Windows Update components

Similar Questions

• Windows Update problems - reset windows update components - XP SP3

  have 3 computers in the House that was attacked recently.  2 that I have fixed.  It has been difficult.  Registry does not show same problem had 2 other computers. has run the virus scan and it crashes.  Cleaned hard drive. no help. automatic update of windows I tried and received the error 80072eff

  By section 971058.

  Attempt to auto-correct and received the error 80072eff.

  has set manually the registry and consisted of the following who do not register and I'm afraid to go forward with the process without further direction.  pls let me know how to handle this and or if I should proceed to the next steps in the manual registration process.

  Errors

  Mshtml.dll, but charged in DLLRegisterServer was not found;

  c:\windows\system32\wucltux.dll, LoadLibrary failed - specified module could not be found.

  c:\windows\system32\wuwebv.dll, LoadLibrary failed - specified module could not be found.

  all other dll registered very well.

  Next steps not yet made

  Your help and your tips are appreciated.

  You may encounter temporary connection [e.g. 0x80072EFF] errors when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  How to reset the Windows Update components?
  [Skip the section to APPLY to if Win7;] Access KB971058 via Internet Explorer (32-bit) only. Run the difficulty in DEFAULT and AGGRESSIVE modes, then restart]
  http://support.Microsoft.com/kb/971058

• The Windows Update components fail to install

  This morning I noticed that in the past 2 windows update components were not installed.

  The table below shows the number of the knowledge base for patches and their associated error codes.

  Title	Knowledge Base number	Error code
  Update for 2007 Microsoft Office System	KB977724	80246001
  Update for Windows Defender definition	KB915597	800705 B 4

  Should I worry, and if so, are there ways to get these updates installed?  Have one or two of these updates were replaced by some other updates, and if so, how will I know that I have.  If the initial update fails, is windows update smart enough to try to get the latest updates installed, or require a response.  In other words, can I go back to determine what more recent updates will address these issues?

  ' > http://support.microsoft.com/kb/555375.

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates

  http://support.Microsoft.com/kb/836941/en-us

  How to troubleshoot Windows Defender definition update

  http://support.Microsoft.com/kb/918355/en-us

• How can I fix windows update components

  says I need to install windows update components, how can I solve this

  Access the article KB971058 via Internet Explorer (only)

  If no malware is present - How to reset components Windows Updates?

  http://support.Microsoft.com/kb/971058>

  Download and Save the 50202 Fixit of the above page.

  Close all the open programs and browsers prior to running the Fixit.

  Given that the downloads fail, when you run the Fixit choose it is the default mode when you run it the first time.

  When he finished, check if download updates now.

  If the updates are still not download after you run it, then run it again and choose his Aggressive mode.

  Then reboot and see if the download updates now.

  UTC/GMT is 15:44 on Sunday, January 22, 2012

• Windows Update components should fix

  Ran the fix - it and received the following response. Windows Update components and need to be repaired. One or more components of Windows Update are configured incorrectly. For the record, I can't send same convenience store results (not that I currently feel like it would in any case at the moment). Need help please.

  Try these two things

  The system update tool

  Try a reboot. Before restarting the service (installer of Modules of Windows DisplayName) trustedInstaller to automatic started. Normally it is manual, except if an operation such as windows update requires an installation of starting time.

  Ensures the consistency of the folder WinSxS (Side by Side).

  http://Windows.Microsoft.com/en-AU/Windows7/what-is-the-system-update-readiness-tool

  For 32-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

  For 64-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

  To see the results click on Start - All Programs - Accessories - right click on command prompt and choose run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

  Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

  Then delete this folder to recover the 100 MB.

  del /s "C:\Windows\CheckSur".

   
  You can force a cleanup operation (to remove unnecessary files) by adding or removing a windows feature in the Control Panel - programs and features.

  Compact the Windows databases use various

  You can compact the various databases that Windows uses. This is the Windows Update, Windows Search, Windows Mail, Windows Contacts, Windows, Windows Live and Internet Explorer ver 10 applications calendar.

  Close Windows Mail and Internet Explorer. Wait a minute for Internet Explorer release locks of sound files.

  See how much space taking up type which is below and note the total size (because it scrolls away).

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  dir c:\*.edb c:\*.msmessagestore c:\WebCacheV*.dat/s/a/s

  Then at compact

  SC stop wsearch

  for c:\ /r %A in (*.edb *.msmessagestore WebCacheV*.dat) do esentutl.exe /p "%A" / o

  for c:\ /r %A in (*.edb *.msmessagestore WebCacheV*.dat) do esentutl.exe /d "%A"

  SC start wsearch

  To see the new size and compare it to the old size

  dir c:\*.edb c:\*.msmessagestore c:\ WebCacheV*.dat /a /s

   

  Then to delete some temporary files.

