Windows Media 8 guard duplication of music player. If I remove them, the next time they are duplication of trails in Media Player

Similar Questions

• I got a phone call from 'windows', saying that something was wrong with my computer. SCAM? The next time I uped PC there is something bad--much more slowly, etc..

  About a week or two ago, I received a call from someone who said it was the appeal of WINDOWS.  My PCwas work perfect, but I was told there were problems.

  I did not understand what problems he spoke and asked him if he had the right number.  He did not ask my number when I said that if I

  told him to send me a letterexplaining the problem, if something is wrong. Then, I clung to the top.  Is that what you received no other complaints like that?  The

  next time I used the PC, something is indeed wrong - it is very slow now.  I guess that Microsoft would call, not "windows".  In fact

  I do not believe that Microsoft would call either.  Is that what sounds like someone hacked into my PC or what? Thanks for any help.

  On Wednesday, September 5, 2012 18:56:47 + 0000, MartyZA wrote:

  About a week or two ago, I received a call from someone who said it was the appeal of WINDOWS.  My PCwas work perfect, but I was told there were problems.

  I did not understand what problems he spoke and asked him if he had the right number.  He did not ask my number when I said that if I

  told him to send me a letterexplaining the problem, if something is wrong. Then, I clung to the top.  Is that what you received no other complaints like that?  The

  next time I used the PC, something is indeed wrong - it is very slow now.  I guess that Microsoft would call, not "windows".  In fact

  I do not believe that Microsoft would call either.  Is that what sounds like someone hacked into my PC or what? Thanks for any help.

  It was a scam and your hang up was wise. If you gave him no
  in your computer, he didn't hack it.

  Ken Blake, Microsoft MVP

• Whenever I use my iPhone attaches to internet connection, in the window 'Connections available to the general public', my iPhone is presented as "iPhone 1" the next time that I used it, «iPhone 2 "then 3 then 4 etc.»»

  attaches to the iPhone

  Whenever I use my iPhone attaches to internet connection, in the window 'Connections available to the general public', my iPhone is presented as "iPhone 1" the next time that I used it, «iPhone 2 "then 3 then 4 etc.»»  Currently up to 9. How can I stop this from happening? Or is it still important?

  Hello StevenHuurman

  Try this.

  1. turn on WiFi tethering via the iPhone.

  2 connect the system to the iPhone tethered via the wireless connection.

  3. without closing the iPhone tethering, disconnect the straps of the iPhone system.

  4. now reconnect the system to the loin and Note If the wireless connect denominator increases.

  For the above steps, if you have access to other computers, then try the same steps and allow to know the results of these institutions.

  If the denominator goes up so we know it is a problem with the system and if not then whenever you turn off modem, then again on the iPhone are considered as a new network connection and something has changed in the phone.

  Another thing, you have selected the option for the system to connect automatically when this network is in range?

  Unfortunately I do not know what version of the OS you have here are the steps for Windows Vista and Windows 7. During the installation process for Windows Vista and Windows 7, you will see the option "connect automatically when this network is in range. Make sure that you click this box when you configure the connection to the loin.

  Let me know the results. Thank you.

• Updates the window appear when shutting down, but do not set up the next time you start

  The display shows 15 updates of Windows are loaded (installed?) when the machine is stopped.  To restart Windows, the screen indicates "wait" while the updates are being configured.  The icon indicates that the configuration is current, but the screen always said that "0% are completed.  Then, after a few minutes, the screen indicates something as "installation failed; Revenant.  After the message 'return', the machine moves to the usual Windows 7 start page and asking to connect you as usual (which allows me to work on the machine).   So, the next time I shut down Windows, the screen indicates that the installation of several updates continues and is completed in series.  Then, the next time I turn on the machine it asks to wait while updates are configured;  and finally, it "fails to complete the configuration" and "resets" as described above.  What happened several times in the last two days.  What should I do to get this resolved failure?

  Hi BonnieDoon,

  1. did you of recent changes on the computer?

  2. you receive error message during the update by installing the process?

  Method 1

  See the Microsoft article below as well as try the steps mentioned and check if it works.

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/949358

  Method 2

  Restart the computer after you follow the steps above and check if the problem persists, if the problem persists then checks the update is not being properly installed on the computer and then install it manually.

  View update history to know which update is not installing.

  (a) open Windows Update by clicking Start , all programsand then click Windows Update.

  (b) in the left pane, click view update history.

  (c) to view more information about an update, double-click it.

  Once you know the update's KB number then visit the Microsoft Download and put the number in the search box, download and install the update manually.

  http://www.Microsoft.com/downloads/en/default.aspx

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• the service windows defender on local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs.

  the service windows defender on local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs.

