Windows Media Center on Equium 100-147

Similar Questions

• Videos magnified more than 100% in Windows Media Center

  "Original title": dvd burning windows media center "

  Hello. I used Windows Media Center successfully, indicates T.V burn to DVD for years. All of a sudden, I'm having a problem where the image on the television screen is amplified at least 100%, which makes it very bad. I searched the forums and the Net without success rsearched. I use Windows Vista Home Premium 32 Bit. I have deleted the recent programs downloaded before this problem, but it did not work. It's very frustrating. I hope you can help.

  Martin

  Hello

  In addition, I suggest that research from the links below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions

  hope this helps,

  Eddie B.

• Window Media Player.exe using 100% of CPU and memory

  I have a Pavilion dv4-2145-dx Windows 7 Ultimate SP1, 4 GB of memory. Windows Media Player.exe supports my CPU 100% usage and it is striking all my memory - 4 GB.   It started right after I set up a homegroup.

  I had to go into Admin/service and change the Startup Type to disabled for:

  • Windows Media Center Receiver Service
  • The window media services planning service
  • Windows Media Player Network Sharing Service

  I tried setting services to manual, but Windows Media Player has yet caught all the CPU and memory, he could then I disabled all the.

  I do not know how to disable homegroup and Windows Media Player services work together so I wonder if everything is always operate has designed with the homegroup and sharing my music.

  Hello

  I think this explains the problem.  The 2 entries here should be deleted, because the first will try to index all of your user profile and the second will attempt to index all of the Windows Partition.

  C:\Users\Rick

  C:\

  To remove them, click to the left of the entrance, highlight it, and then click Remove.  When these two entries have been removed, reboot the laptop and you should find that the problem has been resolved.

  Kind regards

  DP - K

• Windows Media Center showing no TV signal

  When I go into WMC I select a television channel of the electronic Program Guide and WMC is back with a message:

  No TV Signal: There is currently no signal detected for this channel TV. The channel can be temporarily off the air, or you need to maybe adjust or reconnect your TV antenna.

  Problem with WMC > TV > Live TV > no TV Signal

  Here is a summary indicating the State of the map CableCard.

  Status of CableCARD

  The card manufacturer: Motorola
  Authentication of maps: success
  Activation of the card: success
  3DES encryption: support
  OOB frequency: 75,250 MHz
  OOB Lock: 2,048 Mbit/s
  Signal strength: 100% (2.1 dBmV)
  The quality of the signal: 100% (41.7 dB)
  Channel list: cablecard-oob

  When I go to HDomeRunSetup and try to do a scan of the CableCard card for all three tuners it again relates that the device/card is not the list of channels. I checked the cable connection and LED a green identity card.

  Where should I go from here?

  Hello

  • You did it all changes before the show?
  • What version of Windows are you using?

  You can stop the recording manually by double-clicking on the program and then click on stop recording. If the problem persists, try restarting your computer.

  Step 1: Check if there is an update available for Windows Media Center on your computer
  a. see the updates Windows Installer
  b. install updates and restart the computer.
  c. check the difference.

  Step 2: check if there is an update available for your TV tuner card
  see automatically get recommended drivers and updates for your hardware .
  b. install the update just for your device and restart the computer.
  c. check to see if the problem persists.

• Can I watch a show that is currently recording in Windows Media Center since the beginning of this show?

  I use Windows Media Center to record TV shows.  Suppose I record a show in an hour at 6:00, and I decide to 06:10 I want to watch this show from the beginning. (while it's recording)

  Is it possible to do this in Windows Media Center?  The media file of the recording of the show is not accessible until it is 100% finished recording.

  I am looking for a way to watch a show while it's recording, but to do so since the beginning of the show (after the start of recording)

  Thank you

  Hello

  Im sure that you can watch TV recordings during live TV recording, but you can't watch a program during its course of recording.

  See also:

  This management recorded TV in Windows Media Center: frequently asked questions

   

  http://Windows.Microsoft.com/en-us/Windows-Vista/Managing-recorded-TV-shows-in-Windows-Media-Center-frequently-asked-questions

• How to change the rendering used for video playback in Windows Media Center Version 6 engine

  I usually use other media players, but I would like to first of all using Windows Media Center. However for the moment video playback is not good because of the weird colors (everything is displayed in black and Red instead of normal colors). When you use other media players, I use the Haali rendering engine which gives good results for video playback.

  Can you tell me how to change the rendering used by Windows Media Center?

  Also, I noticed the same weird color effect in Windows Media Player 11.

  Hi Woobee,

  1. What is the brand and model of the computer?

  2. what graphics card use on the computer?

  If you are using an Nvidia graphics card on the computer, in the Nvidia Desktop Manager, you will find an option for saturation to ensure it is set to 100%.

  And if you are any other graphics card on the computer and search for a similar option for saturation.

  If the previous step fails in Windows media player, so be sure that the hue and Saturation are defined by default.

  1. click on the arrow on the tabplaying , point to enhancements, and then clickcolor picker.

  2. do one of the following:

  1. to return to the default color, click thereset link.

