Windows Server 2012 R2 Private File Sharing
Hello
Hey Connor,
The question you posted would be better suited in the TechNet Forums; We recommend that you post your question in the TechNet Forums to get help:
Tags: Windows
Similar Questions
-
Shared drive file Windows Server 2012 r2 access VERY slow
Every time I open a file that is located in a shared folder on a drive with r2 Windows Server 2012 (videos and PDF with graphics, in particular), says file takes forever to load, videos often stutter, etc.. This affects all computers connected to the field with access to these shared folders/drive. Is there any solution for this? I couldn't find one so far.
This issue is beyond the scope of this site and must be placed on Technet or MSDN
-
Virtual Windows Server 2012 causes to no file sharing function
I followed several tutorials on Youtube as well as teaching online and so far file sharing does not work on Windows Server 2012 which is be virtualized by VMWare ESXi 5.I don't think he would, but I want to just double check everything. Here's the message I kept getting:
Found this KB KB VMware: shared folder in a virtual machine in Windows 2012 is not accessible on the network hope it solves your problem
-
Windows server 2012 file server slow speed
Dear all,
I use Windows server 2012 as a server file only with 64 GB RAM and 16-core intel Xeon and size of shared file is only 800 GB. problem is that after a few rate of file transfer from client to server got time slowing down as below.
copy data between client to server transfer rate are ok (60 MB/s)
copy data between transfer of client server are low (200 Kb/s)
whenever I rebooted the file server, it worked super fast, but after a few hours I get this question with transfer rate.
can someone help me with this regard.
Noor Uz Zaman
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
PC running XP cannot access shared Windows Server 2012 Essentials
Hello, I'm having a problem with access to files shared on my Windows Server 2012 Essentials on my Dell Inspiron 1100 running XP Pro SP3 I changed all my computers in the workgroup of names to match NetBios servers and all my other computers have access to stocks with the exception of the Inspiron 1100 trying to access in the sharing I am told that I do not have access, I am not offered a prompt to enter a user name and password I am simply denied access. Does anyone know how to get around this problem or fix the issue fact XP and issue with Server 2012 or vice versa. I can access the server to office assistance remotely, but not shared folders which seems strange to me. I've already posted the same question on the TechNet site too since it's a server issue but I find that you can easily post there and receive no help, so that never but I find that almost every subject I posted here, someone has at least made an effort to help with your problem.
In fact, I created a user account on the server and the XP client gave them both the same user name and password and now I have full access to server shares. I have often continue to try while you wait for answers and find my own solution.
-
Can I use ASM / ME to windows server 2012 file server failover clustering?
Hi all
Can I use ASM / ME to windows server 2012 file server failover clustering?
We can use it with exchange, sql, sharepoint,..., but I can't find any document for file server.
Thank you.
HIT / working ME with CSV W2K12/R2, W2K8 CSV volumes cannot bear not to cancel the MAPPING is the main difference. But HITTING / will allow ME to create the active copies and replicas of volumes CSV
Yes the cluster file shares are supported with SUCCESS / me. If you think about it, SQL, Exchange are indeed a "sharing". Because it is an NTFS volume with services that run against her. SQL, Exchange or fileshare services.
-
Sharing the maximum number of folders in windows server 2012
Hello
What is the maximum number of shares that can be set in windows server 2012 (or windows server R2 2012)?
Is there a limit to the number of shares?
This default can be changed (increased)? If so, how?Thank you
LimorThis issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)* -
Thumbnail option does not work in Terminal Server in Windows Server 2012 and server session
This might be a stupid question.
We have two Windows server 2012 R2 - TS and DC. The clients are connecting to TS and access the shared network drives present in DC. I always unchecked 'show icons, never thumbnails' and 'Show thumbnails in System Properties' enabled on DC and the two TS.
No always thumbnail option.
You will need to click on each image. Users have many files containing multiple images. It's annoying to click and view each image.
Note: NO GPO is configured to block it. Checked.
I can't find any object GPO to allow this option to be :)
More info. For customers, anywhere, whether network shares or all folders in TS session. It does not work. Also tried painting and Windows Photo Viewer.
Here, any help will be very appreciated!
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
I get this question during the Oracle 12 c Installer (Windows Server 2012) Network Infrastructure:
[INS 32148] The execution of the script "Install IM" on the nodes failed: [node2]
--------------------------------------------------------------------------------------------------
Action - review the log to the file "C:\Program Files\Oracle\Inventory\logs\installActions2016-02-16_02-19-24AM.log" and 'C:\App\12.1.0\grid\cfgtoollogs\crsconfig\rootcrs_ < nodename > _ < timestamp > .log' for more details if an error occurs. More details
Execution of the IM installation script is successful on the nodes: the GI run script install [nodeX1] is has failed on the nodes: [nodeX2] - PRCZ-2014 Exception details: cannot run the "C:\App\12.1.0\grid\crs\config\gridconfig.bat" command on the nodes 'nodeX2 '.
