  NOTE: The operator just explain your situation and what you did to require activation. (EX: hardware upgrade, installed Vista on a new computer after uninstalling it from the old one, etc...)

• This copy of windows has failed the windows genuine validation.

  I get the following messages.
  ' may be victim of software counterfeiting.
  This copy of windows has failed the windows genuine validation.

  I ran the diagnostic tool and published the result below.

  Diagnostic report (1.9.0019.0):

  -----------------------------------------
  Given WGA-->
  Validation status: invalid license
  Validation code: 50

  Code of Validation caching: 0xc004c4a2
  Windows product key: *-* - X86GK - BQ8R6-2B9W4
  The Windows Product Key hash: otwCjetUnKokH4sIRWWvF1Jh0mA =
  Windows product ID: 00426-067-9529674-86380
  Windows product ID type: 5
  Windows license type: retail
  The Windows OS version: 6.1.7601.2.00010100.1.0.001
  ID: {4FADFC09-2F9F-4762-A0F9-9A67FC2D625C} (3)
  Admin: Yes
  TestCab: 0x0
  WGA Version: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Ultimate
  Architecture: 0x00000000
  Build lab: 7601.win7sp1_gdr.130104 - 1431
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  WgaER data-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  WGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 100 authentic
  Microsoft Office Enterprise 2007 - 100 authentic
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files\Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {4FADFC09-2F9F-4762-A0F9-9A67FC2D625C}1.9.0019.06.1.7601.2.00010100.1.0.001x 32*-*-*-*-2B9W400426-067-9529674-863805S-1-5-21-4040323424-3826660273-1778398338HP-Pavilion,RK571AAR-ABA m7780nPhoenix Technologies, LTD. 5.0820070330000000.000000 + 000BF603407018400FA04090409Pacific Standard Time(GMT-08:00)03HPQOEMSLIC-CPC100100126A2E2BE3F5B56CEw6MDp4yS8TlZEZ8QEMOPF8jblKI = Microsoft Office Enterprise 2007 81599-871-1537561-65389 1

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 Ultimate edition
  Description: operating system Windows - Windows (r) 7, retail channel
  Activation ID: a0cde89c-3304-4157-b61c-c8ad785d1fad
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00426-00172-067-952967-00-1033-7601.0000-0742013
  Installation ID: 003244687483286725250224860754582221818646363405760155
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: 2B9W4
  License status: Notification
  Reason for the notification: 0xC004F200 (non-genuine).
  Remaining Windows rearm count: 4
  Trust time: 15/03/2013-14:00:31

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0xC004C4A2
  Beyond: PASS
  Event timestamp: 3:15:2013 13:30
  WAT Activex: registered
  WAT administration service: registered

  --> HWID data
  Current HWID of Hash: MgAAAAEABAABAAEAAAABAAAAAgABAAEAeqjOwrhH7Ngu9/omeKQkLlSZBIPgaXZYKoU =

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0x0
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  HPQOEM APIC-SLIC-CPC
  FACP SLIC-CPC HPQOEM
  HPET SLIC-CPC HPQOEM
  MCFG SLIC-CPC HPQOEM
  SLIC SLIC-CPC HPQOEM
  SSDT HPQOEM SLIC-CPC

  Yes the sticker of the product keys match the diagnostic report. I've been running this product for more than two years and now all of a sudden it is not valid?
  I recently had a problem with hard drive with this machine and had to reinstall the system and restore data from a backup. Is it possible that this has some how changed the PID at the origin of this problem?

  If I have no choice but to buy a new OS can spend to Win 8 or will I run into a question?

  As I said before, "No matter how long he ran 'okay'..." »
   
  Copies MSDN work very well - until Microsoft discovers that they have been used in a way not scheduled (they are sold by unscrupulous people who probably to sell at an attractive price in comparison to other copies - a lot of people don't care about questioning why they might be cheaper.)  Others may sell at the same price and make more money before disappearing).
   
  You have an MSDN copy.  Your PID has not been changed by restoring the backup.  ;-)
   
  You can try changing your product key of Windows 7 than on the sticker:
  http://pcsupport.about.com/od/osproductkeys/HT/change-Windows-7-key.htm
   
  Then try to activate by phone:
  http://www.SevenForums.com/tutorials/18715-activate-Windows-7-phone.html
   
  And come back to report to what past.

