WINDOWS SERVICES ERROR

Similar Questions

• HP Laserjet M277dw MFP: HP Laserjet Pro M277dw - low memory/job cancelled MFP & 49 WINDOWS service error

  Ok.  I've seen other messages with this error.  But I think mine is a little different.

  The problem: Prnter will not print anything at all, even a test page.  It will not copy anything either.  Low memory - cancelled job message comes up / have worked perfectly for 2 days, and then it started.

  Printer is connected via the network (wired), but I have tried wireless also.

  Software is installed on a machine windows 10.

  In addition to the windows machine, print requests are sent to her through the network via an iPad and an iPhone.  HPeprint is also used.

  Troubleshooting: I did the following in trying recify problem:

  Printer disconnected everything on during 30 seconds.

  Reset the default printer

  Redid the installation of the network via the touch screen

  Deleted printer in windows and deleted driver packages.  Reinstalled using the supplied software.  Also tried to install using "add a printer" in windows.

  Possible corrections that do not go to work or to me:

  Put in place as a printer IP - he loses the feature and choose but in addition to the drivers manually to scan etc...

  Connect via USB to the computer - if I do this do not lose the ability for the iPad and iPhone to print on the printer - or at least makes this dependant on the computer is turned on and sharing put in place

  I will say that after I tried to implement the prnter using "add a printer" in windows, I couldn't get the printer to print the test page - nothing happened, but did not get the memory error message.  I removed from the print queue and even deleted all the files in the subdirectory of coils in system32...  ButI cannot get rid of the printer now under "devices and printers" in the Panel...

  Help, please!  Pulling left what my hair on...

  Thank you

  THIS PROBLEM HAS BEEN RESOLVED.

  After several weeks of rtying many different things to fix problems

  (1) after installing the new modem Arris double band by carrier Internet, printer would no longer.  First issue was an error of memory.  After reset printer would no longer at all

  (2) I tried installing and uninstalling printer wireless in several ways, ethernet and USB.  Printer would never even print a test page.  Attempts to print the pages of any other report or configuration would result in the 49 service error

  (3) BrightHouse (carrier) was 3 separate times to tweak the modem, try to uninstall and reinstall the printer, etc.

  The problem turns out to be that with some modems, HP can not communicate over IPv6 with modem you (they don't play well together using IPv6) either because of the HP or the modem, HP likely due to the fact that he always seems to be HP printers with this problem.

  Here are the steps I took finally solved this.  Please note that the solution came from a technician BrightHouse to a different Web site.  I'm just passing along the info in case it helps others:

  (1) completely uninstall the printer from the PC, including the printer, he installed all the software, drivers and all the ports that you may have created trying to recify problems

  (2) to shut down the computer

  (3) disconnect the ethernet cable from the printer (as applicable)

  4) click on the reset button on the home screen to reset to the default values for the printer

  (5) do a cold reset the printer (people of email support the HP for the procedure)

  (6) on the interface of the printer (screen), go into the settings; network settings, network services.  Here you will see IPv4 and IPv6.  Disable IPv6.  Don't mess wth IPv4 (leave it on).

  (7) plug the ethernet cable into the printer or activate/configuration of wireless settings using the printer (screen) interface.

  8) turn on the computer

  (9) install the printer using the CD that came with it or installation software downloaded from the HP website.

  I'm not sure that each of these steps is absolutely necessary, as step 4, but that's what I did...

  I saw so many messages on the internet with HP printers not install correctly and launch a 49 service error instead.  Not sure how those problems, This applies.  But HP needs to fix this issue with their printers IPv6 or at least try to find the cause...

• host process for windows services error

  Can I get the service of email and internet for a little while, then the message above appears and I can no longer search the Web or get mail unless I restart my computer.  I also can't update my antivirus or get Microsoft updates.

  Can I get the service of email and internet for a little while, then the message above appears and I can no longer search the Web or get mail unless I restart my computer.  I also can't update my antivirus or get Microsoft updates.

  I found this in my "library", and I wonder if it applies to you.
  It is clear that I don't know if the method actually works. Just send you if you are interested.
  .....................................................................................................................................................

  HOST PROCESS FOR WINDOWS SERVICES STOPPED WORKING AND WAS CLOSED

  I had this problem, as well as the browser Chome Goggle does not and one Windows Update error 80072EFE code.  After months of research, I found that mosty likely, the computer has been infected by ROOTKITS. Try TDSSKILLER to find rootkits. Download and run from here
              http://support.Kaspersky.com/viruses/solutions?QID=208280684
  ........................................................................................................................................................

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Windows service error: "error 1053: the service did not respond at the beginning or".

