Windows Installer cound service is not accessible.

Similar Questions

• try to install iTunes on my windows 7, but get windows installer services are not accessible... pls help

  try to install iTunes on my windows 7, but get windows installer services are not accessible... pls help

  Transfer your question here: http://social.answers.microsoft.com/Forums/en-US/w7programs/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows 7, update services does not work

  I have a problem to update software in windows 7.

  I have a HP G72 laptop.

  I replaced my hard drive. 350GB, Western Digital 750Go digital West.

  -J' made an image of the C partitie (if it is 3 months, installed for the recovery partition, new updated worked after that).

  The new disk hard there however any possible updates of windows. (the bar is red on the left).

  -After that, I reinstalled the original image when the laptop was new (DVD image). Same result on updates.

  -Remove the folders from the dir c/windows/SoftwareDistibution, no results.

  -Checked the status of services: windows update is statred and in automatic mode.

  N ' tried microsoft 'Fix - it' no results.

  -updated the drivers intel, no results.

  -Downloaded System Update Readiness of windows to resolve the error (Windows6 1 - KB982018 - v3 - x 64). When installing, I get the error 0xc8000247. So I'm not able to install this software.

  Looked after errors in the CBS.log newspaper: found M²: cannot read the time value RptTime from the registry. [HRESULT = 0 X 80070490 ERROR_NOT_FOUND]

  Do a clean boot, without result.

  Does anyone know a solution to this problem.

  Thank you.

  Ed.

  Windows 7, update services does not, RESOLVED.

  The problem occurs when you change your hard drive for a bigger, in my hard drive of the case a GB Western Digital 340 WD 750 GB drive hard.

  For the Windows automatic updates again you need update the Intel Rapid Storage Technology Driverdriver. It will not be updated when you have intel check your drivers! For me, only the 9.5.6.1001 version worked. This driver can be found at http://support.hp.com/us-en/document/c02219204 .

  Versions available at https://downloadcenter.intel.com/SearchResult.aspx?lang=eng & ProductFamily = Software + Products & ProductLine = Chipset + Software & ProductProduct = Intel % c2% ae + Rapid + Storage + Technology + (Intel % c2% ae + RST) did not work for me (I tried the form version 12.8.0.106 08/08/2013.) Why does not the superior version is not clear to me.

  Good luck to solve you yours it took me two weeks to find it.

  Ed.

• Windows Security Center service does not turn

  Windows Security Center service does not turn

  In the status bar on the lower right, a flag with a red cross appears. When I clicked it, a window has popped up - Action Center

  He gave me an important alert to turn on Windows Security Center Service - when I pressed the button to do so, the following message appears:

  Could not start the Windows Security Center service.

  I tried to get help from the previously posted example from 'services' solution, but when I did it I got the following error:

  One or more ActiveX controls could not be displayed because that is:

  (1) your current security settings prohibit running ActiveX controls on this page, or

  (2) you have blocked an editor of one of the controls.

  For example, the page may not display correctly.

  Help, please.

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  You can try the steps suggested by Suresh in the link given below and check if this helps solve the problem.

  http://social.answers.Microsoft.com/forums/en-us/w7security/thread/d8250e7a-ee3c-4302-8CA6-9e2a10262feb

  Also refer to:

  http://social.technet.Microsoft.com/forums/en/w7itprosecurity/thread/90c3202c-448B-42b7-ACF7-dab8dba7b000

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Diagnostics policy service does not

  Windows Diagnostics policy service does not

  Original title: Network wireless adapter NIC Ethernet network device

  Hello

  • What were the changes made before the problem occurred?
  • When you receive this error message?

  I suggest you try the given steps and check if it helps

  Method 1: Try the steps from the link below

  http://Windows.Microsoft.com/en-us/Windows/help/network-connection-problems-in-Windows?T1=Tab03

  Method 2: Try to restore the Transmission Control Protocol / Internet Protocol (TCP/IP).

  The reset command is available in the IP of the utility of Word context. Follow these steps to use the reset command to reset TCP/IP manually:

  1. to open a command prompt, click Start, click Run. Copy and paste (or type) that follows the command in the Open box, and then press ENTER: cmd

  2. at the command prompt, copy and paste (or type) the following command and then press ENTER:
  netsh int ip reset c:\resetlog.txt

  Note: If you do not specify a path of the directory for the log file, use the following command:

  netsh int ip reset resetlog.txt

  3. restart the computer.