  What operating system do you have on the laptop before? You can get a Windows 8 upgrade for that - but I would not honestly - recommend it because the difference is quite obvious and you haven't checked your software and hardware is supported on Windows 8, I know. My recommendation for Windows 8 is to use * if * the system you have came from the manufacturer with it pre-installed. :-)

• Failed Validation of XP - Client4.6 - cvpnd.exe for C:\Windows\system32\vsinit.dll

  Windows XP Home SP2 - booted fail with the "attention 201. VPN required subsystem is not available. Unable to connect to a remote VPN server. "According to the documentation Cisco it said to reinstall the Client.

  I uninstalled the old client and reinstalled v4.6 and now the C:\Program Cisco Systems Client\cvpnd.exe (which is the Cisco Systems, Inc. VPN Service) fails on startup with the following error message: failed Validation of C:\Windows\system32\vsinit.dll

  I completely uninstalled and reinstalled the client, always VPN service not start and get the same error message. If I try to start it manually I get the same error message.

  Clues about where to look?

  Here is some info that I found from this URL:

  http://Forum.zonelabs.org/ZoneLabs/board/message?board.ID=inst&message.ID=24113#M24113

  Even if you do not use the product of Zone Alarm, I think you need to follow these steps anyway. Try it and tell me how it proceeds.

  Here is the content of the message:

  Reregister DLL files that are associated with Cryptographic Services

  To register .dll files that are associated with Cryptographic Services, follow these steps:

  1. click on start and then click Run.

  2. in the Open box, type cmd and then click OK.

  3. at the command prompt, type the following commands, pressing ENTER after each line:

  Note Click OK if you are prompted.

  Note Microsoft Windows 2000 does not include the Sccbase.dll file. If you are running a version of Windows 2000, omit the Sccbase.dll file.

  regsvr32 softpub.dll

  regsvr32 /u wintrust.dll

  regsvr32 /u initpki.dll

  regsvr32 /u dssenh.dll

  regsvr32 /u rsaenh.dll

  regsvr32 /u gpkcsp.dll

  regsvr32 /u sccbase.dll

  regsvr32 /u slbcsp.dll

  regsvr32 /u cryptdlg.dll

  regsvr32 /u softpub.dll

  output

  4 restart your computer.

  5. Click Start, run, type cmd in the Open box, and then click OK.

  6. at the command prompt, type the following commands (press ENTER after each command).

  Note Click OK if you are prompted.

  Note Microsoft Windows 2000 does not include the Sccbase.dll file. If you are running a version of Windows 2000, omit the Sccbase.dll file.

  regsvr32 softpub.dll

  regsvr32 wintrust.dll

  regsvr32 initpki.dll

  regsvr32 dssenh.dll

  regsvr32 rsaenh.dll

  regsvr32 gpkcsp.dll

  regsvr32 sccbase.dll

  regsvr32 slbcsp.dll

  regsvr32 cryptdlg.dll

  regsvr32 softpub.dll

  output

• to send a message that his stats: windows failed the genuine validation. Security Essentials will be disabled within 30 days

  I can't access word or other products. What is going on? I get a message that his stats: windows failed the genuine validation. Security Essentials will be disabled within 30 days...;

  I continuly pass a message to actavate windows and when I click it it just trying to sell me a copy I will have trobble with, what a load of s... it's new windows. I can't use my old windows on my new computer and new windows is not letting me put in place and are functioning normally. It will not open the old files.

  Work on getting your fixed Windows installation.  Go http://social.microsoft.com/Forums/en-US/genuinevista/threads then READ THE STICKY MESSAGES in this forum and follow the instructions to create your own thread (start a new post) and copy / paste the mgadiag report in your thread as well as a full description of your Windows Genuine validation problem circumstances.

• what it means when it says this copy of windows has failed the windows genuine validation?

  one day, I was Tremblay download off the internet, there are a few things but I had to install, not that I REALLY new what I was doing, lol. Finally anyway, now whenever I turn on my computer, after I login, HERE, on my desk, it displays a message saying - you may be victim of software counterfeiting. This copy of windows did not pass windows genuine validation. - This also prevents me to use any wallpaper and move my desktop icons! I am so angry about this because I have repeadietly, repeatedly reported this to microsoft with my email and also other places and STILL no HELP! the closest that I actually got was geeksquad, that's why I'm here now cuz they got leads here.lol.  now I just HOPE the Lord and someone here can you PLEASE HELP me? my email is * address email is removed from the privacy * thank you for your time

  See: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/windows-is-showing-as-not-genuine/cbd43297-0e4d-458c-8487-9168c4cd668d

• Windows search Windows failed to start the service on the Local computer

  OK, so it's a big, dirty and convoluted issue, so please bear with me. Any help is greatly appreciated! I start tearing my hair out on this one...

