Windows Update components should fix

Similar Questions

• How can I fix windows update components

  says I need to install windows update components, how can I solve this

  Access the article KB971058 via Internet Explorer (only)

  If no malware is present - How to reset components Windows Updates?

  http://support.Microsoft.com/kb/971058>

  Download and Save the 50202 Fixit of the above page.

  Close all the open programs and browsers prior to running the Fixit.

  Given that the downloads fail, when you run the Fixit choose it is the default mode when you run it the first time.

  When he finished, check if download updates now.

  If the updates are still not download after you run it, then run it again and choose his Aggressive mode.

  Then reboot and see if the download updates now.

  UTC/GMT is 15:44 on Sunday, January 22, 2012

• Windows Update problems - reset windows update components - XP SP3

  have 3 computers in the House that was attacked recently.  2 that I have fixed.  It has been difficult.  Registry does not show same problem had 2 other computers. has run the virus scan and it crashes.  Cleaned hard drive. no help. automatic update of windows I tried and received the error 80072eff

  By section 971058.

  Attempt to auto-correct and received the error 80072eff.

  has set manually the registry and consisted of the following who do not register and I'm afraid to go forward with the process without further direction.  pls let me know how to handle this and or if I should proceed to the next steps in the manual registration process.

  Errors

  Mshtml.dll, but charged in DLLRegisterServer was not found;

  c:\windows\system32\wucltux.dll, LoadLibrary failed - specified module could not be found.

  c:\windows\system32\wuwebv.dll, LoadLibrary failed - specified module could not be found.

  all other dll registered very well.

  Next steps not yet made

  Your help and your tips are appreciated.

  You may encounter temporary connection [e.g. 0x80072EFF] errors when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  How to reset the Windows Update components?
  [Skip the section to APPLY to if Win7;] Access KB971058 via Internet Explorer (32-bit) only. Run the difficulty in DEFAULT and AGGRESSIVE modes, then restart]
  http://support.Microsoft.com/kb/971058

• The Windows Update components fail to install

  This morning I noticed that in the past 2 windows update components were not installed.

  The table below shows the number of the knowledge base for patches and their associated error codes.

  Title	Knowledge Base number	Error code
  Update for 2007 Microsoft Office System	KB977724	80246001
  Update for Windows Defender definition	KB915597	800705 B 4

  Should I worry, and if so, are there ways to get these updates installed?  Have one or two of these updates were replaced by some other updates, and if so, how will I know that I have.  If the initial update fails, is windows update smart enough to try to get the latest updates installed, or require a response.  In other words, can I go back to determine what more recent updates will address these issues?

  ' > http://support.microsoft.com/kb/555375.

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates

  http://support.Microsoft.com/kb/836941/en-us

  How to troubleshoot Windows Defender definition update

  http://support.Microsoft.com/kb/918355/en-us

• Windows Update components

  How can I fix windows update components? I ran the fix it Center and he could not fix the components. I am running Xp home.

  Try following the instructions in the following article.  If it's different than what you've tried before, you can leave the "FixIt" program try to fix it.  If it appears even as you did before, then reject the Fixit program and follow the instructions in the section "Let me fix it myself" (you need to click a link for instructions to appear).  I met several programs FixIt who don't work too well but the fact of the manual process.
  Worth a try.

  "How to reset Windows Update components"
    <>http://support.Microsoft.com/kb/971058 >

  HTH,
  JW

• How the windows update components Lair? and how to configure update components?

  I can't update or install any application from my store of windows8.

  Then I try to fix this after I made the resolution of the problems that they

  will display the result is windows update components must be repaired or

  one or more components are configured incorrectly. What is the solution for

  This problem. How to fix windows component update?. How to he set up?

  Hello

  Thank you for helping me solve my problems on wins 8 apps store. After your replay I check my entire system, installed applications and settings, and then I see a problem with my Norton internet security. And I solved this problem. Now, I have no problem with my app store.

• A fix with one click for Windows Update problems - how to reset the Windows Update components?

  I can't check, download or install updates through Windows Update.  Help!

