Similar Questions

• the UCS blade iscsi initialization cannot install windows server

  Hi all

  I have a problem when I try to install windows server 2008 in the storage of nexenta using iSCSI via ucs b-series, but his works well when I install ESXi 5.5. I can't find disk under windows server installation, and I see all the LUNS in ESXi what im create before nexenta storage and work when I install it.

  This vnic iSCSI Configuration:
  ----------------------------
  vnic_id: 13
  LINK_STATE: to the top

  Initiator Cfg:
  initiator_state: ISCSI_INITIATOR_READY
  initiator_error_code: ISCSI_BOOT_NIC_NO_ERROR
  VLAN: 0
  DHCP status: false
  IQN: test: iqn.2014 - 11.com.:8
  IP address: 192.168.1.59
  Subnet mask: 255.255.255.0
  Gateway: 192.168.1.5

  Cfg of target:
  Target the Idx: 0
  State: ISCSI_TARGET_READY
  State of PREV: ISCSI_TARGET_DISABLED
  Target error: ISCSI_TARGET_NO_ERROR
  IQN: iqn.2010 - 08.org.illumos:02:windowsboot
  IP address: 192.168.1.49
  Port: 3260
  Starting logical unit number: 6
  Ping statistics: success (986.646ms)

  Info session:
  session_id: 0
  host_number: 0
  bus_number: 0
  target_id: 0

  can anyone help me to solve this problem?

  Thanks in advance - Fabre

  ENIC / fnic driver must be installed. they are not part of any Windows operating system.

  they can be found in

  Home downloads
  Products
  Servers - unified Computing
  Series B UCS Blade Server Software
   
  Unified Computing System (UCS) Drivers - 2.2 (3)

  ISO image of drivers based on the UCS 
  UCS-bxxx - drivers. 2.2.3.iso

  Depending on the version of the UCS.

• Cisco UCS C220 M3 SFF and R2 Datacenter Windows Server 2012

  Hi Experts,

  I intend to install Windows Server 2012 R2 Datacenter as an operating system for Cisco UCS C220 M3 Small Form Factor. This deployment is - supported?

  Thank you.

  Sy

  Yes, according to http://www.cisco.com/web/techdoc/ucs/interoperability/matrix/matrix.html

  Manufacturer = Cisco

  Driver = 2.2.0.17/2.2.0.13(NIC)
  Adapter Firmware = 2.1(1a)
  Startup code / BIOS = 2.1(1a)

  C220-M3(SFF/LFF) server requires version 1.4.7a [use HUU 1.4.7a.1].

• Windows server 2012 on 2.0 (3 c)

  I see in the matrix of interoperability for 2.0 (3 c) fi fw windows server 2012 is not an operating system supported. Will it still work with a driver of some package?

  Is there a minimum firmware version FI in order to run windows server 2012 on B200 M3 or B440 M2?

  Thank you

  Hello

  I see in the matrix of interoperability for 2.0 (3 c) fi fw this server windows 2012 is not a supported operating system. Will it still work with a driver of some package? This will probably work, but you can see that the blade may not work as expected.

  Is there a minimum firmware version FI in order to run windows server 2012 on B200 M3 or B440 M2?

  Windows 2012 became taken in charge for these blades on firmware 2.0 (4)

  UCS HW and SW interoperability

  http://www.Cisco.com/Web/TechDoc/UCS/interoperability/matrix/matrix.html

  

  Please always evaluate the useful answers

• Windows Server 2008 R2 on Flexflash?

  We recently received a UCS C240 M3, which has two slots for SD (flexflash).  Is it possible to install Windows Server on SD cards?  The documentation says that you could use if for a BONE, but stop before mentioning Windows.  Of course size limited and fixed the HV partition could be a hold-up in and of itself.  Any thoughts while I wait on my hard drives?

  Thank you.

  Hi Daniel,.

