Windows Update Agent 7.6 stopped working and causes system late

Similar Questions

• Receive the error "Windows Media Center Receiver Service stopped working and was closed" after the video card replaced

  I have a HP computer with Windows Vista Home Premium (32-bit) Service Pack 2.  He has a VISX PureTV tuner card and already had an NVidia GeForce 8400 graphics card.  This Setup has worked well for 2.5 years until what the graphics card died last week.  It has been replaced with an ATI Radeon HD3450 and both all Windows updates have made current.  Since that time, the TV tuner did not work.

  When you sign in to an account, it gives the error message "Windows Media Center Receiver Service stopped working and was closed".  I can use Media Center to watch the recorded video before, but if I try to watch live TV he hangs up and close Media Center.  If I try to configure the TV connection in Media Center it tells me that there is no tuner card.

  I looked at the map and see no problem and I tried it back in place.  He has the most up to date drivers (so does the new Radeon graphics btw).  I tried "Uninstall" in the Manager of devices and then put it back, but it was not good.

  "Windows Media Center Receiver Service Stopped Working and was closed" I tried all the fixes I've seen this error.

  I tried all the things I saw here and elsewhere related to this issue.  I did a "clean boot" with all non-Windows services and the disabled startup process.  He always did the same thing and gave the same mistakes.  It seems to be linked to a Windows service, and I hesitate to begin deactivation to track down.

  I ran 'sfc' in mode 'cmd' and he found no problem and none of the files to be fixed or could not fix.

  In the list of services, I changed the login for "Windows Media Center Receiver Service" to "Local System account", Local Service, Network Service and individual accounts, but no permits.

  I'm afraid I'm at the point of having to reload the Vista, but I don't know how to do this and want to avoid at all costs.  I don't have the recovery disks and software.  Is this enough?  Can I reinstall from the recovery disks without wiping everything aft of the configuratiion with which it was delivered?  I guess personal files will be OK (although I don't know this for sure), but I'm afraid I'll have to reinstall other applications, my family has developed over time and perhaps lose the media protected by DRM licenses.

  Someone has encountered anything like this or have any suggestions?

  Well, I finally stumbled into the solution.  It was caused by a conflict with another application.

  A few weeks before the card failure I had installed a program called video capture Replay Video Capture that I had bought a few months ago and never used.  However, at this time where everything including the TV tuner and Media Center worked well that's why I associate the problem with this software.  The problem comes after the system is rebooted the first time after installation.  In my case, it has not been rebooted until a few weeks later as part of the recovery of the fault of the graphics card.  Suddenly, the TV tuner did not work and I get the error messages mentioned in this title of the thread.

  I was at the end of my rope with this and was just to clean your system to do a reformat and reinstallation.  I uninstalled the Replay Videa Capture program to move it to another computer, and when you restart the computer I noticed that the error message disappeared.  Of course I went to the Media Center and could set up my TV tuner card and watch television.

  Looking for some info on this conflict, I found the following. (http://forum.applian.com//showthread.php?847-Conflicts-between-RVC-and-XP-Media-Center-OS&s=c0aec9897b51d550c47b919e73e59bfc)  It is difficult to say who is at fault in the present.  I'm sure that Microsoft accuses Applian for the encoder to mpeg (mcm2ve.ax) used in Replay Video Capture, while Applian says that the problem is a Windows process (ehrec.exe) that works all the time, hogging the tuner on the system device.  According to Applian other products similar to theirs have this conflict as well due to the process of Windows.

  Fortunately, there is a solution in this case.  Applian has released a new version of Replay Video Capture (version 4.2) that uses a different mpeg encoder and eliminates the problem.  Given the surprising lack of info about it on the Microsoft Web site, I wonder how many other people with this unresolved issue dealing with the same thing as me.  If you're like me and you don't usually need to reboot your PC for a few weeks at a time, you may never know to associate the problem with the application.  What a waste countless hours trying to diagnose, and most disconcerting, that's what I was about to go through a reformat and reinstall because of this.