  Microsoft has released a new "Fix it" solution that should automatically solve your problems with Windows Update.  Just click on the button below and follow the instructions.

  
  Solve this problem

  For more details on this solution, read the article here.

• Error: The Windows Update components must be repaired. One or more components of Windows Update are configured incorrectly

  Original title: Windows Ypdate default data locations have changed. By MS Fix - it = need to change the locations of update of widows to the default settings of Windows. How do I do that?

  All the Windows security updates fail since late May. Used MS Fix Center, issued found = "components Windows Update must be repaired. One or more components of Windows Update are configured incorrectly. "Need to"places of Windows Update change to the default settings of Windows. How can I do?

  1 McAfee Total Protection, 27/02/2013 expiration date. No other anti-spyware or firewall, only MS Windows firewall.

  2. any other Norton or McAfee has never been installed.

  3 McAfee is installed in the PC.

  4. no
  4B. no
  4 c. [all except KB2718704]
  4 d all found.
  4th. KB2393802 12/02/12 and Ko 971029 3/17 / 12.

  5. ask to Google Chrome

  6 Java is U.5 V.7.

  7. do not use Registry cleaners.

  8. never install repair or cleaning set

  Fact: McAfee (and Norton) applications are notorious for not not upgrade (or uninstalling) itself. Evidence for many years of McAfee "leftovers" is the troublemaker more likely here.

  Roll up your sleeves & cross your fingers...

  ACTIONS

  [You will see that there is quite a bit to do this, you may want to print these instructions for reference offline. Perform ALL steps below in a 1 meeting - allow a minimum of 1 hour.  Don't skip the steps!  [Note: If a step said to restart, restart! ]

  1. click right on the following link to download the McAfee Consumer products Removal tool, select SAVE as... & download the utility on your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your key of handy product, uninstall McAfee Total Protection via Start | Control Panel | Programs: Programs and features.

  4 IMPORTANT! -Online make sure that the Windows Firewall is activated immediately after the reboot!  (Should be done automatically, but I want you to check.)

  NB: Now you're "working without a net": do not to ANYTHING else online (e.g., navigation reading E-mail; cat) until you have finished step #7 below!

  5. double-click on the file that you saved in #1 above to run the utility. DO TAP not your keyboard until the race ends, then restart.

  (6 do a clean install of McAfee Total Protection (using your product ID, if need be) & restart). If you purchased the software directly from McAfee, go to https://home.mcafee.com/Secure/Protected/Login.aspx to connect and download your software.

  Note: McAfee Total Security includes a firewall, Windows Firewall should be disabled now (that is, you shouldn't have too much active).

  7. on several occasions the McAfee application manually update until you get a "not more than updated" or similar prompt.

  8A. Start | Settings | Control Panel | Add/Remove programs. Set Program Access and Defaults: select (check) the CUSTOM [<>] configuration option, and then click the arrows pointing to the far-right | Browser: select "Internet Explorer" here (to not "use my current... »).

  Illustration: http://teamtutorials.com/wp-content/uploads/2007/05/set-program-access-defaults-02.jpg

  8B. now check your settings here: IE tools | Internet Options | Programs | Default web browser: If the make default button is NOT dimmed, click/press it. [1]

  9. right click on the following link and SAVE the download to your desktop: http://www.slipstick.com/problems/reg/chromehtml.reg [2]

  9. b double-click the file that you saved in # 9 above & accept invites him to MERGE with the registry data.

  10. open Internet Explorer (only!) to http://support.microsoft.com/kb/923737 [ignore the warnings of DO NOT APPLY and the section will APPLY to] & run the difficulty.

  Note => for best results, check the option Remove personal settings .

  12. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [ignore the title & symptoms].

  12 b. IMPORTANT!-online make disappear/close theTroubleshooting Windows Update tool ""pop up! "   " -then...

  12. ignorant of the "not recommended" or similar warnings, run difficulty he 50202 in DEFAULT modes and AGGRESSIVE. [3]

  13 restart once more.

  [Take a break! Go outside & run your yard to wake you up! [Take a beer, if you want - then...]

