Windows Update problems - you must run Microsoft Internet Explorer 5 or later

Similar Questions

• "The product key you entered will not work with this edition of windows vista. You must run the windows vista Setup program or enter a windows vista product key. »

  I bought a laptop HP three years ago in Dubai, now I am in India, my family problem does not activate windows vista and also use it now, I try to use but asked the system to activate product key not found the product key at the bottom of my laptop I enter the product key but the system says "the product key you entered will not work with this edition of windows vista.»  You must run the windows vista Setup program or enter a windows vista product key. "In my company sticker a HP laptop, it says" Windows Vista Home Premium, also found in computer ownership 'Windows Vista Ultimate' and as low property said: you must activate today and return their product ID: 89580-014-0000025-71152, but in my laptop near the product key, wrote a different number which is "89580-014-0000025." what is the problem and how to solve that advice me please. ""

  Hello

  You can use this Recovery Partition to reinstall Vista to his new condition with the right edition of Vista.

  This recovery partition was photographed on your hard drive by HP during the manufacturing of the factory.

  You press F11 on startup to start the process of recovering back to factory settings.

  Here is the information about HP.

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&DLC=en&cc=us&product=18703

  If the recovery partition is damaged, you can buy HP's Vista recovery discs for a small fee.

  If HP's Vista recovery disks, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon

• The product key you entered will not work with this edition of Windows Vista. You must run the Windows Vista Setup program or enter a Windows Vista business product key

  Product key bad for the wrong version?

  Hello

  Recently the computer in business inherited from a friend, very fast and very good. Regardless of the operating system no - geniue, is with Vista Business, while the thumbnail of authentication is Vista Ultimate. I took a screenshot of what it says when I put Vista Ultimate product key: (it does not appear if you are unable to use it: P)

  http://S13.PostImage.org/57nfn5pqv/vistareg.jpg

  He said: "the product key you entered will not work with this edition of Windows Vista. You must run the Windows Vista Setup program or enter a Windows Vista Business product key."

  How would the installation of Windows Vista? My files would still be there when you need him? My drivers would still exist? No matter what to get deleted or become unusable? He would return to SP1? Any response is welcome.

  You can order form of the manufacturer's recovery media.

  The reason why the system as non-authentique shows currently is using a license in Volume KMS - these licenses must be re-activated at least every 6 months by connecting to the KMS user license activation server.

  It will require a reformat and reinstall whatever you do, unless you can connect to the KMS - Volume media server cannot be upgraded under normal conditions.

• Error - Internet Explorer has encountered a problem and must close in Internet Explorer & jump - rises in Windows Explorer.

  Original title: Windows/Internet Explorer / Data Execution Prevention.

  I constantly receive pop-ups Windows and/or Internet Explorer has encountered a problem and needs to close. Windows Explorer in particular sometimes will do every few seconds.  I also sometimes have a debugger of Dr. Watson popup that blocks everything on my computer.

  I also get a pop-up Windows Data Execution Prevention indicating that Windows has closed this program to help protect my computer.

  My icons on the desktop this process will sometimes disappear.  I am able to restore in the Manager of tasks by clicking on the following:

  "C:\Documents and Settings\Administrator\Menu Démarrer\Programmes\Accessoires\Explorateur Explorer.lnk"

  I can't go online most of the time.  Sometimes I'm able to sneak in a "back door" by clicking on a link in an email, but time is limited (from five minutes to five hours) until I started offshore.

  Please notify.

  This root killer Webroot suggested?

  Are you going to provide the other requested information (requested) on your system and if not, why not?

  Did you run the scans listed in my previous post and if not, why not?  I am reluctant to work on weird problems with XP if MBAM and SAS have not been executed.

  So far, I never saw a Microsoft Support Engineer in these forums effectively resolve an error DEP in the 'right' way.  Sometimes, they have some things to try (how that works for you?), but you don't need methods to try, you will need to do things that solve your problem.

  I doubt that you have a memory problem or disk - which is not what causes the DEP errors.

  If you have made any exceptions DEP in XP to try and get your working papers, you must cancel all DEP exceptions to go forward.

  If I've ever seen Windows Explorer crashing and DEP errors, here's what I've done to understand what is happening:

  When the Windows Explorer (not Internet Explorer) is wrong (especially when right click), begin to suspect third-party add-ons explore extension.

  Those who would be the Explorer extensions that do not belong to Microsoft.  This means that extensions that you have added.  Solution Explorer extensions are generally well and installation of certain applications will install extensions from Explorer solutions for you, give you a choice and sometimes they can be added without your knowledge when you
  install new software.

