Windows hangs intermittently and sometimes upwards down

Greetings!

Windows has been intermittently locking up and sometimes it will lock upward and the OS will crash.

What will happen, it's the computer will stop working, can't move the mouse, etc., but then come back.  Sometimes, the behavior of the cursor will change (showing pointer when it should be the line of text, or vice versa) and sometimes not.  There are times where it will happen immediately, and sometimes it won't happen for a long time, and sometimes not will be not at all.

The ONLY common thing I observed that I have usually have Firefox running and am browsing on the web, or running videos.  It seems that Flash might be involved, but it is difficult for me to say.

I have the XML and DMP files since the last accident of BSOD, but do not know where I would set those on this post.

Thanks for any help!

Stop 0 x 124 is a hardware error

If you are overclocking try to reset your settings to standard processor and see if that helps.

If you keep getting the BSOD here are things more than you may want.
This is usually hardware related, defective heat, memory or processor even if it is "possible" he is associated (rare) driver.

Stop 0 x 124 - what it means and what to try
Synopsis:
A "stop 0 x 124" is fundamentally different from many other types of bluescreens because it arises from a complaint of material.
Stop 0 x 124 minidumps contain very little concrete information, and it is therefore necessary to address the problem as a case of material in an unknown state of distress.

Generic troubleshooting ' Stop 0 x 124 ":

1) to ensure that none of the hardware components are overclocked. Material which is pushed beyond its design specifications - by overclocking - may malfunction in unpredictable ways.
(2) ensure that the machine is sufficiently cooled.
If there is doubt, open the side of the case (be aware of all the relevant conditions guaranteed!) PC and direct an electric fan squarely to the motherboard. Who will rule on most cooling problems (lack of).
3) update all drivers related to materials: video, sound, RAID (if applicable), NIC... anything that interacts with a piece of hardware.
It is best to run the latest drivers anyway.
(4) update the BIOS of your motherboard according to the manufacturer's instructions and clear CMOS.
Their website should provide detailed instructions on the brand and model-specific procedure.
(5) rarely, bugs in the operating system may cause "false positives" 0 x 124 events where the hardware wasn't complaining, but Windows thought otherwise (because of the bug).
At the time of writing, Windows 7 does not have to suffer from a defect, but it is nevertheless important to keep Windows up-to-date.
6) trying (stress) test these hardware components that can be put to the test artificially.
The most obvious examples are the RAM and HDD (s).
For the RAM, use the 3 rd-party memtest86 utility to run several hours a test value. (6-8 passes to stress the ram)
For hard drives, verify if CHKDSK /R finds any problems on (s), including "bad sectors".
Unreliable RAM, in particular, is mortal, as well as software, and anything other than a 100% clear memory test result is cause for concern. Unfortunately, even a 100% clear result the diagnostic utilities does not guarantee that the RAM is free of any defect - only that none have been encountered during the test passes.
7) as the last of the non-invasive troubleshooting steps, perform a "Vanilla" Windows reinstallation: just the OS itself without additional applications, games, utilities, updates, new drivers - or ANYTHING that does not come from the Windows 7 disc.
Who stops working mitigate the problem of the 0 x 124, jump to the next step.


If you run the "Vanilla" installation long enough to convince yourself that not a single 0 x 124 accident occurred, start installing applications and updates slowly, always stopping between successive additions long enough to get an idea of the question if the machine is still free of 0 x 124 breaks down.
Smash back, obviously the latest addition of software may be somehow connected to the root cause.
If the stop error 0 x 124 persist despite the above steps, and the equipment is under warranty, consider to go back and ask for a replacement that does not suffer periodic MCE events.
Be aware that want to perform the subsequent hardware troubleshooting steps can, in some cases, void your warranty:
(8) clean and carefully remove the dust inside the machine.
Reinstall all memory modules and connectors.
Use a can of compressed air to clean the RAM DIMM supports as much as possible.
(9) If all else fails, start removing items of hardware one by one in the hope that the culprit is something non-essential that can be eliminated.
Obviously, this type of testing is much easier if you have access to equivalent components in order to perform swaps.

