Windows server backup problem

Similar Questions

• Windows Server backup - Reporting failure, but creates a backup file

  Currently have a Server 2008 R2 running. Also runs Hyper-V with 3 than VMS. VM can be found on the D drive, so I have given up trying to save with C, since it was time.

  I don't have a setup of daily - just VSS full backup disk Local (c), no bare metal recovery or backup the system state. It's backup on a network drive shared on a different server.

  Daily backup status comes back as having failed. However when I go to the destination that the backup must be going, I see a 280 GB VHD file, which is the size expected to see.

  The error reported in the Windows Server backup is "one of the backup files could not be created. "Error: the parameter is incorrect".

  WSB is horrible to provide crash reports useful on what is the real problem.

  Anyone have any idea why it's create a large file of backup, but reported as having failed with this error?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Windows Server backup failed

  Hello

  We have a problem with our Windows Server backup on our main server. It fails every night and you see disks (5 discs for each day from Monday to Friday) to be offline, even if we can access the data and restore files/folders. We tested another software to backup with one of our readers, and he was properly executed. The event log shows error event ID 561 and 546 "...". the backup failed as no target could be found... "Any ideas what is the cause? As I have said that we ran successfully backup by using one of the players and another software so I don't think it's a hardware problem.

  Thanks in advance

  K8

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Windows server backup - standard SP2 FE

  Hi, I am currently using the standard version of SP2 of FE.
  I'm trying to do a windows server backup program for my server, but are struggling now.
  I'm going to administrative tools-> windows server backup-> action-> backup-> next Scheduling Assistant->

  now my problem is-> fact that backup version to a network drive support? because I don't have a lot of free space left in the local drive.
  I KNOW R2 has an option to choose backup to local drive or network drive.  but in FE I cannt find it.
  Can you help me? THX...

  Windows Server forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Cannot initialize the Windows Server backup on Server 2008 R2

  Hello

  I searched around for a bit now to try to find a solution to my mistake, but so far have turned up empty-handed.

  Operating system: Windows Server 2008 R2

  Objective:
  To obtain Windows Server Backup works then I can start my server backups.

  Problem 1:
  When you try to start Windows Server Backup through Server Manager interface, I'm greeted with the following error:

  A fatal error occurred during an operation of the snap-in (wbadmin.msc) Windows Server backup.
  Error details: Server execution failed

  Close wbadmin.msc and then restart it.

  Outcome 1: Looking Me wbadmin Gets the #2 problem...

  Problem 2:
  Apparently, block level backup engine server was not active.  When you try to start the block level backup engine Service, I get this:

  Windows could not start the service block level Backup Engine Server on the Local computer.
  0x800700b7 error: cannot create a file when that file already exists.

  Outcome 2: No idea where to go from here.

  Problem 3:
  Open the cmd prompt as administrator, I type in what follows to see what I get: net start wbengine

  And get...

  The block level backup engine Service service starts.
  Block level backup engine Service service could not be started.

  A system error has occurred.

  183 system error has occurred.

  Cannot create a file when that file already exists.

  Result 3: No idea how this started.

  So, I find myself thinking about the following: block level Backup Engine Server must be running in order for wbadmin work properly.  However, as I can't start the WBEngine, it is here where I am currently.

  If someone has an idea or could tell me what I should do to get this working, it would be greatly appreciated.  I can give more information if necessary.

  Thank you.

  Here is the Vista Forums.

  http://www.Microsoft.com/windowsserver2008/en/us/community.aspx

  Community Server at the link above.

  http://www.Microsoft.com/windowsserver2008/en/us/forums-blogs.aspx

  Link to forums.

  See you soon. Mick Murphy - Microsoft partner

• previous versions of files available for recovery "windows server backup.

  I use "windows server backup" to back up my Windows Server 2008R2 and R2 for Windows Server 2012 boxes.

  Using the graphical user interface of 'windows split backup', I can:

  o search the various backups on disk

  o down through the tree of a given instance of a backup to disk

  o select a single file to retrieve

  I want to watch all instances of a file that do not exist to recover.  This feature is available in 'windows explorer' by the 'previous versions' tab.  How can I get this same 'previous versions' ability via the 'windows server backup"collect mistletoe?