  Hello

  I had created a Windows service to start and stop a Tomcat server. Whenever the Tomcat server works with Multi threaded items and if I try to stop the Tomcat using the Windows service I get the following error, "error 1053: the service did not respond at the beginning or".
  application for review in due course. "

  I can't change the value of 'WaitToKillServiceTimeout' as my services are running on the client computer. Y at - it any other way I can do windows services to expect my Application Server series of all threads and stops.

  Kind regards

  Amina

  Hello

  I suggest you to ask your question in the Microsoft TechNet Forums: http://social.technet.microsoft.com/Forums/nl/category/windowsserver

  I hope this helps.

• WINDOWS SERVICES ERROR 711

  Hello, so here's the thing. After installation windows for my new pc after 10-12 hours of my 3g internet use has stopped working and I could not find connection and I got error 711 could not load remote access connection manager. so I went to services.msc and tryied manually start the remote access and remote access connection anager but auto both returned with error 1068 the dependency service or group was able to start. so I checked the dependecy services for 2 services and they work all secure socket tunneling, telephony and plug-and-play, to the windows event log and I tryied 10000 other things to solve the problem and finally I reinstalled my windows, this time, I only installed the drivers that I need (vga, chipset, sound) and nothing else but I mean really nothing else was installed on my pc and wisely created a restore point after This and after 6-8 hours my connection broke and I got the same problems again, the same mistakes, I could not load these 2 services., so if someone had a similar problem or knows how to solve this problem I would be gratefull, coz I need 3G internet coz I live in a city and restore the system to help every 5 6 hours is not really an option. , and anyone who asked Yes dependecy ALL services are operational windows event log is running. Thank you in advance Ivan :)

  I don't think I can help you solve the problem. You need someone who has a greater knowledge to solve network problems that I do.

  I suggest that you start a new thread in this forum:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking?sort=lastreplydate&dir=desc&tab=threads&status=&mod=&modAge=&advFil=&postedAfter=&postedBefore=&threadType=all&TM=1392385803381

• the Windows spooler service error

  I am trying to reinstall the printer software, but keep getting windows critical error spooler service does not start. How to cure the problem

  Note: "the title of this post was published to help other customers to easily find this topic in their search results."

  Hi Phil,

  Thanks for posting this question in the Microsoft Community Forums.

  From you description of the problem, I see that the Windows print spooler service is stopped.

  Let us work together to start the print spooler service.

  However, before we start, we need more information to better understand this issue. Please answer these questions.

  1. What is the exact error message that you receive?

  2. which version of the Windows operating system is installed on the computer?

  3. What is the brand and model of the printer?

  4. when exactly you receive the error message?

  5. don't you make changes to the computer before this problem?

  Let us try to start the Windows Print Spooler Service:

  To do this, follow these steps:

  a. on the desktop, press the Windows key + R to open the dialog box run.

  b. type services.msc (in the search bar) and press enter.

  c. scroll down the Services window and right-click on print spooler.

  d. Select Properties.

  e. in the general tab, click Start and make sure that the Startup Type is Automatic.

  f. click apply and OK.

  This will start the print spooler service.

  Now, try to reinstall the printer software and check if it works.

  Please get back to us with the results and more information on the issue.

   

  If you have questions about Windows operating systems, write to us, at any time. We are happy to help you.

• Windows service pack 1 for x 64 8007045 D-based systems error

  I am trying to install updates, especially the windows service pack 1 for x 64 systems and I am getting the error 8007045 D. He gets almost throughout then this error appears.

  Anyone have any ideas?

  Ta

  Hello Mummyd,

  Thanks for your post.  If please make your way through the troubleshooting steps below and let us know the results of each utility so that we can better help you get this issue resolved.

  1. download / install and run the tool update system - CheckSur.  You can download the tool from the link below.

  Download the tool update system (64-bit)

  2. click Start type cmd (you should see the command prompt fill up) right click and select run as administrator

  Inside the command prompt, type sfc/scannow

  For more information regarding the file system checker.

  * If corruption is found, see How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  3. once the SFC is finished, check your hard drive for errors.

  4 restart the system update readiness tool. If errors have been eliminated, try to reinstall Service Pack 1. If this is not the case, go to step 5.

  5. perform a Startup Repair, when starting, try to install the Service Pack.

  We can't wait to hear back on your part.

  See you soon

• Windows service pack 1 downloads 99.9% but still comes up with error and does not?

  Windows service pack 1 downloads 99.9% but still comes up with error and does not?

  jktjw,

  Please post with the information requested here: what to post in the Windows Update forum
  Start with the troubleshooting steps and post returns with the requested info and arises from the troubleshooting.

  Clean boot your PC, and then run Windows Update.

  Reset the Windows Update components

  Perform operations of KB883825

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error 1601, install shield is not accessible. Installation of Windows service has stop working.

