Windows Update does not work. Stuck at "checking latest updates... »
I use the Windows Update site to check the updates manually. But he is stuck at "checking for updates
for your computer... "and not going is not beyond this point. Its been done these last days. I'm on Windows XP SP3.
How to reset the Windows Update settings?
http://support.Microsoft.com/kb/971058
Tags: Windows
Similar Questions
-
Windows 10 does not work on my PC, and Windows 7 would not be updated
I downloaded the Windows 10 Upgrade Wizard for free. However, whenever I run it, the error message appears saying "Windows 10 does not work on this PC", because "the display is not compatible with Windows 10. Check with the manufacturer for support.
So, I contact the manufacturer of the display. Verified support Office my PC online and found the optional Windows updates 10 have not been installed. I tried to run the update, but the update of Windows crashes to download updates. I also ran a convenience store, but the resolution of the problems also got stuck.
I would start by reinstalling the video driver
Completely, remove the current (or software) driver and install the latest driver available. For instructions on how to do read everything to update the drivers of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here -
Update of Windows XP does not work. I tried the correction of the error 0 x 80245003 and nothing has changed. Fix, that it won't work because SP 3 is not installed, because of the Windows Update does not. I try to install SP 3 manually, then downloader windows will not install reference SP 2 must be installed. SP 2 is installed. So I tried several ways to solve this problem, and I keep running into roadblocks of Windows. Help, please.
Hi my NameJoel,
See the methods mentioned below and check if that helps.Method 1:How to troubleshoot an installation fails on Windows XP Service Pack 3Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.Note: A firewall is software or hardware that checks information coming from the Internet or a network. Then the firewalleither blocks information or allows information to pass to your computer. If the information is blocked or throughdepends spent on your firewall settings. A firewall can prevent malicious software (such as worms) to access your computer through a network or the Internet. A firewall can also help stop your computer from malware sent to other computers. Windows XP, Windows XP Service Pack 2 (SP2) and Windows XP Service Pack 3 (SP3) include firewall software.See also:You cannot install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after installing Windows XP SP3 immediately after a clean installation of Windows XP SP2 or
http://support.Microsoft.com/kb/943144Steps to take before you install Windows XP Service Pack 3Note: Disable your antivirus software is not usually recommended, some software antivirus prevents certain system changing files. This can cause the Windows XP SP3 installation failure. To make sure that you manage to install Windows XP SP3, temporarily disable your antivirus software, including any third-party antispyware and firewall program. To do this, right-click on the icon for your antivirus program, and then click on disable. The antivirus program icon typically appears in the bottom right corner of the computer screen.Important: Make sure that you enable the antivirus software after you install Windows XP SP3.Hope this information helps. -
I installed the latest update required for my iphone ios 6 a few days ago, and now when I try to download pictures from my iphone to my PC (via USB connection), the PC does not see the iphone. iTunes sees it yet, but windows Explorer does not work. It seems that some setting has been broken through the update of ios. A way to solve this problem?
Restart the computer and the iPhone. Unlock the iPhone before connecting it to the computer. Any change?
TT2
-
I can't get my updates. the Windows Installer does not work how to fix it
I can't get my updates. and I can not install other programs. the Windows Installer does not work. How can I fix?
http://support.Microsoft.com/kb/2438651#reso1
See the above article, I suggest you use not Fixit, but it's your choice.
For manually fixit it you follow the steps in the resolution.
fyip
-
Error updating Windows 10: does not work if the PC is joined to the domain
My company requires that employees upgrade to Windows 10 before the deadline. When I went to install Windows 10 came an error message that says "Windows 10 does not work on this PC" and then told the user account: this PC is connected to a domain. Contact your system administrator
Does anyone have an idea how to get around this problem? At least 2 other people in our office have successfully upgraded to Windows 10 without feeling it, and another co-worker gets the same error message.
This is a screenshot of what happens:
Your best option is to download the ISO and upgrade to a Local account.
Step 1: How to download official Windows 10 ISO files
Step 2: how: upgrade from previous versions of Windows using the file ISO for Windows 10
-
Original title: itunes won't uninstall on my XP Professional version 2002.
iTunes won't uninstall on my XP Professional version 2002. I tried to delete all files from apple and it will let me delete the Apple software update. I get an error MOUSSOKI that says that Windows Setup does not work. What should I do?