  I'm on Windows 7 Professional 64 bit
  UAC is set to the lowest level 2

  The other day I have problems with the search box in the start bar. It is more was to find excel or other office applications and also he wouldn't orders base as cmd or Notepad. Whenever I run a command it returns an error like this (not exact because I have the exact error message):

  Windows cannot find ': search query = cmd'
  
  I searched a little and tried to rebuild the index in Control Panel > Indexing Options. It does not work so I uninstalled Windows Search and reinstalled. What I found now, is that the indexing service would not start and if I tried manually start from services.msc I would get the following error:

  Windows search Windows failed to start the service on the Local computer
  Error 161: the specified path is not valid

  The event log showed me this Application error:

  Cannot initialize the Gatherer service.

  Details:

  The Temp folder is on a drive that is full or inaccessible. Free space on the drive or verify that you have permission write to the Temp folder. (HRESULT: 0 X 80070660) (0 x 80070660)
  

  Help!

  Thanks Samhrutha.
  Your proposed solution of editing the registry is the only solution I found to this day and still work.
  The only drawback that I want to emphasize is that this fix causes completely reset to its default settings of windows search.  Customizations to search what have been done by the user (e.g., windows search indexing user customizations options) will be lost.

  I am running Windows 7 Pro 64-bit and occasionally experienced the same error message ( windows cannot find ': search query = XXX ", where XXX corresponds to my search query) try to search through windows when start menu search box.

  Only recently, however, discovered one other cause possible/fix to this problem.
  Specifically, I discovered that the error of windows search resulting from the ADDITION of a NETWORK LOCATION on the local computer (for example, via the menu option "Add a network location" that appears when you click the file menu in a window of windows Explorer displays the contents of the local computer (corresponding to the "COMPUTER" icon). The CENTER of my computer SYNC settings have been defined to disable the synchronization of network or file 'offline' and I suspect that this setting is also part the cause of the error of research.

  To resolve this problem, simply tell windows search not to include the 'network' location in the search index.  To do this, one needs to access the settings of the windows search INDEX LOCATIONS (via Indexing Options-> change), then uncheck the box next to the network location (which on my computer starts as follows: oneindex: / / {s-1-5-21...)

  After unchecking this box, click on the OK button and then CLOSE the button to exit the Options of Index window.  After that the error message should hopefully not return.  If so, try restarting the computer and research to test again.

  Hope this helps!

  :)

  ~ rx

• Error: Failed validation of the AIR. Invalid namespace

  Hello

  Just downloaded and installed the Webworks 2.2.0 for Tablet OS SDK (https://bdsc.webapps.blackberry.com/html5/download/sdk) and v3.1 to Adobe AIR SDK from Adobe.

  When I tried to compile applications Webworks, I got following error:

  [C:\Program Research In Motion\BlackBerry WebWorks SDK for TabletOS\bbwp] bbwp... \test.zip
  [INFO] Parsing of the command line options
  [INFO] Bbwp.properties analysis
  [INFO] Validation of archive WebWorks
  [INFO] The analysis of config.xml
  [INFO] The application of filling source
  [INFO] Compiling applications WebWorks
  [INFO] Packaging of the record bar
  Error: Validation of the AIR is not
  \Temp\bar-app5208961890444725744.XML: error 102: space name invalid http://ns.adobe.com/air/application/2.7

  I have never such a problem before when using the Webworks SDK 1.x and AdobeAIRSDK 2.5

  I tried to change the namespace AdobeAIRSDK in C:\Program Research In Motion\BlackBerry WebWorks SDK for TabletOS\bbwp\AirAppTemplates\src\WebWorksAppTemplate-app.xml, but I kept getting errors:

  Error: Failed validation of AIR... error 102: space name invalid http://ns.adobe.com/air/application/3.1

  Error: Failed validation of AIR... error 102: space name invalid http://ns.adobe.com/air/application/3.0

  Error: Failed validation of AIR... error 102: space name invalid http://ns.adobe.com/air/application/2.9

  Error: Failed validation of AIR... error 102: space name invalid http://ns.adobe.com/air/application/2.8

  Error: Failed validation of AIR... error 102: space name invalid http://ns.adobe.com/air/application/2.6

  Error: Validation of AIR... failure error 305: initial window content SWF version 11 exceeds namespace version http://ns.adobe.com/air/application/2.5

  I Googled, it resembles a known problem in Adobe but I got are the fix for Adobe Flex development.