  Original title: my windows service install abandonment of work may not have it installed at all do I need to reinstall win xp.

  service inst. Win does not install shield not accessible error 1601 cant install data files to dvd games cannot uninstall files I need help

  Hello
  before you try a complete reinstall, try to download from this page:
  http://support.Microsoft.com/kb/315353
  Let me know what happens
  b Eddie

• I received calls from someone in India who said that they are Windows services centre telling me that they have received the error message saying that my computer is corrupted

  Original title: my computer is corrupt and needs fixing!

  I received calls from a person in India who said that they are Windows services centre telling me that they have received the error message saying that my computer is damaged, and they want to help me.  But I have not received any error message on my screen.  When I asked them how they got my number they said it's from the database of Windows. The number they gave me is 02921252715 and when I called the number of the person on the other end told me that they are a company called Windows e-solution, independent company and is not attached to Microsoft Windows.  What should I do?  Are these authentic calls and approved by Microsoft Windows?

  Hello

  Its a SCAM!

  Avoid scams to phone for tech support
  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  In the United States, you can contact the FBI, Attorney general, the police authorities and consumer
  Watch groups. Arm yourself with knowledge.

  No, Microsoft wouldn't you not solicited. Or they would know if errors exist on your
  computer. So that's the fraud or scams to get your money or worse to steal your identity.

  Avoid scams that use the Microsoft name fraudulently - Microsoft is not unsolicited
  phone calls to help you fix your computer
  http://www.Microsoft.com/protect/fraud/phishing/msName.aspx

  Scams and hoaxes
  http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#tab3

  Microsoft Support Center consumer
  https://consumersecuritysupport.Microsoft.com/default.aspx?altbrand=true&SD=GN&ln=en-us&St=1&wfxredirect=1&gssnb=1

  Microsoft technical support
  http://support.Microsoft.com/contactus/?ws=support#TAB0

  Microsoft - contact technical support
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Problem after installing Windows Service Pack 3 on Windows XP Home edition error Media pc: files which are required for Windows to run properly have been replaced by unknown...

  Original title: problem after installing Windows Service Pack 3 on Windows XP Home Media edition pc

  My pc runs Windows XP Home Media edition.  I installed Windows Service Pack 3 successfully, or so I thought. Whenever I turn on my pc a box opens indicating "files which are required for Windows to run properly have been replaced by unrecognized versions."  To maintain the stability of the system.  Windows must restore the original versions of these files.  Install your Windows XP Professional CD2.  I don't have any Windows XP Professional CD that I use the Home Media Edition. If I press Cancel repeatedly, the window disappears to return with the same information, but ask me to install Windows XP Professional CD3.  How can I stop this happening?

  Hello

  Step 1: I suggest you perform the SFC scan on the computer and check.

  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.
  2. right click on cmd in the list programs and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  3. at the command prompt, type the following line and press ENTER:

  sfc/scannow

  Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

• Cannot install updates Apple or HP. Error "Setup Windows service could not be accessed."

  I am running Windows XP and recently were not able to install updates apple or hp and get an error message saying that windows service install could not be accessed.

  error message when you try to install itunes or apple updates and updates from hp.  It is said: the window installation service could not be accessed. This can occur if you are running windows in safe mode or if windows install is not properly installed.  Contact your support team.

  Hi Linda,.

  You can read the following article and see if it helps.

  Error message when you try to add or remove a program on a computer that is running Windows XP: "the Windows Installer service is not to be accessible.

• You try to start a service error "Windows failed to start the VMware authorization on local computer Service. For more information, see the system event log. If it is a non-Microsoft service, contact the service provider

  Ideas:

  • You have problems with programs
  • ETrying to launch a service error "Windows failed to start the VMware authorization on local computer Service. For more information, see the system event log. If it is a Microsoft service, contact the service provider and refer to the specific service-6000004 error code "... I contacted the people at VMware they say it's a problem with Windows Vista..." IAM confused pls help... .rror messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hi sanjeevkode,

  Thank you for visiting the website of Microsoft Windows Vista Community.  As the question you posted typically associated with third party software / application that has its own way of program codes and call the corresponding system resources when installing and running. Therefore, I also suggest you to join the VMware Forums for the best support.

  VMware communities: http://communities.vmware.com/home.jspa

  In the meantime I suggest you try these options / methods

  IMPORTANT NOTE: Microsoft provides this information as a convenience to you. Proposed changes could lead to serious problems. Microsoft cannot guarantee that problems would be solved as a result of the suggestions. Changes to settings are at your own risk.

  Option 1: If you go to computer management, and then to the list of Services and find the VMware authorization Service, it appears as stopped? If so, you need to start

  Option 2: Try logging on as an administrator Local host during installation first workstation, rather than you connect with a domain ID

  Option 3: The question can be caused also by your security program such an antivirus or a firewall of Windows /Defender that can have conflicting parameters as to not not to perform certain tasks. I suggest you temporary disable antivirus and firewall and check the result again. You must enable security programs new that had disabled you

  Option 4: The problem could be linked to a local or domain group policy. Make sure that the local account is defined as 'local user __vmware_user__' in the local Administrators group and the permissions of "Log on locally" and "Log on as a service.

