Windows Security Center does not start

Similar Questions

• My windows Security Center does not open and I get a notice that "no software firewall is detected.

  My Windows Security Center does not open, and I am also unable to turn on my firewall.  I get notification "not detected any firewall software.

  Hello

  It seems that you need help to solve the problem of Windows Security Center. Please respond to the suite, which will help us to help you in the right direction.

  1. do you get an error message when you try to turn on the firewall?

  2. which antivirus app do you use?

  Refer to the following information and check the status of the issue.

  See the section "Nithyananda J replied on November 27, 2009" what about Windows Security Center

  The windows Security Center service cannot be started.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/the-Windows-Security-Center-service-cant-be/d8250e7a-ee3c-4302-8CA6-9e2a10262feb

  I also suggest you to run the Fixit from the following link.

  Diagnose and automatically fix problems of Windows Firewall service.

  http://support.Microsoft.com/mats/windows_firewall_diagnostic/en-us

  You can also try to solve the problem by running SFC scan

  Make the SFC scan and check the status of the issue.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  I hope this helps.

• Windows Action Center does not start

  I got a virus in my computer a few weeks ago and I managed to clean it away. However, I just noticed that the action center to my computer does not start.  Whenever I try to turn it on, it shows me a message "unable to start the Windows Security Center service. In fact when I use the services.msc program, that's not even be on the list here. Firewall does not normally or the other. It just shows the message "Update your firewall settings" and when I click on the box "Use the settings recommeded" it shows me an error message "Windows Firewall cannot change some of your settings for error code 0 x 80070424.

  Of course there is a lot of information on the Internet about the problem, but none of them does not seem to work in my case.

  I have Windows 7 Home premium sp1.

  I even tried to repair my windows installation, but that no longer works. He refused to uppgrade to a previous version, because the drive is off course basic win7 and my current one is win7 sp1. There are also some programs that are in conflict, even if I could not even find them in my computer.

  Is there any solution for this?

  It helped with my Action Center problem.

  http://GeekDrop.com/content/Windows-Security-Center-service-is-missing-and-wont-start-solved

  And this with the firewall.

  http://www.SevenForums.com/system-security/202166-unable-start-Windows-Firewall-2.html

  Win 7 security 2012 was the virus.

• Windows Security Center does not illuminate

  Just installed Microsoft Security Essentials. Windows Security Center is in stop mode and running. Windows Firewall and microsoft defender both say they are on.

  Hi woodcockvet,

  Do you have an error message when you enable Windows security Center?

  Step 1: Run the fixit available in the article below and check if that makes a difference

  You can't turn on Windows Firewall in the Security Center

  http://support.Microsoft.com/kb/2271812

  Step 2: Try to activate the Windows Security Center service and repair the WMI (Windows Management Instrumentation) database repository

  You can follow the steps mentioned in the link below that relates to a similar question

  http://social.answers.Microsoft.com/forums/en-us/w7security/thread/f6e51590-47b3-489F-9921-173d106a9738

  Note: Some security software takes over Windows Security Center and uses its own Security Center.

   

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Security Center does not recognize the webroot security essentials

  I have webroot essentials of security installed on my windows 7.  The Security Center is not recognize the program. This program has antivirus, antispyware and firewall.  The webroot program works normally. Security Center sees no antivirus, windows firewall is enabled (but in fact webroots Firewall works), says and shows that the antispyware windows Defender (previously, he showed have spy sweeper from webroot and windows defender). My question is how can I get the windows Security Center recognize the webroot program? THX

  Hi, thank you for responding. I could solve my problem simply by uninstalling and reinstalling the webroot program. After you reinstall and reboot, windows security center see and recognize the antivirus, firewall and antispyware components

• Windows Security Center does not detect not Antivirus software

  Windows Security Center detects antivirus software, even if McAfee indicates that I am fully protected. I'm on a new Dell Inspiron 1525 with Windows Vista Premium.  How to solve this?