  Hello

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

  and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

       and read this information to microsoft:

  Error message when you run Windows Defender: «Error 0x800106ba»

  http://support.Microsoft.com/kb/931849

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial;

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this program;

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• Windows 7. I was on a field but myself removed from the latter. But now it always gives me my domain login screen as if she is still on the field, but I'm not

  Hello

  I have a problem with windows 7. I was on a field but myself removed from the latter. But now it always gives me my domain login screen as if it is still on the field but I'm not and I tried to do a restore system to a date until I was connected to the domain, but it keeps defaulting. Only, I can access my accounts the safe mode.

  It's something that you should discuss with your domain administrator.

• Can I record information such as Playcount and Auto rating data from Windows Media Player so that the next time I reinstall windows I can just update?

  Recently, I have reinstalled my windows 7 due to the error in the IP Helpdesk (perhaps due to a virus). When I've reconfigured my WMP, I found that all my statistical data have been lost. Its a huge fork - my three years of statistics reduced to ashes. Can I do something to prevent it?

  Hello

  You can use the canned my ratings stars as global ratings in the option files store classification data, but the game number is not possible.

  Refer to this article:

  http://Windows.Microsoft.com/en-us/Windows7/media-information-in-Windows-Media-Player-frequently-asked-questions

  To play account, you will need to use your favorite search engine to find a software that allows you to record information from Windows Media Player.

  Note: Using third-party software can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• Pop-up ads continue despite all the information here regarding remove them.  I think they were watching when I downloaded an update for Adobe Flash Player.  All of the suggestions!

  I use OS x El Capitan 10.11.2 on my 3.2 GHz, 8 GB Mac.  I keep getting the pop - ads that those scam ads reply and get their malicious software solution.  I also get the help line 'Apple' where someone's endearing supposedly walk me if they can help.  I tried all of the solutions in the Apple support groups, but nothing has worked... remove extensions (don't have), in order to put the files listed in 'Go to Folder' (none came, so I couldn't remove them).  Any ideas?  It seems that it got worse after I received a notice to update my Adobe Flash Player... maybe a false update.

  1. the present proceedings is a diagnostic test. It doesn't change anything for the better or worse and therefore, by itself, will not solve the problem. But with the help of the results of the tests, the solution may take a few minutes, instead of hours or days.

  The test works on OS X 10.7 ("Lion") and later versions. I do not recommend running it on older versions of Mac OS X. It will do no harm, but it will not do not much good.

  Do not be put off by the complexity of these instructions. The process is much less complicated than the description. You make the tasks more complicated with the computer all the time.

  2. If you do not already have a current backup, please back up all the data before doing anything else. The backup is needed on the general principle, not because of what anyone in the test procedure. Backup is always a must, and when you encounter any kind of problems with the computer, you can be more than the usual loss of data, if you follow these instructions or risk not.

  There are ways to back up a computer that is not fully functional. Ask if you need advice.

  3 here is instructions to run a UNIX shell script, a type of program. As I wrote above, it doesn't change anything. It does not send or receive data over the network. There is no to generate a report on the State of the computer human readable. This report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents for me or someone else.

  You should ask yourself if you can believe me, and if it is safe to run a program at the request of a foreign national. In general, no, he's not sure, and I encourage it.

  In this case, however, there are ways for you to decide if the program is safe without having to trust me. First of all, you can read it. Unlike an application that download you and click to start, it is transparent, so any person with the required competence can check what it does.

  You may not be able to understand the script yourself. But variations of it have been posted on this site of thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. One of the million registered users to have read the script and set off the alarm if it was dangerous. Then I wouldn't be here now, and you would not be reading this message. See, e.g., this discussion.

  Another indication that the test is safe in this threadand this onecan be found, for example, where the comment in which I suggested it was recommended by one of the specialists of the communityApple, as explained here.

  However, if you cannot satisfy yourself that these instructions are safe, do not follow them. Ask other solutions.

  4. here is a general summary of what you need to do, if you decide to go forward:

  ☞ Copy a particular line of text to the Clipboard.

  ☞ Paste into the window to another application.

  ☞ Wait for the test to run. It usually takes a few minutes.

  ☞ Stick the results, which will be copied automatically, in a response on this page.

  These are not specific instructions; just a glimpse. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait and paste it again. You don't need to copy a second time.

  5. try to test in conditions that replicate the problem, to the extent possible. For example, if the computer is slow intermittently, run the test during a downturn.

  You may have started up in safe mode. If the system is now in safe mode and works pretty well in normal mode to test run, restart as usual before running it. If you can test only in safe mode, this.

  6. If you have more than one user and a user is affected by the problem, and the user is not an administrator, and then run the test twice: once under the affected user and one administrator. The results can be different. The user that is created automatically on a new computer, when you start it for the first time is an administrator. If you are unable to log in as an administrator, verify that the user concerned. More personal Mac have only one user, and in this case this section does not apply. Don't log in as root.