  Also, make sure that the video settings are set by default.

  1. start the playback of a file.

  2. click on the arrow on the tabplaying , point to improvements, and then clickvideo settings.

  3. click onreset.

  Check also in Windows Media Center if the

  1. on theStart screen, go to tasks, click settings, clickgeneral, then Visual and sound effects.

  2. undercolors ensure that Windows media center standard is enabled.

  Turn off Visual and sound effects in Windows Media Center

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-off-Visual-and-sound-effects-in-Windows-Media-Center

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• What version of Windows to get Windows media center included?

  I'm going to buy a new machine and I wanted to know what is the best version of Windows to get installed that includes Windows media Center?

  Thank you

  On Tuesday, April 7, 2015 19:16:36 + 0000, Gary Gary Gary wrote:
   
  > I'm going to buy a new machine and I wanted to know what is the best version of Windows to get installed that includes Windows media Center?
   
  Microsoft does not Media Center Windows 10 to be released
  later this year, so everything you buy with Windows Pro 8.1 with Media Center, or
  Windows 8.1Pro more than one $10.00 go to Media Center or Windows 8.1 for $ 100
  upgrade to Pro + Media Center is a machine, to that you will not be able to upgrade
  Windows 10 If you want that Media Center.
   
  There has not been a team of dev to Media Center for some time. Ms. believes that it is
  dead.
   
  My advice to you is to seek alternatives such as XBMC, etc to replace your
  Media Center needs.
   
   
   
  __________________________________________________________________________________________________
  Barb
  MVP Windows Entertainment and connected home
  My Blog - http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   

• Not able to run the digital cable Advisor in Windows Media Center

  Digital cable Advisor

  I can't get the digital cable Advisor in Windows Media Center in Windows 7 Home Premium.  After I installed Windows back me to the same Setup screen.  From what I read on the program, after installation it is supposed to start.  I checked the Extras Gallery and it does not appear there after installation.

  Chris-

  I started taking screenshots of the process tonight and of course the DCA installed successfully and actually worked!  My system has passed the test.  I tried installing in DCA 100 times before and never had that day!

  I suspect that the root cause was due to a problem with the motherboard that was recently repaired.  At least that's my story and I stick to it!

  Thanks again for your help.

  Buggy

• "created the slideshow" inside loop problems (Windows Media Center) during playback

  Why didn't Windows Media Center during playback of a repeat of the start file "slideshow created with music" and / or "loopback", with only the first 20 or so (on perhaps a 100 total on the full slideshow) slides or photos over and over again without showing the rest of the majority of the slides at all?

  Hey trasel,.

  Unfortunately, it is not possible to include another small video clip for an existing video on which you have already created.

  However, you can create a new slide and add it to the existing one.

  Check out the link below howcreate slide shows in Windows Media Center:

  http://Windows.Microsoft.com/en-us/Windows-Vista/your-pics-on-the-big-screen-create-slide-shows-in-Windows-Media-Center

  Kind regards

  Savan - Microsoft technical support.

• I get a black screen when I play videos in Windows Media Player and Windows Media Center.

  Until recently, all worked well for a long time. Now when you try to watch live TV or a DVD, I get a black screen with sound in Windows Media Center and trying to watch a DVD in Windows Media Player I also get a black screen with sound. The controls are there and functioning normally. DVDs are normally visible in the K-Lite Media Player Classic.

  I have Windows 7 Ultimate 64-bit, a tuner TV of SiliconDust HD Homerun networked and a videocard ATI Radeon 4550. I have all the latest updates.

  I found and tried many recommendations of the Internet for problems like this, and none helped.

  The video card driver is the latest provided by ATI to Microsoft for Windows Update and is dated from 19/04/2011. I tried to install the latest Catalyst software and driver from the ATI site, which does nothing to help, and then uninstalled. These drivers provide no option to adjust the hardware acceleration.

  I had an older version of K-Lite codec package installed. The problem does not change if I have the old version, the last 32 + 64 bit version or no version installed.

  In Control Panel, I tried to disable Windows 7 media, reset their reactivation components and reboot again. There is nothing.

  I had an older version of installed package from Cyberlink. The problem remains the same if I have the old version, the version the most recent or any installed.

  I tried to uninstall all Apple software: QuickTime, iTunes, etc. There is nothing to help.

  I tried to create a new user account; same problem there.

  I have VMware and a virtual machine that is running 64-bit Windows 7 Professional. In this machine, I can view DVD normally with Windows Media Player, using the same physical DVD drive. I don't have Media Center set up in this machine.

  Title photo: original No. in Media Center and Media Player

  The problem is now resolved. I removed the software installed probably because the problem started, and Cisco Webex, which I did not need, was probably the culprit, although I'm not 100% sure.

  Thanks to those who have tried to help.

• How to separate my Windows 7 libraries/Homegroup and Windows Media Center the share permissions?

  I used to share media from my laptop Windows 7 for my Xbox 360 and my Windows XP computer using Group residential and everything was great, but I decided to use WMC so I could see more files on my Xbox 360.