  Solution Explorer extensions are sometimes added as a new right-click option, you see on folders and files (like the scan of this file, open that file, play this song).

  If there is something in particular that you do during exploration that you know will be the cause of the problem, which will help focus on the problem and the help that you suddenly know, when you have found and corrected.  If you can get there when you want it, make an adjustment and then there is no message the next time you don't do anything, you do, you have found and corrected.

  First of all you need a way to see what modules explore you have installed now and a way to turn them off (not uninstall them) so you can understand that we are at the origin of the problem.  You can have a lot of extensions not installed Microsoft don't even know you about.

  Download ShellExView here to see what Explorer extensions you have loaded:

  http://www.NirSoft.NET/utils/shexview.html

  ShellExView does not install anything on your computer, simply of runs and displays.

  After launching ShellExView, under Options, choose "Mark non-Microsoft Extensions" and extensions not Microsoft will be pink, clear, but on some systems which is a difficult color to see, so click on display, choose the columns and move the column Microsoft closer to the top, so you can see on your screen without having to scroll left and right.

  Click on the column header for "Microsoft" sort display (by clicking on the column of Microsoft) if all non-Microsoft extensions (all the 'Our') are on top and easy to see.

  Non-Microsoft extensions would be things you have added (non-Microsoft) and are what you should be suspect.

  You can also Google the name of a suspect add-on and see if there is any success on the mistakes of the DEP and what other people have done about it.
  You can Google something like:

  Explorer XP crashing (you must fill in the name of add your suspect on).

  See what kind of search results hits you get and are looking for solutions or situations that sound like yours.

  I'm not a defender of trial and error, but I can't think of another way to do...

  Right click and disable the non Microsoft extensions one at a time (or maybe in groups of 3-5), keep a list, so you can enable them again later if you wish. The result of the change is immediate and no reboot is necessary.  Test your failure condition.  If the Explorer starts to behave, you will know that an extension of this group of 3-5 is the culprit in order to start to enable them one by one until the Explorer fails again.

  If you recognize all the extensions that have been added or recently downloaded, start with these first.

  Disabling the extension does not uninstall the extension - it is just disabled.

  Disable them one at a time until your right click on do not generate an error, then restart and test again.  You have disabled the last extension would be suspicious.

  You can also just disable all non-Microsoft extensions, restart and allow them one at a time until you find the one that generates the condition.

  If you have a large number of extensions, you can disable them is small groups, 3-5 at a time instead of 1 at a time until your system starts to behave.  When it does not, you will know that the problem is one of the extensions of this small group and you can enable members of the Group at a time until the problem returns, then the problem is with the last extension that you enabled.

  The hope is that you will find an extension that caused the error, and then you can figure out what on this subject - either uninstall it or see if you can get an update of the author of the extension of their web page.

  I have not your problem, but I can when you toggle extensions, the extension is immediately disabled, so disable an extension does not seem to require a restart, but if you think that you have found the problem, I reboot and repeat the test in any case to be sure the problem disappeared.

  If you post your non-Microsoft extensions list, maybe someone will recognize it as a potential problem.

  If you find the offending extension that's the problem, please let us know what it is that I can add to my list.

  If complains in Internet Explorer, run Internet Explorer with no Add-ons and see if you still have the problem.

  If Internet Explorer then runs OK with no Add-ons, you can determine what add-on is the cause of the problem.

  Fortunately, Windows has a built in option to run Internet Explorer with no Add - ons (imagine that).

  To start Internet Explorer with no add-on, click on start, programs, System Tools, then choose:

  Internet Explorer (No Add-ons)

  If you can't find that, click Start, run and enter in the box (or copy/beyond the next line):

  "C:\Program may Explorer\iexplore.exe"-extoff

  Click OK to start IE with no Add - ons.

  IE will launch with a message reminding you that it runs with no Add - ons and ask you to click on the button Home (do) and then you can visit the web pages where you might think that you will get a DEP error.  Pages may be different, but you want to see if you still get the DEP error message or not.  You can then activate the Add-ons one at a time until find you the one that is causing problems.

• After upgrading Office 2003 to Office 2010, when rebooting, open a window of choce of windows update, if you select do not do updates, wauclt.exe runs and the pigs, cold start pc is required

  After upgrading Office 2003 to Office 2010, when rebooting, open a window of choce of windows update, if you select do not do updates, wauclt.exe runs and the pigs, cold start pc is required to restart or allow time (about an hour) for wuauclt stop execution and free PC - our aim here is to bundle 2010 via ZEN na enter the beam perfectly - this popup must be eliminated

  Hi Pops1148,

  ·         Is the question not confined with updated Microsoft Office?

