Windows Server 2003 P2V domain controller

Similar Questions

• Windows server 2008 r2 domain controller deletes printers on windows 2003 Server

  We have recently installed two new Windows Server 2008 R2 servers in our field.  one of the new servers is the new domain controller (successor of Windows Server 2003 SBS, which has been decommissioned).  There are two other Windows 2003 servers in the domain.  When we turn off all servers for maintenance and then power them back on, the print on the windows 2003 Server spooler crashes; printers are deleted and the server does not allow you to add printers.  is this be caused by some settings in windows server 2008 r2?  This happened twice, and the solution is to rub the print on the windows 2003 Server spooler and reinstall the printers from scratch.

  Hello MPF_mec29,

  Thanks for posting your question in the Microsoft answers Forum. If you have questions about Windows Server, please visit the following link:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Eddie B.

• Windows Server 2003 virtual domain

  Hi people, I have a Virtual Server 2003 running on WMWare workstation. I run the DCPromo.exe command to make the server to a domain controller if I use AD with it. I'm basically wanting to use the virtual server so I can create a domain (mydomain.com) thereon for testing purposes. I have my 70-290 exam coming up and want me able to put in place a field (even though its probably not under review).

  The problem is that I can't get the Windows 7 workstation that is running the virtual machine to join the domain of servers. Same ping IP address of servers I do not get a replica of the workstation. However, I can get a response from pinging the server to the workstation.

  Any help would be appreciated.

  Thank you

  Isn't that to join the windows domain will cause you problems, but it is much easier to have a client as a test bench that is not hosting the rest of the test environment (IE if you configure GPOS evil on your customer and that the customer is a virtual machine, it won't affect anything else)

  http://support.Microsoft.com/kb/323380

• We have DHCP role configured on the Windows Server 2008 added domain controller but we receive errors.

  We have DHCP role configured on adding Domain Controller(OS: Windows2008 R2). On the same, we get the error in the below event viewer.
  The name "domain name: 1 d" could not be registered on the interface with the IP . The computer with the IP did not allow the name to be claimed by this machine.

  Hello

  The question you have posted is related to the Windows 2008 Server and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the best support.

  http://social.technet.Microsoft.com/forums/en/category/w7itpro

• Windows Server 2003 P2V: unable to get material information

  I am trying to convert the server windows 2003 32-bit, I did several times before but this is the first time I'm in trouble.

  Already tried 4 converter versions (4.0, 4.3, 5.1, 5.5), but I continue to have this problem:

  I run the "convert machine" application, choose "this machine", but when I try to move forward, after a few seconds it says "Unable to obtain material information."

  I joined the newspapers and see THEM for myself, but I can't seem to find out what is the problem.

  Tried to reboot, restart the services. I am logged on as administrator, and it also launched "as Administrator".

  It is a local installation.

  Problem solved, I added 4 extra hard drives and has yet to initialize them. Now it runs!

• Why Windows Explorer (Windows 7 PC to the Server 2003 AD domain) keep crashing when accessing files on a network share.

  1. Why Windows Explorer (Windows 7 PC to the Server 2003 AD domain) keep crashing when accessing files on a network share.

  Hi John,.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the link below.

  http://social.technet.Microsoft.com/forums/en-us/w7itprosecurity/threads

  Hope this information helps.

• VMware vCenter Converter Standalone 5.5.0 build-1362012 - unknown internal error trying to P2V Windows Server 2003 SP2

  I have a box of Windows Server 2003 SP2 Standard that fails to convert using vCenter Converter Standalone 5.5.0 build-1362012. After you submit the task in the wizard's GUI, I get "a general error has occurred: unknown internal error". A virtual machine is created and deleted and then a few moments later.

  Create the virtual machine

  192.168.1.201

  Completed

  Search entity by UUID

  Completed

  Search entity by UUID

  Completed

  Remote disk open read-write

  Completed

  Search entity by UUID

  Completed

  Remote disk open read-write

  Completed

  Search entity by UUID

  Completed

  Delete the entity

  SRV-cspnsn. CSPNSN.local

  Completed

  The destination is VMware ESXI version 5.5.0 build-1623387 managed by vSphere Client version 5.5.50 build-1618071. The destination data store is a 5.60 VMFS volume with block size of 4 MB, on a local SATA HDD with 923, 50GB.