  But after you have configured the WMC as Xbox 360 Extender, it reset my permissions and locked the folders that I was sharing with homegroup. After you have unlocked records, he deleted all the files in my library, and anytime I want to share a folder with the homegroup, its in my list of WMC,.

  Whenever I remove a sharing folder in WMC, it resets my home group and locked files. I don't want that.

  At any time, I share a folder to my homegroup, sharing in Windows Media Player (it's a NO!) I don't want that at all)

  WMC can sometimes have trouble sorting files when its comes to 100 and 1000 s, I want to keep my Homegroup library and my library of WMC separate share. Which means I want my homegroup, my library and Windows Media Centers, sharing folders, all sharing the same folders.

  How can I do this?

  Hello

  I suggest you to check the suggestions of the binding.

  http://experts.Windows.com/w/experts_wiki/use-HomeGroup-with-Windows-Media-Center.aspx

  Hope the information is useful.

• CREATIX card TV no longer works for Windows Media Center after you install Vista Edition Home Premium to Windows 7 Professional

  I recently updated my computer Windows Vista Edition Medion Home Premium to Windows 7 Professional. While my computer was running Vista, I could use the tuner TV SAA7131 Creatix card in my computer to watch digital TV British, that is to say Freeview. Before my upgrade to Windows 7, I checked all my drivers would be compatible, and the Advisory program told me that they would be sufficient. However, when I tried to setup of the library to receive a TV signal, the implementation will not progress beyond the screen "Considering television signals" Percentage of completion bar gets to about 90% and then does not move, or entirely 100%, but the screen does not change, and if I try to return to the main menu screen, Windows Media Center crashes with the 'circle of rotation of loading"and does not change.

  I reinstalled Cyberlink Home Cinema after realization of the Medion TV improve extra that comes with it, but that didn't seem to help. The same problem persists.

  I have still the disk with the drivers on, but I'm not sure how to reinstall the drivers using the disk, because the record for drivers TV Tuner does she not an executable file, just a series of system files, application extensions and the DAT files.

  Any help would be greatly appreciated.

  You must find the CTX driver version in the code of your tv card provider (poster Device Manager it under hardware ID in the Details tab) in the list of suppliers PDF in the FAQ section of the site Creatix. Then, you can download the right CTX driver from the support section. Is there a Windows 7 driver for my SAA7131 card.

• How can I get Bluray look a supported in Windows Media Center on Windows 8 Pro?

  I saw no definitive answer anywhere on the support Blu - ray for WMC. Is there a codec download or do I really need to spend $100 + to buy CyberDVD just to watch Blu - Ray? I was on the right track to buy a Blu - ray to my PC player so I could throw the Blu - ray player in total but have read a lot of people say that reading doesn't is not supported even in Windows Media Center for me at this time there should be a standard for Blu - ray support.

  I saw no definitive answer anywhere on the support Blu - ray for WMC. Is there a codec download or do I really need to spend $100 + to buy CyberDVD just to watch Blu - Ray? I was on the right track to buy a Blu - ray to my PC player so I could throw the Blu - ray player in total but have read a lot of people say that reading doesn't is not supported even in Windows Media Center for me at this time there should be a standard for Blu - ray support.

  Unfortunately, as in Windows 7 there no Blu - ray for the WMC or WMP support in Windows 8 PRO either. You need a separate application for playing Blu Ray.

• Satellite P - Windows Media Center problem

  Without any visible problems or bug virus threats, Windows Media Center starts to crack on video output.

  Just randomly losing pixels on a screen and all other similar programs like wmp, vlc media player, mv2, and Intervideo Win DVD works properly?

  Hello!

  You have installed any Service Packs or patches for your operating system?
  Check on the Microsoft update Web site.

  I think that your assignment isn't really clear. Can you please explain this exactly?

  Good bye

• Windows Media Center "to listen or look at a conflict"... does not recognize the TV tuner

  I have completely exhausted the forum Windows Media Center for response to the resolution of this problem. I replaced my unit ATI TV Wonder Digital Cable Ready, as well as my graphics card tuner, and WMC still says 'No TV Tuner Found"and the message" listen or look at a conflict - no tuner available to meet the current demand "when I try to watch live TV. I have also a "no tuner hardware detected... Please ensure equipment is installed correctly...» "if I try to set up the TV Tuner again.

  I don't think that my answer lies in Windows Media Center or hardware from ATI. I'm now trying to figure out if it involves this feature installed at the factory of HP listed on the bottom of my computer: "GENUINE WINDOWS VISTA HOME Premium TUNER DIGITAL". I understand that it is the software and hardware.

  I would be grateful if anyone has answers. If anyone knows what this function is that was installed at the factory, and how I can uninstall and reinstall the software and replace the hardware, I understand that too.

  Thank you

  After unsuccessfully trying everything I could find that had the potential to solve my problem, I finally solved the problem myself.

  It's actually a corrupted Windows file that allows my TV tuner, which caused all my problems. I reinstalled my Vista operating system to its original state, and now the ATI TV tuner works fine. Easier said than done.
  
  Mr. Fix It