Windows hangs on start up

Similar Questions

• Windows hangs when starting

  Hello..
  am on vista Home premium on a Toshiba satellite computer laptop.my laptop crashes or freezes while loading windows during startup, the loading sign window will pass and stops. It does not move again. Please I would like to know how to solve this problem.
  Help me please
  Thank you.

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• HP 6530 b hangs when starting

  Hi all!

  I have a HP 6530 b hanging while I'm trying to start. Basically what happens is it starts to boot and then it stops. I got Windows 7 Pro 64 bit installed with a Linux 12.04. I was doing my job on the computer a few days when it shut itself down, without warning. The screen will not suddenly goes black, but it was as if I had told her to stop, that I did not. As he was closing down, there the screen on the fact that she had installed updates. Anyway, it restarted itself and it could not boot into Windows. It got to the point where the Windows Logo appears, but it froze right there.  I waited for about 20 minutes to see if she would do anything, which he did not. Tried to restart that and it froze before he even got the Windows Logo. Now, it happens on the screen that indicates that Windows could not start and needs to be started in recovery mode. I tried and it failed too. I could remove the hard drive and connect it to another PC and starts very well under Linux, he said that the installation of Windows has been damaged. From what I can deduce, I think I can give up this install of Win7, but I can't understand what is causing the PC to hang during startup. any suggestions are appreciated.

  Thanks for the advice, but I already understood that the motherboard is bad. Thanks anyway!

  -DogLover

• Windows Vista: windows could not start error. is suspended from the "Microsoft Corporation" loading bar then black screen BIOS not acpi compliant

  After you have installed the driver for the zune hd, I was asked to restart my computer. After the reboot, start froze on a white screen. I've seen this before and it is usually because of some connected usb components. so I manually powered down the Tower, disconnected the cable from zune and restarted. This time a screen saying that windows could not start, "launch Startup Repair tool" was recommended. Select this habit makes the startup hang to the progress bar from Microsoft corporation, then to a completely white screen. Although strangely, once only a blue error screen appears which says that the BIOS is not acpi compatible. I can't restart with F8 to go into safe mode, "windows error recovery" still appears. "Start windows normally"produces the same results as the tool to restart launch system. " I have a drive to upgrade to windows 7 and a windows XP upgrade disk. the disc of windows 7 hangs at "starting windows" and the XP disc gives a blue screen error: stop: 0x0000007B (0xF78D2524, 0c 0000034, 0 x 00000000, 0 x 00000000)

  I think I have a BIOS problem, but I don't know how I could continue dealing with the repair. I have no success update the bios from usb flash. Any idea is appreciated.
  Update: managed to start with F8, choose to boot in safe mode and loading hangs after "load: \windows\system32\drivers\crcdisk.sys"***.
  the machine is a gateway LX6810-01 (friend motherboard)

  Hello

  1. What is the exact error message when Windows Vista does not start?

  2. you have the disk Installation of Windows Vista operating system?

  I suggest you change the mode of RAMA to IDE in the BIOS. You can contact the PC manufacturer for assistance.

  Note: BIOS change / oxide of additional metal (CMOS) semiconductor parameters incorrectly can causeserious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

   

  In addition, perform a check disk in Windows Recovery Mode.

  (a) Insert the Windows Vista installation disc in the disc drive, and then start the computer.

  (b) press a key when the message "Press any key to boot from CD or DVD".

  (c) select a language, an hour and the currencyand a keyboard or an input method, and then click Next.

  (d) click on check drive for errors.

  (e) in the System Recovery Options dialog box, select the drive of your Windows installation and click Next

  (f) to the System Recovery Options dialog box, click on check Drive for errors.

  (g) use the switch/r to run the disk check.

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

   

  It will be useful.

• Windows hangs on access to this file

  I have a file on my PC which causes a deadlock if I do something with it. It may not be relevant, but the file in question is \movie.dll. My mcafee crashes when it scans the file. I can not rename, delete, or replace without causing Windows hang. CTRL-ALT-DEL does not work and the only thing we can do is power off.

  Hello

  Use the Safe Mode if possible - repeatedly, press F8 that you start.

  If necessary, use these utilities

  UnLocker 1.90 + (free)
  http://unlocker.emptyloop.com/

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN

  Below also work on Vista 64 bit

  Another good alternative - use FileAssassin:

  FileAssassin - free
  http://www.Malwarebytes.org/fileassassin.php

  Force delete (cannot delete) closed or in used files or folders with FileASSASSIN
  http://www.mydigitallife.info/2008/12/27/force-delete-cannot-delete-locked-or-in-used-files-or-folders-with-FileASSASSIN/

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN

  And this - MoveOnBoot

  MoveOnBoot
  http://www.softwarepatch.com/software/MoveOnBoot.html

  I hope this helps.