  The two parameters are available in the "* Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment *" branch of domain group policy or local.

  Let me know if it worked.
  Hope it will be useful.

  Thank you and best regards,
  Vijay K - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Problem area: windows update; Error: TRUST_E_NOSIGNATURE (0x800b0100) __Message: installation error prevented the service pack 2 windows systems (KB948465) _

  Problem area: windows update; Error: TRUST_E_NOSIGNATURE (0x800b0100)
  Message: Installation error prevented the service pack 2 windows systems (KB948465)

  http://support.Microsoft.com/kb/956702

  «Error message when you try to use Microsoft Update or Windows Update Web sites to install updates: «0x800B0100»»

  Method for Windows Vista or Windows Server 2008 to resolve this issue, run the tool (Checksur.exe) system update. To do this, follow these steps:

  1. Download and run the system update tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations. For more information about how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:
     947821 (http://support.microsoft.com/kb/947821/) Description of the update readiness tool for Windows Vista system
  2. Try to install updates again.

  http://support.Microsoft.com/kb/947821/

  "Description of the preparation tool system update for Windows Vista for Windows Server 2008 and for Windows 7"

  If the above solves the problem:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include this error Code, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Service pack 1 installation of not-Windows Update Error 80070002.

  Original title: Service pack does not install it.

  Hello

  I had to restart my laptop (Windows Vista) to factory setting because the system has begun to slow down; I now can't install SP1, it appears on the new & new window updates and downloads in a few minutes. Although it does not install correctly.

  I still can not download Norton because it requires service pack 1.

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->
  Validation status: genuine
  Validation code: 0
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-* - 4GV68 - 6D8JB-G6MF9
  The Windows Product Key hash: au + OBZ1y48sKA/bWkfKXiuCrOjY =
  Windows product ID: 89578-OEM-7332157-00203
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.0.6000.2.00010300.0.0.003
  ID: {2517015B-18C6-4826-A728-38DF83AB7F75} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows Vista (TM) Home Premium
  Architecture: 0x00000000
  Build lab: 6000.vista_gdr.100218 - 0019
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: B4D0AA8B-604-645_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 7.0; Win32)
  Default browser: C:\Program Files\Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {2517015B-18C6-4826-A728-38DF83AB7F75}1.9.0027.06.0.6000.2.00010300.0.0.003x 32*-*-*-*-G6MF989578-OEM-7332157-002032S-1-5-21-1414528651-3301326876-351726145Sony Corporation,VGN-FZ11SPhoenix Technologies LTD.R0050J720070418000000.000000 + 000E1323507018400FA08090409GMT Standard Time(GMT+00:00)03SonyVAIO109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.0.6000.16509
  Name: Windows Vista, HomePremium edition
  Description: operating system Windows - Vista, channel OEM_SLP
  Activation ID: bffdc375-bbd5-499d-8ef1-4f37b61c895f
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 89578-00146-321-500203-02-2057-6000.0000-1052013
  Installation ID: 102120767924454475951502567153512013056414419884416224
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkId=57201
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkId=57203
  Use license URL: http://go.microsoft.com/fwlink/?LinkId=57205
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkId=57204
  Partial product key: G6MF9
  License status: licensed

  Windows Activation Technologies-->
  N/A

  --> HWID data
  Current Hash HWID: NAAAAAEAAwABAAEAAQABAAAAAwABAAEAJJR + N/LlvO5wsEaDwoOcB/L0KhN2niaWrFYqhQ ==

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20000
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC Sony VAIO
  Sony VAIO FACP
  HPET Sony VAIO
  Sony VAIO BOOT
  MCFG Sony VAIO
  TCPA Sony VAIO
  SLIC Sony VAIO
  Document TMOR Sony VAIO
  APIC Sony VAIO
  SSDT Sony VAIO
  SSDT Sony VAIO
  SSDT Sony VAIO
  SSDT Sony VAIO

  Hi Keshwala,

  We need a few details to help you install Service pack 1, please answer the following.

  1. What antivirus application do you use on your computer?
  2. Was no problem with the installation of other updates to Windows?
  3. You have the Windows Vista installation disc?

  You can refer to the following methods, these could help you install Service pack 1 on your computer.

  Method 1:

  If you receive the error Windows Update 80070002 of updates, you must remove the temporary files to update that Windows uses to identify updates for your computer. see the methods in the following link.

  Windows Update Error 80070002.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002

  Method 2:

  Disable the antivirus software, install the service pack and check the issue stattus.

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  You can also refer to:

  You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services

  http://support.Microsoft.com/kb/910336

  I hope this helps.