Windows Photo Viewer to use a window only

Similar Questions

• Windows Photo Viewer cannot open *.tif files

  Hi Windows Photo Viewer don't open no * tif files on computers Dell desktop running Windows Pro 8.1 and Windows 7 Professional.

  Do not use a drive.

  Tried system restore, but does not solve the problem.

  Windows posted a temporary fix (https://support.microsoft.com/en-sg/kb/2635500), but recommended "If you are not severely affected by this problem, we recommend you wait for the next software update, which will include this fix."

  Windows finally gets out the permanent fix for users?  Still waiting.

  The patch in KB2635500 appears directed at problems with files TIF MultiPage (usually of the faxes).  Do you do business with?  You get the error message that is mentioned in the article?

  If this isn't the case, what exactly happens when you try to open a single TIF file (non-multi-site)?  Is it just does not open or you get an error message?  If the latter, what is the full text of the error message?

  It is possible that the Windows System File Checker can solve this problem.  Open an elevated command prompt (right click > run as administrator) and enter the command:

  sfc/scannow

  See https://support.microsoft.com/en-us/kb/929833

  Or you could abandon the Windows Photo Viewer and use the much more versatile application free IrfanView: http://www.irfanview.com/

• I can no longer print Windows Photo Viewer printer works very well with all the other prog

  My Epson printer has always worked well with the Windows Photo Viewer that I prefer to use.
  A few weeks ago, I ran a computer cleaning prog that I didn't like, and so removed, now I can print from any program except Windows Photo Viewer
  I use Win 7 Home Prem 64 bit

  Hello

  Thanks for the reply.

  Method 1.

  Check that you are doing the default Windows Photo Viewer.

  Try the steps below; It could help us solve the problem.

  1. open default programs by clicking the Start button.

  2. click on Control Panel, and then click default programs.

  3. set your default programs. This option allows to choose the programs that Windows uses by default.

  4. Select Windows Photo Viewer in the list and click Set this program as default.

  5. try to access photo and check if it opens with the Windows Photo Viewer.

  Also access the link to know how to set and change your default programs: http://windows.microsoft.com/en-US/windows7/Change-which-programs-Windows-uses-by-default

  Method 2.

  I suggest that you can exercise SFC scan and check if that helps. The SFC/SCANNOW command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  For more information how to make SFC / scan, please follow this link: http://support.microsoft.com/kb/929833

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• Photo Viewer seem to use the incorrect color profile.

  I created a color profile by using X-Rite color grading equipment.   All my programs on my PC Windows 7 display the colors correctly except the photo viewer that shows all the colors in the dark.

  For example in Photoshop or Microsoft Office Picture Manager, you can see the details in the shadows, but with the same photo in Photo Viewer, the shadows are so dark that they don't see all the details and all the colors seem much more dark and intense.

  I used to use windows XP and did not have this problem.   Color calibration equipment is new and I use the latest version of the X-rite software on my Samsung SyncMaster monitor.  I found this same problem on another computer in Windows 7 with another Samsung monitor, but I don't think that its really a Samsung problem because I can not find another program except Windows 7 photo viewer that has this problem.

  I want to continue to use the Windows Photo Viewer, because it is quick and easy and is well integrated into other windows functions.
  I think it would be a simple solution to tell the photo viewer to use the correct color profile or simply to increase the brightness in Photo Viewer, but I can't find where is the setting.

  Thanks for any help to solve this problem.

  Success! ICC v2 switch fixed it. Thanks Alexander_L and dphildphil

• Satellite C650 - Windows Photo Viewer crashes at every time currently in use

  Hi all

  My C650 is a new purchase and so far I was not able to view photos; on a memory stick, in "My pictures" or any form using the Windows Photo Viewer. Once I double click the photo icon, the image enlarged to full screen and freezes at "loading" is displayed.

  At this point, I can't even finish the process using windows Task Manager. I am only a student quite inexperienced in the functioning of computers, so any help will be greatly appreciated!

  Please don t get me wrong, but the best option for you is to ask a friend to you how it works and how to deal with different applications and different image formats.
  I mean who knows what pictures you have, which forms, what capacity and so on.

  With the standard format jpg, to avoid any problems. For example, in the windows Explorer you can find Public folder pictures with a few sample photos. You can open these photos?

• Printing multiple pages to a TIFF file multiple using Windows Photo Viewer

  Original title: printing problem with a tiff file

  Hi guys

  How can I print 2 or 3 leaves only out of 68 pages in TIFF file when I open with 'Window Photo viewer'?

  When press "print", it appear just 'paper size', 'quality' and 'paper' only!

  Please kindly teach me to turned the pages I need.

  Waiting for your reply or response!

  Hello

  You did not mention the version of the operating system that is running in the computer with the problem. We know the version of operating system on this computer.

