Windows takes longer to start

Similar Questions

• domain controller Windows server 2008 take longer to start exchnange server after 2007, it is installed on the server in separate windows 2008

  <! [endif] > <! [if gte mso 9] >

  Can someone help me with the question of the field of windows 2008 64 bit

  controller installed in vmware esx 3.5. The situation is that we

  installed windows 2008 64-bit domain controller server hs21 blade. There are

  separate Exchange 2007 server on windows 2003 64-bit server and it works

  fine. After I installed another Exchange in windows 2008 64-bit of the domain

  controller take almost 500 seconds to start.

  Firs I recreated all the infrastructure twice but it is the same

  situation after exchange 2007 is installed on windows 2008. Windows 2008

  all updates and exchange 2007 to sp1.

  Wrong forum - this is Server 2.0 not ESX.

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• New hard drive SSD on MBP take longer to start than the smaller size SSD?

  I have improved my HD with a 1 TB of a 250 original HD - disk SSD TIMES. A new takes more time to start. It takes about 10-15 seconds of a black screen before the Apple logo and the start screen appears. Therefore, the new drive starts and loads faster than the older DSS programs. When I turned on the computer with the old SSD, I heard the 'noise' and the apple logo came immediately.

  I improved by my old disk cloning using SUPER DUPER of shirt pocket by putting the new HD into a box to clone. It went well. However, its takes more time to see the apple logo and I was wondering if some setting needs to be changed. Everything else works great!
  Thanks for any help that anyone can provide.

  Skip

  Although this is not the problem, go to System-> startup disk Preferences and check that your OS X partition is highlighted as the boot partition. If this is not the case, do. After that, your Mac will automatically start in OS X. If you do not choose any boot drive, your Mac can find all disks bootable on your Mac, which can take some time.

• Shut down Windows takes longer than 3 minutes

  Separated from this thread.

  When I stopped in Windows 7 the "Shutting Down" screen stays on for more than three minutes. I tried to start in safe mode, but I get the same result. I tried to disable third-party programs and get the same result.

  It's annoying when you have to restart.

  Frederik

  Do not press the power button to turn off the computer or to solve a gel. Click on the ORB at the bottom left of the desktop and click stop. If you are having shutdown problems, then select the hotkey Ctrl + Shift + Esc to bring up the Task Manager and click the Applications place the cursor on a running application to select and click on the end task button. As the application is removed from the list, repeat the procedure on the next application in the list until all are gone from the list. If you use the taskbar to access programs simply close all open windows. Then, you should be able to shut down your computer.

  http://Windows.Microsoft.com/en-in/Windows7/turning-off-your-computer-properly

• Cisco ACS appliance takes long to start after initial config

  Hello

  I'll put up 2 ACS (1113 HW, SW 4.1) devices. After the initial configuration (IP address, admin pass etc.) and reboot, the devices do not seem to start or close the login prompt (even after a start of the night).

  What could be the problem with the device or my patience?

  Hello

  If you get something like from console windows,

  Then, make sure that you use less than 15 characters without spaces unit name.

  Kind regards

  Prem

• Windows is slow to start

  Windows take long at the start that I have windows Xp and my pc is a Hp Pavilion a1340n

  Bernabe, if that makes some time you did a 'system' full recovery, it could be a good time to do so.  Over time, install and uninstall programs will leave residue in the 'registry '.  This starts to cause things to slow down.  You can also defragment the hard drive and do a disk cleanup.

• PC Windows 7 after authentication of login take longer startup time for show desktop

  My PC takes longer to show desktop. It's really annoying. I want ot fast to the top of my PC. According to me, it's a starter problem or due to a lot of useless data. Below more details on my PC Configuration:
  ------------------
  Information System
  ------------------
  Time of this report: 06/01/2012, 21:32:21
  Computer name: USB - PC
  Operating system: Windows 7 Home Premium 32 - bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.111025) - 1505
  Language: English (regional setting: English)
  Manufacturer: Hewlett-Packard
  Model: HP Pavilion dv4 Notebook PC
  BIOS: Default system BIOS
  Processor: Intel (r) Core (TM) 2 Duo CPU T6600 2.20 GHz (2 CPUs), ~2.2GHz
  Memory: 4096 MB RAM
  Available OS memory: 3038MB RAM
  Page file: 2180MB used, 10856 MB of available space
  Windows Dir: C:\Windows
  DirectX version: DirectX 11
  DX setup parameters: not found
  DPI setting: Using System DPI
  System DPI setting: 96 DPI (100%)
  DWM DPI Scaling: disabled
  DxDiag Version: 6.01.7601.17514 32 bit Unicode

  Hi GOWTHAMU. S,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Disconnect all external devices and try to start the computer.