• Windows hangs and nothing works, when I go to the Twitter site

  I have a strange problem. I am running Firefox, Windows 7 64 bit. Windows by hanging anything works keyboard, mouse, Manager of the tasks. He does for about 3 minutes, then it goes again. The funny part is he does it only when I go to my Twitter page. Also windows Explorer closes a little work.  Happens that when I use Firefox, Chrome, IE all other browsers do not cause windows to hang all tried. Fire fox will stop responding, then start up again only on my Twitter page. Ago that I know that Firefox is the problem, but their support is saying that Firefox can not cause Windows hang on Twitter. Funny, it seems that these problems begin when I install Firefox. But everyone tells me it's a matter of Windows. Can anyone help?

  Hello

  If you have only these problems when using Firefox, the solution seems obvious.

  Stop using Firefox and and uninstall this browser.

  Start using another browser that works.

  Concerning

• Windows hangs or freezes randomly

  Original title: System problem

  I am using windows 7 ultimate and my computer freezes randomly over and over again after a few seconds, it starts normally

  Hi Praveen,

  1. is the issue limited while accessing any program in particular?

  2 have you made changes on the computer before this problem?

  This problem may occur following a conflict of third party software, virus system or file system is corrupt.

  Refer to the steps in the following Microsoft article and check if that helps.

  Windows hangs or freezes: http://support.microsoft.com/kb/2681286

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again, the data files that are infected can be cleaned by removing the file completely, which means that there is a risk of data loss.

  Hope that the information provided is useful.

• Windows does not start - XPS 8300

  I have a XPS8300 (2010) who does not successfully start windows.  System Restore does not resolve the problem.  Especially when I try to start it, the HARD drive runs very fast, Windows does not start, the screen turns off, but the machine does not stop automatically.  A few times I was able to press F8 and load it to the ' last known good state ", but this does not work normally.  When it works (like now) the function of machine reasonably well and I can access the files.  So I think that the HARD drive may be OK.

  I ran the ePST - he tried repeatedly - and he never performs the test.  No error code.  The screen turns off and then sometimes it just hangs. But earlier it gave me a code of "beep".  It's "1 - 2 - 3.

  Tried to run the Dell diagnostic online, but it's pretty slow, I can't tell if it has "hooked", or if it is still ongoing.

  Would appreciate recommendation on next steps.

  A flaky power supply can cause these problems, and they are quite common.

• Bootcamp partition Windows will not start since WinUpdate

  I'm working on a MacMini (mid 2011) on which a bootcamp partition has been installed. I had to work on windows update etc...

  So I did update from our wsus server, and then restart Windows, windows no longer starts. There was a line of white underscore flashing on a black screen.

  I tried to see if the Mac partition (10.7) was able to start. It has been altered too, but I was able to reinstall it.

  __

  on windows, I followed these instructions: https://discussions.apple.com/thread/4936761?tstart=0

  To do this, I created a USB bootable key WIN10 (regardless of the Version of the OS in this case), I started on it to access the repair menu. Here, I opened the CMD and had results of the thesis:

  
  x:\sources>cd c:\ 
  
  x:\sources>Bootrec.exe /Fixmbr 
  
  Operation succeed 
  
  x:\sources>Bootrec.exe /FixBoot 
  
  Operation succeed 
  
  x:\sources>Bootrec.exe /RebuildBcd 
  
  Number of windows installation identified : 1 Add the installation to boot list ? : O 
  
  Asked System Device not found. 
  

  I assumed it was due to drivers for windows compatibility. (something like record of $ $WinPEDriver), but no idea how to put them on my bootcamp partition, previously never worked with bootcamp.

  I should also mention, I tried a classic Windows repair, he told me that my windows partition has been locked. I assumed it was a problem of version of bootcamp. I've updated everything on my mac partition, but he found no update for bootcamp. Right now I'm preparing a bootable usb key with both 'iso' and 'windows compatibility modules' activated with bootcamp assistant.

  I don't know when it happens, but now, when I try to boot on my bootcamp partition, there are only blackscreen (not slider more). But also, my screen flashes as if he finally gets the signal just before the black screen.

  I need your help for:

  -Fixed problem starting Windows partition, OR...

  -Give me a way to get the activation key for the license of the installed windows (without starting it (if it exists)), so I can reinstall it correctly.

  Thanks for the kind help and forgive my bad English.

  Please after the release of the following OSX Terminal commands.

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  sudo dd if = / dev/rdisk0s4 account = 1 2 >/dev/null | hexdump - C

  What version of Windows?

  DiskPart should be used to clear the readonly attributes.

  Bootrec.exe must be used that on C:, otherwise it is written to X:. CD C:\ should be replaced with C: only if you are on the C: drive.