   

   

  del c:\*.integ.raw/s
  .

• How the windows update components Lair? and how to configure update components?

  I can't update or install any application from my store of windows8.

  Then I try to fix this after I made the resolution of the problems that they

  will display the result is windows update components must be repaired or

  one or more components are configured incorrectly. What is the solution for

  This problem. How to fix windows component update?. How to he set up?

  Hello

  Thank you for helping me solve my problems on wins 8 apps store. After your replay I check my entire system, installed applications and settings, and then I see a problem with my Norton internet security. And I solved this problem. Now, I have no problem with my app store.

• Error: The Windows Update components must be repaired. One or more components of Windows Update are configured incorrectly

  Original title: Windows Ypdate default data locations have changed. By MS Fix - it = need to change the locations of update of widows to the default settings of Windows. How do I do that?

  All the Windows security updates fail since late May. Used MS Fix Center, issued found = "components Windows Update must be repaired. One or more components of Windows Update are configured incorrectly. "Need to"places of Windows Update change to the default settings of Windows. How can I do?

  1 McAfee Total Protection, 27/02/2013 expiration date. No other anti-spyware or firewall, only MS Windows firewall.

  2. any other Norton or McAfee has never been installed.

  3 McAfee is installed in the PC.

  4. no
  4B. no
  4 c. [all except KB2718704]
  4 d all found.
  4th. KB2393802 12/02/12 and Ko 971029 3/17 / 12.

  5. ask to Google Chrome

  6 Java is U.5 V.7.

  7. do not use Registry cleaners.

  8. never install repair or cleaning set

  Fact: McAfee (and Norton) applications are notorious for not not upgrade (or uninstalling) itself. Evidence for many years of McAfee "leftovers" is the troublemaker more likely here.

  Roll up your sleeves & cross your fingers...

  ACTIONS

  [You will see that there is quite a bit to do this, you may want to print these instructions for reference offline. Perform ALL steps below in a 1 meeting - allow a minimum of 1 hour.  Don't skip the steps!  [Note: If a step said to restart, restart! ]

  1. click right on the following link to download the McAfee Consumer products Removal tool, select SAVE as... & download the utility on your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your key of handy product, uninstall McAfee Total Protection via Start | Control Panel | Programs: Programs and features.

  4 IMPORTANT! -Online make sure that the Windows Firewall is activated immediately after the reboot!  (Should be done automatically, but I want you to check.)

  NB: Now you're "working without a net": do not to ANYTHING else online (e.g., navigation reading E-mail; cat) until you have finished step #7 below!

  5. double-click on the file that you saved in #1 above to run the utility. DO TAP not your keyboard until the race ends, then restart.

  (6 do a clean install of McAfee Total Protection (using your product ID, if need be) & restart). If you purchased the software directly from McAfee, go to https://home.mcafee.com/Secure/Protected/Login.aspx to connect and download your software.

  Note: McAfee Total Security includes a firewall, Windows Firewall should be disabled now (that is, you shouldn't have too much active).

  7. on several occasions the McAfee application manually update until you get a "not more than updated" or similar prompt.

  8A. Start | Settings | Control Panel | Add/Remove programs. Set Program Access and Defaults: select (check) the CUSTOM [<>] configuration option, and then click the arrows pointing to the far-right | Browser: select "Internet Explorer" here (to not "use my current... »).

  Illustration: http://teamtutorials.com/wp-content/uploads/2007/05/set-program-access-defaults-02.jpg

  8B. now check your settings here: IE tools | Internet Options | Programs | Default web browser: If the make default button is NOT dimmed, click/press it. [1]

  9. right click on the following link and SAVE the download to your desktop: http://www.slipstick.com/problems/reg/chromehtml.reg [2]

  9. b double-click the file that you saved in # 9 above & accept invites him to MERGE with the registry data.

  10. open Internet Explorer (only!) to http://support.microsoft.com/kb/923737 [ignore the warnings of DO NOT APPLY and the section will APPLY to] & run the difficulty.

  Note => for best results, check the option Remove personal settings .

  12. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [ignore the title & symptoms].

  12 b. IMPORTANT!-online make disappear/close theTroubleshooting Windows Update tool ""pop up! "   " -then...

  12. ignorant of the "not recommended" or similar warnings, run difficulty he 50202 in DEFAULT modes and AGGRESSIVE. [3]

  13 restart once more.

  [Take a break! Go outside & run your yard to wake you up! [Take a beer, if you want - then...]

