Windows server 2012 file server slow speed

Similar Questions

• Shared drive file Windows Server 2012 r2 access VERY slow

  Every time I open a file that is located in a shared folder on a drive with r2 Windows Server 2012 (videos and PDF with graphics, in particular), says file takes forever to load, videos often stutter, etc.. This affects all computers connected to the field with access to these shared folders/drive. Is there any solution for this? I couldn't find one so far.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Windows Server 2012 slow on ESXi 5.1U1

  Dear jury,

  recently, I installed four Windows Server 2012-VMs on my ESXi. It's a HP DL380G7 (Controller-P410i HP Xeon E5645, 144 GB of RAM, with 8 HP - SAS 500 GB in RAID6).

  All four virtual machines have a very poor performance, SMB video speed, slow slow.

  I have a server 2008R2-Windows on the same host, which are very good. If I copy a file (for example an ISO) of my client to the server, I have about 80 MB/s. If I do the same in one of my 2012 server, I get about 20 MB/s or less. Sometimes the process cancels (destination network not found)... Still the same thing if I copy between virtual machines. When the copy of CPU consumption amounts to 70%, sometimes at 100%, the server is not usable this time.

  What I've done and tested:

  * 2012 Server installed by the standard ISO (MS Action Pack-download)

  * fact update ESXi 5.1 to 5.1U1 and updated on all virtual machines VMWare tools

  * change to VMXNET3 E1000E network card

  * disabled SMB signing

  * changed SVGA drivers for MS-display Standard driver (3D acceleration is grayed out in the VM options!)

  * Settings IP of all virtual machines are ok (DHCP)

  All the 2008R2 works well, all 2012 are very slow...

  What can I check or what I got wrong?

  TIA and greetings from the Germany

  Matthias.

  It's weird,

  As I did the day 1 for my ESXi5.1 update I upated the VMWare tools on all virtual machines as well. Every server 2008R2 did a restart and they are always very good. 2012 servers did not reboot after update the VMWare Tools. Today, I did a restart of all my servers from 2012 and voila, 3 out of 4 are very good. Running quite smooth with 80 to 100 Mbps SMB-Performance! GREAT!

  Just a virtual machine is too slow I started... But this one I will get in shape too, I think that...

  Display 3D even drivers are fine now.

  Best regards

  Matthias.

• Windows Server 2003 R2 vs. 2008 R2 vs. 2012 as a file server

  I use Windows Server 2003 R2. We have about 100 PCs that are connected to this server and using the network connection. We are planning to upgrade to the latest version. While I was looking for the comparison between Windows Server 2003 R2, R2 2008 and 2012.

  All items talk about new features like Hyper-V, Hyper v Replica, Active Directory, IIS etc. But I'm not using one of these. I mainly use it as a file server. So, I need to know the comparison of features related to it.

  How are the 3 versions different server?

  I heard that data deduplication is main feture of windows server 2012.Does it only reduce the file size when it is in drive? Or he gets advantage for network traffic when he copied the complete network of another way? Fact that these data are supported in windows XP in network

  Hello

  Support for Windows Server is not provided in these forums. On the other hand, it please repost your question in the relevant Microsoft TechNet forum here:

  http://social.technet.microsoft.com/Forums/en-us/category/windowsserver .

  Thank you.      :)

• Setup of Windows Server 2012 cannot find a place to store temporary files

  I am trying to upgrade Windows 2008 R2 DataCenter Windows Datacenter of 2012

  I use the image en_windows_server_2012_x64_dvd_915478.iso - unpacked on C:\ or engraved on DVD

  DVD - upgrade is not allowed and I am referred to operation of installation of Windows 2008

  At the start of upgrade, I get the blue screen with 'Install now' followed by not referred to the Microsoft forums several times:

  Windows Setup cannot find a place to store temporary files... Error code: 0 x 80070490

  There is a lot of space in Windows 2008 records, also on the startup disk, I created a large partition (16 GB) just in case where.

  It does not help.

  All messages on this problem - I didn't yet have those associated with AHCI - not sure the relevance/importance.

  The material is an old IBM Intel Xeon 3 GHz 64-bit server.

  Any idea is welcome

  Support is located in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Can I use ASM / ME to windows server 2012 file server failover clustering?

  Hi all

  Can I use ASM / ME to windows server 2012 file server failover clustering?

  We can use it with exchange, sql, sharepoint,..., but I can't find any document for file server.

  Thank you.

  HIT / working ME with CSV W2K12/R2, W2K8 CSV volumes cannot bear not to cancel the MAPPING is the main difference.  But HITTING / will allow ME to create the active copies and replicas of volumes CSV

  Yes the cluster file shares are supported with SUCCESS / me.    If you think about it, SQL, Exchange are indeed a "sharing".   Because it is an NTFS volume with services that run against her.  SQL, Exchange or fileshare services.