  7 load the linked web page (the site "Pastebin.") The title of the page is 'Diagnostic Test'. Under the title is a text box, headed by three small icons. The right one represents a Clipboard. Click on this icon to select the text, then copy to the Clipboard of your computer by pressing Control-C key combination.

  If the text is not highlighted when you click the icon, select it in triple - click anywhere inside the box. Do not select the whole page, just the text in the box.

  8. start the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing Command + V, then press return. The text that you pasted should disappear immediately.

  9. If you see an error message in the Terminal as "Syntax error" or "Event not found", enter

  exec bash

  and press return. Then paste the script again.

  10. If you logged in as an administrator, you will be prompted for your login password. Nothing displayed when you type. You won't see the usual points instead of the characters typed. Make sure that caps lock is turned off. Type carefully, and then press return. You can get a warning to be careful. If you make three unsuccessful attempts to enter the password, the test is still running, but it will produce less information. If you do not know the password, or if you prefer not to enter, just press back three times at the password prompt. Yet once again, the script will run.

  If the test takes much longer that usual to run because the computer is very slow, you can be prompted for your password a second time. The permission you grant by entering it will expire automatically after five minutes.

  If you are not logged as an administrator, you will be prompted for a password. The test will run. It just will not do anything that requires administrator privileges.

  11. the test may take a few minutes to run, depending on the number of files you have and the speed of the computer. A computer that is abnormally slow may take more time to run the test. During execution, a series of lines is displayed in the Terminal window like this:

      Test started

          Part 1 of 4 done at: … sec        …        Part 4 of 4 done at: … sec

      The test results are on the Clipboard.

      Please close this window.

  The intervals between the parties will not be exactly the same, but they give an approximate indication of progress.

  Wait for the final message "Please close this window" appears. If you don't see it in about 15 minutes, the test probably won't be all within a reasonable time. In this case, press the Ctrl + C key combination or the point command to stop it. Then go to the next step. You will have incomplete results, but still something. If you close the window of the Terminal, while the test is still running, the partial results will not be saved and you have to start over.

  12. when the test is finished, or if you have stopped it because it was taking too long, leaving the Terminal. The results have been saved to the Clipboard automatically. They do not appear in the Terminal window. Please do not copy from there. All you have to do is start a response to this comment and then paste it again by pressing Command-V.

  At the top of the results, there will be a line that begins with the words «Start time.» If you do not see that, but rather to see a mass of gibberish, you wait for the message "close this window". Please wait and try again.

  If personal information, such as your name or e-mail address, appear in the results, make anonymous before posting. Usually it will be not necessary.

  13. in the validation of the results, you see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the software which manages this website. Thanks for posting the results of the tests on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  14. This is a public forum and others can give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but what're told you to do maybe not. For others who choose to run it, I do not recommend that you view the results of test on this Web site unless I ask.

  ______________________________________________________________

  Copyright © 2014, 2015 by Linc Davis. As the sole author of this work (including the "Test of diagnosis" referenced), I reserve all rights except as provided in the terms of use agreement for the site of Apple support communities ("CSA"). ASC readers can copy for their personal use. The whole nor any part can be redistributed.

• I just had to activate my Windows Vista via the phone. Can I do it again the next time I have reformat my computer?

  I once invited by Microsoft to activate my windows vista using phone... Thus, you will be asked to activate windows vista by using phone next time I have reformat my laptop?

  It is likely, but maybe not.

  Sometimes the internet activation works but stops working if you activate the product too expensive.

  For example, I reinstalled Windows and Office 5 times (on the same computer) in 2 weeks before and the activation of the internet has stopped working so I had to activate by phone.

  However a few months later the line internet activation reworked.

• I get this when I disable the windows desktop or shut down my computer: "Windows recovered from unexpected shutdown and will try to fix it the next time you connect." (Nothing happens when I go online):

  problem signature:
  Problem event name: BlueScreen
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033

  More information about the problem:
  BCCode: 1000008e
  BCP1: C0000005
  BCP2: 909F1088
  BCP3: AD9B1A54
  BCP4: 00000000
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\Mini030310-01.dmp
  C:\Users\dlm\AppData\Local\Temp\WER-13961325-0.SysData.XML
  C:\Users\dlm\AppData\Local\Temp\WER784E.tmp.version.txt

  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  Hello

  The BCCode indicates a driver error. The dump file may contain information needed to diagnose the problem. Can you send this file to me at rick_at_mvps_dot_org with a subject line of "req" (anything else is unlikely to cross the filters and is summarily deleted):

  C:\Windows\Minidump\Mini030310-01.dmp

  If you do not see the file or the folder that contains, in Windows Explorer/Tools/Folder Options or control panel/Folder Options go to the view tab and check the line to show hidden and system files and clear the line to hide operating system files. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• I have a HP tc4400 with windows 7 but not even pressure sensitivity with what I think is the right driver, why are there no pressure sensitivity?