Hello
Run the tool fixit in the following article and check:
-
Windows Installer does not work with Vista Home Premium 32-bit system.
My computer did not an automatic update in over 6 months. I discovered this when I could not install my tax preparation software. the error message is gone "windows installer does not work, a file may be damaged, contact support windows technique.»
SFC
Check the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type
sfc/scannow
For the results of the SFCCheck the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Typefindstr/c: "[SR] cannot" %windir%\logs\cbs\cbs.log|more "
The system update tool
Ensures the consistency of the folder WinSxS (Side by Side).
http://Windows.Microsoft.com/en-AU/Windows7/what-is-the-system-update-readiness-tool
For 32-bit Windows
http://www.Microsoft.com/en-US/Download/details.aspx?ID=504
For 64-bit Windows
http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540
To see the results click on Start - All Programs - Accessories - right click on command prompt and choose run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).
Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log
Reregister Windows install
Desktop shortcuts are shortcuts to the Windows Installer which then starts the Office program.
Click Start - all programs - Accessories - right click on command prompt and choose run as administrator. Type
regsvr32 c:\Windows\System32\msi.dll
regsvr32 c:\Windows\System32\msihnd.dll
regsvr32 c:\Windows\System32\msimtf.dll
regsvr32 c:\Windows\System32\msisip.dll
c:\Windows\System32\Msiexec.exe/regThat you re-register Windows Installer.
-
My application get Windows 10 does not work HELP Please
1 - my get app Windows 10 does not work. Whenever I try to run your PC compatibility check it says:
The report is not available now, you can always book your upgrade when it's time to start the upgrade we will run another report to make sure that your PC works with Windows 10
2. when I click on view Confirmation it Says:
YOUR UPGRADE IS RESERVED
There is nothing you need to do now, you will receive a notification on your PC when windows 10 is ready to install.
and it been like this for 4 weeks and nothing happened what should I do to check if the applications on windows 7 runs on windows 10 or not and start the upgrade to windows 10
Please help thanks
Download the media creation tool
Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.
Note: How to check if you are downloaded or installed the update Windows 10 November
How to create an ISO or USB drive.
Select upgrade this PC now and then click Next
or
Task of pre-required
When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1
- How to back up and restore your files manually
- How to free up disk space in Windows
- How to: 10 tips before installing Windows 10
- How to: determine if a device application or hardware is compatible with Windows 10
- Will remain the documents and applications, or install app must
then
- How to download official Windows 10 ISO files
- How to: upgrade previous versions of Windows using the file ISO for Windows 10
then
- Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
- Reboot several times, and then try again.
- Disable the general USB peripherals (for example - smart card reader).
- If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
- Perform a clean boot, restart, and then try again.
- If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
- If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
- If this does not work, try using the. ISO file to upgrade if possible.
- If you are connected to a domain, go to a local account.
- If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
-
Get "key to upgrade is for the edition of windows that does not work with Windows Anytime Upgrade"
The PC is running Windows 7 Starter. I'm trying to upgrade to Windows 7 Professional. I bought the card from Windows Anytime Upgrade Key.
When I entered the PK, error, "put key in level is for the edition of windows that does not work with Windows Anytime Upgrade"
Windows 7 Anytime Upgrade fails:
If your getting the following: error: Windows Anytime Upgrade failed
This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
See: http://support.microsoft.com/kb/2660811= Other reasons and possible corrections.
Windows Anytime Upgrade fails with the error:
"every time that the upgrade has failed. Go online to solve the problem.
http://support.Microsoft.com/kb/2658652If Anytime Upgrade still does not work:
Shut down and restart your computer.
Make sure that the Windows updates have been installed.
Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821
If Anytime Upgrade still does not work, turn off the user account control:
1. go in user accounts in Control Panel
2 change user account control settings
3. pull the slider to the level as low as possible
4. restart the PC
5. pass by the "Anytime Upgrade" as usual
Try the following:
1 disable any security software before attempting to upgrade
2. make sure that your computer is updated (devices and applications)
3. disconnect all external devices before installing.