  Hello

  see if this http://community.mcafee.com/showthread.php?t=226514 helps. Vincenzo Di Russo - Microsoft MVP Windows Internet Explorer, Windows Desktop Experience & security - since 2003. ~ My Blog: http://blogs.dotnethell.it/vincent/

• Windows Security Center does not recognize my Anti Virus

  Mr President, I have Windows XP Home Edition 2002, it's completely up to date with your updates.  ESET NOD 32 is installed and registered properly my system antivirus.   About 2-3 months ago, I installed one of your updates and noticed after completing the red shield appeared informing me that he couldn't dectet my antivirus program, (my antivirus program is running correctly - it was the first time this has happened).    A few days later, the Red Shield has disappeared and on control of the Security Center, he said he was grateful now my antivirus.  2 days ago I installed again your updates, and it's the same thing.  I contacted ESET to know that if my Antivirus system works properly, they said it was and suggested that SP2 is damaged and I need to download.  I tried and it doesn't let me do as my system is completely up to date.    When I started my computer today the red shield appeared with the same message.  I did a scan of my complete system, without defects have appeared.  Could you please help me in this case.  Robert.

  Hello Tony,.

  Follow these steps and check if it works:

  a. press Start > type in the box "services.msc" and press Ok

  b. in the list of services, double-click on Windows Management Instrumentation. Click stop , and then click OK.

  c. now locate the folder C:-WINDOWS-system32-wbem------repository and delete it.

  d. restart the services Windows Management Instrumentation and restart your computer

  Let us know if that helps.

• Drive HARD 2000-0146, windows Security Center does not, all downloads have refused as containing viruses. PDF answer either.

  His Dell Inspiron 1464, purchased in 2010.

  * HDD error 2000-0146, how to fix it.

  * Eset Nod32 does not and has not been allowed to work properly.it has no web access protection.

  * IE does not open any website and emails, downloading is permitted as States contain viruses.

  * Currently eset nod 32 is not installed on my laptop.

  the problem is not too big and small, that I updated all drivers and scanned a month ago to remove all viruses etc.

  But I can't find a way to fix above error to avoid a reinstallation.

  * I updated my BIOS and it sees SATA.

  * PC diagnostic shows no errors of any kind.

  * has tried all the win-fix-it.

  Thank you.

  I was looking for something for you in the Forums and finally found.

  Read the answer by The ball

  "I get the error message"xxxxx.xxx"contains a virus and has been eliminated ' downloads... on all software updates from microsoft.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/i-get-error-message-xxxxxxxx-contains-a-virus-and/fbb5e0fd-63bd-4E01-9a98-6074d33a8fd6

  See you soon.

  p.s. with RKill, there are a few other names available for download of RKill attempt to deceive malware.

• Windows Security Center does not recognize my antivirus

  I installed a new driver for my Radeon 3450 graphic card. I had a problem with it and could not roll back so I tried restoring the system did not work. Since that time WSC won't recognize my Norton AntiVirus. I am running Vista 32 bit on an Acer Aspire M3201. Any suggestions? Thank you.

  Do not think, but you may as well uninstall it now. Since then he probably won't do anything once it expires in any case.

  You can try this when well even if it isn't Norton it can work. If you need assistance I could help you with teamviewer. You'll see what I'm doing

• does anyone know why my Security Center can't turn on the only show a message (windows Security Center cannot be started)

  does anyone know why my Security Center can't turn on showe just me a message (windows Security Center cannot be started) what can I do for this?

  If someone help me I thank a lot.

  Hi belizariocruz cruz,.

  ·         You receive an error with the message code?

  ·         What is the operating system installed on the computer?

  This problem may occur if the Security Center service is not configured to run under the Local Service account, but the dependent services are configured to run under the Local Service account.

  Note: The following can be used for Windows Vista and Windows 7.

  Method 1: To resolve this problem, make sure that the Security Center Service and all its dependencies are configured to run under the Local Service account. Set the center of security and its dependencies services to run under the Local Service account.

  a. Click Start, type services.msc and press to enter.

  b. double-click Security Center, click on tab log .

  c. Select "this account" click on the Browse button, type Local Service and click ok.

  d. type the password and confirm the password and click ok.

  Method 2: You can run the Microsoft Safety Scanner for any infection by virus. Check out the following link to do the same thing.

  Microsoft Safety Scanner - free online tool for PC health and safety

• Security Center does not recognize the Windows Security Essentials

  Windows Security Essentials does not seem to register with Security Center.  Security Center reports that no Virus protection is enabled.

  1. I installed Windows XP 32 - bit WGA, activated the product and updated to SP3.

  2 security Center starts giving Windows security alerts for Virus protection, because none has been installed.

  3. I installed McAffee VirusScan.

  4 security Center stopped giving Windows security alerts for Virus protection.

