Windows help screen

Similar Questions

• Can not stop the Windows Help and Support screen to appear several times

  I tried to us Windows Defender and features WindowTurn on or off programs in vain to stop the Windows Help and Support screen to appear several times offering assistance on everything that I've just selected if it is a selection of function or the word internet. The copy of Vista came with my new Dell laptop. I have another laptop HP with Vista but do not have to go through this on this subject.

  Advice to address this very frustrating situation would be appreciated.

  Hi Maree33,

  Let's run Windows Update and make sure that you have all the latest patches and service packs loaded.  In Internet Explorer click Tools then Windows Update and follow the instructions.

  You can also give a quick call Dell and see if this is a common problem with their OEM version.

  Please let us know the results.

  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 stuck on the Windows startup screen. Help!

  I was playing a game (Counter Strike: Global Offensive - on Steam) on my PC I got the blue screen error was 0x000000A3, after that I booted my PC then it got stuck on the Windows splash screen. Now, when I start my PC it gives me only 2 options, "start Windows normally" which leads to frozen Windows startup screen and it gives me this: '(recommended) launch Startup Repair' that I have used and tried all the options, except the command prompt like I do not know how to use it.

  My PC is a Windows 7, Asus

  Hello

  Often, this will work when the built-in repair software will not.

  Make your own information system repair disc in this tutorial:

  "How to create a Windows 7 system repair disc"

  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  "This will show you how to create a system repair disc Windows 7 to be able to use to start the system recovery options to help recover your Windows 7 installation, if you have not a Windows installation disk, can't find your Windows installation disc or can not access the recovery options provided by your computer manufacturer.

  A system repair disc is not able to install Windows 7.

  Note

  If you are unable to start your Windows 7 to create a Windows 7 system repair disc, and then you could create on another computer for use on your computer. »

  _____________________________________

  Then, use this disk for System Recovery Options:

  "System recovery options".

  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  "How to run a startup repair in Windows 7"

  http://www.SevenForums.com/tutorials/681-startup-repair.html

  See you soon.

• Is it possible to get an impression of the Firefox Help screens? How can I do?

  I'm not a geek and I am struggling to get my head around the use of Firefox with Windows 7. It might be easier if I could print the help screens to create a manual that I could follow in step by step mode.
  How would I do that?
  Thank you in advance.
  John Crawford.

  Select the text that you wan't to print.
  Then ctrl + c and open word or notpad, meadows
  and press ctrl + v, and then print it out.

• Satellite M60-164 - BSOD during the windows loading screen

  On startup, I get the blue screen of death during the windows loading screen.

  I don't have a recovery cd, only a cd of OS (windows xp SP1a), which shows the option to repair but prompts then insert the recovery cd, how and where can I get one of these!

  No matter what help get a restore for Toshiba Satellite M60-164 Pro cd would be much appreciated!

  I think I know why you get a BSOD.
  You said that you have installed the Win XP SP1a.

  You must Win XP SP2!

  If you wish, you can create a CD Win XP SP2 clean! How? It's very easy. You need the tool freeware nLite (google for it and how to use it).

  Using the nLite application you could create a new XP CD and could include SP2 in this CD. You can then use this disk to start!

  By the way; The Toshiba recovery disc can be ordered from the ASP

• Satellite A100-049 stops loading at the Windows loading screen

  Unless I opened fully open/almost completely the cover on my Toshiba Satellite A100-049 it will always freeze on screen Toshiba Logo black (first one you see). She has completed half of the blue progress bar that runs along the bottom of the screen. I need and then turn off the button and once again, it becomes work.

  The laptop is only 2 weeks old nine. It's especially annoying since it prevents a scheduled backup to wake the portable computer from Hibernation. I have to leave it on or leave the lid open permanently.

  Help?

  It seems that the title has been changed from the one I posted, nothing wrong with that, but it is no longer accurate. It keeps loading the Windows loading screen, it freezes "before" that date. The Toshiba Logo POST screen, very first, you see when you turn on the laptop.