  Change TCP/IP settings

  http://Windows.Microsoft.com/en-us/Windows7/change-TCP-IP-settings

  Method 3: If this does not work, uninstall and reinstall the network adapter

  To uninstall the drivers follow the steps below

  1. click on start, type device manager in the start search box and press ENTER. Click on continue. The Device Manager dialog box appears. If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  2. in the list of device types, expand network adapters, and then look for the specific device.
  3. right click on the device and then click Properties.
  4. click on the driver tab.
  5. click on uninstall.
  6. click on OK.

  Restart the computer, the default drivers would be installed.

• "The profile could not be signed on-line. There may be a network problem or the Windows Live ID service may not be available. »

  "The profile could not be signed on-line. There may be a network problem or the Windows Live ID service may not be available. »

  Please help Thierry

  You can send me a mail on * address email is removed from the privacy * when you got an answer for me.

  Hi ziphovicHlubi,

  When exactly do you get this error message?

  Try the steps from the following link:

  Games for Windows LIVE: you can not connect to LIVE and you receive an error message
  http://support.Microsoft.com/kb/938705
  http://www.Microsoft.com/games/en-us/support/pages/technicalissuesguide.aspx

  If the steps above fail, then I suggest you to post:
  http://windowslivehelp.com/

• Error 1079 / base OS Windows 8 / Bluetooth service does not start

  Error 1079 / base OS Windows 8 / Bluetooth service does not start - I tried service.msc-> selecting Bluetooth support Service-> properties-> log on-> This account-(Administrator) / (NT AUTHORITY\LocalService) / / but nothing works, I had searched a lot on this problem but there is no solution to the problem of basic windows 8 (built in) only for win 7 and windows server... .but not for the basic version of windows 8 that I have...

  Now when I click to start the Bluetooth support service it always says error 1079...

  Hello

  Please, try the steps here to solve this problem:

  http://www.kapilarya.com/services-failed-to-start-in-Windows-8-1

  Hotfix applies to Windows 8 too and you must only put NT AUTHORITY\LocalService on the properties of the service.

  Hope this helps, good luck :)

• Windows Server Update service does not work after the installation of KB2720211

  I have a Server 2008 SP1 32-bit Standard, which had the role of Server Update for the Windows software installed connected to a WSUS upstream server and everything worked, with 17 clients connected to him and get everything their approved patches.  It was a new server starting with WSUS added at this time 1 months ago.  He had to be upgraded to SP2 S2008 which I did and WSUS have continued to function.  After being on SP2, there was another 152 patches to be applied and after that WSUS does not work anymore.  It appears 1 patch that has been applied has been KB2720211 that seems to cause problems for a number of people.

  The problem is that the update service does not start.  An error message comes back that the service has not responded in a timely fashion and I can't find the log files anywhere on what it is.  Here is what has been done so far all that in the same issue:

  1 deleted WSUS and restarted and installed it again.

  2 Remove WSUS and Windows Internal Database, restarted and installed it again (using the download of KB972466).

  2.1 install SQL Management Studio and logged to an internal database SUSDB and checked it is not set to single user (I believe it is set for multiuser name but I'm going from memory)

  3. install the KB2720211.

  4. installation KB2734608

  5 remove WSUS and Windows Internal Database, restarted and installed it again (using the download of KB972466).

  I am looking for any information on how to solve what is the question, because there is nothing in the log files I can find and no event in the windows event viewer.  I am ready to start with the server however if there is something I can look at to possibly solve the problem, please let me know.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Windows Installer doesn't work not, error "Installer could not access" in Vista

  GET THE ERROR WITH RESPECT TO WINDOWS VISTA "INSTALLER IS NOT BE ACCESSIBLE.  I DON'T TRUST ANY OTHER WEB FIXED EXCEPT DIRECTLY FROM MICROSOFT?  YOU HAVE A LINK FOR THE DRIVER OF FIXING? MICROSOFT SHOULD HAVE IT ON AUTOMATIC UPDATES NOW!  THERE IS AN EPIDEMIC OF WHAT I SEE.