  5. I uninstalled McAffee VirusScan.

  6 security Center has resumed giving Windows security alerts for protection against the viruses as before.

  7. I installed Windows Windows Security Essentials and rebooted.

  8. I tried to uninstall and reinstall Windows Security Essentials with no joy.

  Windows Security Essentials installation did not prevent Windows security alerts.  No Windows Security Essentials registry entry will appear in HKEY_LOCAL_MACHINE/Software/Microsoft/Security Center and monitoring.  If Microsoft consider essential security to be an antivirus product, then how to Windows Security Essentials register with Security Center?

  I understand that this is an information and alert issue only.  I understand that Windows Security Essentials works actually ok.  I am particularly concerned by the reports.  It conditions my deployment of Windows Home Server.  Deactivation of surveillance or the alert is not a solution, just a poor quality work around.

  In a previous thread, the author of this question even abandoned and has not requested additional assistance.  An explanation was given (relevant for Windows 7), but no solution has been offered.  Windows XP has not been addressed.   http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/the-Security-Center-has-not-recorded-an-anti-virus/15ae2383-7ced-4850-A863-f7eb8cc90ee5

  I had the same problem for a while now (I'm on xp) and have searched the Internet for a solution but found nothing at the moment.

• Security Center will not start.

  I don't know how long it has been so, but I noticed yessterday that the Security Center does not illuminate.

  No will the firewall or the Defender.

  I ran Malaware and Spybot, and moy. Nothing showed except for some tracking cookies, but nothing major.

  I've ran out of ideas and really don't want to have to do a complete reset to original.

  Can someone please help with some ideas of what either elsed I can try.

  Thank you in advance.

  Hello
  Follow these instructions to fix the Windows Firewall:
  Download and install Windows Repair:
  http://MajorGeeks.com/tweaking.com_-_Windows_Repair_d7141.html
  When the repair of Windows opens, click on the tab to start repairs, click Start. Uncheck all boxes except for the following:
  -Reset the registry permissions
  -Reset the permissions of files
  -WMI repair
  -Repair Windows Firewall
  Then click on start. Once it is finished, restart your computer. Let me know if this helps you.
  Brian

• Windows 8: Windows Security Center cannot be started

  Hi all

  I get a flag at the bottom right of the desktop view saying that Windows Security Center is not enabled. But whenever I click "Activate Windows Security Center service", it says: "cannot start the Windows Security Center service." And when I go into the Services, it does not list it at all, almost as if it does not exist. This only started happening after I installed an antivirus is antivirus? (avast! Free antivirus)
  Thanks in advance,
  Dolorate

  Hello

  Please try the hotfix that is described in the following article to resolve your issue:
  http://www.kapilarya.com/fix-unable-to-turn-on-Security-Center-in-Windows-8
  Hope this helps, good luck :)

• Firewall Windows has been disabled by a virus or Malware. System is now cleaned and Salvation took up the Task Manager, but the Windows Firewall service does not start. How to run again.

  Firewall Windows has been disabled by a virus or Malware. System is now cleaned and Salvation took up the Task Manager, but the Windows Firewall service does not start. How to run again.

  Suggest you read the following: http://answers.microsoft.com/en-us/windows/forum/windows_7-security/virus-recovery-error-codes-0x80070424-and/28ed2ede-076c-4955-bb49-44d0c2ee1ed3

  I hope this helps...

• I get a message that my Windows Security Center is not on, but when I go to the center of the Action it won't let me turn it on

  I get a message that my Windows Security Center is not on, but when I go to the center of the Action it won't let me turn it on.  What should I do?

  Hello

  · You have a third-party security software installed on the computer?

  · What is the error message that you receive the error code when you try to turn it on?

  · Do you remember all the recent changes on the computer before the show?

  · What is the service pack installed on the computer?

  Follow the methods below:

  Method 1:

  Make sure that the Security Center service is configured properly, and then start the Security Center service. To do this, follow these steps:

  a. click on start, click on run

  (b) in the Open box, type services.msc

  c. on the right side of the window, locate the Security Center service in the list of services.

  d. right click on Security Center, and then select Properties.

  e. in the drop-down list startup type, select Automatic (delayed start).

  f. under service status, click Start.

  g. click on apply, click OK, and then close the Services window.

  Method 2:

  Run the verification and virus scan online if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)