Windows Media Player fails to read DVD-video

Similar Questions

• Windows media player cannot play the dvd video.might need to adjust the windows display settings

  Windows media player cannot play the dvd video.might need to adjust the windows display settings

  Hello

  1. Have you made changes on the computer before this problem?
  2. You get the error message?

  I suggest you try these methods and check the status of the issue.

  Method 1:

  Open the troubleshooter in the Windows Media Player settings:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2:

  Install the latest version of codecs:
  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

  Warning: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Method 3:

  Update a hardware driver that is not working properly.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Error - Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection. Cannot read any DVD.

  Original title: unable to play any DVD

  "Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD player and the video card protection decoder. Try to install a driver available for your video card.

  I tried to update all the drivers but the problem persists

  Hi Neil,

  1. have you made any hardware changes or software on the computer before this problem?

  2. what version of windows Media Player do you use?

  You can follow this link & check if the problem persists.

  Windows Media Player Error Message help

  
  Reference: How to troubleshoot issues that occur when you play a DVD in Windows XP?

  Hope the helps of information.
  Please post back and we do know.

• DVD Windows media player cannot play this dvd because it is not possible to activate the ANALOG on the output display copy protection try to install a driver available for your video card

  When you try to play a dvd it (above) is displayed. Anyone know where I can be able to get a updated driver free for my video card, or in any other way to solve this problem. your help would be greatly appreciated. Thank you.

  When you try to play a dvd it (above) is displayed. Anyone know where I can be able to get a updated driver free for my video card, or in any other way to solve this problem. your help would be greatly appreciated. Thank you.

  =======================================
  What version of Windows are you using?

  The free VLC Media Player may be worth a try...

  It will play anything.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player (32-bit Version)
  http://www.filehippo.com/download_vlc_32/
  (works on XP, Vista, 7, 8)
  (the name of the file to download is: vlc - 2.0.5 - win32.exe)

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player (64-bit Version)
  http://www.filehippo.com/download_vlc_64/
  (works on XP, Vista, 7, 8)
  (the name of the file to download is: vlc - 2.0.5 - win64.exe)

  And the following links may be worth a visit:

  (2004673) Windows Media Player cannot
  read the DVD because it is not possible to
  turn on analog copy on the output protection
  view
  http://support.Microsoft.com/kb/2004673

  Windows Media Player cannot play the DVD because it is not
  possible to put on the protection against analog copying on the output screen
  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=12.0.7100.0&ID=C00D1167&ContextId=61&OriginalID=C00D1167

• Why windows media player is not reading my DVD, and how do I install windows media player decoder using my drive from windows XP Professional?

  Media player from Windows

  Why windows media player is not reading my DVD, and how do I install the windows media player decoder using my disk of windows XP Professional

  FWIW... Win XP cannot natively recognize Commercial
  DVD video... it requires a DVD decoder. And... He
  is not a DVD decoder on your Win XP Pro drive.

  If you could play before commercial video DVD...
  do a system restore to a time before this started
  may be your solution.

  Or you could buy a DVD decoder at the following link:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Info about DVD decoders:
  Plug-ins for Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player/plug-ins

  Or you can download and use one of the following freeware
  media players:

  VLC Media Player
  http://www.filehippo.com/download_vlc/
  (works on XP/Vista/7)

  Media Player Classic Home Cinema
  http://MajorGeeks.com/Media_Player_Classic_Home_Cinema_d6213.html
  (works on XP/Vista/7)

  Or... you can try to download and install one of the
  Following codec packs.

  (FWIW... it is always preferable, if you create a system restore
  point before installing any software or updates).

  * Proceed at your own risk *.

  (1) K-Lite Codec Pack (full)
  http://www.filehippo.com/download_klite_codec_pack/
  (Windows 2000 / XP / 2003 / Vista / Windows7 / XP64 / Vista64 / Windows7 64)

  (2) information on CCCP (combined Community Codec Pack)
  http://www.CCCP-project.NET/wiki/index.php?title=Main_Page
  (XP SP1 or more, Vista, Windows 7 - 32 bit - 64 bit)

  (3) Windows 7 Codec Pack
  http://download.CNET.com/Windows-7-Codec-Pack/3000-13632_4-10965840.html
  (2000/XP/2003/Vista/Server 2008 / 7)

  (4) Media Player Codec Pack
  http://www.mediaplayercodecpack.com/
  (Windows XP - Vista - 7)

  Good luck...

• Cannot read DVDs, error: Windows Media Player cannot play the DVD because no compatible DVD decoder is not installed on your computer

  DVD playback problem started today.  SE message: Windows Media Player cannot play the DVD because no compatible DVD decoder is installed on your computer ot.  I have not had this problem before.