  Are there other utilities (other that the 'windows server backup"recover gui) that allow me to browse the catalog of backup?

  Is it possible to browse the catalogue using the powershell cmdlets?

  Thank you

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Windows Server backup question!

  I need help.  I'm a guy from Server 2008R2 novice who tries to save not only the server (which I did successfully with Windows Server backup), but a shared external hard drive connected to one of my office workstation computers (it has information vital to back up as well).  The documentation for Windows Server Backup to a google search says "You can use Windows Server backup to create and manage backups for the local computer or a remote computer".  How to create a backup to (not) a remote computer?

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Windows XP Backup problem, cannot find the backup utility

  original title: windows xp backup problem

  I have a system with windows xp, I tried to backup the drive c: to the top, when I click on start, all programs, accessories, System tool, I see how to do anything else but up... i back cant find utility backup click on... then save my c: drive?

  Hello

  I suggest you follow the steps mentioned in the article given below to install windows on the system backup.

  How to install backup from the CD-ROM in Windows XP Home Edition

  http://support.Microsoft.com/kb/302894

  Also, I suggest you return the article mentioned below to learn how to use the backup utility.

  How to use the backup utility to back up files and folders in Windows XP Home Edition

  http://support.Microsoft.com/kb/320820

• How Windows Server backup and command-line tools are used in the installation of vCSHB?

  How the Windows Server backup and command-line tools are used during the installation of vCSHB?  It takes in all types of deployments (PtoV, VtoV, PtoP)? It is used to create files that are put in file sharing for the second node to use during the installation of vCSHB or is it only used during a clone of vCSHB of a physical to physical deployment operation?  These tools are not used in some deployments?

  You need backup Windows Server installed on the source and destination, and during the installation of vCSHB the installer will call the wbadmin (Windows Server Backup Utility) and will save the configuration and application data (application data is optimal, but can reduce the synchronization time after the installation of the secondary node). On the secondary node you will should only run the vCSHB Installer and everything will be restored.

  Check this blog entry for some info on P2P deployment issues: http://www.vcoportal.de/2013/12/vmware-vcenter-server-heartbeat-restore-on-a-second-node-a-journey/

• Installation of Windows Server 2012 problem

  I tried with different configurations, install Windows Server 2012 as operating system prompted but still got the error attached.
  Someone knows why?

  Hello and welcome to the communities.

  What version of VMware Player are you using?

• Windows 7 backup problem

  Hello

  I put Windows 7 up to the top for the first time.  I used an external hard drive.  I am a beginner and I have a few questions, but also a problem that I need help.

  First my questions

  (1) I put in place by selecting "Let Windows choose."  Then I put the calendar to save "Every Sunday at 21:00."  Does this mean that it will create a weekly backup of the image of the system as well?

  (2) for scheduled backups happen, what I need to be logged on my Windows user account, or it will still too long my computer is on (for example, if another Windows user account is connected, but mine isn't).

  (3) what happens if I am connected to my Windows user account, and the power kick in his mode settings "sleep."  Always, it will automatically make a backup as expected?  Or I have to wake up manually my computer "sleep" for the start of the backup?

  Now my problem

  Before today, was the date then "backup" 2015/01/03 21:00.  So he must have created backups last night.  But my external hard drive only shows backups (which are dated) the first time I put up using "save now."  Yet, the "Backup and Restore" window says "last backup: 03/01/2015 23:33.»  But there are no files with the date 03/01/2015.  What should I do?

  Any help or advice would be much appreciated.

  Thank you

  Hello

  Welcome to the Microsoft community. I will certainly help you to anxiety. To answer your questions, I want to refer to a few items of Microsoft for backup and restore.

  I suggest you consult the following Microsoft Articles:

  Backup and restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/backup-and-restore

  Backup and restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows/back-up-restore-FAQ#1TC=Windows-7

  Restore files from a backup

  http://Windows.Microsoft.com/en-us/Windows/restore-files-backup#1TC=Windows-7

  Additionally, this problem may arise when the date and time is set wrong.

  Follow the steps below to change the time zone.

  1. right click on the clock, at the far right of the taskbar and click on adjust Date/time.
  Or
  2. left click on the clock, at the far right of the taskbar and click change date and time.
  3. click on the button to change time zone.
  NOTE: If you want to be alerted with a notification bubble when the clock changes, then check the Notify me when the clock changes box.
  4. click on the drop-zone, and then select your time zone.

