Windows not recognizing generic php do not monitor invidia

Similar Questions

• Windows not recognizing the Trend Micro firewall.

  My Windows Firewall status is "not monitored". My Trend Micro firewall is enabled. Recently I changed the State of my Windows Firewall from "Off" to "Not monitored" so I would not get a Windows security alert noting that my firewall is disabled. My question: Trend Micro says that Windows recognizes the Trend Micro firewall that is on and then start to monitor, rather than its own firewall. Why Windows not recognize is not the firewall of Trend Micro and so not monitoring in the Windows Security Center? (Yes, I'm 100% sure that my Trend Micro firewall is running, I even went through the process of uninstalling, then put it back in order to ensure with the trend on the live chat)

  Also try to update your Windows and install the latest service pack and update of trend, if the problem has NOT resolved trend contact technical support or visit their support site

• my Iphone is only detected by Windows, not Itunes more

  Hello
  I have the problem, it was presented after that I stopped and restarted the Apple Mobile Device service...
  I'm on Windows XP

  I did this operation because my Iphone 4 was not detected by windows, but only by Itunes,
  and given that this message is popping up (several times in a short period of time) the opposite happening, my Iphone is only detected by Windows, not Itunes more...

  My antivirus occurs Kaspersky Pure, no malware or virus... I scanned my computer and corrected the registry problems using RegCure which was supposed to fix this error (0xc06d007e), but I still get the error message no matter what...

  If you have a solution or advice, I would be very grateful,
  Thank you

  Hi manuelfrulio,
   
  Follow the suggestion given in this link to fix the issue:
  iOS: device not recognized in iTunes for Windows
   

  If this is not enough, you may need to contact Apple Support Forums for assistance.

• Windows Activation Technologies - Windows not genuine

  I run Windows 7 Home Premium SP1 on a desktop HP refurbed for over a year.  And now, as everyone (or what it seems), I get the pop-up Windows not genuine mandatory.  He started just as I was leaving for a trip of 6 days; I fired, but if have pop-ups.

  According to the update history:

  KB3004394 has "successfully" installed on 10/12/14

  KB3024777 has "successfully" installed on 12-12-14 (I left early this morning, back last night)

  KB3004394 or KB3024777 appears in the updates installed (as I believe Microsoft intended)

  Windows system proclaims "Windows is activated".

  Here are the results of Diagnostics...

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0
  Code of Validation caching online: 0x0
  Windows product key: *-* - 73CQT - WMF7J-3Q6C9
  Windows product key hash: RmurcM3ZxzWyfEP9WtPUJw = + KaFG
  Windows product ID: 00359-OEM-8992687-00010
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7601.2.00010300.1.0.003
  ID: {13D2793C-906F-4F0E-AD7D-A36484CC0239} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.140303 - 2144
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {13D2793C-906F-4F0E-AD7D-A36484CC0239}1.9.0027.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-3Q6C900359-OEM-8992687-000102S-1-5-21-2797114105-896338279-1757718200Hewlett-PackardRfrb h8 - 1360 tFRIEND7.1520120702000000.000000 + 000656D3C07018400FE04090409Eastern Standard Time(GMT-05:00)03HPQOEMSLIC-CPC109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00178-926-800010-02-1033-7601.0000-0422011
  Installation ID: 007376661122184883014732143133825656587584275092559350
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: 3Q6C9
  License status: licensed
  Remaining Windows rearm count: 1
  Trust time: 18/12/2014-10:23:05

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0x00000000
  Beyond: 0 x 0000000000000000
  Event timestamp: 12:11:2014 20:07
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current HWID of Hash: LAAAAAEAAQABAAEAAAACAAAAAQABAAEAln02KUYy2HJSNoqfYj00NFBalmM =

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  HPQOEM APIC-SLIC-CPC
  FACP SLIC-CPC HPQOEM
  DBGP SLIC-CPC HPQOEM
  HPET SLIC-CPC HPQOEM
  MCFG SLIC-CPC HPQOEM
  FPDT SLIC-CPC HPQOEM
  SLIC SLIC-CPC HPQOEM
  SSDT HPQOEM SLIC-CPC
  SSDT HPQOEM SLIC-CPC
  SSDT HPQOEM SLIC-CPC
  LAURENCE HPQOEM SLIC-CPC

  Any help is greatly appreciated!