  I am currently using windows 7 Ultimate edition with a HP compaq tc4400. After a clean install, I am able to use my stylus but there is no pressure sensitivity which causes problems with photoshop and paint tool sai and other programs that use the pressure sensitivity. I am currently using windows vista driver called "Minidriver Wacom digitizer" I saw that others of the same type of computer works just fine and it is normally pressure sensitivity... I'm curious to know if I installed the wrong driver, or if there is something wrong with the installation.

  Hello

  I suggest you to please contact the HP support for assistance.

  Link to download the drivers: Drivers HP for Tablet PC tc4400

  Contact HP Support: HP Support

  I hope this helps!

• I can't find my photos in the library, although they are accessible through the office. spent hours trying to get the library to open with them in windows 8. any suggestions before I go to apple?

  Can't access my live photos of tiles at the start, even if it worked until a few weeks ago. whenever I'm on the floor, he says: "unable to find all the photos in your library. They are available in desktop under my images, but several attempts of resolution of the problem were not successful and I am very frustrated with this!

  I realized how difficult Windows 8 would be to navigate, I would have changed my Apple!
  Pictures were also a real pain with Windows Vista like so many different programmes of production/organization etc.
  Any solutions would be welcome!
  CC

  From the desk of
  Press the Windows key + R
  Type WSReset.exe and press OK

  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

  Method 3:

  
  You can try to run Apps Troubleshooter

  Download and run the troubleshooter modern UI App and check.

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  Please use the following links as reference:

  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

• How do I make pop up windows back to the left side of the screen when they are moving to the right?

  Whenever I click on a link, a new window opens. That's good, that's what I wanted. They always opened up on the left side of the screen. However, they now open in the middle of the screen. It's already happened and the screen finally opened completely on the right. Last time this happened, I ended up having to remove something. I don't know what, but it solved the problem. Help, please!

  You can check the problems caused by a corrupt localstore.rdf file.

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

  You can also try to emove the plist of Firefox (org.mozilla.firefox.plist).

  • http://www.MacFixIt.com/article.php?story=20060606082246983 how the .plist files become corrupted and results troubleshooting

  Go to "~/Library/Preferences" and delete the plist for Firefox (org.mozilla.firefox.plist)

• I have just Setup iPhone 3GS from my wife. Through iTunes, I loaded music, Photos, Contacts, and calendar. There is no Photos icon on the screen. They are responsible because appear it as choices in the selection of paper painted. help please. Thank you.

  I have just Setup iPhone 3GS from my wife. I.O.S. 6.1.6. Through iTunes, I loaded music, Photos, Contacts, and calendar. There is no 'Photos' icon on the screen. The photos are loaded because appear it as choices in the selection of wallpaper. I would be grateful for any help with this. Thank you.

  Jimbo1307 wrote:

  I have just Setup iPhone 3GS from my wife. I.O.S. 6.1.6. Through iTunes, I loaded music, Photos, Contacts, and calendar. There is no 'Photos' icon on the screen. The photos are loaded because appear it as choices in the selection of wallpaper. I would be grateful for any help with this. Thank you.

  Double check the app folder or home screen.

  Cannot delete the built-in app, so go to settings - general - reset - Reset available to the home screen.

• Is there a setting I need to change the windows Defender because my laptop and an iphone4 work together properly on the internet, and they seem to take turns?

  I contacted my internet provider several times in recent weeks and they haven't a clue what's wrong, so they want to send a technician for £180, but a friend had the same problem and contacted PCWorld and they said that it is to do with the security setting so he then contacted McAffee and they changed the type of security on the router WPA2-Personal wireless to another and apparently it works fine now so do you think that's what I have to do? Sorry if this is real confusing :) kind regards D

  Isn't it clear what your problem is, but if you use McAfee (based on what I read on other forums) you should probably uninstall or disable Windows Defender on your laptop.  Windows Defender and McAfee may not work well together as MSE and McAfee should not be used on the same computer.

  Some older portable computers (such as my Dell Inspiron 5100 with XP Pro 2004) does not connect to a WPA-2 wireless router - mine only works with WEP and WPA.  Maybe it's the cause of your problem, but of course if your laptop is new, it should work fine with WPA-2.

  Given that your problems are not associated with MSE, why not ask your advice in the Microsoft Windows Forum at http://answers.microsoft.com/en-us or on the website of the manufacturer of your router and maybe they can help.

  Good luck...