  Windows Photo Viewer application allows you to view multi-page TIFF files, but it does not allow to print a number of pages in a multi-page TIFF file. In order to achieve this functionality, you can have a look at the workaround solutions provided in the answerin the following threads:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/unable-to-print-only-one-page-in-a-multiple-page/737b4afc-0D0E-4cb8-8374-f6de218720b2

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Windows-7-and-multi-page-TIFF-document/b5cf2c8d-d4a0-49f8-A674-fdc6b3d200c1

  (Note: in the link above, a third-party program is proposed as a workaround.) Please keep in mind that using a non-Microsoft program is at risk of the user and for all the problems arising from the use of these programs, the user must contact the manufacturer of the respective program)

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/Windows-7-How-do-i-print-only-selected-pages-in-a/9b0d846c-C765-E011-8dfc-68b599b31bf5

  I'm not one of these workarounds should help you. If you still need help on the question or with Windows, get back with more details and we will be happy to be of assistance.

• I receive photos that are on the side and Windows Photo Viewer won't let me turn, because it says that the file might be in use or open in another program.

  I receive photos that are on the side and Windows Photo Viewer won't let me turn, as it said that the file might be in use or open in another program or the file or the folder may be read-only how can I change so that it can rotate? This happens mostly with photos sent from the iPhone.

  original title: not able to rotate the photo

  You are welcome and thank you for the comments.

• How to remove red-eye using Windows 7 Photo Viewer

  Help!

  How to remove red-eye using Windows 7 Photo Viewer

  Windows Photo Viewer, it's just what it says, a spectator only. But there is no editing capabilities.

  To edit a photo, you will need software such as Windows Live Photo Gallery or IrvanView (to name only a few).

• Cannot display pictures using Windows, error Photo Viewer: cannot open this picture because you don't have the appropriate permissions to access the location of the file.

  Original title: ASK the VIEWER of PHOTOS WINDOWS WINDOWS 7

  WHEN I OPEN MY IMAGE (PHOTO) COLLECTION IN WINOWS PHOTO AT SUNDAY VIEWER BUT IT WINDOWS PICTUREMESSAGE cannot OPEN THIS PICTURE BECAUSE YOU HAVE not the PERMISSION APPROPRIATE TO the ACCESS of the LOCATION of THE FILE, I CHECK NO VIRUSES, NO PROBLEM to OTHERS AND SAID THAT SATURDAY, I OPENED TIME OPEN THE PICTURES, BUT AFTER ONE DAY WHAT PROBLEM ANY DEFINITION of PROBLEM OR OTHER PLEASE HELP ME AS AMODERNE, IF YOUR NEED A FURTHER INVESTIGATION OF MY SYSTEM SAYS I SEND YOU AS BURT SOLVE THIS PROBLEM

  Hi JULIE,.

  Thank you for writing to Microsoft Communities. From your problem description, I understand that you are not able to view pictures using Windows Photo Viewer. Please correct me if I misunderstood.

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  Until we start troubleshooting on this issue please provides us with additional information by answering a few questions below, this will help us better solutions to the problems.

  1 did you change on your computer before the show?

  2 are you able to open the file using paint?

  Please follow the steps mentioned below:

  Method 1:

  Step 1: Perform safe mode

  Safe mode, start Windows in a limited State, where only the essential is started. If a problem does reappear when you start in safe mode, you can eliminate the default settings and basic device drivers and services as causes possible

  Start your computer in safe mode with networking

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Step 2: Perform the clean boot

  A clean boot helps eliminate software conflicts. The article below describes how to solve problems in Windows 7 by performing a clean boot. This article also describes how to start the Windows Installer service and how to reset the computer so that it starts as usual. To configure your computer to clean boot see the following link.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow step 7 in the article to start on normal startup.

  Method 2:

  System Restore can return programs and system files from your PC to a time when everything was working well.

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  Note: If you have installed an application after the date to which you are restoring, you will need to reinstall these applications

  Please complete all of the recommended steps and if after following the steps to issue still persists, please come back to us and we will be happy to provide you with additional options available that you can use to get this problem is solved.

  If you are unable to perform the steps mentioned above, I recommend you to contact our live support by clicking on the link http://support.microsoft.com/common/international.aspx?RDPATH=dm;en-us;selectassist&target=assistance

• Cannot rotate JPEG of DSC-WX350 pictures in Windows Photo Viewer. Should use memories of play?

  I recently bought a Sony DSC-WX350 and uploaded pictures on my PC. I can see/open the pictures, but I can't rotate JPEG images using Windows Photo Viewer (I can easily rotate images taken with my Canon and Olympus cameras). I tried to rotate the images on two different PC's with the same result (using Windows 8). Sony offers a software play memories, but I don't want to download and use yet another software package when all I want to do is rotate images before sharing them with family and friends. If I rotate the images before sharing them, my family / friends would have to download the software of memories play in order to rotate/edit? I tried not to actually change the photos again, which could also be a problem. I tend to return the camera. Thank you

  Hello xctour,

  Please check the image properties and uncheck [read-only] only then try to rotate the image or rotate the image using Microsoft Paint.