  Both machines are in the same network and have no any King or firewall or ACL in switches.

  In the log file, the only error is "error"Ufa.HTTPService"] Impossible to read the application; "flow: io_obj p:0x03403f24, h:-1, < tube"\\.\pipe\vmware-converter-server-soap">, < pipe"\\.\pipe\vmware-converter-server-soap"> >, error: class Vmacore::TimeoutException (Operation timed out).

  Any help would be appreciated.

  Thanks in advance.

  Hi all

  Once the converter VMware-converter-en - 5.5.1 - 1682692 does not work, with a touch of friend uninstall the 5.5 version of Converter Standalone Client, look for the VMware converter version - 4.0.0 - 146302 and install this version to the other machine. No not that I had to be Converter, but the windows 7 Pro 64-bit.

  After this race, the Standalone Client 4.4 Converter and everything work fine.

  Now I have the P2V converted and good machine, as was the real operation!

  I thank all of you.

  Best regards

  ADAJio

• How to disable prior authentication logs on to Windows Server 2003

  Hello

  I was wondering if anyone knew a way to disable the prior authentication logs on to a Windows Server 2003 in the Event Viewer, we continue to receive many of these on our replication server that's used to be the PDC, as it is now a secondary to replicate the domain controller until we have completed the migration of all the stuff on the last domain controller. Your help would be greatly appreciated.

  Thank you very much

  RocknRollTim

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Windows Server 2003 migration

  Hello world

  According to your experience, I would like to get your opinion on the best approach to migrate a Windows Server 2003 domain controller and all the services available thereon.

  A few details:

  In our network, we have 2 Windows Server 2003, one is the domain controller that is the DNS server, DHCP server, file server, mail server (Exchange) and support our intranet (sharepoint 3.0). The other host our SQL Server 2005 (which has 2 databases, intranet and our ERP database).

  In our infrastructure, we have about 50 users, some printers (4) network and about 10 items of group policy.

  Thank you in advanced for your review.

  Best regards

  jneves10

  Hello

  Please post your question in Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Windows Server 2003 cannot connect multiple users.

  I have a server with windows server 2003 and active directory configured to log users on a network. Not on RDP, just ordinary field. The problem that I am facing is that only my account and the administrator account can log on. I have another account to try to test with, but it is said, no newspaper on the servers are currently available to take your request. How should I do?

  I have a server with windows server 2003 and active directory configured to log users on a network. Not on RDP, just ordinary field. The problem that I am facing is that only my account and the administrator account can log on. I have another account to try to test with, but it is said, no newspaper on the servers are currently available to take your request. How should I do?

  Beyond the reach of these consumer forums.

  It is the only domain controller in the domain?  Have you gone through the troubleshooting steps basis for DCs (DCs)?  If the machine you are trying to connect using the credentials of domain see the domain listed in ADU & C, etc.?

• What to do when a PDC to Windows Server 2003 fails

  What to do when a PDC to Windows Server 2003 fails,

  We have already installed additional domain controllers to replicate with the PDC, but after that the Principal domain controller only not the system slows down and you get it working again. What is the fastest way to recover all the information that was in the CDP. Is there a way to retrieve all the information stored in the PDC without having to reinstall everything again.

  http://TechNet.Microsoft.com/en-us/WindowsServer/default.aspx

  Repost nicely in the Community Server above.

  See you soon.

  Mick Murphy - Microsoft partner

• Implementation of a virtual disk that is shared for clustering in Windows Server 2003 Enterprise Edition

  Hello world

  I'm relatively new to Vmware, and I have no knowledge of Linux commands. Here's my problem I have Vmware Workstation 7 installed on my PC, I installed Vmware ESX 4.1 in and use Vsphere client to connect to the ESX Server. I installed 3 Virtual Machines each running Windows Server 2003 Enterprise Edition. The first DC1 server I set up like the DC with AD, DNS and DHCP, the other two servers called CLR-SVR-1 and/CLR-SVR-2 I have joined to the domain, but did not make them a domain controller. I want to create a 2 cluster nodes, but when I try the installation I get an error message not Quorum shared disk was found, and a second NETWORK adapter is required (although I have 2 network cards installed on the virtual machine).

  I tried to use the vmkfstools to create a floppy disk, but when I turn on the virtual computer, I get an error that I have not used the thick option (I entered this command, vmkfstools thickness - a free - 1 c d G vmfs/volumes/datastore2/CLRDISK/CLR.vmdk, but it didn't work).