If you are in the situation to have completed all the steps above without a resolution of the symptom, unfortunately the most likely reason is that the error message is literally correct - something is fundamentally wrong with the hardware of the machine.

Tags: Windows

Similar Questions

  • Windows XP explorer.exe keeps hanging, freezing and crashing

    Recently installed the new copy of Windows XP SP2 on a new SSD and updated to SP3. My old hard drive is used to store the data now. I also have an external hard drive. I have 4 GB of RAM installed (I know Windows uses only about 3).

    The problem I have is that whenever I try to transfer files, transfer files slows down a lot. I could transfer a 60 MB file with extension .db for my external hard drive on the internal storage drive and the file transfer will tell 10 seconds to 20 seconds remaining, and it takes forever. If I cancel the file transfer, sometimes, I'm unable to close windows Explorer, or change files or right click on the files. They can do a text "not responding" appear next to the title. Usually, my Start menu and task bar becomes disabled/inaccessible. I can't click on things, do a right click or use the windows key. Sometimes I have to force quit the explorer.exe, and sometimes it hangs on its own. The start menu disappears and if I have "explorer.exe" Task Manager, it opens a new window of Solution Explorer, but I have to restart to get everything working again.
    For my SSD, I use Samsung magician and have disabled disabled prefetcher, of indexing and my samsung magician set power settings. I updated the Intel controller for readers, and "Write cache" is enabled in the strategies of discs. I also tried to switch off the Protection of data for explorer.exe running, but it does not work and currently I have DEP on for everything. This suspension occurs sometimes, simply browsing through Explorer. I installed a 3rd party file 'ExplorerXP' Manager but met the same problem there. I also ran chkdsk and Defrag the interal storage disk. All my services are at their default settings.

    Thanks for the reply. I have only the OEM drive, so I can't run the System File Checker. I have run chkdsk, and everything came back fine. Regarding anti-virus, I was using windows security essentials.

    I went ahead and bought a new hard drive. I backed up my files on external hard drive, course deleted my SSD and formatted the embarrassing internal drive. Installed the new hard drive and installed the new OS on the SSD.
    With the new drive and installed former player, I noticed that still send me in trouble. It works, but is very slow when copy/transfer of large files. I unplugged, unless you know how I could make a use - for example to keep more small files less than 30 MB on it.

  • connection sometimes slows down and drops onec in awhile

    on a web site as now just everthing slows down and sometimes stops loses connetion HELP

    on a web site as now just everthing slows down and sometimes stops loses connetion HELP

    http://support.Microsoft.com/kb/314095

    How to troubleshoot possible causes of Internet connection problems in Windows XP

    also:

    http://Windows.Microsoft.com/en-AU/Windows/network-connection-problem-help#network-problems=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    Wireless and wired network problems
     
     

  • Right-click on photos, documents, icons etc. and the drop-down list takes 5 to 10 minutes to view and sometimes never. How to solve this problem?

    I right click on photos, documents, icons etc. and the menu drop-down selection to delete, rename, etc takes 5 to 10 minutes to display and sometimes never. How to solve this problem?

    Hello

    1. have there been recent changes to the computer before the show?

    I suggest to follow the steps provided and check if it helps.

     

    Method 1: Try to boot in safe mode and check if the same problem occurs.

    http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

     

    Method 2:

    If the issue does not exist in Mode safe mode then try to put your computer in a clean boot state.

    By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
    http://support.Microsoft.com/kb/929135

     

    Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

    Hope this information is useful.

  • When I opened my favorites fall down and he is bigger than the window of Firefox and I click on a bookmark bookmark fall down closes, but remains a ghost image

    When I opened my favorites drop down and he is bigger than the window of Firefox, and I click on a bookmark bookmark dropdown closes, but a ghost of the part of the bookmark image that is outside the window of firefox on the office remains, by pressing F5 to refresh the screen it will erase, but shouldn't have to do that. Using the latest version of Firefox (15)

    Try disabling hardware acceleration in Firefox.

  • Whenever I have shut down my computer, I am disconnected from Windows Live Messanger and must manually connect at the beginning of my next session.