  Thought I'd post here my problem resolution in the hope that it might help someone else.

• Windows 7 Pro 64, windows update/Defender/firewall has stopped working. Firewall gives me error 0x6d9. Defender gives me 0 x 80070424.

  Original title: Windows 7 Pro 64, windows update/Defender/firewall has stopped working.

  I have Windows 7 Professional 64 bit installed, after the time of my last updated 31/7, my windows update has stopped working, and no so Windows defender and firewall.  Firewall gives me error 0x6d9. Defender gives me 0 x 80070424.  Update Windows to 7.31 was an update of the Defender, however, windows update will not give me the option to uninstall this update because the Defender has completely disappeared from the prompt that allows you to choose which puts up-to-date to uninstall. Is it possible to manually remove somewhere else?

  I ran SFC/scannow and I WAB32res.dll has been altered, so I copied the file on my windows 7 CD for 64 Professional (from program files/common files) and copied and replace my program.files/common files one.  I restarted the SFC and the same error occurred.  I had 5 errors like this:

  2012-08-03 19:15:59, 000002fb CSI Info [SR] cannot repair the military record [l:24 {12}] "wab32res.dll" Microsoft-Windows-WAB-Core, Version 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 = (9), the Culture neutral, VersionScope is 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch. "

  I also ran Microsoft Safety Scanner Scanner, he finds 16 errors and fixed them (I saved the names), but even after I reset the computer my Windows Update/Defender/firewall STILL does not work!

  Anyone have any ideas? Especially how to fix 'wab32res.dll"maybe that I recorded it in the wrong place?

  I noticed there is one in each 'program folder' folder (program files x 86 and regular for 64 bit).  Is also wab32res.dll somewhere in system32?

  Thank you!

  Hello
   
   
  Method 1: See the following steps:
   
  a. at a command prompt, type the following command and press ENTER:
  takeown /f Path_And_File_Name
  For example, type takeown /f E:\windows\system32\jscript.dll.
  b. type the following command and press ENTER to grant administrators full access to the file:
  ICACLS Path_And_File_Name/grant ADMINISTRATORS: F
  For example, type icacls E:\windows\system32\jscript.dll/grant administrators: F.
  c. type the following command to replace the file with a good copy of the file:
  Copy Path_And_File_Name_Of_Source_File Path_And_File_Name_Of_Destination
  For example, type copy E:\temp\jscript.dll E:\windows\system32\jscript.dll.
   
   
  Method 2: Since all this started after a Windows Update, restore the computer to a date where updates are not installed.
   
  Reference:

  System Restore: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions
  Method 3: After System Restore, windows updates are available again, put the computer into State of startup in minimum mode and then allow Windows Update and see if that helps.
   
  Reference:
   
  A clean boot to test if any element of service or third party application startup is causing this issue.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135
   
  Note: when you're done to diagnose, follow step 7 in the article to start on normal startup.

• Windows Media Center Receiver Service stopped working and was closed. A problem with the application to stop functioning properly. Windows will notify you if a solution is available.

  Started getting the error Windows Media Center feared about 3 weeks ago.  I have tried the MS fix, reflected on the web for solutions, have run sfc/scannow (no violation of integrity) and nothing works.  Cannot restore system it's been 3 weeks.
  System was working fine 1 day and then bam... error messages began to appear.  I can always go into Media Center and listen to music or watch recorded shows.  I just can't watch TV or record something again.   I checked the Device Manager - material and everything works fine. Need help please...   Thank you.

  I guess that's the article that you are referring to?

  Error message when you start a Windows Vista-based computer: "Windows Media Center Receiver Service stopped working and was closed".
  http://support.Microsoft.com/default.aspx/KB/936229

  This site has some good ideas for you to try.