• Virtual Windows Server 2012 causes to no file sharing function

  I followed several tutorials on Youtube as well as teaching online and so far file sharing does not work on Windows Server 2012 which is be virtualized by VMWare ESXi 5.I don't think he would, but I want to just double check everything. Here's the message I kept getting:

  

  Found this KB KB VMware: shared folder in a virtual machine in Windows 2012 is not accessible on the network hope it solves your problem

• Windows Server 2012 does not seem to recognize the space between the program and files

  I installed 'R' in D:\Program Files.
  Then I need to install another application that must refer to this path and validate during its installation. Installation of the next application saying that there is a "Invalid Version of R.

  If I install R in the following directories, it is recognized and my next application installed successfully:
  C:\Program Files
  Files S:\Program
  D:\R

  Windows Server is not recognize the R application properly installed in "D:\Program Files." Windows runs into the space between "Program" and "Files" and put an end to the execution of this order.

  The application I am trying to install the message 'Invalid Version of R' returns because he can't run the command check correctly. Because nothing is returned from the R.exe, he is unable to continue. This issue seems to be related to Windows and once R.exe can be run correctly D:\Program files, I would expect demand to continue to install. Is anyway getting D:\Program Files to be recognized as the other 3 directories I mentioned?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Windows Server 2012 R2 Private File Sharing

  Hello

  I have a Windows Server 2012 R2 with experience Essentials that I use for my home.  I would like to configure the server so that my family and I can access the contents of all the job server and connect to home via Office at distance as well. How would I do that? All my computers at home running the version of windows 7 and 8 lay, so I can't use a domain.  I understand that I may access to any where, but I understand that in the installation of the role of the experience of Essentials, you must configure a domain.
  I appreciate the help and can provide all the necessary information.

  Hey Connor,

  The question you posted would be better suited in the TechNet Forums; We recommend that you post your question in the TechNet Forums to get help:

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer&filter=AllTypes&sort=lastpostdesc

• Adobe Reader DC contains errors and crashes with Windows Server R2 2012

  We have recently installed Adobe Reader DC Adobe version on our servers Windows Server R2 2012 and have problems since its launch. Few of the questions that we have seen are as follows:

  1. This version is a little awkward and crashes.
  2. A lot of pop up boxes that appears whenever I open a document.
  3. Whenever I open a document it is a box pop up welcome
  4. It is a little slow to respond between clicks
  5. If I click on options like file. The application hangs and then crashes. (see crash message attachment)

  Any help to solve this problem would be useful.

  Thank you

  
  

  Questions for users confronted with this question:

  1. do you have the preview pane enabled in file Explorer? If so, you can temporarily disable it to see if the problem goes away? On Windows 8, in Explorer, go to the view tab, and if you press the button "Preview Pane", UN-press it. On Windows 7, upwards to the right (to the left of the help icon) there is a button "show preview pane." UN-press it.

  2. ensure that the following directories exist on your machine. If this isn't the case, please create them:

  C:\Users\USERNAME\AppData\Local\Adobe\Acrobat\DC\ToolsSearchCacheAcro

  C:\Users\USERNAME\AppData\Local\Adobe\Acrobat\DC\ToolsSearchCacheRdr

  Replace USERNAME with your username.

  Is - do this 1 or 2 to solve this problem?

• Virtual machines, run extremely slow when the console is consulted 2 virtual machines Windows Server 2008 64-bit, Windows Server 2003 32-bit, 2 VMWare for virtual machine

  I'm in a difficult situtaition here.  I am the daily contact with a new client.  My linux guy, who is also my boss who is very busy, asked me to do some research trying to find answers for what's not on this server. We have a dual Quad Core 2.5 Ghz Lenovo server with 10 GB of ram.  2 500 GB hard drives are Raid 1.  We run Virtual Server VMWare 2 on a Debian with Gnome installation as a user interface for the side of things Linux.  Grub is the boot loader. There are two virtual machines running on the server.  The one machine that serves as a domain controller is a Windows SBS 2008 Server 64 bit, and the secondary machine has no responsibility domain.  The second machine is a Windows Server 2003 32-bit.  the 10 GB of ram 6 GB is allocated to the SBS server and 4 GB to the 2003 server.

  The problem I am running into is that everything is so slow, especially if I connect remotely to do any sort of administration on the network.  Some examples of issues I've noticed is that as soon as I log on the server via Remote Desktop SBS console management Windows Server spike to 80-95% CPU usage and it will not stop unless I close the management console.  Another instance is that if I open Backup Exec 12.5 on the SBS server it will kill the speed of the processor as well.  Long story short, there are a lot of machine to do what we need to do, but something is not configured right and non of us know what it is.  Another point to note is that the server has been in production for about 3 weeks, and the server seemed to have locked up just twice.  My professional guess is that over time, some chose thing is eating causing the crash of the memory.

  Sorry I do not have much technical insight on this topic, but this is the best I have to offer.  Any questions you all have, I'll ask my people and see if I can answer, but I could really use your help here.

  Thank you in advance,

  Heath

  2 things:

  1 you really need hard drives more than 2 in a RAID 1 for proper performance under load. More disks the better. Although I don't think that's what your problem is, he'll probably be the problem Next you will do.

