Windows Update problems - reset windows update components - XP SP3

Similar Questions

• Windows Update components

  How can I fix windows update components? I ran the fix it Center and he could not fix the components. I am running Xp home.

  Try following the instructions in the following article.  If it's different than what you've tried before, you can leave the "FixIt" program try to fix it.  If it appears even as you did before, then reject the Fixit program and follow the instructions in the section "Let me fix it myself" (you need to click a link for instructions to appear).  I met several programs FixIt who don't work too well but the fact of the manual process.
  Worth a try.

  "How to reset Windows Update components"
    <>http://support.Microsoft.com/kb/971058 >

  HTH,
  JW

• How can I fix windows update components

  says I need to install windows update components, how can I solve this

  Access the article KB971058 via Internet Explorer (only)

  If no malware is present - How to reset components Windows Updates?

  http://support.Microsoft.com/kb/971058>

  Download and Save the 50202 Fixit of the above page.

  Close all the open programs and browsers prior to running the Fixit.

  Given that the downloads fail, when you run the Fixit choose it is the default mode when you run it the first time.

  When he finished, check if download updates now.

  If the updates are still not download after you run it, then run it again and choose his Aggressive mode.

  Then reboot and see if the download updates now.

  UTC/GMT is 15:44 on Sunday, January 22, 2012

• How the windows update components Lair? and how to configure update components?

  I can't update or install any application from my store of windows8.

  Then I try to fix this after I made the resolution of the problems that they

  will display the result is windows update components must be repaired or

  one or more components are configured incorrectly. What is the solution for

  This problem. How to fix windows component update?. How to he set up?

  Hello

  Thank you for helping me solve my problems on wins 8 apps store. After your replay I check my entire system, installed applications and settings, and then I see a problem with my Norton internet security. And I solved this problem. Now, I have no problem with my app store.

• The Windows Update components fail to install

  This morning I noticed that in the past 2 windows update components were not installed.

  The table below shows the number of the knowledge base for patches and their associated error codes.

  Title	Knowledge Base number	Error code
  Update for 2007 Microsoft Office System	KB977724	80246001
  Update for Windows Defender definition	KB915597	800705 B 4

  Should I worry, and if so, are there ways to get these updates installed?  Have one or two of these updates were replaced by some other updates, and if so, how will I know that I have.  If the initial update fails, is windows update smart enough to try to get the latest updates installed, or require a response.  In other words, can I go back to determine what more recent updates will address these issues?

  ' > http://support.microsoft.com/kb/555375.

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates

  http://support.Microsoft.com/kb/836941/en-us

  How to troubleshoot Windows Defender definition update

  http://support.Microsoft.com/kb/918355/en-us

• Windows Update components should fix

  Ran the fix - it and received the following response. Windows Update components and need to be repaired. One or more components of Windows Update are configured incorrectly. For the record, I can't send same convenience store results (not that I currently feel like it would in any case at the moment). Need help please.

  Try these two things

  The system update tool

  Try a reboot. Before restarting the service (installer of Modules of Windows DisplayName) trustedInstaller to automatic started. Normally it is manual, except if an operation such as windows update requires an installation of starting time.

  Ensures the consistency of the folder WinSxS (Side by Side).

  http://Windows.Microsoft.com/en-AU/Windows7/what-is-the-system-update-readiness-tool

  For 32-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

  For 64-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

  To see the results click on Start - All Programs - Accessories - right click on command prompt and choose run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

  Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

  Then delete this folder to recover the 100 MB.

  del /s "C:\Windows\CheckSur".

   
  You can force a cleanup operation (to remove unnecessary files) by adding or removing a windows feature in the Control Panel - programs and features.

  Compact the Windows databases use various

  You can compact the various databases that Windows uses. This is the Windows Update, Windows Search, Windows Mail, Windows Contacts, Windows, Windows Live and Internet Explorer ver 10 applications calendar.

  Close Windows Mail and Internet Explorer. Wait a minute for Internet Explorer release locks of sound files.

  See how much space taking up type which is below and note the total size (because it scrolls away).