  Mark

  Select Start, all programs, accessories, right-click right-click command promptand click run as administrator on the menu drop-down... Type cd\ and press ENTER. Type "chkdsk c:/r" without the quotes and press ENTER. Make sure you include the spaces indicated. Enter it when asked if you want to run chkdsk on restart the computer. Type exit, press ENTER, and then restart the computer.

  Please run the SFC system and say if she cannot fix corrupted files: http://support.microsoft.com/kb/929833

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode.

  Please download and share with everyone your event to your OneDrive Viewer Application copies of your System and logs and post a link here.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do the same for the application log. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

  General remarks on event viewer
  http://www.gerryscomputertips.co.UK/syserrors5.htm

• How to set up multiple home pages to open in a separate window (not a tab) when you want...

  I would like to install and be able to click on a profile of Firefox (I guess that the profile) or pass parameters to the firefox.exe and Open firefox about 6 separate windows (not tabs) on different home pages.

  If I use the vertical bar in the Options, it will open separate tabs but also cause the problem below that I also want to solve.

  Many times, I would also like to run another instance of firefox by clicking on the Firefox icon in my Quick Launch bar and DO NOT want all these sites open again.

  How is this best achieved?
  In the past I just opened each site individually in its own window.

  Thank you very much
  Peter

  You can create several shortcuts on the desktop and include the URL on the command line and use the - new-window switch to specify a new window.
  
  You must use the - new-window switch for each URL (window - new - window-new-URL1 URL2).
  
  If the command line gets to long then you must use a CMD file to store the command line complete (start "" firefox.exe - new-window etc.).

  • https://developer.Mozilla.org/en/Command_Line_Options

• 14-b049tu sleekbook: Windows not can find new updates

  Windows not can find new updates

  Hello

  try to run that Windows update convenience store

  any link is given below:

  Troubleshooting of Windows Update

• Why windows not a lot of malware that compare to other OS?

  Why windows not a lot of malware that compare to other OS?

  Windows not "having a lot of malware.

  It is the same for any other OS.

  Most often, the biggest problem is the user himself who carelessly clicks everything what is clickable and who does not pay attention to uncheck "grouped" offers downloading something...

  How to avoid infections PC easily

  Where my PC infected?

  Best practices for computer security - malware Infection prevention

• System Center Operations Manager 2007 R2 - all agents show not monitored

  I finished installed System Operations Manager 2007 R2 with all components.  Agents of the customer which was discovered show not monitored in the administration server.

  Hi Michel,.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Hope this information helps.

• had this message for the 1st time on windows, not sure if its real? performancewreckcontrol.in

  had this message for the 1st time on windows, not sure if its real?

  Hi Netbook,

  This isn't enough information.  What is the exact message and any word to Word with all the codes?  How it was received (a pop-up, aredirect, an e-mail (if so, what he want/say - leaving out personal information about you)?)  What were you doing when it was received?  Do you know what program sent you him?  What operating system?  What browser and version?  What security programs (names and versions of all of them?  The message say?  When it seemed (start-up or during work)?

  Here's help on how to respond to that and other information necessary to understand: http://support.microsoft.com/kb/555375.

  In the meantime, I would do anything he asked and guess that it's a scam, spam, malware and/or until we prove otherwise based on your comments.

  Thank you!

  Kosh

• Windows not loading after system reboot after installation of the last security update.

  Windows not loading after system reboot after installation of the last security update. Have you tried last known good Configuration, Safe Mode, neither of her works.

  No matter which option to choose, it comes to me to the BIOS boot screen after 5 seconds in loading Windows.

  Running Windows Vista 32 - Bit with SP2 installed system. 2 GB OF RAM. Intel G31 Mobo.

  Dated this February 11, 2010.

  I managed to restore my Windows to previous restore point, using the CD of Vista to start, and then select repair Windows. I hope this helps.