  MY WINDOWS INSTALLER DOES NOT WORK "INSTALLER IS NOT BE ACCESSIBLE. I DON'T TRUST ANY OTHER WEB FIXED EXCEPT DIRECTLY FROM MICROSOFT? YOU HAVE A LINK FOR THE DRIVER OF FIXING?

  Oztroll,

  Also, please see the post below with a similar problem and fix possible:

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/b7d55d78-FBED-436a-AFF4-81b46ca3b06a

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows 7 firewall service does not start automatically and cannot be started manually

  Update Vista Home Premium SP1, removed the Comodo, removed AVG Free 8.5, put upgraded to Windows 7 Home.

  Attempted to set security. Firewall is "red". Could not be defined. Snap-in did not work (0x6D8).
  Have rubbed the registry for References all Symantec and Comodo and the computer restarted.

  Firewall service is set to start "automatic."
  Log tab is set to "This account" with a password - I have no idea from this password (and don't know what it is).  Seems that log on should be "Local System account" with Desktop interaction

  Falied given departure following the event log:
  Log name: System
  Source: Service Control Manager
  Date: 2009-11-06 12:19:25
  Event ID: 7024
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: VISTALAP
  Description:
  The Windows Firewall service is stopped with the special service error access is denied...
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      7024
      0
      2
      0
      0
      0 x 8080000000000000
     
      99759
     
     
      System
      VISTALAP
     
   
   
      Windows Firewall
      %%d Ko
   
  

  Repository is consistent.

  Suggestions?

  Hi dynameme,

  What is a home or work computer? Is there any server/domain mean?

  Try a startup repair, it sounds as if you have an error with the help user account to run the service.  Startup Repair may be able to fix this.  If this isn't the case, then you should try to repair the Installation.

  STARTUP REPAIR

  If you have a Windows 7 installation disc, you need to restart (boot) your computer using the installation disc. If you do not restart your computer from the disk, the option to repair your computer will not appear.

  If you have a Windows 7 installation disc:

  1. Insert the installation disc.

  2. restart your computer.

  Click the Start button, click the arrow next to the button lock and then click on restart.

  3. If you are prompted, press any key to start Windows from the installation disc.

  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.

  4. choose your language settings, and then click Next.

  5. click on repair your computer.

  6. Select the operating system you want to repair, and then click Next.

  7. in the System Recovery Options menu, click Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem, and if necessary, it may restart your computer, because it makes the repairs.

  Installation of Windows 7 repair

  Information

  This will show how to do a repair of difficulty your currently installed Windows 7 upgrade installation and to preserve your user accounts, data, programs and drivers of the system.
  THE ELEMENTS THAT WILL BE RESET TO DEFAULT OR AFFECTED:

  • Sounds
  • Services
  • Visual effects settings
  • Device drivers - make sure you have these practice to reinstall. They don't always stay after the installation of repair (upgrade).
  • You may lose your themes custom because no permisions on the old themes. Go to the themes folder hidden in C:/Users /(User-Name)/AppData/Local/Microsoft/Windows/themes, then take ownership of the folder themes and you have now all your themes back.
  • It was reported that you can also lose your Media Center gadget after doing the repair facility.

  WARNING

  You will not be able to do a repair installation of upgrade mode without failure. Installation of Windows 7 DVD that allows you to do repair installation with must be the same or more recent Windows 7 update (ex: level updates Windows or MS) that the currently installed Windows 7. If the DVD is an older version, then you can not do a repair with her installation. You must have at least 8.87 GB of free space, more if you have a larger facility, on the hard drive that Windows 7 is installed on do a repair installation.

  Here's how:

  1. start Windows 7 and log on to an administrator account.

  2 disable the 3rd firewall, antivirus or other security program to avoid what it possibly to prevent the installation of repair of Windows 7 upgrade.

  3. place your installation of Windows 7 in DVD Player DVD while in Windows 7 (step 1) and click on the option of setup.exe run in the AutoPlay window in the currently installed Windows 7. (See screenshot below)

  NOTE: If the AutoPlay window does not open, then open the folder on the drive in the computer and run the setup.exe file.

