Windows thinks that it is not enabled.

Similar Questions

• Each tme I start windows mail that it does not load

  Original title: windows messaging

  each tme I start windows mail that he does not, I have to restart three or four times before the emails through

  And this error message?

• dkafox1 lost all THE WINDOWS updates that THEY ARE NOT INSTALLED UPDATES

  Original title:

  dkafox1 lost all THE WINDOWS updates that THEY ARE NOT INSTALLED UPDATES, more problems with windows update. May HAVE a PROBLEM WITH REGISTRATION BUT DO KNOW NOT if this msi I HAVE HELPED.

  I have windows 7 x 64 Version 6.1.7600.16385. My windows update has only downloaded and installed a fix (KB947821 on 22/03/14. In the event err log # 2147942487command line: "C\:WINDOWS\SYSTEM32\WUSA '". "»» "EXE" "Windows Update Troubleshooter said" search for missing or corrupted files. I did a sfc/scannow and everything was fine, that the settings are incorrect... Went to computer management by looking at the windows log. Event ID was found in respect of the implementation of 3. Looks like I've lost all my updates. Window update is only showing KB947821 HOT of difficulty. All my other downloading updates for the past two weeks included Microsoft Office Update that I can't see anything there all gone. I check the installed updates and 14 updates that don't settle all gone. Windows Update indicates any problem or error #. It says Windows update installed "Never". I tried the solution to the difficulty of corruption problems MSI software update registration. Help I don't know where to go from here. I ran the windows Memory Diagnostic tool, which came with no error. In the community he sent me to back registry which I do not know how to do. Can I save on my hard drive or another source. He says type reedit32.exe. I have the windows 7 registry editor wants me to save the registry key or subkey > I do not know what files to back up or export. I'm not computer savvy, but I do what I can do better. Had problems with windows update not install and now not download or install 2 MOS. So where and how can I know what updates I need after that this problem is corrected.  Thank you

  If you want Office 2007 updates to appear in the installed updates again, you would need to uninstall/reinstall Office 2007 and install all the updates again.

  Assuming that Office 2007 is installed & working properly and no update is offered when you run a manual check for updates now, you might want to leave enough alone (that is, do nothing) - then see if the 2 updates for Office 2007 SP3 be released next Tuesday (a) receive, (b) successfully install and (c) are listed in the installed updates later.

  PS: The possible causes of the problem are messing with registry cleaners, messing around with the Software Distribution folder, and the fact that it was a computer refurbished when you bought it.

• I downloaded just standard CS6 for windows and that you do not have an .exe for the installation file. I have a 7z file and an application file that I used to extract the 7z files. I am now at a fixed support.

  I downloaded just standard CS6 for windows and that you do not have an .exe for the installation file. I have a 7z file and an application file that I used to extract the 7z files. I am now at a fixed support.

  Hello

  You must download the file [.7z] 1 and 2 [.exe] file. Once downloaded, keep both files in the same folder.

  Then run the .exe file and it will extract the CS6 Installer for you. With which you can install your software CS6.

  For CS6 direct download link: https://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

  You can also check this link: https://helpx.adobe.com/creative-suite/kb/cs6-install-instructions.html

  In the case of additional assistance, feel free to contact support by calling/chat for cancellation requests and billing queries:

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  I hope it helps.

  P.S. If you use the adobe forums, please check useful/correct responses of staff or assistance, if there is.

  Concerning

  Ludo has

• My computer windows vista laptop says that it is not enabled. When I try to 'reactivate' using the code stuck to the computer, it fails. What can I do?

  So, to my office, I have a laptop HP under Vista Home Premium x 86.  All of a sudden he says he is not enabled.  All my attempts to activate it using the code stuck on the PC itself did not work.  I need to get this computer to work properly, and I can't risk having a problem with him on the road.  My attempts to contact HP only ending with them telling me that they could remote virus scan and it would cost me over $ 100.

  I also bought a vista "anytime upgrade" and it won't let me even upgrade the system without the activation code.
  Help!

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  -Product key of letters and numbers-

  Not confused the letter B with the number 8, the letter Q with the letter O.
  the letter G and the number 6.

  A, E, I, O and u are not used.