  If my post answered your question, please mark it as "accept as a Solution.

• The desktop icons only open Windows Photo Viewer

  When I select a desktop icon open them all the Windows Photo Viewer. All icons are referenced to the correct program.

  Hello

  We can consult about it and check if that helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-desktop/Vista-desktop-shortcut-lnk-file-associations/549cf3d1-5fa8-4611-813d-7795f431b48a

  Furthermore, I would like to you can create a new user account and check if that helps.

  Create a user account: http://windows.microsoft.com/en-IN/windows-vista/Create-a-user-account

  If the problem does not occur in the new user account, you can transfer the files from the damaged to the new user account by using the article user account "difficulty a user profile is corrupted.

  Difficulty a user profile is corrupted: http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• Windows Photo Viewer displays only the gray scale. No color.

  I am running Windows 7.  When I print a document on the web, it prints in color.  If print it by using the default program (Windows Photo Viewer) it prints in grayscale.  Have checked all the settings, but can't seem to find what is causing this problem.  I tried printing from other programs and I don't get color.

  Everybody out there affected by this problem and what did you do to correct the problem.  Thank you.

  Randal

  This link explains the software is no longer available.  But thank you.  Randal Randal

  =====================================
  Yes, the file is still available at the link is a little...
  It might be worth trying different

  Windows Photo and slideshow problems
  http://support.Microsoft.com/mats/windows_photo_and_slideshow_diag/en-us

  The file is accessible also from the following MSKB article:

  (2415238) color problems in print preview
  image in the Windows in Windows Vista Photo Gallery
  http://support.Microsoft.com/kb/2415238

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• "Fix" mode in the windows photo viewer 7

  Having had only windows 7 during about 2 months now, I used the windows photo viewer to make minor changes on my photos. Red eyes, cropping etc. black and white. This has been achieved by clicking on the word "Fix" on the tab at the top of the photo, with the file, print, open, e-mail and burn. For some reason I seem to have lost this application at night. Please can someone help as I use it much this tool. Im not sure if she disappeared with the last update of download.

  Thank you

  Windows 7 is not 'Fix' feature in Photo Viewer. You can download and install Windows Live Photo Gallery 2011: -.

  http://explore.live.com/Windows-Live-Photo-Gallery?OS=other

  S.Sengupta Media Center MVP

• You can turn the photo in Windows Photo Viewer

  Judging by the large number of comments, rotating an image in Photo Viewer seems to be a common problem and I do not understand why. Have spent a lot of time to wade in these messages, and am even more close to an answer. I followed the instructions in http://windows.microsoft.com/en-US/windows7/Rotate-a-picture-using-Windows-Photo-Viewer and everything works well until you reach step 3, where the image is in the viewer of photos ready to be turned except that neither rotation arrow functions. Would appreciate a person offering a convincing explanation to the simple function to transform an image on the screen vertically on the side. Thank you very much.

  This is for all images or only some?

  Check that the 'Read only' attribute is not defined for the relevant photos. Right click on the image, click 'Properties' and in the [general] tab make sure "Read-only" is not checked. If this is the case, try unchecking it.

  If you can not yet use turn, run a sfc/scannow and see if it detects and solves all problems.

• Windows Photo Viewer stopped opening PNG files

  Using Windows 7, 64 bit. Windows Photo Viewer no longer displays one. PNG file. He has always worked in the past. I get the error message

  Windows Photo Viewer cannot open this picture because the file seems corrupted, altered, or is too large.

  A similar message is obtained from Windows Live Photo Gallery

  Microsoft Picture Manager is OK, like paint, Irfanview, Picasa and many other programs.

  I've updated MS .NET to 4.5 as suggested in another post.

  This also affects the ability of the Explorer to display thumbnails when the photo viewer is the default program for PNG.

  Your system ceased to display PNG files after Microsoft Update KB2670838 was delivered to your computer through Windows updates in late February 2013.

  Software developers cannot possibly predict all future updates that Microsoft will make to its operating system or applications. Do us, however, solve the problems when they occur and publish updates as necessary.

  A more reasonable notice might suggest looking for an update of the FastPictureViewer Codec Pack instead of pointing the finger and recommending other users to uninstall our product that if it turns out, was not directly responsible for the issue.

  You also do not mention that uninstall the FastPictureViewer Codec Pack - while setting the PNG issue you know - also disabled Explorer thumbnails and previews of the Windows for Adobe PSD, EPS Photo Viewer, I and the other 40 formats support us.

  The compatibility problem that resulted from the installation of KB2670838 was identified and corrected since, as well as another problem of compatibility that is revealed only after the release of Microsoft Office 2013.