  14. assuming that everything is fine, open Internet Explorer (only!) at http://windowsupdate.microsoft.com . Select CUSTOM and scan | See if you manage to install all security updates (for example, KB2698365;) KB2699988) available now; Follow all the instructions.

  -Online if an update of root certificates is listed under the category of updates software optional on the left side of the window of scan results, install it to enjoy greater security of IE8.

  -Online Tip: do NOT install any other updates software optional or any updated material in option .

  15 Reply to this post with a status report and (hopefully) confirm that KB2698365, KB2718523, KB2691442, KB2655992, KB2719985, KB2699988, KB2685939, KB2707511 & KB2718704 are all listed in Add/Remove Programs now.

  Good luck!

  ==================================================
  [1] after that we ended up this thread, do not hesitate to reaffirm Chrome as a default, if you wish.

  [2] trust Source: http://www.slipstick.com/problems/this-operation-has-been-cancelled-due-to-restrictions/

  [3] full Disclosure: running the utility of automated troubleshooting will remove your history of update but not the list of installed updates.

• Windows Update failures should I have start over

  HP G71 laptop

  p/n VM114UA

  WINDOWS 7 64-Bit HP

  Because I couldn't drive recovery Finally, creating (cross posted on original HP displayed error RECOVERY DISK FAILED to CREATE and on the COMMUNITY MICROSOFT) I decided to rebuild using the from HP recovery disk.

  The HP System Recovery discs, which reformatted the drive and reinstalled the operating system and pre-installed software applications. After the system recovery, I used update of the HP Support Assistant to check the bios/driver/application HP updates, then started running updates of Windows to try to get a current. After several reboots, there are 195 Microsoft Updates installed.

  I now have the following Windows Update ISSE:

  Whenever I start the computer these 3 windows updates continue to fail (KB2667402, KB2655992, KB2807986) also failed KB976932

  kb2667402 8024200d error code.

  kb2655992 8024200d error code.

  kb2807986 error 800b0100 code

  and SP1 kb976932 error 800b0100 code

  But Service Pack 1 and the 3 security updates always fail.

  I ran the/scannow spc.exe without any problems be detected/fixed.

  I have downloaded and run the System Update Readiness Tool for Windows 7 X 64

  15 f009wm 8.1 WIN 64 bit
  Office Jet 2540
  P2-1113w WIN 7 64 bit
  G71-340US WIN 7 64 bit
  dv4-1225dx VIsta 64-bit
  zd7000 WIN XP Pro
  xv886 Millennium WIN / WIN XP Pro
  HP deskjet 6980xi
  HP pavilion xt236 / ze4200 WIN XP Media Edition

  Should I try to rebuild with discs of HP recovery again?

  If so, what would you suggest after the recovery discs?

  Update of Windows so that there is no more important updates?

  HP Support Assistant to search for the hardware or software of HP updates?

• FIXED ~ can't access the windows update Web site ~ FIXED

  I'm editing my question details & scored the title to indicate that the problem has been corrected.

  I am sharing my 'dose' for these sho could also have a similar problem with Windows Update.  I do not have a Browser Helper Object enabled, which was to be enabled - "MUWebControlClass".  Of course that was axtivex needed control.  Windows Update now performs normally for me & I was able to successfully download & install my updates - yay!

  My original message follows the stars below...

  ***********

  ... the desktop running windows xp pro sp3 & IE8

  For what it's worth, I go to the Microsoft site & downloaded IE 8 & installed, as my first troubleshooting, before you come on this forum.  Theoretically, I should be as up-to-date as I can be with XP Pro SP3 & IE8, but I wanted to see that everything had been downloaded.  Well, I can't this info now.

  I wanted to see which updates had been installed & when I clicked on the link for Windows Update, said the "Welcome to microsoft update" page, below the message to install the activex control required to view the Web site... fthere is no popup message any that I can right click on to install an activex control.

  I googled similar questions on this forum & tried a similar question MrFixIt & who has not resolved the problem I encounter.

  IE8 is NOT my default browser, or generally leave automatic updates 'ON' unless I'm updating.