  Method 2: Run the troubleshooter of performance.

  Open the troubleshooter of Performance

  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  Method 3: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: If the problem does not persist in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 4: Follow the steps in the article.

  Optimize Windows 7 for better performance

  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Ways to improve your computer's performance

  http://Windows.Microsoft.com/en-us/Windows7/ways-to-improve-your-computers-performance

  Method 5: Update the chipset and other drivers.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• My laptop HP Pavilion G6 takes so long to start and other issues.

  Hello! I have problems with my laptop, I have a HP Pavilion g6. This isn't an old computer I only got it for less then a year. My laptop takes so long to start. When I turn on the laptop it takes so long to come to the screen where u enter your password and when I type my password it takes so long to come to my home screen and now its freezes sometimes when I throw things like facebook or other things. I tried fixing it by having my laptop for a problem look. He found a problem that I've corrected, but it did not help. I tried google, and he says things like u might have a lot of cookies, junk files, virus or cache etc (I have an anti-virus installed in my computer as well). Very confusing! Its my 1st laptop after a very long period and this information is very confusing to me. If anyone can help!

  Original title: problem with my windows 8.

  Security Essentials scans files as they are downloaded from the Internet, Yes.  In my opinion, no other additional internet security is necessary as long as you practice good habits like not downloading websites you really trust and take seriously the messages of warning and never just by clicking 'allow' unless really trust you him.

  Also on startup programs, you have no need to again use the program. If you disable on this auto start, you can still open the program when you want normally (the only difference is that the program cannot start itself without you more).

• Hyperion EPM services take too long to start

  Hyperion 11.1.2.3

  Windows 2008 R2

  32 GB of memory on each server

  Java 1.6.35

  Server environment four (Foundation/FDMEE, planning, Essbase and SQL server).

  Some how it takes too long to start the services of Hyperion. Using the batch script to start all services. Can someone advise where to start looking. Here's the log of HyS9Planning_SERVER-sysout. If this can give an idea

  < 12 February 2014 12:40:34 hours EST > < Info > < security > < BEA-090905 > < disabling CryptoJ JCE provider auto-intégrité for better startup performance. To allow this control, enter - Dweblogic.security.allowCryptoJDefaultJCEVerification = true >

  < 12 February 2014 12:40:35 hours EST > < Info > < security > < BEA-090906 > < change the default Random Number Generator in RSA CryptoJ of ECDRBG to FIPS186PRNG. To disable this change, specify - Dweblogic.security.allowCryptoJDefaultPRNG = true >

  < 12 February 2014 12:40:35 hours EST > < opinion > < WebLogicServer > < BEA-000395 > < according to the contents of the extensions added at the end of the classpath directory:

  D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\audit-client.jar;D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\css.jar;D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\ctg_custom.jar;D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\ldapbp.jar;D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\opencsv-1.8.jar;D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\registry-api.jar;D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\wlpool.jar>

  < 12 February 2014 12:40:35 hours EST > < Info > < WebLogicServer > < BEA-000377 > < start WebLogic Server with Oracle JRockit (R) Version R28.2.5-50-153520-1.6.0_37-20121220-0844-windows-x86_64 of Oracle Corporation >

  < 12 February 2014 12:41:19 hours EST > < Info > < management > < BEA-141107 > < Version: WebLogic Server 10.3.6.0 Mar 15 08:52:36 PST Nov 2011 1441050 >

  < 12 February 2014 12:41:43 hours EST > < emergency > < management > < BEA-141151 > < Management Server could not be reached at http://hydevf01.uts.mcmaster.ca:7001. >