  How can I fix for SDK Webworks?

  Thank you

  This is usually caused by people simply crush their old AIR SDK installation instead of using a brand new installation of it and using our Installer. When you installed the SDK latest were you pointing to a pure install 3.1?

• Satellite A500-15N "windows failed to load.

  I turned on my laptop today and started the usual startup process.
  Toshiba - logo (press F2, F12)
  -Green windows loading bar

  Then the laptop displays a black screen and nothing happens.
  When I turned off the laptop and turn it on again I get a message saying "windows failed to load" then it gives me options to run windows normally or run restore windows.
  Restorations of Windows does not work when I try to run it.

  This already happened to me, and I had to use my backup restore CD to restore the laptop to originial. I want to try to solve the problem for good, if possible, though.

  I don't want to have to restore the phone whenever that happens and risk losing data.

  The laptop works fine when it is plugged in at all times.
  Twice now, happened when the laptop has been disconnected from the mains and the battery is running out of power.

  Any help would be greatly appreciated.

  You can start Windows in safe mode?
  If yes try to roll back OS to an earlier time using System Restore tool.

  You have to understand that we don't know what are you doing with your laptop and what may be due to such behavior.

• Windows fails to load, the loading screen bar after installed KB2479628 _

  Windows fails to load once installed KB2479628, my Dell BIOS boots then the loading loading bar continuously scrolls. After now the power button for 5 seconds and re-start the computer, Startup Repair tries to run and need to use system restore to properly initialize.

  I uninstalled the update and disabled for windows updates won't install the update on its own.

  • Never had a failure of the before update.
  • running a dell inspiron e1705
  • V8.0.6 IE / Win Vista SP2a

  Research on the update, it seems that KB2479628 is very important. Is there a reason that my system is not compatible with it?

  [1] [of Spybot's Tea Timer is] Enabled

  [2] I was running AVG previos version and previous version of Comodo until the current version of Comodo conflicted with AVG...

  A1. Please disable the Tea Timer of Spybot and leave this option unchecked for now. See http://aumha.net/viewtopic.php?f=26&t=32409

  NB: If you don't fully understand what Tea Timer does and how it does, leave it off in a way permanent.

  A2. Comodo Internet Security includes an antivirus application. You should NOT have more than one 1 installed anti-virus application & loading at startup. You tell me that you used to have Comodo Internet Security (antivirus, antispyware, firewall) AND AVG Free anti-virus installed at the same time?

  PS: Let us a favor & edit your first post above: replace KB2479268 KB2479628typos. Thank you!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• any ideas? Installation failure: Windows failed to install the following update with error 0 x 80070663: update of security for Microsoft Office System 2007 (KB972581). That's what I get away

  Installation failure: Windows failed to install the following update with error 0 x 80070663: update of security for Microsoft Office System 2007 (KB972581).

  
  

  any ideas?

  Suggestion: Try to do a repair of Office 2007 installation, then try the updates (after a reboot).

  How to install and repair 2007 Office features
  http://support.Microsoft.com/kb/924611 TaurArian [MVP] 2005-2010 - Update Services

• Service Pack 3 for Windows XP does not recognize that it is connected to the USB ports. I get a notice that something has been plugged, but Windows fails to recognize regardless of the question.

  Service Pack 3 for Windows XP does not recognize that it is connected to the USB ports. I get a notice that something has been plugged, but Windows fails to recognize regardless of the question.

  Disconnect all USB storage.

  Run this tool by do right click and choose 'run as administrator '.

  Of course, all first extract it:

  http://www.Uwe-Sieber.de/files/drivecleanup.zip

  If your XP is 32 bits, use the Win32 folder.

  Reset.

  If you still can't find the drive, assign it a drive letter in disk management.

• All of a sudden, I get a message windows needs validation.

  validation of XP

  All of a sudden, I get a message windows needs validation. When I try to make this get message that it is not authentic.

  I had this XP for a few years and it is very certainly authentic.
  Help would be appreciated

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 ) tool
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
  -* in your own thread *, please