  NOTE: If your country or region is not in the zone list Windows, then you can use the equivalent time zone according to the chart here:
  How to select the time zone for the countries or regions that are not listed in the list of Windows time zone http://support.Microsoft.com/kb/977110/en-us

  5 check the option adjust the clock for the heurecase.
  NOTE: It is recommended to have this review to keep you accurate system for summer time clock.
  6. click on OK

  Set the clock http://Windows.Microsoft.com/en-us/Windows7/set-the-clock

  Please go through the articles provided that you will get all information y. hope that this information has been useful.

• ISE 2.0 Server backup problem

  Hi guys

  I'm trying to implement backup-TFTP to an ISE 2.0, but the TFTP entry does not appear in the repository list, once I configured it.

  Does anyone else have this problem?

  I also had problems with FTP backups. The repository is configured and healthy air. The backup starts, runs for 5 minutes while getting progressively to 80% and fails. Newspapers reported simply that there so I don't know why he did it.

  Any suggestions?

  Cisco Identity Services engine

  ---------------------------------------------

  Version: 2.0.1.130

  Build Date: Kills Mar 3 02:38:48 2016

  Installation date: Wednesday 25 May 22:44:10 2016

  Thank you

  m

  You want to confirm that the user that is configured for the repository has rights to write to the FTP server.

  Javier Henderson

  Cisco Systems

• The cold on windows Server backup

  Hi all;

  OS: Windows
  DB: 10.2.0.3

  I'm trying to schedule a backup to cold, I was wondering if I can just oracle database service down and then directly copy files by using the copy command, and after completion of the copy of the files I will until oracle services.
  Will this method work, I can't test the same thing that I do have access to the server right now.

  Kind regards
  Sphinx

  Yes, you can, by default, the service will run an IMMEDIATE STOP. To do this, look at named something like registry keys

  HKEY_LOCAL_MACHINE\SOFTWARE\Oracle\KEY_OraDb12c_home1\ORA_ORCL_SHUTDOWN

  HKEY_LOCAL_MACHINE\SOFTWARE\Oracle\KEY_OraDb12c_home1\ORA_ORCL_SHUTDOWNTYPE

  and you will see the settings.

  --

  John Watson

  Oracle Certified Master s/n

  http://skillbuilders.com

• Windows 7 backup problems

  I've been back up my windows 7 for a year and I noticed that the history of the backup load is quite different each time, from 10.3 GB 96KO and back to 10 GB to 7.97gGB (backup every 4 months) I read load backup all changes to files/charge etc. Only!

  I clear the load every time on my USB and load the current backup. (should I keep the current and add an additional backup to the same flash drive?)

  I tried to do a full backup with flash drive but Windows 7 will this full backup with CD only. (Is their a way to make a backup complete using a flash drive?)

  I read that Windows 7 does a full backup on all first download and then will make "Incremental" backups and there still going to do a full backup use in the future.

  Can you advise when a full backup should be available for the backup in Windows?

  Any information would be sincerely appreciated!

  Roy

  Theres a backup system that is the whole of your PC and there is a backup of the data, that is, as it says, just the data

  You apear to use backup of data and this is progressive, that is to say after the first backup, it adds only the changed files.

  So if you delete the previous backup, you can then restore your data.

  Buy an external drive for backup use, do not use a USB

• Windows Server 2008 R2 with Exchange of HDD replaceable hot backup?

  I have a server that is running Windows Server 2008 R2 with 4 exchangeable to hard drives hot.  3 250 GB disks and configured in RAID 5.  The 4th 1 TB hard drive and used for the backup.  With capabilities to warm the intention was to use the 4th hard drive as a player traded for backup purposes, put the inactive disks in a vault without danger for the security and protection.  Unfortunately I was able to configure Windows backup software to recognize the multiple backup drives.

  I hope that someone is aware of this problem and knows how to solve.  If yes I would appreciate to hear your solution.

  Thanks in advance

  Harry Myers

  Hi Harry,.

  I would recommend reposting in our forum Technet Windows Server Backup, where one of the experts in this area would be better suited to offer you a solution.