  < 12 February 2014 12:41:43 hours EST > < Info > < Configuration Management > < BEA-150018 > < this server will be started in mode of managed server independence in the absence of the admin server. >

  < 12 February 2014 12:41:43 hours EST > < opinion > < WebLogicServer > < BEA-000365 > < server status changed initially >

  < 12 February 2014 12:41:43 hours EST > < Info > < WorkManager > < BEA-002900 > < self-adjusting Initializing of thread pool >

  < 12 February 2014 12:41:44 hours EST > < opinion > < LoggingService > < BEA-320400 > < D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\Planning0.log log file will be rotated. Reopen the log file if stopped tailings. This can happen on some platforms such as Windows. >

  < 12 February 2014 12:41:44 hours EST > < opinion > < LoggingService > < BEA-320401 > < log file was shot in D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\Planning0.log00014. Log messages will continue to be logged in D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\Planning0.log. >

  < 12 February 2014 12:41:44 hours EST > < opinion > < Log Management > < BEA-170019 > < D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\Planning0.log server log file is opened. All events in the log server-side will be written to this file. >

  OracleFileSSOWalletImpl.getWalletData: enter...

  OracleFileSSOWalletImpl.getWalletData: System.getProperty (user.name) = sp_hydevadm

  OracleFileSSOWalletImpl.getWalletData: dummy sso (shared) file locking...

  OracleFileSSOWalletImpl.getWalletData: locking (shared) file sso...

  Oracle Wallet: Pocket size 12573

  OracleWallet: getSecretStore

  OracleSecretStore: load flow wallet

  OracleSSOKeyStoreImpl: engineLoad

  OracleKeyStoreSpi: Load flow wallet

  OracleKeyStoreSpi: Safe opening 0

  OracleKeyStoreSpi: Safe opening 0

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: Safe opening 0

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: Safe opening 0

  OracleKeyStoreSpi: Safe opening 0

  Treatment TP 0

  Storage TP 0 as CN = Entrust .net Secure Server Certification Authority

  TP-1 treatment

  Storage TP 1 as CN = Entrust .net Secure Server Certification Authority 1

  Treatment of TP 2

  TP 2 storing as authority of Certification CN = Entrust .net (2048)

  Treatment TP 3

  Storage of TP 3 in CN = GTE CyberTrust Global Root

  TP 4 of treatment

  TP 4 storing as OU = Secure Server Certification Authority

  Treatment TP 5

  TP 5 storing as UO = class public primary Certification Authority 1

  Treatment TP 6

  TP 6 by storing like UO = class public primary Certification Authority 2

  TP treatment 7

  TP 7 by storing like UO = class public primary Certification Authority 3

  OracleKeyStoreSpi: Storage Secret0

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Storage Secret1

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Storage Secret2

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Storage Secret3

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Storage of Secret4

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Storage Secret5

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Storage Secret6

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Storage Secret7

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Keystore loaded

  OracleWallet: getSecretStore

  OracleFileSSOWalletImpl.getWalletData: enter...

  OracleFileSSOWalletImpl.getWalletData: System.getProperty (user.name) = sp_hydevadm

  OracleFileSSOWalletImpl.getWalletData: dummy sso (shared) file locking...

  OracleFileSSOWalletImpl.getWalletData: locking (shared) file sso...

  Oracle Wallet: Pocket size 3941

  OracleWallet: getSecretStore

  OracleSecretStore: load flow wallet

  OracleSSOKeyStoreImpl: engineLoad

  OracleKeyStoreSpi: Load flow wallet

  OracleKeyStoreSpi: Safe opening 0

  OracleKeyStoreSpi: Safe opening 0

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: Safe opening 0

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: Safe opening 0

  OracleKeyStoreSpi: Safe opening 0

  Treatment TP 0

  Storing TP 0 as UO = class public primary Certification Authority 1

  TP-1 treatment

  Storage of TP 1 in CN = GTE CyberTrust Global Root

  Treatment of TP 2

  TP 2 by storing like UO = class public primary Certification Authority 2

  Treatment TP 3

  TP 3 by storing like UO = class public primary Certification Authority 3

  OracleKeyStoreSpi: Storage Secret0

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Storage Secret1

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Storage Secret2

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Storage Secret3

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Keystore loaded

  OracleWallet: getSecretStore

  < 12 February 2014 12:42:11 hours EST > < opinion > < security > < BEA-090082 > < security initialization using security realm myrealm. >