  Hi RosemaryHanna,

  Thanks for posting in the Microsoft community!

  I understand that you are unable to read the DVD. I will try to help you with this question.

  (1) did you make any changes before the show?

  (2) the video works fine when playing any video recorded or audio files on the computer?

  Method 1: Solve the video issues in Windows Media Player and other media or library

  http://support.Microsoft.com/mats/windows_media_player_diagnostic/?WA=wsignin1.0

  Method 2: You can see the steps mentioned in the article below

  Supported decoders MPEG - 2 software DVD in Windows Media Player for Windows XP and Windows Vista

  http://support.Microsoft.com/kb/306331

  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Let us know the status of the issue. I will be happy to provide you with the additional options that you can use to get the problem resolved.

• Cannot read DVD or CD error: "Windows Media Player cannot play this DVD because no compatible DVD decoder is not installed on your computer.

  Original title: I CANNOT READ THE DVD OR CD ON MEDIA PLAYER, IT is A what NO NOISE 'n' INSTALLED EITHER ALL THE IDEAS THAT DO?

  I HAVE PROBLEMS WITH THE PLAYER ON MY LAPTOP, I JUST GOT ALL OF THE DELETED CONTENT SO THAT IT IS FIXED AND I AM UNABLE TO PLAY DVDS OR GET ANY SOUND MEDIA PLAYER WHEN I ENTERED A DVD THE MESSAGE READ:

  "Windows Media Player cannot play this DVD because no compatible DVD decoder is not installed on your computer."

  ANY IDEAS PEOPLE? I THINK I NEED TO REINSTALL THE SOUND AND EVERYTHING BUT DON'T HAVE ANY IDEA OF THAT KIND OF THING OR WHERE TO GET IT FROM :( ANY HELP WOULD BE GREATLY APPRECIATED.

  Hi SARAH-82.

  The sound works fine when playing any video recorded or audio files on the computer?

  Method 1: You may need to download the audio effect plug-ins or ability of DVD in Windows Media Player, please visit the link below

  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player/plug-ins

  Method 2: You can see the steps mentioned in the article below

  Supported decoders MPEG - 2 software DVD in Windows Media Player for Windows XP and Windows Vista

  http://support.Microsoft.com/kb/306331

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Method 3: To the problem of audio or audio playback, you can follow the steps mentioned in the link
  Tips for solving common audio problems

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows Media Player cannot play back the video DVD.

  Windows Media Player cannot play back the video DVD. You may need to adjust your Windows display settings. Open display settings in Control Panel, and then try to lower your screen resolution and color quality settings.

  Original title: Windows Media Player cannot play back the video DVD. You may need to adjust your Windows display settings. Open display settings in Control Panel, and then try to lower your screen resolution and color quality settings.

  I was troubleshooting video playback issues throughout the morning after the reconstruction of a machine with a fresh install of W7 Ultimate, shot a few questions there.

  The first and foremost reason I couldn't play THE VIDEOS was due to the ATI Rage video card that was in the machine, proved that this card was not compatible for playback of DVD video on W7.  No problem with the system of video files (.avi, .mpg, .mp4, etc.), only reading DVD.  Disabling this card and media player running with a standard VGA device allowed me to play regular DVD movies very well.

  Another question, I stumbled on was with burned copies of the DVD, it turned out that my system DVD players, (2, one is a HP630E and the other is a typical ATAPI DVD DD internal 8 x 16), have a problem with playing movies engraved on DVD - RW discs.  Playing discs DVD-R worked well on this system.

  So in your case I try to disable the video device and let the system first use a VGA Standard, if your video plays well then check with the making of video for a updated driver device, saying "you have made any changes" does not mean that the system did not have a bad patch somewhere...

• I can't play DVDs in Windows Media Player 12 on Windows 7 Pro and get this error msg: Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection.

  Hello, thanks for reading and helping me.

  I try to play a legitimate, belonging to DVD, but Windows Media Player 12 will not play on my computer Windows 7 Professional.  The DVD worked a few days ago, but all of a sudden, I get the following error message:

  "Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD player and the video card protection decoder. Try to install a driver available for your video card.