  Follow the suggestions below for a possible solution:

  Method 1: You can follow the steps in the article in the Microsoft Knowledge Base and check if it works.

   

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  http://support.Microsoft.com/kb/910339

  Method 2: Try the SFC (System File Checker) scan on the computer.

  To run the System File Checker tool, follow these steps:

  a. click Startand type cmd in the box start the search .

  b. right click on cmd in the list programs, and then click run as administrator.

  c. If you are prompted for an administrator password or a confirmation, type your password or click on continue

  d. at the command prompt, the following line and press ENTER:

  sfc/scannow

  Reference:

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

   

  File system (CFS) Checker

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  Method 3: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

   

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: While hard disk analysis if bad sectors are found when scanning try to repair this area, all available on which data can be lost.

  Let us know if that helps.

• You can run Microsoft Security Essentials along the coast with Verizon internet suite? Or will they be in conflict?

  You can run Microsoft Security Essentials along the coast with Verizon internet suite? Or will they come into conflict.

  Hello

  You should be able to use the free version of Prevx with Verizon and Firefox.
  You may need to stop the function of safe online but you can try it. If it is
  are problems collate Prevx, Verizon and the Support of FireFox.

  Verizon Internet Security is just McAfee re-packaged.

• A new appreas to window with "firefox.exe has encountered a problem, you must close...". "'Send report' 'do not send report '.

  While browsing with firefox Mozila, sometimes in a minute or 2/3 a new window appears "Firefox.exe has encluntered a problem, you must close...» "' Don't send lAs line"Send report""do not send report", tap on" close firefox window.

  Troubleshooting extensions and themes

  • https://support.Mozilla.com/en-us/KB/troubleshooting%20extensions%20and%20themes

  Check and tell if its working.

• 0x800A0046 0 x 80248011 0x80072EE7 0x8024402C 0x8024502D 0x800A01AD site Web Microsoft Windows Update or connect to the Microsoft Update Web site

  • 0x800A0046 0 x 80248011 0x80072EE7 0x8024402C 0x8024502D 0x800A01AD? Regds, 'a journey of a thousand miles begins with a first step."

  Resolution for the error Code:

  0 x 80248011, 0x80072EE7, 0x8024402C, 0x8024502D, 0x800A0046, 0x800A01AD

   

  When you try to connect to the Microsoft website Windows Update or connect to the Microsoft Update Web site, you may receive one of the following error codes:

  • 0x800A0046
  • 0 x 80248011
  • 0x80072EE7
  • 0x8024402C
  • 0x8024502d
  • 0x800A01AD

  CAUSE The 0x800A0046 error code may occur if one of the following conditions is true:...

  • The 0x800A0046 error code may occur if one of the following conditions is true:
    • The logon user account belongs to the guests or limited account groups.
    • The security descriptor does not have authenticated users run Windows Update or Microsoft Update.
    • The impersonate a client after authentication policy is missing the account administrator and Service in the list of users and groups.
  • Error code 0 x 80248011 may occur when there is a problem with the database that stores Windows Update or Microsoft Update information on your computer.
  • The 0x80072EE7 error code may occur if the client computer cannot find the correct IP address when it tries to resolve a URL for the Windows Update Web site or the Microsoft Update Web site. This error can occur if the Hosts file contains a static IP address.
  • The 0x8024402C or 0x8024502D error codes typically occur because there is an incorrect character in substitution of proxy settings.
  • The 0x800A01AD error code may occur if the c:\windows\system32\wuaueng.dll file is missing or is not registered correctly.

   

  RESOLUTION

  0x800A0046 error code to resolve this error, use one of the following methods: me...

  0x800A0046 error code

  To resolve this error, use one of the following methods:

  Method 1: Remove the user account that is experiencing difficulties for customers or account groups

  1. Click Start and run, type control admintools, and then click OK.
  2. Click on computer management.
  3. Expand local users and groups.
  4. Select users.
  5. Open the account used to access Windows Update or Microsoft Update.
  6. Click on the Member tab of.
  7. Select the user account you want to remove, and then click on remove.

  Method 2: Set the security descriptor

  1. Click Start, run, type cmd, and then click OK.
  2. Type sc tisb wuauserv D: (A; CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL unit), and then press ENTER.