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  dir c:\*.edb c:\*.msmessagestore c:\WebCacheV*.dat/s/a/s

  Then at compact

  SC stop wsearch

  for c:\ /r %A in (*.edb *.msmessagestore WebCacheV*.dat) do esentutl.exe /p "%A" / o

  for c:\ /r %A in (*.edb *.msmessagestore WebCacheV*.dat) do esentutl.exe /d "%A"

  SC start wsearch

  To see the new size and compare it to the old size

  dir c:\*.edb c:\*.msmessagestore c:\ WebCacheV*.dat /a /s

   

  Then to delete some temporary files.

   

   

  del c:\*.integ.raw/s
  .

• I can't reset or refresh my Windows 8. When I try the message appears: THERE WAS A PROBLEM RESET YOUR PC, NO CHANGES have BEEN MADE.

  I bought my PC about year ago. I have windows 8 installed from the beginning. Right after the purchase, I was told by the shop assistant to reset my Windows, so I did as Fallows: parameters - parameters Change PC - general - all remove and reinstall Windows---> who he was. It went ok, no problem, no need to insert additional disks (which I did not at the time of the purchase, by the way - saleswoman told me that recovery of windows, the files are already on the hard drive).  so now after 1 year I am planing to reset or at least update my PC again... but I IMPOSSIBLE. Whenever I try to do the same procedure as described above, I got this message: THERE WAS A PROBLEM RESET YOUR PC, NO CHANGES have BEEN MADE. and that's it!. I have absolutely no idea why. I restore the previous settings of Windows work, with the hope that it will help, but it didn't. Still can not reset my Windows. Anyone have this problem too, or if she had.

  I have attached the picture with this message for a better understanding

  Yes, I bought my PC (Dell) with 8 Windows preinstalled, I was just curious to know if there is a way to extract the product key for the version pre-installed (just in case). Thanks for the support, I will try your method "to create installation for Windows 8 media. But the real question is why I get this message when I try to reset the system "There WAS a PROBLEM of RESET YOUR PC, SUBI NO change".

  See here to prepare a Windows 8.1 with update 1 USB Bootable for installing with a UEFI BIOS from Dell:

  http://dellwindowsreinstallationguide.com/download-Microsoft-Windows-and-Office/Download-Microsoft-Windows/download-Windows-8-1-retail-and-OEM-ISO/

  Make sure that you select the correct edition.

  If your system does not on Windows 8.0 updated the BIOS with the latest version before using the installation media:

  http://dellwindowsreinstallationguide.com/updating-the-BIOS/

  The latest version of the BIOS can have improvements that will help the 8.1 Windows to run more easily.

  As you know Windows 8.0 Windows 8.1, I recommend a new installation of Windows 8.1 opposed to reset:

  http://dellwindowsreinstallationguide.com/a-clean-install-of-Windows/a-clean-install-of-Windows-8-1/Windows-8-1-installation/

  You can follow the optional procedures to wipe the drive before installing Windows 8.1:

  http://dellwindowsreinstallationguide.com/cleaning-up-a-drive-format-vs-secure-wipe-SSD-and-HDD/

  Once you have installed Windows 8.1, install all drivers needed Dell system in good order:

  http://dellwindowsreinstallationguide.com/downloading-drivers-checking-hardware-IDs-and-downloading-and-installing-Dell-system-drivers-in-the-correct-order/driver-installation/

  After that, you can install the latest version of Dell backup and restore:

  http://downloads.Dell.com/FOLDER02909509M/1/Backup-and-Recovery_Application_64M9D_WN32_1.8.1.71_A00.exe

  This will make a new internal recovery Partition which is Windows 8.1 with update 1 and not Windows 8.0. You can then do a backup and Dell recovery media if you wish:

  http://dellwindowsreinstallationguide.com/Dell-backup-and-recovery-1-8-1-71/#RecoveryMedia

• I can't get the update Itunes 10.5 on my PC running windows home edition 2002 SP3

  I can't get the update Itunes 10.5 on my PC running windows home edition 2002 SP3.