  I did a lot of research of these forums and on the ' net.  Here are the suggested steps I tried without success:

  • I tried VLC player.  This works.  However, rather than use this workaround, I wish to find a solution to my problem WMP/WMC.
  • I tried several DVD for years over the last decade.  These DVD works on my laptop, also running Windows 7 Professional and the shark 007 codec.
  • I uninstalled my Shark 007 codec
  • I tried other codecs (K-Lite)
  • I assured that the latest drivers are installed on my video card, XFX ATI Radeon 5850
  • I tried to uninstall Nero 9
  • I tried to use the Windows 7 troubleshooting options:
  • > Reading and burning CD, DVD and Blu - ray (no problem)
  • > Windows Media Player DVD (no problem)
  • > Windows Media Player Settings (detects a problem, wants to restore factory settings, every time, no matter what happens)
  • A system restore to a time when the DVD was working did not resolve the issue
  • The different links in Microsoft, I found in this forum about this problem do not seem to be useful.  There is a link that points to the set-top boxes, but this page just says: "Windows 7 comes with a decoder.
  • I assured the latest driver is available by going to "Device Manager", right click on the drive, then click on "update driver software".
  • I assured that the latest firmware is installed directly from the manufacturer's website.
  • I tried to reset my DRM by renaming the DRM under C:\ProgramData\Microsoft\Windows folder and by going to this Web site to upgrade:http://drmlicense.one.microsoft.com/Indivsite/en/indivit.asp?force=1
  • I've uninstalled and reinstalled Windows Media Player 12 and Windows Media Center via the function "functionality in Windows.

  I would be very grateful if a Microsoft technology could chime.  Thanks for your help!

  MY COMPUTER:
  DVD drive: TSSTcorp CDDVDW SH-S203N ATA Device (Samsung)
  Driver: Microsoft 6.1.7600.16384, dated 06/21/2006
  Graphics card: XFX ATI Radeon 5850 Black
  Motherboard: Gigabyte GA-X58A-UD3R
  Processor: Intel i7-920

  -Intel i7-920, Corsair 6 GB of RAM, ATI Radeon HD 5850, Gigabyte GA-X58A-UD3R, Corsair 800 d case

  Hello

  Try this free program:

  http://www.DVDFab.com/passkey-Lite.htm

  Carlos

• Im trying to read a DVD Blue-ray in my new computer laptop and a message saying "Windows Media Player cannot play the DVD.

  Original title: how do peripheral DVD player on my laptop

  Im trying to read a DVD Blue-ray in my new computer laptop and a message saying "Windows Media Player cannot play the DVD. The disk has been created in a way that the player does not support. and also tried to solve the problems and see them all, then clicked on reading and burning CD and blu - ray discs and message saying could not identify the problem. then I went to windows media dvd player and the message saying that "Windows has no dectet a dvd playback device, if you do not have a dvd playback device, you will need to purchase and install a.. "If do not have a DVD player installed, contact your OEM or device for the latest driver for your particular device" Please can someone help me as its driving me crazy. Thank you

  You must have a third-party program to run Blu - ray discs.

  http://www.arcsoft.com/TotalMedia-Theatre/

  http://www.CyberLink.com/products/PowerDVD/overview_en_US.html?&r=1

  Your new PC must have provided with software to play. Otherwise, I'd contact the manufacturer and see if she did or why it didn't.

• Error when you try to play a DVD: Windows Media Player cannot play back the video DVD. You may need to adjust your Windows display settings. Open display settings in Control Panel, and then try to lower your screen resolution and color quality settings.

  Windows Media Player help

  I bought a netbook and have an external CD drive to dvd. When I want to play the video, I get this error.  I can't find a solution.  Any Advisor.  Error is... Windows Media Player cannot play back the video DVD. You may need to adjust your Windows display settings. Open display settings in Control Panel, and then try to lower your screen resolution and color quality settings.

  Hi Rains27,
   
  1. were you able to play the same DVD sooner?
  2. must arrive with a particular DVD or all of them?
  3. do you have a DVD decoder installed on your computer?
  4. you use starter edition of windows 7?
  5. What is the resolution on your computer?
  6. have you installed a codec on your computer?
  If you have installed a codec on your computer the I suggest you to uninstall the codec.
   
  Method 1:
  Try running Windows Media Player DVD Troubleshooter utility and check if this may help:
   
  Open the troubleshooting Windows Media Player DVD Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click
   
  Troubleshooting, click View all, and then click Windows Media Player DVD.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-DVD-Troubleshooter
   
  Method 2:
  
  
  
  Play a cd or DVD in windows Media player
  http://Windows.Microsoft.com/en-us/Windows7/play-a-CD-or-DVD-in-Windows-Media-Player
  
  Method 3:
  
  Try to reduce the hardware acceleration again and check if it makes a difference.
   
  a. open the screen resolution by clicking the Start button, Control Panel, and then, under appearance and personalization, click on adjust the screen resolution.
  b. click on advanced settings, troubleshoot tab and then click on change settings.
  c. move the hardware acceleration slider toward none to reduce or turn off video hardware acceleration.
  d. click OK and then click Restart now.