• Get "DDE server window not responding do not" message when computer shutdown

  Tell me why when shut down my PC , I got a "DDE SERVER WINDOW NOT RESPONDING... END message NOW? ' I've never had before, and the only way I could stop my PC was to finish the task.
  I am running Windows XP SP3
  Thank you!

  I uninstalled a program called iLike Sidebar & it seems that the DDE server window does not come up during a re-start and or close. I think it was the cause of it occurring first, because now that I remember I never had it happen before you install the Sidebar iLke. I think it was the cause of the problem, and am keeping an eye on, just in case it happens again. I hope I'm right about my prognosis.

  I thank all those who responded to this question, I had, & if he come again I will adhere to all the suggestions that everyone else does.

  Thank you!!

• Can I hide or change the print window not pop up when printing?

  Original title: hide or print shown window?

  Can I hide or change the print window not pop up when printing? I want to still print but just to hide so it does not appear.
  Is it still possible?
  Thanks for all help

  Hi rustylzard,

  It is not possible to hide or change the print window when you try to print something.

  Hope the helps of information.

• Windows not can find new updates (code 80004002)

  original title: Windows not can find new updates

  on the windows updates, I get a message that says "windows has not can find new updates a mistake due to the new updates for your computer errors found: code 80004002 Windows Update incountered a unknown error.» I can't seem to find a solution for this, pls help

  Hello

  Please follow the steps below.

  Method 1:

  Run the Microsoft fixit from the link below.

  The problem with Microsoft Windows Update is not working

  http://support.Microsoft.com/mats/windows_update/

  Method 2:

  Follow the steps from the link below.

  Error message when you try to install updates by using Microsoft Update or Windows Update Web site: «0 x 80004002»

  http://support.Microsoft.com/kb/956708

• Not Microsoft Windows - bar tasks or the Start button "register Microsoft windows not updated, (he is) Microsoft Windows has stopped working".

  On the computer startup, there is no button or the start task bar.  window appears reading: "Registry Microsoft windows not updated, (he is) Microsoft Windows has stopped working."  I could get on the internet, but I have a blank desktop!  What should I do?  Re-stall the disc?  I have a tower HP w / Vista bought in 2008.  THX, Lizz

  Hello

  1. have you made changes on the computer recently?

  Method 1.
  Let us scan SFC and check that it prevents this error to occur.
  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file.
  To do this, follow these steps:
  a. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  b. type the following command and press ENTER:
  sfc/scannow
  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
   
  More information on SFC scan found in this document:
  http://support.Microsoft.com/kb/929833
  
  Method 2.
  a. also, you can try again user account if the problem is resolved.
  Create a user account
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account
   
  b. If the problem does not occur in the new account user set your user account damaged. The steps to fix the corrupt user account are given below.
  Fix a corrupted user profile.
  http://Windows.Microsoft.com/en-in/Windows-Vista/fix-a-corrupted-user-profile
   
   
  Let us know if that helps.

• Windows not genuine message on my desktop

  Original title: Windows not genuine

  I got this computer since November 2009.  It came with Windows 7 Home Office preinstalled.  I paid $89.00 for a Windows upgrade Express upgrade to Windows 7 Premium.  All of a sudden, 03/13/11, it popped up on the lower right of my screen:
  Windows 7 Build 7601 - this copy of Windows is not genuine.  I even checked for the new product key given me with the upgrade of $89.  Nothing works.  Why is happening out of the blue?  Another screen pops up saying you can be a victim of software counterfeiting.  To use all the features of MS Windows, IE. all the updates of Windows updates, download the latest updates, receive product support.  Your copy of Microsoft Windows must be validated as authentic.  I hope there, can someone help me with this.  Thank you very much

  Hmmm, should be ok.  It looks like microsoft.

  Are you located in one of the countries listed?

  I hope that you have not shared this key with anyone. The key can only be used on a single computer.

  I'm puzzled. go to the class forum that looks like the only way this will get sorted. Darin is the only one I know who has the tools to analyze your key. He works at microsoft. Also, I could be wrong on the error code.

  http://social.Microsoft.com/forums/en-us/genuinewindows7/threads

  A thought more: makes the button in the report match the anytime upgrade button, you received in your email?