  2. I don't know exactly where the configuration file is on your box of Debian for VMware Server, but you should consider adding the following options in the configuration file (on windows, it's the vmware 'config.ini'):

  prefvmx.minVmMemPct = "100".

  MemTrimRate = 0

  sched.mem.pshare.Enable = "FALSE".

  mainMem.useNamedFile = "FALSE".

  If you do some research, you can read about what these options (the largest is the memory page sharing - it should only be left on if you have a bunch of similar virtual machines running on the same box, that you don't have.) I honestly know why this is on by default, he kills the CPU when virtual machines are running different operating systems). These are the options that I now use standard in VMware Server deployments, with huge performance increases after you have added the. Just give a try.

  Edit: Also make sure that you have installed in your virtual machines VMware tools.

  Dimitri Rodis

  Integrita Systems LLC

  http://www.integritasystems.com

• HP Color LaserJet 4600 PS: Driver HP Color LaserJet 4600 PS printer Windows Server R2 2012 problem

  Hello team HP,

  We used the driver 32 bit printer "HP Color LaserJet 4600 PS" to write the PDF file using Acrobat Distiller in Windows server 2003 operating system.

  But now, we have migrated our production environment for Windows Server 2012 R2 64-bit operating system and using the 32-bit printer "HP Color LaserJet 4600 PS" driver in the operating system Windows Server 2012.

  Is the driver support 32 bit printer "HP Color LaserJet 4600 PS" Windows Server 2012 R2 64-bit operating system?

  If it is not supported then what printer driver will support the Windows Server 2012 R2 64-bit operating system?

  Help us to this problem as soon as POSSIBLE and its very high priority for us.

  Kind regards

  Gaudin. B

  Hello

  CLJ 4600 is not supported on Windows Server 2012. However, you can use HP Universal Print Driver (UPD) for print on CLJ 4600 of Win Server 2012.

  Here is a list of the printers supported with the UPD: http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c04324001#N106AD

  Specification of the UPD: http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c04380141

  Thank you

• Install OfficeJet Pro 8610 on Windows Server 2012

  Hello

  I'm trying to install the drivers for a Pro OfficeJet 8610 on a system running Windows Server 2012. I installed the drivers from here (after choosing Windows 2012 for the operating system): http://support.hp.com/us-en/drivers/selfservice/HP-Officejet-Pro-8610-e-All-in-One-Printer-series/53...

  First of all, I tried to install using the GUI (Setup.exe) but ran into an error indicating that the operating system was not compatible.

  I did some research and discovered that these drivers must be installed by using the command line and the command msiexec.exe. I tried to do it by using the following command-line (with administrator privileges): msiexec.exe /i PATHTOMSI

  However, when I do that, it gives me ALWAYS an error of incompatible operating system. Don't know what to do here.

  Here is a link to the Post on the HP Forum explaining the need for a command line install: http://h30434.www3.hp.com/t5/LaserJet-Printing/installing-Pro-8610-Windows-server-2008rt-X64/m-p/426...

  Thank you.

  I ended up soliving this problem myself while tinkering around.

  I went through the process of adding a new printer through the devices window and printers.

  I said my printer was not listend so opted to manually configure a printer. I have created a new local port and he just called the name of the printer. He then invited for drivers. I chose the disc and then navigated to the folder where I had extracted the printer drivers. Selected this file and the drivers installed.

  This example gets the drivers installed in the system. Windows should then automatically recognize/install the printer if it is plugged.

  Mind you, I had to do that only for printing on a desktop connection remote. If you need the real HP software installed to print AND scan, this will not work for this.

• DPM 2007 and windows server 2012

  32 bit System Center dataprotection manager 2007 can use windows server 2012?

  I installed the recommended updates - file DataProtectionManager2007-KB959605 and x86_DataProtectionManager2007-KB970868, but I can't install dpm on windows server agent 2012

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  Or here at TechNet Data Protection Manager - File Protection:

  https://social.technet.Microsoft.com/forums/en-us/home?Forum=dpmfilebackup

  TechNet forums of Data Protection Manager.

  https://social.technet.Microsoft.com/forums/en-us/home?Forum=dataprotectionmanager

  See you soon.

• Thumbnail option does not work in Terminal Server in Windows Server 2012 and server session

  This might be a stupid question.

  We have two Windows server 2012 R2 - TS and DC. The clients are connecting to TS and access the shared network drives present in DC. I always unchecked 'show icons, never thumbnails' and 'Show thumbnails in System Properties' enabled on DC and the two TS.

  No always thumbnail option.

  You will need to click on each image. Users have many files containing multiple images. It's annoying to click and view each image.

  Note: NO GPO is configured to block it. Checked.

  I can't find any object GPO to allow this option to be :)

  More info. For customers, anywhere, whether network shares or all folders in TS session. It does not work. Also tried painting and Windows Photo Viewer.

  Here, any help will be very appreciated!

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.