  For more information, see this link: thanks and regards:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• When I try to read Blu - Ray, it says "Windows Media Player cannot play the DVD. The disk has been created in a way that does not support the player. »

  Original title: Blu - Ray

  My computer can read blu - ray, but when I try to play one, it says "Windows Media Player cannot play the DVD. The disk has been created in a way that does not support the player. "How should I do?

  Hello
   
  The Blu - ray disc format is not supported in Windows Media Player. To play a Blu - ray Disc, you must use a non-Microsoft program that supports playback of Blu ray and a device that can play Blu ray discs.
   
  See the article mentioned below:
   
   
  Read a CD or a DVD in Windows Media Player: http://windows.microsoft.com/en-us/windows7/Play-a-CD-or-DVD-in-Windows-Media-Player
   
  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• I can't play DVD's with Windows Media Player because no compatible DVD decoder is not installed on my computer

  Original title: Windows Media Player

  I can't read the dvd with Windows Media Player... it says

  Windows Media Player cannot play this DVD because no compatible DVD decoder is not installed on your computer.

  What can I do to make it work... and I don't want to pay for another program.

  Thank you.

  Can not read the DVD in the drive Media of Windows XP
  ====================================

  Running the following command may be worth a try:

  Reach... Start / run... and type or copy / paste:

  regsvr32 jscript.dll

  Press on... Come in

  You should see the following dialog box:

  DllRegisterServer in jscript.dll successful / OK

  No luck?... read more...

  FWIW... Win XP cannot natively recognize Commercial
  DVD video... it requires a DVD decoder.

  If you could play before commercial video DVD...
  do a system restore to a time before this started
  may be your solution.

  (306084) how to restore Windows XP to a
  previous state
  http://support.Microsoft.com/?kbid=306084

  Or you could buy a DVD decoder at the following link:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  (948247) how to set a system restore
  point in Windows XP
  http://support.Microsoft.com/kb/948247

  Info about DVD decoders:
  Plug-ins for Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player/plug-ins

  Or you can download and use one of the following
  freeware multimedia players:

  VLC Media Player
  http://www.filehippo.com/download_vlc/
  (works on XP/Vista/7)
  (name of the file to download: vlc - 2.0.1 - win32.exe)

  Media Player Classic Home Cinema
  http://MajorGeeks.com/Media_Player_Classic_Home_Cinema_d6213.html
  (works on XP/Vista/7)
  (name of the file to download: MPC - HomeCinema.1.6.1.4235.x 86 .exe)

  Or... you can try to download and install the
  Following Codec Pack.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  * Proceed at your own risk *.

  K - Lite Codec Pack (full)
  http://www.filehippo.com/download_klite_codec_pack/
  (Win XP / Vista / Win 7-32 bit and 64 bit)

  Good luck...

• Windows Media Player doesn't recognize DVD

  Windows Media Player will recognize is more DVD - it opens with a black screen and then stops. However, it will play CDs and videos from internet and attached to e-mail. It will also burn videos to DVD. All the drivers are up to date. What is the solution?

  Hi tomkucharski,

  -What version of Windows Media Player is installed on your computer?

  -What software changes you did on the computer before the show?

  -The problem occurs with every DVD or a specific DVD?

  Follow these steps:

  Method 1:

  Run automated troubleshooting who diagnose and fix problems with your CD or DVD drive when trying to read or burn media automatically.

  See your CD or DVD drive cannot read or write media

  Method 2:

   

  You should maybe download and install plug-ins for Windows Media Player (WMP).

  See the Plug-ins for Windows Media Player.

  Read CDs and DVDs

  See also:

  File Readme for Windows Media Player 11 for Windows XP

• Windows Media Player 12 plays not DVD

  Hello, I have a new Windows 7 Ultimate, 64-bit system, running on a Gigabyte motherboard / Intel Core i7 920, built in the last days. I try to read commercial standard DVDs (e.g. Titanic) on the drive to DVD Samsung through a high-end Nvidia 1 GB graphic card, through Windows Media Player Version 12.0.7600.16415.

  NOTE: VLC Player works fully, showing that the material (audio / video) is properly installed.

  When you use the media player in Windows 7, I received the message "Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection. Try to install a driver available for your video card. The options are 'Close' or 'Web Help', where the latter gave no information.

  This situation occurs through the display of several DVD media are OK.

  I downloaded a lot of codecs on the Net, ending up with very pixelated video and distorted sound under Windows 7 Media Player.

  I have now uninstalled these Codecs and VLC Player still works AOK.

  Where are you offering me I have Windows 7, 64-bit codecs, Windows Media Player Version 12.0.7600.16415 player?

  Hello

  This error "Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection. Try to install a driver available for your video card"is normally related to the video driver being unsigned. If your driver is not signed, you will not be able to play protected content, including DVDs.

  Try to install the latest video driver and see if the problem persists.

  Thank you
  Archana