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone

  1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
  then by clicking on activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  How to contact a Microsoft Product Activation Center by phone
  http://support.Microsoft.com/kb/950929

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Learn about Activation:
  http://TechNet.Microsoft.com/en-us/library/ff793423.aspx

  J W Stuart: http://www.pagestart.com

• Windows thinks that my DVD drive is a floppy drive

  I've had my computer for almost 3 years now without problems and now my computer decided that my dvd drive is a floppy drive. I have no floppy drive in this computer.

  I am running windows vista ultimate, 32 bit. My dvd player is an Asus - model unknown, bought 3 years ago

  Device Manager can't find the drive, but does not have a floppy drive

  ->, I uninstalled the floppy drive he sees and has attempted to use the scan for hardware, but it cannot find the diskette again. Tried to restore the computer by using the system restore, which did not work. The player turns on and turn when I put a disc in but nothing and does not pop up in my computer (which only shows my hard drive and a non-existent floppy disk)

  After trying to use demon for a drive emulator tools so that I could actually stop using the physical disk that I don't want to wear them first noticed the problem. Daemon tools has been uninstalled from the restore points, I used so I don't think that is the question.

  Any help would be appreciated.

  Thank you

  Bob

  I did what you suggested and none of it worked. Thank you for your help and I have a solution that worked well.

  I turned off the computer, unplug the drive (power and sata of course), computer turned off, shut down, reconnected and when I restarted it again, my drive was normal.

• recovered to previous windows because of an error during the installation of an upgrade of windows 10 now my windows 7 Ultimate edition is not enabled

  before installing an upgrade to windows 7 ultimate windows 10. my version of windows has been activated and genuine. but due to an error when installing windows 10, blue screen appeared and my pc was recovered back to the previous version which is windows 7 ultimate but now its true this is not enabled and im nt able to upgrade to windows 10 as well...
  in the system properties it says 3 days to go to automatic activation I waited for 3 daysbut it said another 26 days to automatic activation.
  What does that mean?
  How can I solve this problem?

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag tool

  (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 )

  Once saved, run the tool.

  Click on the button continue, which will produce the report.

  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.x

  -in your own thread, please

  Please also state the Version and edition of Windows cited on your COA sticker (if you a) in the case of your machine (or inside the battery compartment), but does NOT quote the key on the sticker!

  http://www.Microsoft.com/en-us/howtotell/hardware.aspx

• Cannot update Windows / / Windows think that its true / / Windows Explorer crash

  BACK STORY: Windows told me that my old HDD is faulty and I need to replace it. I therefore created a system disk image and restore the HARD drive fault and buy a new. I have restored my image for the new HARD drive, and apparently some of the system files that got copied have been corrupted.

  I'll HAVE PROBLEMS: The main problem I encounter is that windows will not update. I'll go to the start menu and try to choose windows update and it will sit in the windows Explorer screen blank until it crashes. This is the only time that windows Explorer will crash it's fine otherwise. If I have correctly interpreted my read, inability to update windows is caused by the software is is not authentic. Which brings me to the next point.
  Windows don't think that it is authentic, even if I see the CDKEY in the system information window and when I hit "Activate Windows" in the search bar in the start menu, that it says "Activation was successful." I get a window saying: http://imgur.com/OQlZDhR I thought that I humor the system and try and validate it although this Web site: http://www.microsoft.com/genuine/validate/DownloadValidationSupport.aspx?displaylang=en when I try and install the software Validation of Windows, I get this error: http://imgur.com/8lb0abR 
  TECHNICAL issues: I bought my computer from a major retailer with Windows Vista, he came with an OS disk. I've then upgraded to Windows 7 a few months after it is released and subsequently lost the installation disk that really means nothing because it is not the full operating system. So, indeed, I have no way to find my drive upgrade for windows reinstall/repair, which is what I would have done originally.
  What I DID: I ran the command " Sfc/scannow " to the command window and he returned with: http://imgur.com/OD6WygE when I try and access the .log for this, he tells me access denied and I can't access the safe my life.
  QUESTION: Is there something I can do to fix this? Something like a Windows download different difficulty tool or something else that I don't know who's going to help me fix the windows before going outside and by a new Windows 7 disc to repair the files?
  Thank you for your time
  > Simon
  EDIT: Tried to start in safe mode, I can't even open the windows update screen, just, it is there and does nothing.
  Edit2: Run the Microsoft Genuine Advantage diagnostic tool, such as requested by another user, post results later.

  The common cause for these mismatches is a defective Intel Rapid Storage Tech driver

  Download and install the latest version of...

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=22194

  You need

  iata_enu.exe

  Restart then run another MGADiag report and view the results.