  Error there is a problem with this windows package install,.
  a program run as part of the Setup did not finish as expected, contact your provider support or packaging.

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://support.Apple.com/kb/ht1926

  Check if that helps.

• BlackBerry smartphones configure Windows Media Components for Blackberry

  Recently I bought a computer installed with Windows 7 and have used most of the time since my blackberry programs and projects, including the management of the music with Rhapsody, which in recent months has replaced my iPod as my main source of an mp3 player / entertainment device. About 2 weeks ago, I got a message at the startup of Windows 7, indicating that the version of Windows 7 that I had installed on my computer was not genuine copy of the operating system (happened to find the person that I bought the computer had installed a pirated copy of the operating system on the computer) by learning this, I uninstalled Windows 7 and I went back to using Windows XP. After all was said and done I preceded to install Rhapsody without any problems at all and after connecting my Storm to Rhapsody, I received an error message explaining that my windows media components should be attached before I transfer music on the device. After the search for possible solutions solve my issure I got nowhere and this is where you can come to my rescue. My question is how a person will fix everything / fixing windows media on a Blackberry components? Help with my problem will be appreciated.

  OK Nevermind discovered my problem

• Cannot install microsoft updates or get SP3 of XP - error Ox80240036

  Why can't I install updates?  I get error Ox80240036

  Hi ppddjj,

  ·         Did you do changes on the computer before the show?

  ·         (Numbers KB) updates you install?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot State to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click restart to restart the computer.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  You cannot install some programs or updates

• Bootsect.dat file is corrupt, NTLDR is missing/compressed on x 86 pc with Windows XP Home Edition Sp3 and Ie8

  I have a x 86 pc with Windows XP Home Edition SP3 and IE8.

  While preparing for a possible update for Win 7, I thought repartioning and "multiboot" my HARD drive.

  I tried to get WinXP operating as best I can.  I was also check out how to use the Windows Recovery Console to reinstall WinXP and transfer files to a clean reinstall.

  Found while searching "All boot paths" to Start\Run\msconfig\BOOT. INI that one boot path has been highlighted with errors indicating that "file is corrupt because playing a disc error has occurred" and that NTLDR is missing or corrupt.  In fact, it is blurred.  It points to "Recovery Console Microsoft Windows/cmdcon.  I've not used the Recovery Console, ever.

  I have a desktop Gateway 5310 S (detail) and no original XP disc, apparently.

  I have, but never used, a 4ea. set of recovery CD as of 12/05/05 I need to have created after purchase.

  I also had many, odd, problems that come and go, including worth displaying various websites, Yahoo Home Pages and E-mail that keep switch to compatibility mode or outright deletion.  The video and audio on Hulu and video-on-demand online services are always out of sync.  I have problems with editing posts on sites like this even if I can edit my profile fine pages.

  This particular set of problems started recently and very suddenly, from one day to the other.  It was after he worked actually pretty good for a change.

  I don't know how long the boot.ini file has been damaged, I actually discovered by chance.

  I can also not to reinstall some programs such as Family Tree Maker 2005 and 2008, when it was suggested to me by ancestry.com to uninstall/reinstall.

  I have the latest Java and Adobe Flash Player.  I've defragged and disc verified my discs.

  I used CCleaner to delete temp and unwanted files per day.  I ran Hitman Pro, MBAM, MBAR, MSE and SAS several times without detected virus or malware.

  And, as I mentioned above, I have problems with the editor of this site, right now.  Sometimes it just freezes and I have to leave to clear.  Other times it's duplicating entire sentences.  He also flip/flip flops between a Publisher full page and, as now, a half page window of the editor on the half left of the page.

  Suggestions from what people you can come would be greatly appreciated.  This gets really annoying.

  Thank you

  Vernon

  When you check the paths in the boot.ini file, and the recovery console is installed, you will always get an error message indicating that the startup path is not valid.

  If the recovery console is actually corrupted just to uninstall, you can reinstall or burn a cd with the recovery console.

  go here for instructions on deleting the recovery console.