  Can someone explain please how to do step by step to someone who knows nothing about Linux or vmware CLI commands commands?

  PLEASE IF ANYONE CAN HELP ME IT WOULD BE GREATLY APPRECIATED. THANKS TO YOU ALL.

  Take a look at http://kb.vmware.com/kb/1004617. This KB links to documentation MSCS he for different versions of ESX. I think the last doc on 4.0 U1 should work for 4.1 as well.

  André

• Virtual machines, run extremely slow when the console is consulted 2 virtual machines Windows Server 2008 64-bit, Windows Server 2003 32-bit, 2 VMWare for virtual machine

  I'm in a difficult situtaition here.  I am the daily contact with a new client.  My linux guy, who is also my boss who is very busy, asked me to do some research trying to find answers for what's not on this server. We have a dual Quad Core 2.5 Ghz Lenovo server with 10 GB of ram.  2 500 GB hard drives are Raid 1.  We run Virtual Server VMWare 2 on a Debian with Gnome installation as a user interface for the side of things Linux.  Grub is the boot loader. There are two virtual machines running on the server.  The one machine that serves as a domain controller is a Windows SBS 2008 Server 64 bit, and the secondary machine has no responsibility domain.  The second machine is a Windows Server 2003 32-bit.  the 10 GB of ram 6 GB is allocated to the SBS server and 4 GB to the 2003 server.

  The problem I am running into is that everything is so slow, especially if I connect remotely to do any sort of administration on the network.  Some examples of issues I've noticed is that as soon as I log on the server via Remote Desktop SBS console management Windows Server spike to 80-95% CPU usage and it will not stop unless I close the management console.  Another instance is that if I open Backup Exec 12.5 on the SBS server it will kill the speed of the processor as well.  Long story short, there are a lot of machine to do what we need to do, but something is not configured right and non of us know what it is.  Another point to note is that the server has been in production for about 3 weeks, and the server seemed to have locked up just twice.  My professional guess is that over time, some chose thing is eating causing the crash of the memory.

  Sorry I do not have much technical insight on this topic, but this is the best I have to offer.  Any questions you all have, I'll ask my people and see if I can answer, but I could really use your help here.

  Thank you in advance,

  Heath

  2 things:

  1 you really need hard drives more than 2 in a RAID 1 for proper performance under load. More disks the better. Although I don't think that's what your problem is, he'll probably be the problem Next you will do.

  2. I don't know exactly where the configuration file is on your box of Debian for VMware Server, but you should consider adding the following options in the configuration file (on windows, it's the vmware 'config.ini'):

  prefvmx.minVmMemPct = "100".

  MemTrimRate = 0

  sched.mem.pshare.Enable = "FALSE".

  mainMem.useNamedFile = "FALSE".

  If you do some research, you can read about what these options (the largest is the memory page sharing - it should only be left on if you have a bunch of similar virtual machines running on the same box, that you don't have.) I honestly know why this is on by default, he kills the CPU when virtual machines are running different operating systems). These are the options that I now use standard in VMware Server deployments, with huge performance increases after you have added the. Just give a try.

  Edit: Also make sure that you have installed in your virtual machines VMware tools.

  Dimitri Rodis

  Integrita Systems LLC

  http://www.integritasystems.com

• part of Windows server 2003 none. X 09-45627

  I lost my cd key for windows server 2003: part No. X 09-45627 how I can get it can mail me on * address email is removed from the privacy *

  Hello

  Note that your computer is under domain, you must contact the TechNet forum, where we are the support technicians who are well equipped with knowledge on the issues of domain, do please visit the link provided below.

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

• updates - updates has not pushed to remote clients (Windows Server 2003)

  original title: critical updates

  Hello

  I have an Windows Server 2003 with Windows XP Pro SP3 clients/members area and allows you to push critical updates for WSUS clients.

  However, updates are not pushed to the remote clients even with the connected VPN tunnel.  The only time updates are pushed to these remote clients is when they visit the office and connect to our LAN.

  Is there a way for remote clients to get their updates without having to remove them as a member of my domain?

  Thank you...

  Forum specific support by WSUS:
  http://social.technet.Microsoft.com/forums/en-us/winserverwsus/threads