  14. assuming that everything is fine, open Internet Explorer (only!) at http://windowsupdate.microsoft.com . Select CUSTOM and scan | See if you manage to install all security updates (for example, KB2698365;) KB2699988) available now; Follow all the instructions.

  -Online if an update of root certificates is listed under the category of updates software optional on the left side of the window of scan results, install it to enjoy greater security of IE8.

  -Online Tip: do NOT install any other updates software optional or any updated material in option .

  15 Reply to this post with a status report and (hopefully) confirm that KB2698365, KB2718523, KB2691442, KB2655992, KB2719985, KB2699988, KB2685939, KB2707511 & KB2718704 are all listed in Add/Remove Programs now.

  Good luck!

  ==================================================
  [1] after that we ended up this thread, do not hesitate to reaffirm Chrome as a default, if you wish.

  [2] trust Source: http://www.slipstick.com/problems/this-operation-has-been-cancelled-due-to-restrictions/

  [3] full Disclosure: running the utility of automated troubleshooting will remove your history of update but not the list of installed updates.

• A fix with one click for Windows Update problems - how to reset the Windows Update components?

  I can't check, download or install updates through Windows Update.  Help!

  Microsoft has released a new "Fix it" solution that should automatically solve your problems with Windows Update.  Just click on the button below and follow the instructions.

  
  Solve this problem

  For more details on this solution, read the article here.

• Components Windows Update are configured incorrectly

  original title: repair Windows Update componet

  Unable to get the Windows Update. One or more components of Windows Update are configured incorrestly. What can I do to fix this?

  See if this article helps you:

  "How to reset the Windows Update components?"
    <>http://support.Microsoft.com/kb/971058 >

  HTH,
  JW

• Components of Windows Update needs to be repaired. How can I do this?

  That's what said Fix--It just discovered no Windows Update in a long time. And now Office Word does not just stop down. Thank you for a solution.
  How can I repair components?

  Can you please post what edition of Windows , this happens in what Service Pack level and is on?

  Information you provide will help someone to provide you with a relevant solution.

  How to ask a question
  http://support.Microsoft.com/kb/555375 >

  You can reset windows update components by referring to article:

  How to reset the Windows Update components? http://support.Microsoft.com/kb/971058/en-us>

  Download and save the fix it 50202 from the page above.

  Reset

  Close all open programs and browsers before you run the fix it.

  Remove all excess icons (each of them, essentially) of the taskbar (lower-right)

  As downloads fail, when you run the patch, choose it is the default mode when you run it the first time.

  When he finished, check if download updates now.

  If updates are still not download after running it, then run it again and choose it's aggressive mode.

  Then reboot and see if the download updates now.

  UTC/GMT is 17:38 on Friday 16 December 2011

• one or more components of windows update are configured incorrectly

  whenever I have try and install the im says yhat updates updates have been sussfull, but when the computer restarts, I get this message: one or more Windows Update components are not correctly configured and converted back!

  Hello

  1. the problem occurs with all updates you are trying to install?

  2. you remember any changes made to the computer before the show?

  I suggest you components reset Windows Update and check if the problem persists.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Important:

  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

• p6310f: Windows Update problem

  When you try to upgrade to windows 10 I received the error message 0 x 80080005 - 0 x 90016 after watching in Microsoft support forum, I found that the problem was related to windows 7 is not not to date. I checked and found that my computer has stopped udating a couple of years. I tried to run Fixit MS that has not worked. Tried to reboot (BITS) and got ERROR 126 (module not found) I then followed the instructions at https://support.microsoft.com/en-us/kb/2700567 on how to reset the Windows Update components. During the process, I have the following errors:

  Mshtml.DLL loaded, but the dllregisterserver entry point was not found.

  Shdocvw.dll "" ""

  browseui.dll   "                "                    "                     "

  MSXML.dll Module could not load make sure that binary is stored at the specified location the specified module could not be found.

  Actprxy.dll Failed is not found

  gpkcsp.dll        "        "           "             "

  initpki.dll          "           "                 "

  wuaueng1.dll"" "

  c:\windows\system32\dllcache\wucltui.dll"" "

  wuweb.dll      "            "           "              "

  muweb.dll    "            "              "            "

  I guess my question is what I have to do a restore of the system under windows 7, before I can upgrade to windows 10? Or y at - it another way?

  Hello glockrow ;
  
  Let me welcome you on the HP forums!
  
  I read your post about windows update problems and wanted to help.
  
  I would that be able to say that updating to Win10 was an exact science where we know exactly how he does it, and what it should - but the flooding of this and other instances of Win10 problem after that problem indicates that, at best, we are all guessing.