    Question asked by Neil Clark (me)
     
    I selected the option Connect automatically in Windows Live Messenger when I turn my computer. Whenever I have shut down my computer, I am disconnected from Windows Live Messanger and must manually connect at the beginning of my next session.

     
    ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
     
    Sunday, August 22, 2010 01:54
     
    Windows Live K - Ann C response.
     

    Hi Neil,

    This error occurs usually when a record has been changed when an update has been performed on your computer. To resolve this issue, follow these steps:


    Important:     before you edit the registry, make sure to save, to understand how to restore the registry if a problem occurs.

    Warning: If you use the correct registry editor, you may cause serious problems may require you to reinstall your operating system. Microsoft does not guarantee that you can solve problems that result from the use of the Publisher of the registry incorrectly. Use the registry edit at your own risk.


    BACKUP REGISTRY KEYS:

    1. click on Start, click on run

    2. type regedit and click Ok

    3. in the registry editor window, click desktop on the left side to make sure that you backup all the registry keys.

    4. click on file and click on export

    5. save the file on your desktop or in your desired location. It will have the default extension (* .reg) to back up the registry.

    6. If you want to restore a file to the registry, in the Registry Editor window, click file and click Import

    7. navigate to the location and find the name of the file with the .reg extension and click Open.

    Note: you will be prompted that importation has been properly registered in the register.


    TROUBLESHOOTING STEPS:

    1. open the registry editor by clicking on Start, then run. Type regedit and then click OK.

    2 open the user Shell Folders folder. To do this, click on the + sign of each of the products listed below.

    a. click on the [] sign + next to HKEY_CURRENT_USER

    b. scroll and click on the [] sign + next to Software

    c. scroll down and click on the [+] sign next to Microsoft

    d. scroll down and click on the [+] sign next to Windows

    e. scroll down and click on the [+] sign next to CurrentVersion

    f. scroll and click on the [] sign + next to the Explorer

    3. click on the User Shell Folders. A list of entries appears on the right side. Double-click AppData.

    4. the value data, type the following entry, and then click OK: %USERPROFILE%\Application Data

    5. close the Windows Registry Editor and restart your computer.

    Thank you

    K Ann C.

     
    ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------

     
    Thursday, August 26, 2010 09:27
     
    Response from Neil Clark
     

    Hi K - Ann,

    Thank you for the above information.

    I followed you instruction to back up the registry keys, but when I followed step number 7. Navigate to the location and look for the name of the file with the .reg extension and click Open, the message of answers that I received from the registry editor has been as follows: -.

    Impossible to import C:\Documents and Settings\Compaq_Owner\My Documents\My Backup\Backup260910.reg of register: not all data was successfully written to the registry.  Some keys are open by the system or my other processes.

    So I closed my computer and restarted. I then followed your instructions again (this time save the backup of the registry to a member in the same library, called "Backup260910bkup"

    Yet once, when I followed the number of the step 7. Navigate to the location and look for the name of the file with the .reg extension and click Open, the message of answers that I received from the registry editor has been as follows: -.

    Impossible to import C:\Documents and Settings\Compaq_Owner\My Documents\My Backup\Backup260910bkup.reg of register: not all data was successfully written to the registry.  Some keys are open by the system or my other processes.

    Can you tell me what I need to do to work around this problem of backup of the registry?

    I look forward to receiving your response.

    Thank you

    Neil Clark.

     
    ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
    Monday, August 30, 2010 22:19
     
    Response of Windows Live Mechell P.

    Posted by Neil Clark
     

    Impossible to import C:\Documents and Settings\Compaq_Owner\My Documents\My Backup\Backup260910bkup.reg of register: not all data was successfully written to the registry.  Some keys are open by the system or my other processes.

    For this error, you must contact the Support Windows via Microsoft answers Forum link below:
    http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=4

    Thank you
    Mechell P.

    Hi NeilRClark,

    When a registry key is blocked from change, the user can also run a. Registry Registry REG entries to merge the registry keys, values or the value in the system registry data, with the following permission denied error message:

    Cannot import RegistrationEntries.reg. Not all data was successfully written to the registry. Some keys are open by the system or other processes.