  < 12 February 2014 12:42:55 hours EST > < WARNING > < JTA > < BEA-110503 > < migration tool (the AdminServer for JTA manual migration policy, or the captain Singleton for automatic migration JTA strategy) is not available. Jump JTA TRS restoration because isStrictOwnershipCheck is [false]. This may cause corruption of potential TLOG if TRS of Planning0 has been migrated to the backup server and the backup server accesses the TLOG of Planning0. More security can be achieved by setting isStrictOwnershipCheck [true]. >

  < 12 February 2014 12:42:56 hours EST > < opinion > < LoggingService > < BEA-320400 > < D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\access.log log file will be rotated. Reopen the log file if stopped tailings. This can happen on some platforms such as Windows. >

  < 12 February 2014 12:42:56 hours EST > < opinion > < LoggingService > < BEA-320401 > < log file was shot in D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\access.log00030. Log messages will continue to be logged in D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\access.log. >

  < 12 February 2014 12:43:01 hours EST > < WARNING > < oracle.dms.jrockit.jfr > < DMS-58041 > < The JRockit FlightRecorder class declares that it is not active and so the DMS cannot use it. >

  < 12 February 2014 12:44:01 hours EST > < opinion > < WebLogicServer > < BEA-000365 > < server changed to STANDBY status >

  < 12 February 2014 12:44:01 hours EST > < opinion > < WebLogicServer > < BEA-000365 > < server status changed initially >

  Using the OraclePKI provider

  taken javax.net.ssl.TrustManagerFactory supported

  taken javax.net.ssl.KeyManagerFactory supported

  Using the OracleJSSE103 provider

  < 12 February 2014 12:47:37 hours EST > < WARNING > < security > < BEA-090668 > < ignored the role 'Admin' resource deployment ' type = < url >, application is DMS Application #11.1.1.1.0, contextPath = / dms, uri = / ">".

  < 12 February 2014 12:51:03 hours EST > < WARNING > < oracle.adfinternal.view.faces.partition.FeatureUtils > < ADF_FACES-30130 > < without taking into account the dependence of the feature on the function "AdfDvtCommon".  There is no such feature. >

  ATTENTION: From post-deployment of ADF library jar on WebLogic Server. "Provider-lazy-inited" init-param missing LibraryFilter? Ignore this warning if the ADFJspResourceProvider is not used.

  On the road: ADF library non-ADFJspResourceProvider after deployment

  Finishing: ADF library non-ADFJspResourceProvider after deployment (millis): 16

  null

  < 12 February 2014 12:51:17 hours EST > < opinion > < Cluster > < BEA-000197 > < listening for cluster communications using unicast cluster messaging >

  < 12 February 2014 12:51:17 hours EST > < opinion > < Cluster > < BEA-000133 > < waiting to synchronize with other members in the planning stages. >

  < 12 February 2014 12:51:22 hours EST > < WARNING > < Log Management > < BEA-170011 > < The LogBroadcaster on this server has no messages to the server admin log. The server administrator can not run. Emissions of message to the administrator of the server will be disabled. >

  < 12 February 2014 12:51:48 hours EST > < opinion > < WebLogicServer > < BEA-000365 > < server status changed to ADMIN >

  < 12 February 2014 12:51:48 hours EST > < opinion > < WebLogicServer > < BEA-000365 > < Server State has changed for RESUMING >

  < 12 February 2014 12:52:24 hours EST > < opinion > < Cluster > < BEA-000162 > < "async" replication service to start with remote cluster address "null" >

  < 12 February 2014 12:52:24 hours EST > < opinion > < Server > < BEA-002613 > < Channel "Default" is now listening on 172.26.55.119:8300 for protocols iiop, t3, CLUSTER-STREAM, ldap, snmp, http. >