The execution status of the node failed: nodeX2
Errors
: Using the configuration settings file: C:\App\12.1.0\grid\crs\install\crsconfig_params|2016/02/18 05:08:54 CLSRSC-4000: Oracle Trace File Analyzer (TFA) collector is not supported on this platform. | [0 m: 2016/02/18 05:08:59 CLSRSC-363: prerequisite user during installation ignorered |] [0 m | 5:09:04 > Started | 5:09:04 > arguments 2 | 5:09:04 > C:\App\12.1.0\grid\bin\crssetup.exe | 5:09:04 > installFence | 5:09:04 > WARNING: failed to remove imagePath, continues.] The operation completed successfully. | | 5:09:04 > return 0 x 02016/02/18 05:10:42 CLSRSC-507: the root script cannot continue on this nodeX2 node because node operations have not completed the nodeX1 node or there was an error in obtaining the status of the operations of the first node. | [0 m |] D. in C:\App\12.1.0\grid\crs\install/crsutils.pm line 3691.
Standard output
: Using the configuration settings file: C:\App\12.1.0\grid\crs\install\crsconfig_params2016/02/18 05:08:54 CLSRSC-4000: Oracle Trace File Analyzer (TFA) collector is not supported on this platform. [0 m 18/02/2016 05:08:59 CLSRSC-363: prerequisite ignorered user during installation [0 m 05:09:04 > started at 05:09:04 > arguments 2 05:09:04 > C:\App\12.1.0\grid\bin\crssetup.exe 05:09:04 > installFence 05:09:04 > WARNING: delete imagePath, continuous failed.]] The operation completed successfully. 05:09:04 > return 0 x 02016/02/18 05:10:42 CLSRSC-507: the root script cannot continue on this nodeX2 node because node operations have not completed the nodeX1 node or there was an error in obtaining the status of the operations of the first node. [0 m died at C:\App\12.1.0\grid\crs\install/crsutils.pm line 3691.
--------------------------------------------------------------------------------------------------
Anyone know?
Thank you very much in advance
Hello
Why do you have the disks with different names and of different sizes?
Node1:
C:\Users\Administrator\Desktop\grid\asmtool>asmtool-Liste
ORCLDISK1 \Device\Harddisk1\Partition1 51197 M
ORCLDISKDATA0 \Device\Harddisk2\Partition1 M 30717
ORCLDISK3 \Device\Harddisk3\Partition1 M 30717
Node2:
C:\Users\Administrator\Desktop\grid>asmtool-Liste
ORCLDISK1 \Device\Harddisk1\Partition1 51197 M
ORCLDISK2 \Device\Harddisk2\Partition1 M 51197
ORCLDISK3 \Device\Harddisk3\Partition1 M 51197
People should be equal disks are shared, aren't they?
Kind regards
Marco
-
Install OfficeJet Pro 8610 on Windows Server 2012
Hello
I'm trying to install the drivers for a Pro OfficeJet 8610 on a system running Windows Server 2012. I installed the drivers from here (after choosing Windows 2012 for the operating system): http://support.hp.com/us-en/drivers/selfservice/HP-Officejet-Pro-8610-e-All-in-One-Printer-series/53...
First of all, I tried to install using the GUI (Setup.exe) but ran into an error indicating that the operating system was not compatible.
I did some research and discovered that these drivers must be installed by using the command line and the command msiexec.exe. I tried to do it by using the following command-line (with administrator privileges): msiexec.exe /i PATHTOMSI
However, when I do that, it gives me ALWAYS an error of incompatible operating system. Don't know what to do here.
Here is a link to the Post on the HP Forum explaining the need for a command line install: http://h30434.www3.hp.com/t5/LaserJet-Printing/installing-Pro-8610-Windows-server-2008rt-X64/m-p/426...
Thank you.
I ended up soliving this problem myself while tinkering around.
I went through the process of adding a new printer through the devices window and printers.
I said my printer was not listend so opted to manually configure a printer. I have created a new local port and he just called the name of the printer. He then invited for drivers. I chose the disc and then navigated to the folder where I had extracted the printer drivers. Selected this file and the drivers installed.
This example gets the drivers installed in the system. Windows should then automatically recognize/install the printer if it is plugged.
Mind you, I had to do that only for printing on a desktop connection remote. If you need the real HP software installed to print AND scan, this will not work for this.
-
DPM 2007 and windows server 2012
32 bit System Center dataprotection manager 2007 can use windows server 2012?