    To solve this problem, the ownership and grant full control (read and write) permissions and rights on the protected system registry key.

    Check out this link to do the same thing:

    How to capture a file or a folder in Windows XP

    To take ownership of a file or folder

  • When I import pictures from my iPhone 4s in the Windows Photo Gallery, some come head down and cannot be rotated. Error code 0 x 80070057

    original title: Error Code 0 x 80070057

    When I import pictures from my iPhone 4s in the Windows Photo Gallery, some come head down and cannot be rotated.  Error code 0 x 80070057

    I use Windows Vista.  Help, please.

    Paint has definitely worked for me!  I tried to in WLPG (open with paint) then shot and recorded in the paint.  It is automatically changed in WLPG.  Thanks for the suggestion.

  • Black Vista screen falls down randomly and sometimes at startup

    My problem seems to be quite unique =

    I sometimes get a black screen crash when you play WoW, and sometimes Vista will not start and lead me to a black screen at startup.  These problems can be corrected by restarting the computer - there are however sometimes many restarts to get the system starts again.

    IV tried to update my video card, my monitor drivers drivers, cleaning of my drive C, did a LOT of research google about the problem as possible and I'm not sure what the cause is right, it could be a videocard related, or maybe not.

    I am running Windows Vista x 64 Home.
    Modern stuff Quad Core CPU, 8 GB of Ram.

    Hello

    Could be heat related - try using a small fan to blow into the air intakes to see if that helps.
    It is just like it loses power or stop it in the normal way?

    To be able to remove ALL and reinstall all memory cards and cables (both ends) - actually delete
    and replace - do not just tight. Remove the dust bunnies and clean the vents. Check that the
    fans of work (before and after opening the case). If a laptop on what you can do is reinstall
    memory and clean the ventilation openings (still may try to add a small fan as a test).

    This sounds like material so if the above does not help you then probably need help
    a real computer store (not the leeks and the glances at a Best Buy or other stores) or the
    Support of system Maker.

    ===========================================================

    What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
    on this machine, including those you have uninstalled (they leave leftovers behind which can cause
    strange problems).

    ----------------------------------------------------

    Follow these steps:

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    ==========================================

    After the foregoing:

    How to troubleshoot a problem by performing a clean boot in Windows Vista
    http://support.Microsoft.com/kb/929135
    How to troubleshoot performance issues in Windows Vista
    http://support.Microsoft.com/kb/950685

    Optimize the performance of Microsoft Windows Vista
    http://support.Microsoft.com/kb/959062
    To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
    Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
    reference (if you have a small box at the bottom left - show for all users, then check that).

    How to check and change Vista startup programs
    http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

    A quick check to see that load method 2 is - using MSCONFIG then put a list of
    those here.
    --------------------------------------------------------------------

    Tools that should help you:

    Process Explorer - free - find out which files, key of registry and other objects processes have opened.
    What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
    each process.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

    Autoruns - free - see what programs are configured to start automatically when you start your system
    and you log in. Autoruns also shows you the full list of registry and file locations where applications can
    Configure auto-start settings.
    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
    Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

    There are many excellent free tools from Sysinternals
    http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

    -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
    When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
    Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
    a program that runs in your Windows startup.
    http://www.NirSoft.NET/utils/what_run_in_startup.html

    There are many excellent free tools to NirSoft
    http://www.NirSoft.NET/utils/index.html

    Window Watcher - free - do you know what is running on your computer? Maybe not. The window
    Watcher says it all, reporting of any window created by running programs, if the window
    is visible or not.
    http://www.KarenWare.com/PowerTools/ptwinwatch.asp

    Many excellent free tools and an excellent newsletter at Karenware
    http://www.KarenWare.com/

    ===========================================

    Vista and Windows 7 updated drivers love then here's how update the most important.

    This is my generic how updates of appropriate driver:

    This utility, it is easy see which versions are loaded:

    -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
    For each driver in the list, additional useful information is displayed: load address of the driver,
    Description, version, product name, company that created the driver and more.
    http://www.NirSoft.NET/utils/DriverView.html

    For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
    Control Panel - device - Graphics Manager - note the brand and complete model
    your video card - double - tab of the driver - write version information. Now, click on update
    Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
    Uninstall - REBOOT it will refresh the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
    with their own software and drivers and all other main drivers that you have.

    Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
    Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
    BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
    each installation.

    Always check in the Device Manager - drivers tab to be sure the version you actually install
    presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
    in particular that) so to install a driver - reboot - check that it is installed and repeat as
    necessary.

    Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
    manually by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
    Updates, that leaves about Windows updates but it will not install the drivers that will be generally
    older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
    get new manually if you wish.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    ===========================================

    Refer to these discussions because many more excellent advice however don't forget to check your antivirus
    programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
    first.

    Problems with the overall speed of the system and performance
    http://support.Microsoft.com/GP/slow_windows_performance/en-us

    Performance and Maintenance Tips
    http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

    Explorer Windows stopped working
    http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

    Hope these helps.

  • PC Windows Vista stops unexpectedly. Sometimes several times a day and sometimes not at all.

    My Windows Vista PC completely stops unexpectedly and without warning. Sometimes several times a day and sometimes not at all. When I turn it back on, sometimes I have a blue screen that tells me that the PC has experienced an unexpected shutdown and communicate with my local technician. However when turning on, I am always able to return to my office. My anti-virus support told me that it is not related to a virus. Help!

    It is likely some equipment or device driver issue (although we can not entrierly a problem of software).  I need a lot more information on this blue screen - EXACTLY what it says Word for Word with all the codes.  Read the messages and follow the procedures established by the MVP of the spirit in the following thread on the Blue Screen of Death.  They should help you solve your problem. http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/8cd8362e-7d06-46FB-afd7-84d54b6a8ea7  I know it's long but a blue screen problems problem may take some time because there are so many different causes and we must find the right to try to identify the problem and then find a way to fix it.  One of the elements in his post is a method to prevent the system to reboot when a blue screen if you have the time to copy the information.  If the system is not turned off, but the screen does not stay up long, press prtscrn to copy the screen, then when the system boots to open Microsoft Paint, click on the Open box and click Ctrl + V to paste here you have plenty of time to copy the information and post it here so we can look at.  Do not forget to include EVERYTHING - it is unclear what could be of crucial importance.

    I repeat the procedures in the messages of the spirit in the link above - just follow them and answer back here with the results.  Want to make interim reports before the end of the stteps is perfectly OK - in fact, I suggest you do that so I can help guide you and maybe eliminate some of the steps because they will provide no information, that we don't already know (or will not solve the problem because of the information that we already know.

    A question, is your so hot PC anywhere on it that if you hold your hand on it, you will need to detach due to heat?  Overheating is a common cause of this type of problem.  Check that the fan doesn't work and all intake and exhaust ports are clean of dust, lint, or any other obstacle.  If this is a desktop computer, remove the cover and clean the entire interior to remove dust and lint and anything else that doesn't belong.  Make sure you do not loosen or detach the wiring or the accessories cards or RAM chips.  Don't bother if it's a laptop - it's too difficult to get inside to do a proper clean-up - just make sure that the fan is running and that the vents are clear.

    I hope this helps.  I look forward to your reply with your comments about what you did to the spirit and procedures for detailed information on the blue screen error.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Windows hangs and nothing works, when I go to the Twitter site

    I have a strange problem. I am running Firefox, Windows 7 64 bit. Windows by hanging anything works keyboard, mouse, Manager of the tasks. He does for about 3 minutes, then it goes again. The funny part is he does it only when I go to my Twitter page. Also windows Explorer closes a little work.  Happens that when I use Firefox, Chrome, IE all other browsers do not cause windows to hang all tried. Fire fox will stop responding, then start up again only on my Twitter page. Ago that I know that Firefox is the problem, but their support is saying that Firefox can not cause Windows hang on Twitter. Funny, it seems that these problems begin when I install Firefox. But everyone tells me it's a matter of Windows. Can anyone help?

    Hello

    If you have only these problems when using Firefox, the solution seems obvious.

    Stop using Firefox and and uninstall this browser.