  If you run Diskpart, please after the release of

  list disk

  partition from the list

  the list volume

• Does not begin with satellite U840-110 - Windows 7 - loop start-up

  Hello

  I have been using a Satellite U840 - 110 portable since dec 2012 on a Windows 7 Home Premium operating system. Recently, the laptop was left in standby for a few days. When I tried to start the computer, it froze at the start. So I forced reboot by pressing the power button. After repeating this for a couple of times, he first showed a blue screen. Then, when the computer has been restarted, he showed a black screen with the following message

  "Windows error recovery".
  Windows could not start. A recent hardware or software change might be the cause.
  ...
  ...
  Run the Startup Repair tool or
  Start windows normally'

  I have tried both these options multiple times and every time at the end of the process, he might come back to these same screen. I also tried to press F8 and used advanced and tried Boot Options "not last know good configuration."

  None of this seems to work and I was not able to load Windows. I don't have a backup of my data and can end up losing a lot of vital information.

  Is there anyway I can solve the problem and get the computer to work again?

  Is it possible to recover data from the hard drive.

  Thanks in advance for the help!

  Is it possible to recover data from the hard drive.

  You can remove the laptop HARD drive and could connect to another computer using USB-to-SATA cart.

  After that, you could insert the HARD disk into the laptop new and could try to perform the Toshiba HDD recovery.
  (F8 - fix my computer - Toshiba-HDD recovery)

• Windows does not start on my Satellite P300

  Hi all

  I have a problem with my Toshiba Satellite P300-22R.
  When I start the PC, the normal start screen comes (Toshiba Leading Innovation) I can also launch the BIOS and all the stuff. But now nothing works again! I'm still in this screen, Windows will not start and when I press F2 I don't come to the BIOS. Can you help me?

  Thank you and best regards

  Angelo

  Start your laptop and press F8 to display the advanced startup options. To start Windows in safe mode, try to please.
  Send comments.

• Windows could not start HomeGroup Listener

  Windows could not start HomeGroup Listener on. Local computer. For more... the 2147023817 service-specific error code. I also have a problem with the provider of the home group. . I tried almost every thing. .. .i can join the Group of home. Thank you

  Don t think it has something to do with the Toshiba laptop.
  It looks like more because of Microsoft.
  Found this discussion in the Microsoft forum:
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/thread/453c3e1d-A980-417C-a6e6-d4c5c1af79a1

  _Someone wrote there: _

  + For those of you who could not startHomeGroup service listener and HomeGroup provider to ensure that these services are started and set to automatic: +.

  +-Function Discovery Provider Host +.
  +-Function Discovery Resource Publication.

  + (Activate in the following order): +.
  +-Peer Networking Identity Manager +.
  +-Peer name resolution protocol.
  +-Peer Networking Grouping +.

  + If these services are disabled this is maybe the reason why you couldn't create a homegroup. +

• Equium A300D - 16 c - Windows could not start

  I have a Toshiba Equium A300D - 16 c, and all of a sudden it turns on and goes on the windows boot and said Manager that Windows could not start and he won t let do me something else.
  I put really know what to do and all my United work is about it.

  It says to put the installation disc windows but it s does don't not to all drives what so ever.

  If anyone could help I'd be grateful
  Thank you

  You can start Windows in safe mode?

• Windows does not start at startup

  Hello

  Windows does not start at startup, how? "Safe mode or the other).

  Hello

  Are you able to put the laptop press F8 and choose fix my computer?
  If this is not the case, take your recovery disk and try to reinstall the Windows operating system using the recovery disk!

• Windows could not start. Winload.exe corrupted

  Been having some problems with my Equius has therefore decide to start, F8 and do a system restore toshiba.

  Started and started to format the drive. All of a sudden he projected blue.

  The problem is now I can not even start until now to get the recovery/restore option. I get: -.

  Windows could not start. A recent hardware or software change might be the
  cause...

  File: \Windows\system32\winload.exe
  Status: 0xc000000f
  Info: The selected entry could not be loaded because the application is
  missing or damaged.

  Not sure how it all works, but I guess that recovery stuff are stored on a separate partition. Problem is I guess you must be able to start to load windows before you even get to do this?

  I downloaded and tried a boot with no joy, and of course vista recovery disk, toshiba provide a vista disk. How the hell can I recover from this situation?

  Hello!

  If you are not able to get in the boot menu for HARD drive recovery, you must use a Microsoft Vista disc to reinstall the OS.
  Or you use the Toshiba recovery disc but I think you forgot to burn the disk because normally you get a message (recovery point) you want to burn the disc.

  However, you can order a Toshiba Toshiba recovery disc directly:
  https://backupmedia.Toshiba.EU/landing.aspx

  Good bye