  The partition of the hypervisor on the flash flex is only 4 GB as mentioned wdey. The installation of windows 2008 requires a minimum size of 10 GB lun then it would be not enough for this purpose (see windows 2008 requirement below).

  System requirements for Windows Server 2008

  http://TechNet.Microsoft.com/en-us/WindowsServer/bb414778.aspx

  Let me know if that make sense and do not forget to rate helpful answers.

• Windows Server 2008 VM closing evening

  I have a service request open with VMware on this point, but at the moment, it is a head scratcher, and I thought that I post here to see if anyone has any ideas.

  I have a cluster ESXi 4 consisting of four blades Cisco UCS B250-M2, each with 12 processor cores and 384GB of RAM. They are connected through a 10 GB uplink to a Nexus 5 K, and the storage is fibre channel LUNS on an EMC NS-480.

  We manage only about 150 VM of the consisting of a combination of 2008 and Windows Server 2003 servers.

  What we noticed a few months ago who is pretty much every night, we would have a couple of Windows 2008 servers who would just stop and power back up. Not a BSOD or a stop, but an unexpected shutdown. As we continued to deploy virtual machines more the problem seems worse to where we would have 5-6 VM stop every night, sometimes twice a night. This is not always the same virtual machine, but he always seemed to be a few among a group of about 20 servers that kept do.

  We studied about all aspects of the operating system thinking it had something to do with antivirus or updates Windows, kicking off in the night, but we went to the top of nothing after a week of exhaustive research.

  As an idea, I decided to spend 10 VM Windows 2008 that have been constantly crashing to another cluster running ESXi 5. Once I did, the accidents stopped. The interesting thing is that the servers that I moved to ESXi5 has stopped crashing, but we also ceased to have accidents on the ESXi4 cluster.

  I started to think that maybe we hit a capacity issue any. So last night I have deployed 10 test Windows 2008 to the ESXi4 cluster servers and waited. Of course, in the night, we had about 6 servers (including 2 new servers test) start to close again.

  So now I'm trying to understand what it is in this environment that makes these Windows 2008 servers stops. It does not affect 2003 servers, only the servers from 2008, and not all, only some of them.

  Can someone shed light on this or give me something to look for?

  Good to know, I don't know the GSS VMware will be able to help on this.

  I think that you cannot change the status of a response useful, but too bad.

  Else, we can help you, just shout!

• Windows Server appears in the sidebar

  Suddenly, I have a server windows appears in my side bar of the finder. It connects to nothing. It cannot be dragged out of the sidebar.

  My wife pro MacBook is connected, and I can see and access that.

  pathbar on the windows server says 'network', but the id is not the same as sys pref > network > advanced? victories on my computer or my wife.

  If I stop and restart, it disappears, but if I have access to the macbook pro, it reappears.

  I selected and deselected all in finder prefs and it does not go far, and the icon "Everything" is new.

  some screenshots to illustrate:

  

  

  How can I get rid of this windows server?

  Thought about it - stupid windows laptop to my wife used my network :~(

• iCloud for windows server

  Hello

  I want to iCloud for windows server

  TNX

  Hello aminicpa,

  Thank you for using communities of Apple Support.

  If I understand your message you are trying to download iCloud for Windows.  As it is a tool designed for a personal computer, there is only one version.  To get instructions on iCloud for Windows download, take a look at the instructions in the link below.

  Download iCloud for Windows

  Have a good.

• Pavilion c 500-467: windows server 2008 display driver

  I am running Windows Server 2008R2 64 bit on a pavilion with a HP2509m monitor 500-467c. Which shows the driver works with this combination of material? I see Windows 7, 8 and 10 64-bit on the driver list, but not Windows Server 2008.  Help please!

  Hello:

  You want to try the W7 64 bit drivers for 2008 Server R2.

  Try to install the drivers manually if automatic installation method does not work.

• Definitions for Windows Server 2008

  Hello!
  I was looking for definitions of toshiba for windows server 2008, and then I realized that there are no definitions for windows server 2008.