    Start using another browser that works.

    Concerning

  • When you try to watch tv in Windows Media Center, I get black screen and audio sometimes and sometimes does not.

    Black screen in Windows Media Center during the TV

    When you try to watch tv in Windows Media Center, I get black screen and audio sometimes and sometimes does not. Any fix for it?

    TV works on the other program I have and has been workign on MC last week, but now I don't?

    Some success with this issue (its OK, but BLACK) video for live/recorded TV

    ' 1) ' disabled ' tuner card (Ati HD 650 PCIe) TV [via right click] in the Device Manager
    (2) restart Win7 64-bit
    (3) Win7 located & reinstalled the drivers
    (4) VOILA!   Real video and audio live & recorded TV

    BTW - before above fix in Device Manager:
    Notice anything in his video & Game Controllers
    'Properties' reported 'this device is functioning.
    "Update drivers" reported "... software driver...»
    ... and no updates of WMC anywhere in sight

    Go figure!

  • Make a right click on the folder responds slowly and sometimes get an error "windows does not.

    original title: pc maintenance

    Make a right click on the folder responds slowly and sometimes get an error "windows does not.

    Make a right click on the folder responds slowly and sometimes get an error "windows does not.

    This could be due to so many things. Malware, applications in resources, solutions anti-virus, hard drives damaged, damaged file system, processor ram capacity limitation...

    can't tell what your problem exactly, you can use the reliability monitor, event viewer to discover additional problems...

    What does it mean when a program is not responding? http://Windows.Microsoft.com/en-us/Windows-Vista/what-does-it-mean-when-a-program-is-not-responding

  • How can I activate Director 11?  D11 I loaded on my MAC from a disc.  In the activation window, the ups and downs of the choice of activation are cut.  The choice of the internet is enabled, but the window says"Activation"-no link. "  But I am conn

    How can I activate Director 11?  D11 I loaded on my MAC from a disc.  In the activation window, the ups and downs of the choice of activation are cut.  The choice of the internet is enabled, but the window says"Activation"-no link. "  But I'm connected to the internet.  The phone option is not available.  When I call Adobe directly, phone mail says that the Director is not supported.  Suggestions?

    Moving to the Director

  • I've recently upgraded to CS6. For some reason any floating document windows that I move in the workspace, pull out the interface, especially to the left and sometimes to the bottom of the screen. I gave tried Essentials rearmament and Interface to d

    I've recently upgraded to CS6. For some reason any floating document windows that I move in the workspace, pull out the interface, especially to the left and sometimes to the bottom of the screen. I gave tried Essentials rearmament and default setting Interface. A message letting me know that by default has been reset but I still have the problem. It's SO frustrating as a large part of the time I can't go to the window, I want to work on. Help, please!

    Hi John

    Try resetting preferences

    Press and hold the CTRL, ALT, shift (Windows) / command Shift (MAC) Option in starting up of Photoshop.

    Select Yes

    Note:-make sure you backup Presets/stock/Modified Workspaces/Plugins (if any)

    Thank you

    Assani

  • video resolution down during or after the logon Windows 7 Pro and Ultimate

    After cranking up the logon screen change video resolution of 1920 X 1080 to 1280 X 720 and I have to reset resolution then everything is OK until the next time start us

    2 of my units make this one with 7 ultimate pro and 1.  With the help of Acer X233H
    I removed the stitch as suggested by some, but nothing helps!  Help, please

    Hello
     
     
     
    Remember to make changes to the computer before this problem?
     
     
     
    Follow these steps:
     
    Method 1: First of all, you can try to update the latest driver for your graphics card video card and check.

    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
     
     
     
     
     
    Method 2: As you are facing this problem on Windows 7 Pro and Ultimate, it might be possible that a program that is installed on both the computer cause this problem.
     
    To help solve the problems, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts
     
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
     http://support.Microsoft.com/kb/929135

    If the display works fine by disabling all third-party services, you follow the steps in the article to elimate the service that is causing the problem.
    Note: after a repair, put the computer into normal mode.  Follow the instructions in this article.

Maybe you are looking for