• Satellite Pro L450D - 12 X is not booting from the windows startup screen

  Hello, my laptop Satellite Pro L450D-12 X has been set up on and after awhile, window repair system popped up.
  After a long time he closed and restarted, but it does not start at the windows logo screen. It just stops after the splash screen and the screen goes black.

  Please can someone help?

  Hello

  Looks like the system is corrupted
  Try HARD drive recovery

  Turn on the device, press F8 and choose fix my computer.
  Now choose the recovery of HARD drive in the list of available options.
  This should set the camera back to the factory settings

  But this procedure works only if the HARD drive is OK.
  If the HARD disk is not OK, it will not work

• Tecra M2 LCD brightness to Windows login screen

  Hello

  the brightness of the LCD screen of my Tecra M2 is too dark at the Windows login screen (only here). I'd say it's around one or two steps above the minimum brightness, which is really too dark.

  After login, the brightness can be adjusted with the Fn key combinations or the Toshiba software. I know it wasn't dark before, but somehow I have seem to have changed without knowing.

  I tried to change the parameter logged on as administrator, but nothing helped. After the reboot, the screen is dark again. The Fn keys do not work on the login screen.

  So, does anyone know how the setting until a user's?

  Thank you
  Ingmar

  Hello Ingmar

  I don't really know why is it so important to you, but something like that is nothing unusual. At the beginning the BIOS is responsible for all the activities and no OS. I imagine that in the BIOS settings that the brightness of the LCD screen is not set to the maximum level (not necessary). When the BONE starts OS take control over the material and that you have more high level of brightness (if you defined in the intelligence tool).
  All that s!

• I have recently in the last 24 hours, updated my OS to 10.11.3. The problem I have is that it no longer recognizes my second monitor. When I go into my poster in system preferences there is no detection monitor botton to press as shown in the help screen.

  I have recently in the last 24 hours, improved and install OS 10.11.3 it no longer recognizes my second monitor. When I go into display in system preferences, there is no monitor to detect Botton appears in the window in the described help screen. Does anyone had this problem after the update? Is there a solution?

  Video Troubleshooting internal and external monitors

• Windows media center m7350n: my computer refuses to get past start of windows blue screen

  Office refuses to make it past the windows blue screen with the words "starting windows" my Windows media center what do I do in order to get to start up again.  I did a few system recover test with these results. "

  Failed, test: test Shortself, Hd521-2w error code.  He also said that he would not recommend a system recovery.  This problem started one evening when my windows media center Office said that it had set a file.  How can I fix my desk as it is passed, the windows startup screen

  Skulldragon7

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post on your PC not start and I wanted to help.

  I wish I got good news for you, but I did not, as it sounds a bit like the hard drive has failed, what is to be expected if this PC XP - era still has the original drive.

  We have a few troubleshooting steps to test the drive but they only work on recent PC.

  What could work is by pressing ESC, or F1 or F2, when you start to see if one of these enter you a Setup screen, and if they do, choose to run the diagnostics from there to go to disk.

  If the drive has failed, there is bad news (sorry!) -in that HP long leaves Jersey recovery media for XP - era machines, so there is nothing you can order from HP to restore your PC to a new drive.

  Given that HP no longer provides a recovery media for your model, a few other sites, you should check are: http://www.computersurgeons.com/ and http://www.restoredisks.com/

  And if not enough bad news, I guess that the hard drive in your XP machine has something known as an IDE interface.  You can tell by looking at the back of the car where the data cable connects.  If it is a large flat cable (about 2 inches wide) and there are a bunch of small pins where it connects on the disc, then it IS an IDE drive and those who are practically impossible to find, as the industry player opted for SATA disks making a few years back.

  Sorry... but it's time to think seriously to switch to a newer PC.

  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Satellite L350D PSLE8E stuck on windows startup screen 7

  Help! Unable to get the computer to spend the start of Windows 7 screen. Just upgraded from Vista to 64-bit Windows 7... bad idea, any help please?