  I try to keep my current computer with the Windows updates on a monthly basis, I have to use IE8 for a couple of Web sites.  My current default browser is Dragon of Comodo.

  Your input & feedback & suggestions are appreciated!  Thank you all in advance.

  «Click Start ---> 'run'---> and in the dialog box, type "inetcpl.cpl" without the quotes and click on ' OK'.» Click on the "Security tab"--"custom level button" and scroll down to the box "Download signed activex controls" and select ""prompt(recommended"). Click ok and exit. This should activate the InfoBar at the top of the screen, when you visit windows update to download the activex.

  Good luck.

• Windows Update common problem/fix error/no answer

  recurring problem of windows update does not update its program, which leads to no automatic update works correctly.

  jetroam,
  Take a look at these articles and after return.

  What to post in the Windows Update forum

  Solve Windows Update installation issues

  Troubleshooting Windows Update: offered on several occasions to update

  Last Windows Update Agent

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• There is an error on Windows Update, how to fix?

  Whenever I do the update, he keeps saying, it's as if she never updated in the first place. So, how to solve this problem, I mean it's getting boring because it does not block.

  Thank you

  I'm sorry to say this, but this did not help. However, the problem is solved by removing MSXML4.dll in the System32 folder, which I found it on this article: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/a8f4caad-2b58-42c2-b6a1-17daf910f7ca/

  Thanks if

• Windows Update lists an important update, but I get error when downloading it. "Fix" suggested did not work.

  Windows Update lists an important update, but I get error when downloading it.  I ran update readiness tool and two logs in Windows\logs appear no error at all and nothing fixed.  The update that will not download is KB974332, which can solve some problems I encounter.  What else can be done, or should I ignore this update?
  Just upgraded to Win7 64-bit, Vista 64 - bit Edition Ultimate Home premium.

  Hello

  Welcome to the Microsoft Vista answers Forum!

  We would like to ask you some questions to help us focus on the right place.

  (a) what is the error that you receive on the computer?

  (b) since when you are facing this problem?

  You can try the steps below and check if the problem is resolved.

  Note: this problem may occur if some of the windows update components are corrupt, so we will try to reset the windows update components and look for the number.

  You must follow the link provided below to run the fixit which will automatically fix the problem if you find problems with the fixit, then you can follow the procedure to manually reset Windows component update.

  How to reset the Windows Update components?

  http://support.Microsoft.com/default.aspx/KB/971058

  Also, visit the following link for more reference on the particular update.

  http://support.Microsoft.com/kb/974332

  Hope this information is useful.

  Thank you, and in what concerns:

  Suresh Kumar-Microsoft Support.

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• "Windows update default location of data has changed". " Microsoft Fix - it message. No solution is apparent.

  "Windows update default location of data has changed". " Exactly, what causes this in Windows XP? I does not change the situation. So who, or what, has changed the default location? The Op XP system is still supported, so why is there no solution? And why it still occur? ... Difficult questions, Microsoft?

  PS. What is the default location anyway?

  "Windows update default location of data has changed". " Exactly, what causes this in Windows XP? I does not change the situation. So who, or what, has changed the default location? The Op XP system is still supported, so why is there no solution? And why it still occur? ... Difficult questions, Microsoft?

  PS. What is the default location anyway?

  It is a peer-to-peer forum.  You don't talk to Microsoft.

  A quick search indicates you have probably allowed the system to become infested/infected.

  Here's what I propose - from top to down, don't skip any even if you do 30 minutes as part of an obsession, part of all that you already have.  ;-)

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  Cleaning the components of update on your Windows XP computer

  Given your current number, it's a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you will use the aggressive version if given a choice):
  How to reset the Windows Update components?

  Reset.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 20 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• AUTOMATIC WINDOWS UPDATE SE FARM ON HIS OWN OFF SEVERAL TIMES A DAY I HAVE TO RESET IT - HOW CAN I FIX THIS?

  I have to reset manually the automatic updates several times a day because it turns off

  Suggestions:

  Reset the component windows updated once and for all with Mr. fix it.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Still, Microsoft!