  < 12 February 2014 12:52:24 hours EST > < opinion > < Server > < BEA-002613 > < Channel "Default [2]" is now listening on fe80:0:0:0:0:100:7f:fffe:8300 for protocols iiop, t3, CLUSTER-STREAM, ldap, snmp, http. >

  < 12 February 2014 12:52:24 hours EST > < opinion > < Server > < BEA-002613 > < channel 'by default [5]' now listen on 0:0:0:0:0:0:0:1:8300 for protocols iiop, t3, CLUSTER-STREAM, ldap, snmp, http. >

  < 12 February 2014 12:52:24 hours EST > < opinion > < Server > < BEA-002613 > < Channel "Default [4]" now listen on 127.0.0.1:8300 for protocols iiop, t3, CLUSTER-STREAM, ldap, snmp, http. >

  < 12 February 2014 12:52:24 hours EST > < opinion > < Server > < BEA-002613 > < Channel "[1] by default ' is now listening on fe80:0:0:0:385e:468:a776:2aac:8300 for protocols iiop, t3, CLUSTER-STREAM, ldap, snmp, http. >

  < 12 February 2014 12:52:24 hours EST > < opinion > < Server > < BEA-002613 > < Channel "Default [3]" is now listening on fe80:0:0:0:0:5efe:ac1a:3777:8300 for protocols iiop, t3, CLUSTER-STREAM, ldap, snmp, http. >

  < 12 February 2014 12:52:24 hours EST > < WARNING > < Server > < BEA-002611 > < Hostname "HYDEVP01.uts.mcmaster.ca", corresponds to multiple IP addresses: 172.26.55.119, fe80:0:0:0:385e:468:a776:2aac % 14 >

  < 12 February 2014 12:52:24 hours EST > < opinion > < WebLogicServer > < BEA-000358 > < started WebLogic independent server managed by "Planning0" for the domain "EPMSystemHYDEV" running in Production Mode >

  < 12 February 2014 12:52:24 hours EST > < WARNING > < JMX > < BEA-149510 > < could not establish connectivity JMX with the Administration Server AdminServer to < JMXServiceURL:null >. >

  < 12 February 2014 12:52:39 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,430 for the configured timeout of 5 seconds >

  < 12 February 2014 12:52:39 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,427 for the configured timeout of 5 seconds >

  < 12 February 2014 12:52:39 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,429 for the configured timeout of 5 seconds >

  < 12 February 2014 12:52:40 hours P.M. > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,428 for the configured timeout of 5 seconds >

  < 12 February 2014 12:52:49 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,441 for the configured timeout of 5 seconds >

  < 12 February 2014 12:52:49 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,442 for the configured timeout of 5 seconds >

  < 12 February 2014 12:52:49 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,443 for the configured timeout of 5 seconds >

  < 12 February 2014 12:52:49 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,439 for the configured timeout of 5 seconds >

  Do you still have this problem after restarting the server?

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Hearing of 2015 CC takes too long to start

  Hearing of 2015 CC takes too long to start. As more than a minute.

  Using administrator rights does not make a difference.

  Fresh install... even though I updated from Windows 8.1 to 10 Windows (Windows updater) and I had hearing in Win8.1 so... is there any cleaner Adobe application that I could use to solve this problem?

  I found the solution!

  Simply find the file dynamiclinkmanager.exe on any folder of Adobe products, that is having this same problem, and remove the extension (.exe) format to it.

  Confirm the action and open the hearing as quickly as it should.

• I use Windows XP Home Edition. It takes awhile to start when I turn on the computer. How can I speed up this process?

  I use windows XP Home Edition. It takes awhile to start when I turn on the computer. How can I speed up this process?

  original title: slow start
  • Faster processor.
  • Fastest hard drive.
  • Faster or more RAM/memory.
  • Less things loading at startup.
  • Appropriate and the most recent hardware device drivers.

  In XP, you can cleanup and optimize it in some way, by using the following tips:

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are up-to-date and should work fine - there is another thing you pouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.  This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• Clipboard and late at the start of Windows no longer works

  It starts at random, and usually I just stop DWM and use the aero Troubleshooter to fix. When that happens, any delay. Windows take forever to pop up, my games do not work well, and everything is working slowly. I tried everything else a clean install and nothing suits him. I am able to achieve 100% of the time by minimizing a Chrome window and drag it to the top of my screen.