     You will receive a message of 'Success'

     Note the Sc.exe tool is not available in a default Windows 2000 installation. The Sc.exe tool is from the Microsoft Windows 2000 Server Resource Kit.

  3. Type Exit to close the command prompt.
  4. Try Windows Update or Microsoft Update again.

  Method 3: Add the Local Administrator and accounts Service him impersonate a client after authentication

  1. Click Start, click Run, type secpol.msc and press ENTER.
  2. Expand local policies.
  3. Click user rights assignment.
  4. Double-click to open the impersonate a client after authentication
  5. On the local security settings tab, click on add a user or group, and then add the administrator and the Service to the list of users and groups.
  6. Click OK and restart the computer.

  Method 4: Configure the remote procedure call (RPC) service to log on under a Local System account

  1. Click Start and run, type services.msc, and then click OK.
  2. Find and right-click the remote procedure call (RPC) service and then click Properties.
  3. On the connection tab, click Local System account, click on apply and then click OK.
   

  error code 0 x 80248011 before solve you this problem, clear the Microsoft Internet Explorer cache. To do this, follow these steps:

  1. In the Internet Explorer Tools menu, click Internet Options.
  2. On the general tab, click on delete files in the temporary Internet files section.
  3. Click OK, and then click OK again.

  To resolve this error, recreate the database that stores Windows Update or Microsoft Update information on your computer. To do this, follow these steps:

  1. Click Start, click Run type cmd in the Open box, and then click OK.
  2. At the command prompt, type the following command and press ENTER: net stop wuauserv
  3. At the command prompt, type the following command and press ENTER: cd /d c:\Windows\SoftwareDistribution

     Where c:\Windows is the folder where Windows is installed.

  4. At the command prompt, type the following command with the quotation marks and press ENTER: rd /S /Q DataStore
  5. At the command prompt, type the following command and press ENTER: net start wuauserv.
  6. Close the command prompt window.
   

  0x80072EE7 error code to resolve this error, examine the Hosts file. (This file can also be hosts. Sam.) Make sure that the file lists all the entries IP static for the Windows Update Web site or the Microsoft Update Web site.

  The Hosts file is located in the C:\Windows\system32\drivers\etc folder. To view the Hosts file, you may need to associate the file with Notepad. To do this, follow these steps:

  1. Right-click the Hosts file.
  2. Click Open with, and then select Notepad from the list of programs.

  If the Hosts file contains a static IP address that is associated with Windows Update or Microsoft Update, comment the entry by adding the sign # at the beginning of the entry. You can also delete the whole line and save the changes to the Hosts file.

  Note programs, such as Web accelerators, accelerators DNS, utilities of caching DNS and Spyblockers, can add static IP entries for the Windows Update Web site or the Microsoft Update Web site to your Hosts file. This scenario can cause Windows Update or Microsoft Update to fail.

   

  error codes 0x8024402C or 0x8024502d to resolve these errors, remove the characters from the list of exceptions to the proxy, and then clear the proxy cache. To do this, follow these steps:

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.
  3. Click the Connections tab, click LAN settings, and then advance.
  4. Delete any entry in the Exceptions section.
  5. Exit Internet Explorer.
  6. Click Start, run, type cmd, and then click OK.
  7. Type the following commands. Press ENTER after each command.
     • proxycfg d
     • net stop wuauserv
     • net start wuauserv

  0x800A01AD error code to resolve this error, use one of the following methods. Method 1: Register the MSXML program files to register the MSXML files, follow these steps.

  Note You may not have installed the files listed in steps 3 and 5 on your computer. If you don't have one of these files, when you try to save the file, you will receive an error message similar to the following error message:

  LoadLibrary (".dll") has failed - the specified file name could not be found.

  You can ignore this error message and continue to the next step.

  1. Click Start, click Run, type regsvr32 Msxml.dll in the Open box, and then click OK.
  2. When you receive the following message appears, click OK:
     DllRegisterServer in Msxml.dll successful.
  3. Click Start, click Run, type regsvr32 Msxml2.dll in the Open box, and then click OK.
  4. When you receive the following message appears, click OK:
     DllRegisterServer in Msxml2.dll successful.
  5. Click Start, click Run, type regsvr32 Msxml3.dll in the Open box, and then click OK.
  6. When you receive the following message appears, click OK:
     DllRegisterServer in Msxml3.dll successful.