  ===========

  Here's how to make a bootable xp recovery console cd

  Courtesy of JoseIbarra

  You need start by booting in XP using a CD Recovery Console, you can do (no XP media required) and run a chkdsk with error correction command enough times until it is clean and if it does not, you can create a new boot.ini file (this is usually one of two things).

  Here's how:

  Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget what you have (no XP media required).

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  RC. ISO

  Download the ISO from here:

  http://www.thecomputerparamedic.com/?p=8    (courtesy of Daavee)

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient. If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

  ===============

  as for the other problems:

  did you use Registry cleaners?

  These can damage your system

  You seem to be free of infection, it would seem that a part of your process cleaning has removed a necessary file.

  ===============

  Checkdisk with parameter/r should be run. and run it again until there is no error.

  ==========

  you are fully updated and patched to Microsoft updates?

• Try to update XP Pro sp3 and receive 0x8024400A error message

  Trying to update XP Pro sp3 and receive error 0x8024400A service package need to run MSE.  I'll have to do this because my computer has been infected by win32/caphaw.h!

  Original title: urgent update problems!

  Hello

  1 did you change on your computer before this problem?

  2. this problem occurs only with this particular update?

  You can follow the suggestions and check out them.

  Method 1

  You can run a full antivirus scan by using the Microsoft Safety Scanner.

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-AU/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. He also does the disk check, and you may lose the amount of data.

   

  Method 2

  You can follow the procedure in the article.

  Temporary connection related errors may occur when you use Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/836941

  Note: Software antivirus and firewall can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attack.

   

  Method 3

  You can follow the procedure in the article.

  How to troubleshoot an installation fails on Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950718

  Note: Software antivirus and firewall can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attack.

   

  Method 4

  Step 1: Place the computer in a clean boot state. How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  a. click Startand then click run.

  b. type msconfigand click OK.
  The System Configuration utility dialog box appears.

  c. click on the general tab, click Normal Startup - load all device drivers and servicesand then click OK.

  d. When you are prompted, click restart to restart the computer.

   

  Step 2:

  Download and install SP3 manually.

  Windows XP Service Pack 3 network installation Package for IT professionals and developers

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  See also:

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717

  How to obtain the latest Windows XP service pack

  http://support.Microsoft.com/kb/322389

• Error message comes up saying ' there is a problem resetting your PC has not changed. "

  Original title: reinstalling Windows

  My laptop (Dell Inspiron) comes preinstalled with Windows 8, but not working now - it runs very slowly and often takes multiple attempts to turn on. Often said 'Prepare auto repair' when I turn it on, it remains just on this message.

  It's less than 3 years old (out of warranty) so I think that it's a software problem and not material.

  I tried to do a factory reset to clear the laptop, but an error message comes up saying ' there is a problem resetting your PC has not changed. "

  I then tried to create an installation of windows on a USB media using my product key, but impossible to use my product key for retail sales.

  I am now at a loss of what to do that my laptop is pretty useless as it is.

  It's a hard drive to a failing hard drive error / failed.

  It's a DELL error code, not a Microsoft error code

  http://en.community.Dell.com/support-forums/desktop/f/3514/t/19533510

  Replace the hard drive or ask in the Dell Forums.

• I am upgrading an old laptop with Windows XP SP2 to SP3. Where can I download an offline installer that has everything I need to upgrade?

  Setup Windows XP Service Pack 3 offline

  I am upgrading an old laptop with Windows XP SP2 to SP3. Where can I download an offline installer that has everything I need to upgrade?

  -David goods ETF investor

  Where to download the SP3 Setup file:
  (The file is large but only installs the components required by your PC)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5b33b5a8-5e76-401F-BE08-1e1555d4f3d4&displaylang=en

  J W Stuart: http://www.pagestart.com

• Not able to use my MSN browser windows vista upgrade to sp3

  Original title: windows vista upgrade to sp3

  I want to upgrade Windows Vista sp1 to sp3. Kindly ping me as soon as POSSIBLE because I'm not able to use my MSN browser. I have problems of compatibility with IE 7. Waiting for your quick response.

  Hello

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  Then, choose the download of 'bit' OK to use to install the Service Pack.

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  See you soon.