  How to fix the Windows Vista registry entries and files Media Center
  http://blogs.msdn.com/astebner/archive/2007/03/16/how-to-repair-Media-Center-files-and-registry-entries-on-Windows-Vista.aspx

  "Windows Media Center Receiver Service... "Error
  http://thegreenbutton.com/forums/p/50233/223005.aspx

  http://www.Google.com/search?q=Windows%20Media%20Center%20Receiver%20Service%20stopped%20working&hl=en&RLS=com.Microsoft:-AU & output = search & TBS = rcnt:1 & tbo = 1

  See if the System File Checker can help you?

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212/#appliesTo

  See if you can isolate some processes of third party as the culprit?

  310560 How to troubleshoot by using the Msconfig utility in Windows XP
  http://support.Microsoft.com/kb/310560

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/default.aspx/KB/929135

• I get an error at the start of the ambient light.  Windows indicates the RL has stopped working and the banner "catalogue Lightroom-opening: OYL6BMP.» LRCAT displayed?

  I get an error at the start of the ambient light.  Windows indicates the RL has stopped working and the banner "catalogue Lightroom-opening: OYL6BMP.» LRCAT displayed?  I reinstalled LR but no change.  Anyone can shed light on this issue?

  Gary

  The only effective solution is to reset the file preferences... it has been damaged by trying to create a catalog with the invalid jpeg.

  The instructions to reset the catalog are here: given to zero (or "Screw up") the preferences of Lightroom - Lightroom Forums file

  When you have done this, place you and double click on the correct catalog and LR should then start OK.

• The Windows Update Agent 7.4.7600.226 and impossible to verify updates

  Given that 13 of November were not able to update Windows. Updated Windows Update Agent 7.4.7600.226 failed and statement "Windows cannot check updates' appearred. Error code 80070643 received. I have Vista Home Premium 64-bit.

  I tried many things and even worked with Microsoft customer Supportb without success. When I restart my computer, it tries to configure the updates, but does not nd comes back to the previous configuration. I also tried to download the last Agent to update from the Download Center, but it fails and gives me the 80070643 error code.

  Does anyone have a solution for this?

  jhefer3 wrote: My virus protection and Internet security is provided by Norton 360, is underway and is updated automatically successfully.

  I used the fix tool, but not in the aggressive mode. I have not tried a reset because many of the reset of values seem to be for 32-bit machines.

  Another version of Norton 360 (i.e., N360 2008) has already been installed on the computer?

  A Norton or McAfee free trial come preinstalled on the computer when you bought it?

  The FixIt and reset are the same thing. Open an instance of IE 32 bits (not IE 64-bit) for http://support.microsoft.com/kb/971058, click the FixIt icon and choose Aggressive mode this time. (Believe me, the utility "know" that you are running 64-bit Windows.) ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• "Windows Media Center Receiver service stopped working and was closed" - Windows Vista Home Premium SP2

  Several times, I get the error message "Receiver Service Windows Media Center has stopped working and was closed".  Windows then search a problem and suggests that I run the update.  I run the automatic update and am completely up to date.

  Any ideas of what could be the cause?

  Thank you
  jbthorsen45

  Then, I found my problem.  I have installed the Tivo Desktop Plus.  The codecs it uses to convert to different formats somehow in conflict.  So, I had to rename some of the files and he immediately recognized my Tuner card and Media Center is back to life.

• Windows host process (Rundll32) has stopped working and the Manager device raises the error code 43

  Original title: Installation files

  I need to know how to reinstall a corrupted file. It's only an individual file which gives me the problem. I don't want to reinstall the entire windows file just to retrieve a single file. The file is the file that controls the video card (rundll32.exe).

  Hi Richstan06,

  Step 1: Run the fixit available in the link below and check if that makes a difference

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/GP/hardware_device_problems/en-us?EntryPoint=lightbox

  Step 2: The computer in the boot and a test

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  If the problem persists, you can consult the documentation of the material for more information on diagnosing the problem.