  Anyone has any ideas how to solve this problem?

  Chrome has two flaws that cause terrible performance.  It uses about 5 x as much memory as it should, and it sets your clock CPU 100% rate if she needs it or not.

  Recommendation: uninstall Chrome, reboot, then see how the conditions change.

  PS. Google has said they're going to solve these problems next year.

• Toshiba WL863 takes too long to start and its Set Top box problem

  Hello

  Aside from no YouTube on the TV - is not a real question

  I have 2 problems with WL863 TV:

  1. the TV takes long time to turn on (between 2.5 and 4 minutes).
  2. the sound of the TV from a Set Top box (HDMI) changes from time to time, as if a low-pass filter has been activated, living just a whistling noise, but returns to normal every few minutes.

  I use the latest firmware.

  This would have something to do with the settings, or do I have to send the TV for repair under warranty?

  Please give some suggestions.

  Thank you

  > 1. The TV takes time to market (between 2.5 and 4 minutes).
  Have you noticed that in the past, or the first day of purchase?

  If not, I recommend you load the default settings (reset) TVs and check it again.
  In the case where the reset won't help you, it might be that a question and device TV related material must be verified by the service agent.

  > 2. The sound of the television to a Set Top box (HDMI) changes from time to time, as if a low-pass filter has been activated, living just a whistling noise, but returns to normal every few minutes.

  This problem could be linked to the connected Set Top Box and not the TV device.

  TV receives the audio signal from the external, connected HDMI (in your Set Top Box case) device. Check if the same audio issues would be noticeable by using another external device like a DVD or BD player. In case the sound issue would be noticeable only with decoder, the question isn't related to the TV, but to the external device.

• Windows takes time to stop when the computer is turned off

  has had to reload xp without windows takes a long time to stop

  Hello

  Welcome to the Microsoft community!

  You re - install Windows XP and still have the same problem?

  During the shutdown of the Windows XP computer, it may take longer time to complete the shutdown process. Slow stops are caused a lot of factors. One of the causes is the clear pagefile at shutdown option enabled.

  Try the following steps:

  Use the Group Policy Editor

  a. Click Start, run and type in "Secpol.msc".
  b. click local policies | Security options.
  (c) in the right pane, set stop: clear the pagefile of virtual memory for people with reduced mobility.

  However, this setting is not the only cause of slow closures. No relevant programs and Services also contribute to slow closures.

  If the problem is seen recently after installing a driver software or third-party, try a system restore to see if that solves the problem of the slow stop.

  How to restore Windows XP to the previous step: http://support.microsoft.com/kb/306084

  I hope that helps!

  If you need further assistance on this issue or any related issue of Windows in the future please let us know.

• Computer laptop Windows XP does not start? Help

  Hi I have a windows xp laptop I think that their system eis or something like that... Whenever I start the laptop, he's going on the error you get when your dosent laptop shut down correctly. If I click on start normally the bar will spend about a quarter of the way and then just stayed forever and only safe mode also gets a freeze from then. Y at - it something wrong with the laptop or what. How can I get my laptop to work again... someone help me please.

  It is up to tell you to us what brand of system and the model is... not "system ist or something like that."

  When you choose to start safe mode and you can see all the stuff being loaded and the system crashes, which is the last line on the screen to say?

  If you attached an external equipment, especially USB devices, disconnect everything and then you can see if things seem better.

  If you get an error message windows system config, exactly what he says?

  No error paraphrased messages please!

  It was something like this:

  Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM

  Which usually indicate some sort of corruption of system files may be a loss of power, aborted reboot or abnormal termination? (This includes the plug pulling, buttons power and removing the battery).  None of this seems familiar?

  If you can boot from a CD, you can create a CD bootable XP (no XP media required) Recovery Console and run chkdsk with correction of errors on the afflicted to start System.

  Here's how:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget what you have (no XP media required).

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD (do not install UniBlue or the Ask Toolbar - never!):

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.