I installed the recommended updates - file DataProtectionManager2007-KB959605 and x86_DataProtectionManager2007-KB970868, but I can't install dpm on windows server agent 2012
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
Or here at TechNet Data Protection Manager - File Protection:
https://social.technet.Microsoft.com/forums/en-us/home?Forum=dpmfilebackup
TechNet forums of Data Protection Manager.
https://social.technet.Microsoft.com/forums/en-us/home?Forum=dataprotectionmanager
See you soon.
-
Help error Robocopy Windows Server 2012!
Hi, I use Robocopy on Windows Server 2012 but when I run my command "robocopy
/e/b /ZB /DCOPY:T /COPYALL /R:20 /W:5 /TEE /LOG:Robocopy1.log /V" I recived the following error ERROR 32 (0x00000020) copying NTFS security to Destination directory
-
One user away from the dashboard of the range Windows Server 2012 R2 Essentials
We migrated from SBS 2008 for Windows Server 2012 R2 Essentials range. All users and computers have successfully migrated and their list is visible in the ADUC.
However, a user is missing from the Windows Essentials Dashboard (users in the navigation bar, tab users).
The user can work normally: connecting to Active Directory, it can see shared folders and so on. But it is not in the list above. Because of this, it cannot be administered in the dashboard (for Windows Server Essentials).
What can be the problem? How can get us in the list? What other information should we supply for you to find the answer?
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
Sha1sum/MD5 for test of Windows Server 2012 R2 Essentials
I try to install the above https://www.microsoft.com/en-us/evalcenter/evaluate-windows-server-2012-r2-essentials version, file name
9600.16384.WINBLUE_RTM.130821 - 1623_X64FRE_SERVER_SOLUTION_EN-US-IRM_SSSO_X64FRE_EN-US_DV5. ISO.
When attatching the DVD in virtual box, I make mistakes (below for reference) but I can't seem to find a sha1sum or md5 of this file, anyone can provide one?
VirtualBox errors:
Unable to get the storage format of the middle ' / Users/rparks/Downloads/9600.16384.WINBLUE_RTM.130821-1623_X64FRE_SERVER_SOLUTION_EN-US-IRM_SSSO_X64FRE_EN-US_DV5. ISO' (VERR_NOT_SUPPORTED).
Result code:
VBOX_E_IPRT_ERROR (0X80BB0005)
Component:
MediumWrap
Interface:
IMedium {4afe423b-43e0-e9d0-82e8-ceb307940dda}
Called:
IVirtualBox {0169423f-46b4-cde9-91af-1e9d5b6cd945}
Called RC:
VBOX_E_OBJECT_NOT_FOUND (0X80BB0001)
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
Windows Server 2012 R2, R2 2008 update 12/08/2015 disabled asp classic download
I have a Windows Server 2012 R2 and Windows Server 2008 R2 running native IIS.
The web server allows downloading files using just classic asp... no plug-ins or third-party add-ins.
The two servers installed updates 09/12/2012 off the capacity of the web server to download files using classic asp. The base for the download method was created by freeaspupload.net, who has since disappeared.
I rolled back these updates and downloading files works again.
I can't be the only one stuck with a legacy application that needs this feature.
Anyone?
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
Maybe you are looking for
-
From here to the United Kingdom, I placed an order on the site Apple.com for an iPadPro more coverage and paid with my credit card of the United Kingdom. It was a gift and I wanted it to be delivered to my brother in San Diego, the order went through
-
YouTube xl does not work on Toshiba WL863
I noticed recently that my youtube in toshiba application places now does not work!I thought it would be a software issue, so I checked to see if my software needed an update, but it says that I have no update! I liked the youtube app on my tv so ple
-
HP 430: administrative password BIOS
I entered the wrong password several times and the code that appeared is 62834084. Can someone help me with the password I need to enter to successfully enter the BIOS options?
-
PILOT BLUETOOTH TO HP 2000 2116TU WITH THE HELP OF WINDOWS 8.1 ENTERPRISE 64-BIT
I TRIED ALL THE OLD DRIVERS BLUETOOTH IN WINDOWS 8.1, BUT ALL HAVE COMPATIBILITY PROBLEMS AND DOES NOT. IN COMPATIBILITY TROUBLESHOOTING I TRIED ALL VERSIONS OF WINDOWS (FROM WINDOWS XP TO WINDOWS 8) BUT NONE WORK.WHERE IN THE PREVIOUS WINDOWS 8 (64-
-
Offset of DirectX 10 problem mouse
Hi, I am running Windows 7 Home Premium 64-bit edition. I have an Intel i7 940, 12 GB of ram and a 250 of nvdidia graphics card. My problem with DirectX 10 games running. When I run a game like Crysis for example. my mouse is actually down and to the