4. check your hard disk for errors:
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: chkdsk /f /r
When you restart your system, your computer will be scanned for errors and will try to correct them.
1. click on start, type msconfig in the search box and press ENTER.
User account control permission
If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
2. in the general tab, click Selective startup.
3. under Selective startup, clear the check box load startup items.
4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
5. click on OK.
6. When you are prompted, click on restart.
7. after the computer starts, check if the problem is resolved.
Also run the Windows 7 Upgrade Advisor:
http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx
Who should I contact if I have problems installing and / or activation of my product key card?
Please contact to the: www.windows7.com/getkeysupport.
If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:
Learn how to install Windows 7 Service Pack 1 (SP1)
http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgradeAdditional resources:
-
Tried using Windows Anytime Upgrade. Bought at Staples have product key is entered correctly. "Following instructions, accepted USA get error message says ' the upgrade key you have entered is for an edition of windows that does not work with Windows Anytime Upgrade. Enter a different upgrade key. »
Which edition of Windows 7 is installed on the machine?
Which edition of Windows 7 you are trying to do an Express upgrade to?
Please note that the Express upgrade does not support OEM, MSDN-Academic, Volume (the student faculty licenses) license. If you are in possession of all these brackets, you will need to save and do a custom clean install. If you want to do it, please backup your Windows 7 Home Premium or according to edition currently installed. Some licenses for Windows distributed to tertiary level students are not perpetual, which means that you cannot continue to use the software after a course or graduating.
---------------------
Windows 7 Anytime Upgrade fails:
If your getting the following: error: Windows Anytime Upgrade failed
This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
See: http://support.microsoft.com/kb/2660811= Other reasons and possible corrections.
Windows Anytime Upgrade fails with the error:
"every time that the upgrade has failed. Go online to solve the problem.
http://support.Microsoft.com/kb/2658652If Anytime Upgrade still does not work:
Shut down and restart your computer.
Make sure that the Windows updates have been installed.
Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821
If Anytime Upgrade still does not work, turn off the user account control:
1. go in user accounts in Control Panel
2 change user account control settings
3. pull the slider to the level as low as possible
4. restart the PC
5. pass by the "Anytime Upgrade" as usual
Try the following:
1 disable any security software before attempting to upgrade
2. make sure that your computer is updated (devices and applications)
3. disconnect all external devices before installing.
4. check your hard disk for errors:
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: chkdsk /f /r
When you restart your system, your computer will be scanned for errors and will try to correct them.
1. click on start, type msconfig in the search box and press ENTER.
User account control permission
If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
2. in the general tab, click Selective startup.
3. under Selective startup, clear the check box load startup items.
4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
5. click on OK.
6. When you are prompted, click on restart.
7. after the computer starts, check if the problem is resolved.
Also run the Windows 7 Upgrade Advisor:
http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx
Who should I contact if I have problems installing and / or activation of my product key card?
Please contact to the: www.windows7.com/getkeysupport.
If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:
Learn how to install Windows 7 Service Pack 1 (SP1)
http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade -
I have Windows 7 Home Premium and bought a Windows Anytime Upgrade to Windows 7 Ultimate. After extraction in the online store, I got a download link and product key.
However, when I try to run the Express upgrade and enter the key that I got from the online store, the operation fails and the window says:
"The upgrade key that you entered is for an edition of Windows that does not work with Windows Anytime Upgrade. Enter a different upgrade key. »What should I do?Windows 7 Anytime Upgrade fails:
If your getting the following: error: Windows Anytime Upgrade failed
This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
See: http://support.microsoft.com/kb/2660811= Other reasons and possible corrections.
Windows Anytime Upgrade fails with the error:
"every time that the upgrade has failed. Go online to solve the problem.
http://support.Microsoft.com/kb/2658652If Anytime Upgrade still does not work:
Shut down and restart your computer.
Make sure that the Windows updates have been installed.
Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821
If Anytime Upgrade still does not work, turn off the user account control:
1. go in user accounts in Control Panel
2 change user account control settings
3. pull the slider to the level as low as possible
4. restart the PC
5. pass by the "Anytime Upgrade" as usual
Try the following:
1 disable any security software before attempting to upgrade
2. make sure that your computer is updated (devices and applications)
3. disconnect all external devices before installing.