  Method 2: Save the file c:\windows\system32\wuaueng.dll to save the c:\windows\system32\wuaueng.dll file, follow these steps:

  1. Click Start, click Run, type regsvr32 c:\windows\system32\wuaueng.dll and then click OK.
  2. When you receive the following message appears, click OK:
     DllRegisterServer in successful c:\windows\system32\wuaueng.dll.

  Kind regards
  Sohail Patel

  Regds, 'a journey of a thousand miles begins with a first step."

• p6310f: Windows Update problem

  When you try to upgrade to windows 10 I received the error message 0 x 80080005 - 0 x 90016 after watching in Microsoft support forum, I found that the problem was related to windows 7 is not not to date. I checked and found that my computer has stopped udating a couple of years. I tried to run Fixit MS that has not worked. Tried to reboot (BITS) and got ERROR 126 (module not found) I then followed the instructions at https://support.microsoft.com/en-us/kb/2700567 on how to reset the Windows Update components. During the process, I have the following errors:

  Mshtml.DLL loaded, but the dllregisterserver entry point was not found.

  Shdocvw.dll "" ""

  browseui.dll   "                "                    "                     "

  MSXML.dll Module could not load make sure that binary is stored at the specified location the specified module could not be found.

  Actprxy.dll Failed is not found

  gpkcsp.dll        "        "           "             "

  initpki.dll          "           "                 "

  wuaueng1.dll"" "

  c:\windows\system32\dllcache\wucltui.dll"" "

  wuweb.dll      "            "           "              "

  muweb.dll    "            "              "            "

  I guess my question is what I have to do a restore of the system under windows 7, before I can upgrade to windows 10? Or y at - it another way?

  Hello glockrow ;
  
  Let me welcome you on the HP forums!
  
  I read your post about windows update problems and wanted to help.
  
  I would that be able to say that updating to Win10 was an exact science where we know exactly how he does it, and what it should - but the flooding of this and other instances of Win10 problem after that problem indicates that, at best, we are all guessing.

  So, I think, from what I've read and done on my PC, is that you SHOULD be able to avoid the problem of missing updates by updating using Win10 created using this MS link media: 10 Windows Installer using the media - Windows help authoring tool

  After you create the DVD or USB, NOT boot from it. Instead, insert it into your PC and, if it does not auto-start, right click on the file setup.exe and run it.

  HOWEVER - and this is important - PC Win7 have a rate low success updated Win10 without problem - primariluy lack of OEM Win10 drivers.  Typical problems include display artifacts (to cause to be obliged to use the driver for the card of Microsoft Basic), not wireless and touchpad problems.  The drivers Microsoft provides have only the most basic features, with none of the extras that the HP drivers bring to the stage.

  It is further complicated by the function Win10 GoBack, whereby you can return to your original operating system, being known to be unreliable. So when your upgrade machine malfunctioning, only then you discover that you cannot return the machine to work, that you had originally!

  You can protect yourself against ending up with a damaged machine - seriously considering using a free third-party product that works for airport Imaging/restoration - Macrium Reflect.
  
  Macrium reflect (MR) provides a FREE version that can be used to image and restore partitions or drives together.
  
  What I recommend is the following:
  (1) download and install Macrium reflect (MR)
  (2) run M. and choose the option: "Create an image of the partition (s) required to backup and restore Windows" to write a full backup to an external drive or USB key
  (3) use the option to create a CD or a USB startup key
  
  NOW, you have the means to restore a full system that works for the external hard drive or USB key in a few minutes.
  
  So now you can recharge before with the upgrade, knowing that whatever happens, you will be able to return to your currently works in a few minutes.
  
  Good luck

  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Recent Windows Update problem, 80070005 error code

  My computer is running windows update without problems so far. For the last week or two, my computer tried to install the following updates:

  Update security for Windows Vista (KB969947)
  Update security for Windows Vista (KB973565)
  Update for Windows Mail Junk e-mail filter [November 2009] (KB905866)

  After each attempt, the updates fail with the error code 80070005. After that my computer keeps on reminding me to install important updates, that I am unable to do.

  I tried:
  1. disable the Antivirus software and Windows Defender firewall. Perform the reboot and installation manual
  2 disable the update of windows, rename the software distribution folder, enable windows update, restart
  3. I followed the procedure described by Savan-H described here
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/29d7f9d1-56cd-42f3-bd44-7de8448ef70e/
  I arrived in #5 to step 3 and after you run the code given in the cmd prompt, I get this error
     
  WARNING: Unable to set SeSecurityPrivilege privilege. This privilege may be required.
  OpenSCManager error: access denied

  WARNING: /sddl = da; CCLCSWRPWPDTLOCRRC; SY)(a;; ccdclcswrpwpdtlocrsdrcwdwo;;) BA)(a;;) CCLCSWLOCRRC; to the)(a;; cclcswrpwpdtlocrrc;; unité centrale): no previous object open

  All these attempts were dead ends and I still cannot update my pc. It continues with 80070005 error. I would appreciate any help on this matter.