  So, I think, from what I've read and done on my PC, is that you SHOULD be able to avoid the problem of missing updates by updating using Win10 created using this MS link media: 10 Windows Installer using the media - Windows help authoring tool

  After you create the DVD or USB, NOT boot from it. Instead, insert it into your PC and, if it does not auto-start, right click on the file setup.exe and run it.

  HOWEVER - and this is important - PC Win7 have a rate low success updated Win10 without problem - primariluy lack of OEM Win10 drivers.  Typical problems include display artifacts (to cause to be obliged to use the driver for the card of Microsoft Basic), not wireless and touchpad problems.  The drivers Microsoft provides have only the most basic features, with none of the extras that the HP drivers bring to the stage.

  It is further complicated by the function Win10 GoBack, whereby you can return to your original operating system, being known to be unreliable. So when your upgrade machine malfunctioning, only then you discover that you cannot return the machine to work, that you had originally!

  You can protect yourself against ending up with a damaged machine - seriously considering using a free third-party product that works for airport Imaging/restoration - Macrium Reflect.
  
  Macrium reflect (MR) provides a FREE version that can be used to image and restore partitions or drives together.
  
  What I recommend is the following:
  (1) download and install Macrium reflect (MR)
  (2) run M. and choose the option: "Create an image of the partition (s) required to backup and restore Windows" to write a full backup to an external drive or USB key
  (3) use the option to create a CD or a USB startup key
  
  NOW, you have the means to restore a full system that works for the external hard drive or USB key in a few minutes.
  
  So now you can recharge before with the upgrade, knowing that whatever happens, you will be able to return to your currently works in a few minutes.
  
  Good luck

  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Windows Update code, error 8007007E

  I get a warning on my computer tells me that Windows cannot check the updates automatically. So I run windows update and it says that an error has occurred during the new updates for my computer. Then he said: code 8007007E windows has encountered an unknown error and.  Apparently because I bought my computer in February it has never been updated. I know this is a problem and I don't want my computer at risk. Help, please. I tried the troubleshooting, and it gives no help. I'm going crazy trying to figure it out.  I only am not computer savvy enough to keep the simple answers please :)

  Right-click on my computer and select properties: Windows version which is displayed on the general tab that results (for example, Windows Vista Ultimate Service Pack 2;) Windows 7 Ultimate 64-bit)?

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  How to reset the Windows Update components?
  [Skip the section to APPLY to; run the difficulty in default and aggressive mode]
  http://support.Microsoft.com/kb/971058

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I get the 8024000E error message when windows update tried check _ updates

  What should I do to correct this.  I've never had this problem before.

  Hi lori1010,

  Welcome to the Microsoft Windows Forum!
   
  What is the update that you tried to check? Updates usually begin by KBXXXXXX.
   
  Temporarily disable security software, updates and then try to install

  Run fixit to reset windows update components and restart the computer

  Here is a link to reset the Windows components: http://support.microsoft.com/default.aspx/kb/971058

  If the problem persists,
  
  You can scan System File Checker (SFC)
   
  To run the System File Checker tool, follow these steps:

  1) click Start and type cmd in the box start the search.

  (2) right click on cmd in the list programs, and then click Run as administrator.
   
  (3) If you are prompted for an administrator password or a confirmation, type your password or click on continue

  (4) at the command prompt, the following line, and then press ENTER:
  sfc/scannow
   
   
  Hope helped with this information
   
   
  Thank you, and in what concerns:
  Aziz Nadeem - Microsoft technical support.
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Windows Update does not properly

  I am running windows 7 on a hp Q8300 quad core desktop computer processor.  Windows Update (do not remember the official name) has worked well up until now.  2 days ago it downloaded updates and and asked to close at the end of a session, as it is often done without any problem.

  Now when you start again it says something like "processing and installation of updates 0% complete, do not turn off your computer.  It was 0%.  Finally, it will start in any case, but updates are not yet installed.

  Thanks in advance for your help.

  Download and save the Fixit on this page - How to reset the Windows Update components?
  Once the download is complete, close all open programs and browsers.
  Now Configure the system to boot .
  NOTE: If a 3rd party firewall was previously used, open Windows Firewall in Control Panel to make sure that the native Windows 7 firewall is now on.
  In the clean boot state, all the firewalls of 3rd party will be disabled. Using the Fixit the system must be connected to the internet.

  Now run MicrosoftFixit50202.msi and choose the default mode. Reboot the system to the same State of clean boot and see if he can find, detect and download updates now. If it is possible, then Cancel the Clean boot steps and restart in normal Windows mode.

  In normal Windows mode, can the system installs updates now?

  If this isn't the case, configure the system to boot once more and run the Fixit by using aggressive mode. Restart when it's done and follow the steps above to see if the system can update now.

  MowGreen Services update - consumer safety