Windows Media Player to research Black

Similar Questions

• Full screen is black when you use windows media player series Equium

  Hello.

  When I watch TV on the windows media player so I have the problem. If I go to full screen, it's all black screen but I can hear sounds.
  Watch DVD is OK.

  I have my laptop for 4 months, but everything was ok.
  This problem started 2 days ago maybe earlier. I think I did something but I don't know what and I can't fix it.

  I did restore the BONE, but it did not help.

  Could you help me please?

  Thank you

  Hello

  I know this problem, it s just a bug with media player and the graphics drivers (mainly the media player causes the error it s). Please, if you want to watch something on TV and then playback must be STOPPED BEFORE you from the screen. Once you have changed the screen, enable playback and it should work.

  Otherwise, go on www.videolan.org website, download the latest version of VLC Player and do it with him, it should work for sure. I never start playback of a movie or something when the screen not changed front on television that the screen alone.

  Welcome them

• Windows Media Player play about half of the clip, then the picture cuts off, the screen goes black, but audio continues to play.

  Windows Media Player play about half of the clip, then the picture cuts off, the screen goes black, but audio continues to play.  Just reinstalled MP 11, same problem.

  Hello

  · What is the number and the model of the computer?

  · This occurs when you are working on any specific file format?

  · Were there any changes made on the computer?

  · You play the file in mode full screen?

  Change hardware acceleration

  a. you can try to change the hardware acceleration in the middle and check (you can try another level too.)

  b. right-click on a space empty on the desktop.

  c. go to the resolution of the screen.

  d. click Advanced settings, and then click the "troubleshooting."

  e. set hardware acceleration in the middle. (Here you'll get the only option your video card sound support).

  You can also check: you receive an error message of codec or audio plays video but does not play when you play media files in Windows Media Player 11: http://support.microsoft.com/kb/926373

• Windows media player does not detect the black cd in d drive to burn some music?

  I am burning music from my library on a black cd on drive D.I had a ready to burn playlist, I incert black drive up there, where he said burn cd now it says cd, incert black, but I have aready done itself do not know why I can start to "burn?

  Hi natesalgado,

  1. did you of recent changes on the computer?

  2 when was the last time you were able to burn audio CDs with Windows media player?

  3. you have any third-party DVD burning software installed on the computer?

  See the Microsoft articles below and check if it helps.

  How to troubleshoot problems that occur when you copy data on a CD - R or CD - RW optical disc in Windows XP

  http://support.Microsoft.com/kb/324129

  How to troubleshoot Audio CD creation in Windows Media for Windows XP player

  http://support.Microsoft.com/kb/306319

• Videos with a resolution of portrait (1280 x 720) play with a black screen, audio is heard, in Windows Media Player 12 on Windows 7

  Hello

  I noticed that the video playback for videos (with a resolution of portrait, specifically 720 x 1280, appear black with audio being heard in Windows Media Player 12 (WMP 12) on Windows 7.  A Playbook has been used to capture video to the resolution of portrait.  I also noticed that if the Playbook capture resolution 1280 x 720 of the landscape, the video plays fine in WMP 12, so I know it is not a Codec problem and seems to be related to the dimensions of the video picture.

  The same portrait videos can be read normally with VLC and other video player applications.  Is this a known problem or limitation with WMP 12 on Windows 7?

  Thank you

  RS

  P.S. as an aside, Playbook captures video in MPEG-4 AVC video Codec and Audio MPEG-1 layer 2 Audio Codec format.

  Hello Rami,

  Thanks for posting your question in the Microsoft community.

  I understand that whenever you play a video (720 x 1280) Portrait format, it shows a black screen.

  To resolve this problem, we need to do some diagnosis so I would say that you check out the link and follow the steps.

  Open the troubleshooting Windows Media Player settings Troubleshooter
  
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Let us know if the store reports errors.

• Why the upstairs and downstairs bars when in full screen are not black in windows media player?

  When I go to watch a movie on Windows Media Player and go to full screen, the upstairs and downstairs bars are supposed to be black. Mine are blue, how to change it back to black?

  When I go to watch a movie on Windows Media Player and go to full screen, the upstairs and downstairs bars are supposed to be black. Mine are blue, how to change it back to black?

  Open WMP12 > Tools - Options - Performance - DVD and reading video-video border-change of color [to Black] - OK
  

• I get a black screen when I play videos in Windows Media Player and Windows Media Center.

  Until recently, all worked well for a long time. Now when you try to watch live TV or a DVD, I get a black screen with sound in Windows Media Center and trying to watch a DVD in Windows Media Player I also get a black screen with sound. The controls are there and functioning normally. DVDs are normally visible in the K-Lite Media Player Classic.

  I have Windows 7 Ultimate 64-bit, a tuner TV of SiliconDust HD Homerun networked and a videocard ATI Radeon 4550. I have all the latest updates.

  I found and tried many recommendations of the Internet for problems like this, and none helped.

  The video card driver is the latest provided by ATI to Microsoft for Windows Update and is dated from 19/04/2011. I tried to install the latest Catalyst software and driver from the ATI site, which does nothing to help, and then uninstalled. These drivers provide no option to adjust the hardware acceleration.

  I had an older version of K-Lite codec package installed. The problem does not change if I have the old version, the last 32 + 64 bit version or no version installed.

  In Control Panel, I tried to disable Windows 7 media, reset their reactivation components and reboot again. There is nothing.

  I had an older version of installed package from Cyberlink. The problem remains the same if I have the old version, the version the most recent or any installed.

  I tried to uninstall all Apple software: QuickTime, iTunes, etc. There is nothing to help.

  I tried to create a new user account; same problem there.

  I have VMware and a virtual machine that is running 64-bit Windows 7 Professional. In this machine, I can view DVD normally with Windows Media Player, using the same physical DVD drive. I don't have Media Center set up in this machine.

  Title photo: original No. in Media Center and Media Player

  The problem is now resolved. I removed the software installed probably because the problem started, and Cisco Webex, which I did not need, was probably the culprit, although I'm not 100% sure.

  Thanks to those who have tried to help.

• Why my windows media player supported titles songs or the album used info when I rip. PS, I put Black Sabbath he told me that I was ripping G n R.

  Windows media player does not apply any album or song info when I rip Yes my CD, as it's on the Internet

  Hi dougxz,

  ·         Did you do changes on the computer before the show?

  Follow the steps in the article.

  Resources for the resolution of problems in Windows Media Player

• I can't play DVDs in Windows Media Player 12 on Windows 7 Pro and get this error msg: Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection.

  Hello, thanks for reading and helping me.

  I try to play a legitimate, belonging to DVD, but Windows Media Player 12 will not play on my computer Windows 7 Professional.  The DVD worked a few days ago, but all of a sudden, I get the following error message:

  "Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD player and the video card protection decoder. Try to install a driver available for your video card.

  I did a lot of research of these forums and on the ' net.  Here are the suggested steps I tried without success:

  • I tried VLC player.  This works.  However, rather than use this workaround, I wish to find a solution to my problem WMP/WMC.
  • I tried several DVD for years over the last decade.  These DVD works on my laptop, also running Windows 7 Professional and the shark 007 codec.
  • I uninstalled my Shark 007 codec
  • I tried other codecs (K-Lite)
  • I assured that the latest drivers are installed on my video card, XFX ATI Radeon 5850
  • I tried to uninstall Nero 9
  • I tried to use the Windows 7 troubleshooting options:
  • > Reading and burning CD, DVD and Blu - ray (no problem)
  • > Windows Media Player DVD (no problem)
  • > Windows Media Player Settings (detects a problem, wants to restore factory settings, every time, no matter what happens)
  • A system restore to a time when the DVD was working did not resolve the issue
  • The different links in Microsoft, I found in this forum about this problem do not seem to be useful.  There is a link that points to the set-top boxes, but this page just says: "Windows 7 comes with a decoder.
  • I assured the latest driver is available by going to "Device Manager", right click on the drive, then click on "update driver software".
  • I assured that the latest firmware is installed directly from the manufacturer's website.
  • I tried to reset my DRM by renaming the DRM under C:\ProgramData\Microsoft\Windows folder and by going to this Web site to upgrade:http://drmlicense.one.microsoft.com/Indivsite/en/indivit.asp?force=1
  • I've uninstalled and reinstalled Windows Media Player 12 and Windows Media Center via the function "functionality in Windows.

  I would be very grateful if a Microsoft technology could chime.  Thanks for your help!

  MY COMPUTER:
  DVD drive: TSSTcorp CDDVDW SH-S203N ATA Device (Samsung)
  Driver: Microsoft 6.1.7600.16384, dated 06/21/2006
  Graphics card: XFX ATI Radeon 5850 Black
  Motherboard: Gigabyte GA-X58A-UD3R
  Processor: Intel i7-920

  -Intel i7-920, Corsair 6 GB of RAM, ATI Radeon HD 5850, Gigabyte GA-X58A-UD3R, Corsair 800 d case

  Hello

  Try this free program:

  http://www.DVDFab.com/passkey-Lite.htm

  Carlos

• Open Firefox Windows Media Player for video files

  I need to make Firefox to open the actual Windows Media Player application (not a plugin, the window real app) when clicking on video links, for example, WMV. These file types are already associated in Windows Explorer with WMPlayer, but this has no effect on Firefox.

  What happens now is that, after you have clicked on a video, I get a screen black with yellow icon of VLC Player (VideoLAN VLC installed on my PC) in the Center and no video. I don't want to launch VLC or internal plug-ins.

  You can change the type of application opens for each kind of type in Firefox options.

  • 

    > Options > Applications > (example) SWF file > select everything on the right side (e.g. use of ShockWave Flash for Firefox > Set another use, find Windows Media Player)

• Windows Media Player does not not in Firefox 7

  This applies to a beta version of Internet radio page at http://www.radiofreeneptune.com/ with the Windows Media Player embedded in the page.

  Before Forefox 7, navigation on the page with Firefox had the correct media player interface (black, with blue buttons) appear as soon as the page loaded. Clicking Play caused the music played.

  After having updated for Firefox 7, Firefox works for about a minute when the page is first accessed (it seems to be buffering a lot of audio). Finally a gross Media Player interface appears. Audio begins to play immediately, even if the control incorporated there AutoStart set to false.

  FireFox has the Microsoft Windows Media Player for Firefox 1.0.0.8 installed.

  Any idea of what this could be the cause?

  Thank you.

  Jack

  Try to delete the old plugin in WMP (Npdsplay dll in the plugins list) that is used.

  The embed for Firefox autostart a = '1' not not autostart = false (0) as the object for IE.

• There seems to be a problem with Windows Media Player

  Windows Media Center does not work correctly. The screen turns off, and I can't go out there, just put on tab Whats going on?

  Hi ElizaMalerba,

  ·         What operating system is installed on your computer?

  ·         What is the problem you're facing Windows Media Player?

  ·         You receive an error message?

  You can also see the article in the Microsoft Knowledge Base and check if it helps

  When you switch from Windows Media Center by using Alt + Tab, or you switch between windows and a magnified view, Windows Media Center displays a black screen, or you receive the error message "cannot play video".

  http://support.Microsoft.com/kb/950112

  Please respond with more information about the issue so that we can help you in a better way.

• windows media player control in labview

  Hello

  I'm having trouble controlling a WMP in LabVIEW using ActiveX controls is... What I have to do is to have a control to go from image to image. I did something, but when I slide the crontroller, it suddenly crashes?

  Also: when I play the video in windows media player from mij, it opens normally, but when I open it in the labview activex control, the screen remains black? I have a compressed H.264 AVI file and I have installed the latest codec pack k - lite.

  I use a Node (activeX) property to adjust orders "IWMPPlayer4"-online "orders"-> IWMPControls-online 'common position '.

  Anyone have experience with this?

  Best regards

  Thijs Boeree

  
  

• Open a URL in Windows Media Player

  Is there a chance to open a url directly from youtube in windows media player?

  Let's go into the details.

  I have the old Matrox rt.x100 video card (full screen on an external monitor only with windows media player + live show video plugin), so if I want to open a livestream of youtube video and play on external monitor through the Matrox card I need wmp.

  Beacause it, is there any chance and the possibility of open url directly in Windows Media Player?

  Any help would be appreciated.

  Thanks in advance,

  Stefan

  I don't disagree that VLC can, but it's obviously research any HTML content on the page, to jump beyond all the toolbars, comments, announcements, links and... then find the video, determine the FLV or a video that is wrapped in the HTML5 or Flash wrapper, then play the open content.

  This will never come to WMP.

• Why is there no media sharing tab in my windows media player Library tab

  When I select the Library tab, it there is no media sharing tab and when I go to the library options tab confi.sharing is black gray not why is this and how to fix this

  Hello

  Click Start, in run type services.msc, and then press ENTER. Check whether the Windows Media Player Network Sharing service is activated. Also, try to disable the firewall temporarily and check.

  Good luck..!