  You can start Windows 7 in SafeMode (F8 at startup)?

• Pavilion dv7 hangs on windows start screen

  Hi all

  This problem started a few days after I bought this computer in June, and I have tried everything I can think of including the factory restore and nothing has helped. I really don't want to return it because I really like it, but I can't stand this problem starting. I bought this one after I returned a dv6 for a power supply problem, it would not turn on at all after I had it for only a few weeks.

  When the laptop is turned on it starts and then freezes on windows start screen. It takes a few other tests of the switch, tool repair, before I can get it to come. The repair tool is useless for this problem. In this process, I also end up with BSOD and stop errors. The error that appears now is 0 X 00009086. I will use no more restore because it isn't helped either.

  A computer brand new, not even a month and he has this major problem. I've read other articles published on the dv7 and have not found anything else to try.

  Windows 7 home.

  I would appreciate any ideas to try before I end up taking it back too.  Don't bode well for buying another HP again that's for sure.

  Hello

  I had already tried the first two options and they did not help.

  When I tried the 3rd option gave you the process stopped at C:\WINDOWS\system32\drivers\classpnp.sys.  I looked into this and found it to be a problem in Vista too. I have read through the postings for this but haven't tried anything yet.

  BSOD Stop error message... 9086 is associated with this start hang up.

  I move from the Intel site and ran their audit tool then update the HM65 Chipset. This had no effect on the victory starts page suspended.

  I ran sfc and he found no violation of integrity.

  I was leaving my laptop because it is easier then trying to make it work again properly now 4-5 tries to make it work. It aggravates really me that I have this problem with a new computer.

  I try next?

  Thank you for your help on this.

  Louise

  20/03/16 UPDATE ON THIS PROBLEM.

  I installed Windows 7 Pro and have not had a problem with start up since.

• HP Simplepass is no longer works to 8.1 windows login screen

  Hello

  Few days back I pruched this Mallet and portable great called HP envy 15 model J122TX. Evrything works perfectly until I had recived this horrible update from MIcrosoft. My laptop has pre installed windows 8.1 and a few days later, I got a lot of updates of microsoft recived. After installation of updates HP Simple pass is no longer present on the windows logon screen.

  This version of windows has something called sing fingerprints optional. I got configered successfully, she and I had also set up the HP simple pass. but unfortunately I cound not connect to windows using the fingerprint reader. scanner Finder blinks white light at the opening of the session, but when I swap my finger on it nothing happens. (but before the update it worked)

  any help please

  Try reinstalling pass Simple. Its been observed that if you use Microsoft ID to connect to WIndows then print fails. Microsoft is working on fixing it.

• Windows blue screen of death (ASF) when I play Garrysmod

  Windows blue screen of death (ASF) when I play Garrysmod

  Hey,.

  When I started to play Garrysmod (GMod) as blue screen arrives (happened 2 twice now)...

  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.1.7600.2.0.0.256.1
  Locale ID: 2057

  More information about the problem:
  BCCode: 101
  BCP1: 0000000000000061
  BCP2: 0000000000000000
  BCP3: FFFFF880009E7180
  BCP4: 0000000000000001
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 256_1

  Operating system: Windows 7

  Graphics card: Nvidia Geforce 9800 Gt

  If you want something else, ask here.

  Help, please!

  Thank you

  Christopher Kelly

  CEO Christopher Kelly - ChrisJets432 - ChrisJets Corporation - Check http://cjcw.sm4.biz/ for updates, etc.

  Right, I found the problem, the card (s) has an addon called HDR source and what is the cause of the crash.
  For example on gm_construct that I never go on the plan, due to the fact it triggers it

• Restart computer, windows xp screen came then the screen turned white

  Restart computer, windows xp screen came then the screen turned white

  Hello

  1. have you made changes on the computer recently?
  2. do you get an error at startup of the computer?

  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.
  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  b. you need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  I hope this helps.