  4. click on the install button now to start the installation. (See screenshot below)

  5. clear the I want to help make Windows installation better area (unless you want), then click the go online to get the latest updates for the installation option. (See screenshot below)

  6. Windows 7 will now check online and install the available installation updates. (See screenshots below)

  7. check the I accept the license terms box, and click Next. (See screenshot below)

  8. click on the upgrade option. (See screenshot below)

  9. installation of Windows 7 will now begin. (See screenshot below)

  NOTE: During the installation, your screen may flash, and the computer will restart several times.

  10. after the final reboot, you will see this screen for a while. (See screenshot below)

  11. Enter your Windows 7 product key number. (See screenshot below step 12)

  12. uncheck the automatically activate Windows when I'm online box unchecked, and then click the next button. (See screenshot below)

  NOTE: You can activate Windows 7 later after you make sure that it runs correctly. (See step 19 below)

  If you chose to automatically activate Windows online when you set up your computer, automatic activation begins trying to activate your copy of Windows three days after you sign in for the first time.

  13. click on the settings recommended. (See screenshot below)

  14 select your time zone and set your date and time settings, and then click the next button. (See screenshot below)

  15. click on the option for the location of your computer select the settings appropriate to apply to this place network location type. (See screenshot below)

  NOTE: It is best to choose a Public place for the best security.

  16 Windows 7 will now prepare your desktop so that it starts. (See screenshots below)

  17 check if you are missing files from the user. If you are, then you can copy them from the C:\Windows.old or protected which is hidden, C:\$INPLACE.~TR operating system and files backup C:\WINDOWS.~Q. (see screenshot below)

  18. If the power goes out step 17, then you can run Disk Cleanup. You will need to click on the own key file system first and then check that the files ignored by Windows upgrade previous installations of Windows and Windows upgrade log files boxes. (See screenshot below)

  NOTE: This will remove files C:\Windows.old, C:\$INPLACE.~TR, and C:\WINDOWS.~Q from step 17 above.

  19 refresh your performance Windows (WEI) index score.

  20. when completed, all you need to do is to activate Windows 7.

  Let us know if this helps,

  Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot install the update - Windows 7 64 bit (windows installer error - program might not work)

  I am running Windows 7 Home Premium 64-bit. I'm unable to install updates for iTunes (last successful update was my PC itunes 12.2.2.25 64 bit). The error message I get when you try to run the downloaded exe file from apple is: 'there is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your supplier of staff or the package of support ". Please indicate what the problem is and how I can fix. I am not able to backup or synchronize my devices (for example iphone 6 sec) over to my PC as it is said that iTunes must be 12.3 or higher. Thank you - Bryan

  Try to repair the Apple Software Update of the programs and features Control Panel, and then reinstall iTunes.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Receive a Windows Installer error message is not installed correctly.

  the Windows Installer

  Updates missing im and my comp. do not update anything. It keeps popping up that my windows installer is not installed properly. What should I do about it?

  Problems installing and uninstalling programs on Windows computers

  http://support.Microsoft.com/kb/2438651/en-us>

  UTC/GMT is 19:20 on Thursday, October 13, 2011

• XP of Windows 7 doesn't is not accessible you may not to use this network resource

  I can't access a computer in the domain from Windows 7 64 by \\computername of any Windows XP computer. But I can open it without problem and see the folder on the other computer part 7 64/32-bit windows.

  When you access this computer of W7 64 bit XP, error like below

  \\computername is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. »

  The specified server cannot perform the requested operation.

  If trying to access \\computername\sharefoldername

  Error like below:

  "The specified server cannot perform the requested operation."

  Help, please

  Hello

  I would recommend posting this question using the link below, it is better suited for this type of question:

  Windows 7 IT PRO Forum/networking

  Good luck

  B Eddie

• The Windows Installer Service is not accessible

  I try to install Trend Internet Security from a disc. The process gets so far but stops when the message "service The Windows install could not be accessed. This can occur if you are running Windows in safe mode or the installation program is not installed correctly "can you help me?

  http://eSupport.trendmicro.com/default.aspx

  Problem with the Trend Micro software, contact them directly at the link above.

  See you soon. Mick Murphy - Microsoft partner

• Windows Vista C drive is not accessible, the error "the parameter is incorrect."

  I recently got a used laptop and have been clean files and install updates and now my drive "C" indicates "0" bytes. I can't open the files or download anything to try to fix. I also got the message "the parameter is incorrect." Can anyone help?

  I suggest that, as it is a laptop that you reinstall Vista second-hand:

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner