HP 6500 E709a network main AIO: printer Ethernet cable to the router

Similar Questions

• connection for printing from a computer wireless with a connection cable to the router usb printer?

  Produst name: HP Officejet Pro L7555.

  Works with Windows 7.

  A new router and the modem was installed when Comcast installed our wireless connection.  This of course did not work with the current setting of the printer.  The printer is connected via USB cable to the router.

  Are you sure it's a USB and not an Ethernet cable?  I bet it's in the affirmative:

  1. disconnect the Ethernet cable.

  2. on the printer: Setup > network > default settings.

  3 reconnect the Ethernet.

  Now, remove the printer in Control Panel > devices & printers, then add it again like this:

  1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing. Get his IP address for a network Test printed on the front of the printer.
  2. click on > start > Control Panel > devices & Printers.
  3. click on add a printer
  4. Select local printer
  5. Select create a new port and select Standard TCP/IP Port, and click Next.
  6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the IP address of the printer. Click Next.
  7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
  If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
  8. If prompted, use the driver that is currently installed.
  9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
  10. we may ask you to share the printer. Choose No.
  11. the printing area of Test Page is displayed. Go ahead and print it out.
  12. click on finish.

• My HP Photosmart C309a printer can't find the router wireless 3 feet above him.

  My HP Photosmart C309a printer can't find the router wireless 3 feet above him.  I ran the diagnostics and got the message "the wireless radio does not work.  This device is the wireless radio?  In the router? In the printer?  I have reset the router is #6 with the printer, but I am still unable to connect my Macbook to the printer wirelessly.  My desktop Mac is connected to the printer with a cable and print well.  Is my router messed or my printer?

  Wireless radio of your printer (that it uses to communicate with the router radio) died.  Here's how to contact HP technical support: www.hp.com/go/totalcare

• "User intervention required" network OfficeJet 6500 E709a on Windows 8 print

  I have an OfficeJet 6500 all-in-in-one E709a connected to my router wireless via an ethernet cable. 2 computers (Win XP and Windows 8 64 bit) connected wireless to this network. The Win XP computer can print without problem, but the Win 8 computer print jobs in queue and says "User interaction" required

  A few notes:

  * It seems that Windows already installed drivers for this printer. It is available in the window "Devices and printers", having the status of "user Intervention."

  * I don't want to install the complete software if I can avoid it

  * I checked that the printer is NOT in offline mode / pause

  * I tried stop the spooler service, delete the temporary files, and then restarting the spooler, as suggested, on a MS windows forum

  * Windows 8 is a new computer; It has never worked before

  * I tried to restart the printer, but that did not help. Windows detects when it it turned off and rebooted, but when it is restarted it goes straight to mode "user Intervention."

  * The software HP to select the "good" pilot says that it cannot find the drivers for my printer

  * HP does not seem to offer a download drivers only for my combination printer/Win 8

  Help, please.

  Thank you

  Skinny, looks to have a configuration issue with the printer. What we will do is to uninstall the printer completely and reinstall following in my footsteps. This will give use a shift even to work from.

  
  First of all, if you use a USB cable, be sure to remove it (it's important). Do not plug it in again until the software instructs you. Through devices and printers, programs and features and issues Device Manager and make sure that all copies, files, and programs related to the printer are removed. As indicated, and then restart the computer.

• HP OfficeJet 6500 (E709a) network problems

  Hello. I have a new HP OfficeJet 6500 (E709a) its all in one. I'm trying to use it through a network at home.

  He was already working for 1 computer, a laptop wireless, BUT not for me, an ethernet wired desktop.

  PC: Windows 7 64-bit

  Laptop: Windos Vista (not sure if 32 or 64) using printer wireless successfully.

  Well, the problem is when you try to scan from the printer or computer does not detect the other BUT I can print from my pc to the printer.

  I installed it via PC add a printer because whenever I tried with the program downloaded from HP, it does not, NEVER detect my printer connected and already tested. I can access the Web page printers, the 0.0.0.0.0 something page. I even tried the Advanced installation method, manually type the address of the printer has, but it still wouldn't work.

  I installed by selecting everything I would like to wire my printer later but to continue the installation, I have to find a way so that it can detect my pc or the otherway autour.

  Yes, connect the printer to your router with an Ethernet cable run it the device to add in the Hewlett-Packard folder (start > all programs).

• Network charges (7310) printer to 100%, then the error message: "the printer is not responding" - help!

  Hello

  until yesterday (with the new driver), everything was fine. Now the printer (Officejet 7310) print no more when it is connected to the network (ethernet or USB (to the router). The printer will print directly connected via USB to my MacBookPro, also when connect to my iMac.

  Tried everything, deleted and added to the printer (green light), restarted the pc, printer etc. Cannot read the extra level, utility HP does not get data to the printer.

  Everyone is any hint?

  Thank you very much!

  Efi5

  Hi Efi5,

  Make sure the printer connected to your router by Ethernet.

  Unplug the router for 30 seconds, plug back in and try printing again.

  If it persists, try resetting the following printing system and check if this may help you:

  * Be aware that reset the printer system will eliminate any existing queue and reset all custom settings driver.

  Click on the Apple menu and then click on System Preferences.
  Select Print & Scan.
  Right click (or Ctrl + click) your product with the Printers list in the left panel and then click on reset printing system.
  Click OK to confirm the reset.
  Type your user name and password.
  Click OK. The printing system resets.

  Now add the printer by clicking on the sign more.

  Kind regards

  Shlomi

• can I connect my hp cp1518ni network without using a ethernet cable?

  Can I connect wireless, or I have to use an ethernet cable?

  Hello

  Based on this, your printer is not ready to network, it uses the USB port so adding component (wired or wireless) network may cost more to buy a new printer. A cheaper option is to purchase a wireless as one of theseprint server.

  Kind regards.

• OfficeJet 7410 driver for Windows 10 can't find my printer (Ethernet) cable during installation

  I have exactly the same problem.  I can not connect via a wired or wireless connection in Windows 10.

  The printer is on the network.  The HP Home Diagnostic Utility Network and HP print and Scan doctor can find the printer, why doesn't the installer?

  I tried to install Win 8.1 software, but it's the same beam, so I had the same problem.  An older version might work, but it seems that you cannot access old drivers on the HP website.

  I wouldn't mind so much if there was a way to install a scanner driver and I could scan with another application, but I can't find a scanner driver and the "Imaging Software" component on the installation program (I think that's what it was called) does not seem to install the driver, or at least does not have the available scanner.  I can scan via the web page printer, but that gives only very few options.

  I had any other problems with the software of HP driver for this product on the day 1, almost 14 years ago.  The works still printer, it's just the software that supports this is hogwash.

  HP, FIX YOUR PRODUCT.

  Hello

  Download and install the software and check for the following difference:

  http://ftp.HP.com/pub/softlib/software13/COL30951/MP-110165-3/AIO_CDB_Net_Full_Win_WW_140_408-5.exe

  Please let me know the results,

  Shlomi

• How to map the network folder or printer driver automatically on the PC field when first time login

  Hello

  I'm looking for the procedure map the network folder or a printer driver automatically on the PC field when the first connection via Active Directory.

  I have already created batch files for installing the driver mapping and network printers, but I do not know how to apply to all users in the domain.

  I use Windows server 2012 R2 and client PCs running Windows 7 and 8.

  Please give me some advice.

  Thank you

  Hi Avocado,

  According to the description, your computer is connected to a domain network that includes various policies that govern your system and can affect the basic operation of a stand-alone system. So, I suggest you to post your query on the TechNet forum for best expertise on this issue.

  All the best!

• Want 5660: Printer cannot connect to the router

  All of a sudden the printer can no longer connect wireless to the router. Printer router ok may be defective

  Please provide the following information if anyone can help including:

  The printer model - done

  Operating system of the computer-

  Detailed - description of problem including all devices network (extensor, switches)

  Connection method - Direct wireless, wireless, wired LAN, USB? -

  Number of brand and model of router and modem? -

  Error messages - on the screen of the printer or computer, no matter what flashing light patterns? –

  The printer is connected directly to the wall outlet?  If this isn't the case, please explain how the power is connected.

  Do you think the printer is going to sleep and can't wake up? -

  If wireless, in the event of problem, what is the status of the blue wireless light on the printer, active, disabled or flashing? –

  Power off the printer and the router.  Power on the router and wait 3 minutes, power on the printer.  It connects to the router now?  What is the IP address of printers?

• 6500 a more used to printing on paper of the greeting card

  I have a 6500 a more who will not print on paper greeting card greeting card, but it will be printed on thinner paper for typing. It starts printing and stops to say paper is of a good size. I guess it's to measure the thickness. This problem started just as she had worked perfectly before I tried to print a picture of my camera card.

  I'll send you a PM with additional instructions, follow this guide and let me know how it goes!

• My laptop is connected to local and internet when I use the wired ethernet connection to the router. I can't connect to the network this same router wirelessly.

  Hello

  What information is needed? I surfed autour reason no specific error I get when I try to diagnose and changed the flag broadcasting by the procedure step by step provided by microsoft. This has not solved the problem.

  Go to the website of the manufacturer of your router > make sure you have the latest Firmware in Vista for it.

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

  Try without commitment TCP/IPv6:

  If you still have internet connection probs, one thing to try is the separation of the TCP/IPv6 (which is done by going to network connection > right click > properties > it uncheck > OK.)

  http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

  See you soon.

  Mick Murphy - Microsoft partner

• OfficeJet 6500 E709N series ~ can't print wireless...

  TRIED EVERYTHING ~

  That is: we have a Mac running OSx 10.5.7 and PC with Windows XP and a laptop with windows XP. Our wireless router is a wireless 3 G of Lnksis.

  I bought the HPOJ 6500 e709n yesterday and adjusting upward all night.  Tried it on mac.

  In the first way, I had everything hooked up. Ethernet cable to the router and usb to the printer. Implementation through all phases including Telec. Has been able to print correctly. I was never invited to disconnect the cables but instructions included state you need to test the wireless connection. I did and the printer did nothing. I reconnected the cable and was able to print what was in the QC. However not wireless I tried this several times.

  Sense leads me to test the firewall rules and check out them. I added rules for UDP and TCP allow everyone from the URL given in the network config page I printed from the printer. I also added the mac address to the list of connected devices permits that I added as well access control. I tested several times and also added the printer using the url. After that I did everything that allows all ports to connect could afford to display supply levels for the ink and even print reports of wireless through the Manager printer diagnosis but cannot print documents... WEIRD.

  I loaded each time with the right driver and did everything I can to enable on all ports. The only thing I can think of at this point is that we have a house system that apparently is running on here that I do not give. It really has nothing to do with it, but I changed the URL to begin to manage to 0.100 + that the rep wanted 1-100 used by system here for we are conducting to 192.168. 0,101...

  What should I do?

  OK, there may be something else going on, but try this:

  Remove the Ethernet and USB cables

  Make sure that the radio is on (perhaps not hard to restart the router and printer, too)

  Delete and add the printer on the default tab - one marked with Hello

  Restart the computer and try to print.

• Problems connecting an Officejet 7310, wireless and ethernet cable

  My printer (Officejet 7310) is connected to two PCs with an ethernet cable and the router. Now I want to install a laptop as well.

  I know that the lap top is communicating with the wireless router, but I can't get the laptop to recognize that there is a printer is installed.

  I tried to connect the printer directly (via Ethernet cable) to the laptop and it works fine. I downloaded the latest version of the software for the 7310 and used two options (without wire and cable).

  Any help would be most appreciated.

  Cutting the anti-virus made no difference.

  I HEALED NOW THE PROBLEM!

  Installed a new router 2wire.

  Thanks a lot for your help.

• My HP 6500 E709A will not print in black.

  My HP Officejet 6500 E709A Series does not print in black. I have put in a new cartridge, made all of the recommended tests, even reset when you unplug the unit for 20 seconds then hold # and 3 and plug it in but it didn't work. Help!

  Unfortunately, all do not have to be fixed, because the black print head w as worn, so I had to get a new one. At least they are cheaper now!