4. check your hard disk for errors:
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: chkdsk /f /r
When you restart your system, your computer will be scanned for errors and will try to correct them.
1. click on start, type msconfig in the search box and press ENTER.
User account control permission
If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
2. in the general tab, click Selective startup.
3. under Selective startup, clear the check box load startup items.
4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
5. click on OK.
6. When you are prompted, click on restart.
7. after the computer starts, check if the problem is resolved.
Also run the Windows 7 Upgrade Advisor:
http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx
Who should I contact if I have problems installing and / or activation of my product key card?
Please contact to the: www.windows7.com/getkeysupport.
If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:
Learn how to install Windows 7 Service Pack 1 (SP1)
http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade -
Windows Defender does not work
Windows Defender support & apparently installs without error. Yet it will not work. Is it all the portions of Windows XP if you know something let me know * address email is removed from the privacy *.
Hello
1. What do you mean exactly by "Windows Defender does not work"?
2. do you get any error message related to Windows Defender?We recommend that you check if Windows Defender service running. To do this, try the following steps:
a. Click Start, click Run, type services.msc and click ok.
b. right click on the Windows Defender service and click Start.
c. restart the computer and check the difference.For more information, see Troubleshooting Windows Defender
Visit our Microsoft answers feedback Forum and let us know what you think.
-
I am unable to run Windows Search. No matter how I open it, it says "Windows Search does not work."
What is Windows Desktop Search 4.0 that you have installed with your updates.
If it is uninstall it from Add / Remove programs.
The update is KB940157
If it does not show then show updates is on top, use the method below.
Click Start , type cmd.
Now in the result of the research with right-click on cmd.exe and select run as administrator if you are not the administrator.
Type regsvr32 /u "%programfiles%\Windows Desktop Search" and press enterYou search old back, see if it works.
The next time you do the Search 4.0 updates appears again.
You can try it again if you wish.
-
My windows sidebar does not work.
Original title: ask the community
Hello, my windows sidebar does not work, and when I ran it say my sidebar is managed by the administrator of my system and I don't have any administrators on my computer to change the settings, I would change my sidebar to reaper again my computer doesn't not part of a network
Try this FixIt associated Vista Sidebar
OR -
Installation of Windows service does not work after Explorer 9 uninstallation and reinstallation of 8. I followed several suggestions on this forum, but still no luck. I ran the SFC system twice, who told me he had corrupted files. "Some have been repaired and some might not be." I then went in the event viewer after a start to the top and he stated that the 'Adobe APM service' is not found. Also the "hpqddsvc' and the 'gupdate' is not found. He tries to install something every time I start, but he abandoned. I checked whether the system is on and disabled. It's on. There are a lot of small problems, but my main concern is the Adobe program. I tried uninstalling and reinstalling Adobe, but still get an error message that the Windows Installer Service could not be accessed. Other suggestions?
Hello
I suggest you follow the link and check.
How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer
Maybe you are looking for
-
Tried to install new software on my Mac and will not complete and partially seized computer.
See above - hesitate to try the Setup again and lose the use of the computer.
-
OLE1. CreateEmbed Bit_str, "Paint.Picture" works under Dos but does more when gave birth off the coast. How can I fix teachix? Using VB5 to obtain a bitmap for embeded in an Access database. This used to work perfectly, but gives an Error 31032 whe
-
Why one of my flash drives open even immediately after loading KB971029?
I have two different flash drives, we the attached, 1 GB, immediately open unless I have hold down SHIFT key for more than 5 seconds, and then I opened my computer. The other is a SanCruzer, 40 GB, and it opens correctly never until I go to my comput
-
Remember - this is a public forum so never post private information such as numbers of mail or telephone! I want to create a password backup disk. When I get to "insert disc" my laptop will not recognize the DVD player to allow me to continue. I ha
-
"Authentication failed" when you try to deploy to the device app
Out of the blue in the middle of the day yesterady, I can't deploy all the apps on my Z30. The message (tried both Momentics and command line deploy blackberry) simply says "failure of the authentication of the user. Note that this is different from