  See the article below, which deals with a similar question

  Error message when you try to configure an audio playback device disabled in Windows Vista: "Windows host process (Rundll32) has stopped working.

  http://support.Microsoft.com/kb/953916

  Thank you, and in what concerns:
  Ajay K
  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Explorer says he has stopped working and it does not restart. I tried the system restore, but will not return to explore

  I can't get rid of this pop up asking to restart or online solutions. I chose these two options in the last days and even managed to get into the restoration of the system (not easy without windows), but nothing works and I'm about to throw this pop up window with my laptop.

  '

  Hello

  References to Vista also apply to Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or
  Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7
  http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Think about it an absolute must - manually update your drivers.

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

• Internet Explorer has stopped working and causes windows close program Pavilion QU297AA #ABG

  I have a HP Pavillion QU297AA #ABG running on Windows 7.  Since the first day of installation I click the links and get the message

  Internet Explorer has stopped working.  A problem caused by the OTS program works correctly.  Windows will close the program & warn you if a solution is available.

  I know this isn't not my internet as my laptop when used on my connection Wireless at home I have this problem & no more than my previous desktop that I have improved.  Also, I don't think I have a virus I have an antivirus AVG (the paid version) set up scan to run daily to detect problems.  It's so frustrating can anyone offer a solution I have had this problem since I plugged in my new office building.

  Hello

  Please find the link given below might help you solve your problem.

  Troubleshoot Internet Explorer

   

• Windows Media Player 11 has stopped working and will not initialize

  Windows Media Player has exceeded the work.  I rebooted version 11 on the Microsoft Site, but it won't always initialize.  Help please.

  I suggest that you run the troubleshooting Microsoft FixIt for Windows Media Player.
  Click on the link below.
  http://support.Microsoft.com/mats/windows_media_player_diagnostic/en-us

  If this does not help, please reply back with error message so that we can help you.

  Thank you

  Marilyn

• Download assistant does not work and caused system problems

  Download Wizard jumps to halfway point and there it is.  I use Win7 and have run as administrator.  Now, my machine will not be stopped correctly, and it's new!  I'm very unhappy.  What is going on?

  I answered your previous post to http://forums.adobe.com/thread/1152167.

• Windows host process Rundll32 has stopped working and was closed for 2 months now?

  What this means and why not, I received snap problem whatever it is? I don't know what that means he started to say 2 months when I start my computer, the only difference I noticed is I can no longer view or change my pictures from picture windows or windows live that looks like I have a Jammer or something that looks like this photos have no color wavey lines and blurry? can someone help me? address email is removed from the privacy *.

  Hello

  Rundll32.exe is a system file which loads the required files library (.dll) for a routine on request. From what you describe, it seems that the library file, you are trying to load to support the display of images is corrupted or damaged. Open a command prompt by typing CMD in the line of departure and search, then right click on the menu entry that appears and choose "Run as Administrator". Click on continue in the UAC prompt. From the command line, run:

  sfc/scannow

  When done, exit the command prompt and restart the system normally. Then try to use all the measures you were doing that causes the error to appear. If it happens again, please post back with the exact text of the error (you can use the event viewer if it flashes too fast).

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• After 5 minutes, I get a message "Windows host process for Services stopped working and was closed"

  I get this message on my Vista Home Premium SP2 system.  I installed SP2, last week when it first came out and this message began today after the reboot.  I rebooted 5 times and I still get this message after 5 or 6 minutes.  I did the reboot after the installation of Microsoft Patch KB911895.  Any suggestions greatly appreciated.

  Use his computer to boot. Disable all third party applications start to rule out the possibility to be a software problem.

  Go to google.com and search for Autoruns. Download and install the tool and disable all third-party software. Reboot the machine and see if you still receive the error.

  Today, it was a good day, I didn't have to use my AK.

• Adobe Flash Player Update Service 11.6r602 stopped working and was closed

  This pop-up appears constantly, what can I do

  This pop-up appears constantly, what can I do

  It is the English version of the Microsoft Community. Please click on the globe icon to the world (change region) at the bottom left of the screen, then select your preferred language. Now ask you question once again.

  If you can't find a suitable language, please go here:

  http://support.Microsoft.com/common/international.aspx

  for other international support options.