  So if someone knows how to fix this please let me know.

  You are right. Support Toshiba doesn t Windows Server 2008 and as a result you will not be able to find any Toshiba statement associated with this OS.

• Need drivers for Windows server 2003 on Satellite A200

  Hello
  I have the Satellite A200 (PSAEC).
  I have install the operating system Windows Server 2003 on my laptop and I can't find a lot of drivers (there are drivers for XP and Vista on the Russian Web Site only).

  Plese help me with my problem.
  Thanks for in advance!

  All you need to do is understand that laptops are not designed for such purposes and because of that there is no support for Server 2003.
  All modern operating systems that sense with mobile computing are supported.

  Think about this.

• Upgrading to Windows Server 2003 Standard Edition

  I buy a Satellite M30x and for work, install Windows Server 2003. But the two devices was not recognized (PORT COM, SERIAL PORT?), no driver has been found. Someone has an opinion to solve this problem. In Device Manager, there are 2 system device Base System (?).
  Thank you

  Hello

  I think Toshiba does not support drivers for Windows Server 2003 for all laptops!

  So the only thing you could do is to try the drivers XP (utility chipset) or search the net en some drivers available!

  Goodbye, Sam

• Satellite A200 - Installation of Windows Server 2003

  Dear Sirs,

  Recently, I bought a toshiba Laptop which has Vista Home Premium operating system. In the free space on the hard drive, I intend to install Windows Server 2003. When I insert the CD, the "install Windows Server 2003" is disabled. It does not run the application installation, and as such, I couldn't install this operating system.

  I even tried to start the insttallation put the DVD drive as a boot preference. Still it I cannot install the Windows Server 2003 operating system.

  Can someone help me in this problem. I wanted to install the Windows Server 2003 next to the Vista operating system.

  Thanks in advance.
  Rama

  > When I insert the CD, the "install Windows Server 2003" is disabled
  What do you mean by people with disabilities?

  You are not able to boot from the CD?

  In these cases, please press the C button immediately after switching on the laptop. This should allow booting from the CD/DVD drive.
  Alternatively, you can try to press the F12 key instead of the C key. This should allow the start menu. Then you could choose the STRANGE as boot device and might try to boot from the CD-ROM Server Win.

• ProBook 6560 b: wireless network drivers - R2 Windows Server 2012

  Would like to know if one got successfully installed Windows server 2012 R2 drivers. I try to install the drivers wireless for two days now and could not get their work. Any help would be really appreciated.

  Thank you

  Hello:

  I don't work for or represent HP.

  All I can advise is that HP offers no support or drivers for all windows server operating systems for any mobile business or consumer they ever made.

  With this track record, I doubt very much they will be.

  In addition, it would be Intel to release Windows Server drivers for their wireless cards, not HP.

  I've never seen a card driver wireless for windows server on the Intel Web site.

  Normally the equivalent standard windows drivers work on Windows server most of the time.

  For example: If you had installed Windows Server 2008 R2 on your laptop, wireless Intel W7 driver probably would work.

  But since there is no equivalent W10 driver for the wireless card model that your laptop is, I have a feeling that is the reason why the wireless card does not work.

  You may laugh with some of the advanced settings for the card under the Advanced tab in Device Manager to see if you can get the card to work.

  Enable WMM for example.

• Cannot download files exe on Windows server

  I can not download exe on Firefox installed on Windows server 2003 files. I don't know that it's because of security Windows/IE "features." This does not work under Firefox 3.5, you can add a parameter to ignore these, but for some inexplicable reason with 3.6.
  Is it possible to force Firefox 3.6 to ignore the Windows/IE security settings? Otherwise, I'll need to come back to 3.5 or use IE.

  There are ways around it in Firefox 3.5 and Firefox 4, but not in Firefox 3.6. Firefox 3.6, you need to change the security settings in Internet Explorer - http://support.microsoft.com/kb/923737