• my computer told me several times this update for windows xp that kb248119 could not be updated

  My computer tells me that this update of security for windows xp that kb248119 has failed. What should I do?

  Hi StephanyMiller,

  1. Did you the latest changes on the computer?
  2. You are able to successfully install the other updates on the computer?
  3. You have security software installed on the computer?

  The KB number update you provided is incorrect.

  View update history to know which update is not installing.

  (a) open Windows Update by clicking Start , all programsand then click Windows Update.

  (b) in the left pane, click view update history.

  (c) to view more information about an update, double-click it.

  Once you know the update's KB number then visit the Microsoft Download and put the number in the search box, download and install the update manually.

  http://www.Microsoft.com/downloads/en/default.aspx

• Photosmart 6520: HP Photosmart 6520 is connected but Windows says that it is not

  I'm changing the name of the printer.  It is clearly linked because I can scan and print.  But when I try to change the printer properties or preferences, Windows indicates that printer properties cannot be displayed, check the name of the printer and make sure that the printer is connected to the network.  For some reason, there are two heads displayed outside the printer.

  Hi @Draftsman,

  Welcome to the Forums of HP Support!

  I see that you are unable to rename your printer HP Photosmart 6520 in devices and printers. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution" if I helped successfully will solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand the frustration you feel. What I see, it seems that the printer is shared from another computer on the network and you do not have sufficient permissions to rename the printer.

  If you have shared the printer from your computer, you will get another warning indicating that the printer is shared, which is not what you have received.

  The two heads human icon tells me that the printer is shared on the network. If this printer is set up wireless you have no need to share the printer in this way.

  If the printer is shared from another computer on the network, this computer would need to rename it.

  If you are not sure and the printer is wireless, add the printer and do not select the option to share the installation,

  If you need assistance, please let me know the instructions above. Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• Windows think that there is a second monitor

  Hi all

  I have searched through the forums to see if anyone has experienced this before, and it seems that people have but solved the problem in a few simple steps. I tried as well.
  Here's the question (on Windows 7 64-bit):
  Window "think" there is a second monitor attached to him off to the right.
  I go to my properties of screen resolution and it shows only one display.
  However, I can leave my mouse to the right and see that it continue.
  It's as if he thinks there is a second monitor attached.
  This causes problems with my colors and Aero.
  Windows is stuck in 16 bits, even if all my properties all are set to "true color (32 bit)".
  I ran solve them problems with transparency and other Aero effects Wizard and he returned with two questions:
  1 color depth is set too low (once again I looked at all the properties everywhere and they are set to 32)
  2 desktop Window Manager is disabled (looked in windows services and is being run/auto start)
  I started in safe mode and reinstalled my drivers (Intel HD3000) graphics card
  Any help would be great as using 16-bit icons in all my applications is terrible.
  Update, dug around the Aero results troubleshooting and I see the following:
  Color definition of requirements:
  Depth: 32 bits
  Required: 32 bits
  Depth: 8 bit
  Required: 32 bits
  Looks like my 'ghost' monitor is running in 8-bit, thus avoiding to run Aero.

  Hi all

  I have searched through the forums to see if anyone has experienced this before, and it seems that people have but solved the problem in a few simple steps. I tried as well.

  Here's the question (on Windows 7 64-bit):

  Window "think" there is a second monitor attached to him off to the right.

  I go to my properties of screen resolution and it shows only one display.

  However, I can leave my mouse to the right and see that it continue.

  It's as if he thinks there is a second monitor attached.

  This causes problems with my colors and Aero.

  Windows is stuck in 16 bits, even if all my properties all are set to "true color (32 bit)".

  I ran solve them problems with transparency and other Aero effects Wizard and he returned with two questions:

  1 color depth is set too low (once again I looked at all the properties everywhere and they are set to 32)

  2 desktop Window Manager is disabled (looked in windows services and is being run/auto start)

  I started in safe mode and reinstalled my drivers (Intel HD3000) graphics card

  Any help would be great as using 16-bit icons in all my applications is terrible.

  Update, dug around the Aero results troubleshooting and I see the following:

  Color definition of requirements:

  Depth: 32 bits

  Required: 32 bits

  Depth: 8 bit

  Required: 32 bits

  Looks like my 'ghost' monitor is running in 8-bit, thus avoiding to run Aero.

  Very well... Figured it out.

  Start > Device Manager > graphics cards
  I saw there are a few things in here, one being "Air Display Adapter.
  Air is an application that allows you to use your iPad as a second monitor.
  I right click on it, click 'disable' and restarted. Everything is good in the world.
  According to me, the issue was the last round of Windows updates to update my video card drivers and Air screen only plays nice with drivers updated.

• Suddenly, Windows said that it is not authentic

  My computer is hacked.  Activation of Windows technology made me know that I am not under Genuine Windows.  I bought Windows 7 and 3 months later installed an upgrade.  Windows activation technology told me to buy Windows, even if I already bought.  Does anyone know if Microsoft would get directly involved in this situation that someone is poorly represent their name and their software.  Do I need to buy again or Microsoft will replace due to circumstances.  Your comments please.

  Thank you

  Joe Puntureri * address email is removed from the privacy *

  PS When I connect in live.com, the browser's address has the word shared in it.  Is it possible, that I'm being re-directed to a site that allows sharing all my e-mail messages?  Some of my Excel spreadsheets have been removed from my files and some have been corrected with inserted incorrect information.

  Ignore my last post, if you notice - it is no longer relevant.

  Your problem is simple (hopefully).

  This may simply be caused by a bad set of drivers of technology Intel Rapid Storage Technology-

  Intel rapid storage driver installation

  try to download and install them from here - http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=2101&DwnldID=21730

  (you want the download of iata_enu.exe)

  Once complete, please restart twice, then after another MGADiag report.

• Photoshop CS5 Extended on iMac thinks that there is not enough memory

  When I try to open a tiff file of 42 MB in Photoshop CS5 extended on my 2.16 GHz iMac Intel Core 2 Duo with 3 GB (OS X 10.6.4 64-bit), Photoshop displays a window with the message "could not complete the command open because there is not enough memory (RAM live).»

  The same file can be opened easily in Photoshop CS2 on my PC of 1 GB.

  Performance of Photoshop preferences are set on let PS 2013 MB (70%).

  I've read several PS performance guides user to one, but not available.

  Can anyone here help me? Thanks in advance!

  Kind regards

  Matthew

  You are on a macintosh computer, there is a command line tool called tiffutil that can dissect a tiff file.

  tiffutil - verboseinfo file.tiff

• I can't open the CC photography plan and I have a plan updated! It is said that it is not enabled in any device!

  I have a plan of creative photography of cloud since August 2015 (and also an Illustrator). Yesterday I updated my account and monthly fee was charged. everything is normal. It is at this time, I was working normally on lightroom and photoshop and out, photoshop stops and I get a message that I do not have CC photography associated with my account plan. I connect on Adobe's Web site, the payments are up to date, BUT now he says that the Plan of photography CC is not activate in any device. I've tried off journal / log on several times and it didn't work. I even tried to put a different credit card and nothing! I uninstalled photoshop and now it only let me install the trial version. Why is this happenning! I'm trying to understand why, but I can't. Please, anyone? Help!

  Back to the https://helpx.adobe.com/manage-account-membership/cc-reverts-to-trial.html of the trial

  or

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Windows 8 suddenly said that it is not enabled.

  Hi, I bought my PC several months there is a DinoPC that came with windows 8 is installed.

  Everything was fine until a couple of days, when the PC asked me to activate windows. A bit strange given that I have already done. So I go to activate and he says: "can not activate at this time, try again later", that does not change no matter how much later, I try.

  Under maintenance/security in Control Panel, what is he saying

  "Activating Windows: Windows is enabled, view the details of activation.

  But when I click on see details it says "Windows is not activated, Windows can not be activated right now" etc.

  Current version: Windows 8
  Current product key: *-VMFD7

  Which is the key that I got when I got this PC from the official license sticker that came from the CD Pack.

  If I do a run slui 3 and enter my correct valid key it is said initially. "Your key works! continue when you're ready. " Then I try to turn on and I get the error

  Code: 0x800700d8 this version of %1 is not compatible with the version of windows that you are using. Check your computer system information and contact the editor.

  If I do a run slui 4 for activation by phone, I enter the United Kingdom in the first stage then. "Year error has occurred, 0x800700d8 this version of %1 is not compatible with the version of windows you are using.

  So I can't even at a stage of phone activation, all this despite the Panel saying my Windows is activated.

  How can I fix?

  Press the Windows key + X

  Click prompt (Admin)

  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system

  Try to activate again.