  Kind regards
  Atom

  Hello

  It is a very difficult to solve.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Description of the system update for Windows Vista, for Windows Server 2008 analytical tool, for
  Windows Server 2008 R2 Release Candidate for Windows 7 Release candidate
  http://support.Microsoft.com/kb/947821

  Those are kind of prerequisites and probably will not solve the problem.

  Products of security/antivirus/antispyware are a known cause, so you can turn them off like
  as the test (and that sometimes not really totally removes their influence).

  How to restore the security settings the default settings?
  http://support.Microsoft.com/kb/313222

  Error message when you use Microsoft Update or Windows Update Web sites to install updates on
  Windows 2000, Windows XP and Windows Server 2003: 0 x 80070005
  http://support.Microsoft.com/kb/968003/

  Its usually a permissions problem:

  Please check this link and those that he sites.

  Work your way through my 3 posts here.
  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/200f5140-c2dd-48a5-8CDB-0d8c82ade3cf

  -----------------------------------------------------

  You can also try a manual installation:

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Windows Update problem. "Windows didn't start the Windows Update service on Local computer." Error 1067: the process ended unexpectedly. »

  I have a problem with windows update. When I try to start the windows update service, I get this, "Windows could not start the Windows Update service on Local computer. Error 1067: The process ended unexpectedly. I also see this in the event viewer.

  Log name: Application

  Source: Application error

  Date: 21/07/2012 10:40:20

  Event ID: 1005

  Task category: (100)

  Level: error

  Keywords: Classic

  Description:

  Windows cannot access the C:\Windows\System32\wuaueng.dll file for one of the following reasons: there is a problem with the network connection, the file is stored on the disc or the storage drivers installed on this computer. or the drive is missing.  Windows has closed the program host process for Windows Services because of this error.

  Program: For the Windows service host process

  File: C:\Windows\System32\wuaueng.dll

  Tried regsvr32 c:\windows\system32\wuaueng.dll and got "the"C:\windows\system32\wuaueng.dll"module has been loaded but the call to DllRegisterServer failed with error code 0x80004005.

   

  SOLVED!

  Hello

  Follow these methods.

  Method 1: Try to re - register the file c:\windows\system32\wuaueng.dll

  To save the c:\windows\system32\wuaueng.dll file, follow these steps:

  a. click Start, type run.

  b. now, tin the window run, type regsvr32 c:\windows\system32\wuaueng.dll and then click OK.

  c. When you receive the following message appears, click OK:

  DllRegisterServer in successful c:\windows\system32\wuaueng.dll.

   

   Method 2: If this does not help, you can reset Windows update components and check.
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

• KB2676562 error 80070490 Windows update problem

  original title: Windows Update problem

  I'm unable to install the "Security Update for Windows Vista (KB2676562)."  I get the error "80070490."   I tried everything, including the "fix for Windows (KB947821)" and "Automatic troubleshooting" that incorrectly shows that the problem has been corrected.

  I'm unable to install the "Security Update for Windows Vista (KB2676562)."  I get the error "80070490."   I tried everything, including the "fix for Windows (KB947821)" and "Automatic troubleshooting" that incorrectly shows that the problem has been corrected.

  Have you tried everything in this article: http://support.microsoft.com/kb/958044

  Method 1: run (Checksur.exe) system update readiness tool

  If this method does not resolve the problem, go to method 2.

  Method 2: perform a Windows repair installation

• Windows Update problem. Same proposed update again and again.

  UPDATES OF WINDOWS PROBLEMS

  WHY MICROSOFT ME ASKING TO UPDATE THE UPDATE EVEN OVER AND OVER AGAIN?

  IT IS HARD FOR THE LAST TWO DAYS.  IS THEIR A WORKAROUND, I WOULD LIKE TO KNOW.

  Hello

  Please do not type in capital letters because it's difficult to read and considered to be shouting.

  ---------------------------------------------------------------------------------------------------------------

  You can right-click on any update and hide it in Control Panel - Windows Update.

  Then run this:

  How to reset the Windows Update components? (Has a Fixit.)
  http://support.Microsoft.com/kb/971058

  Description of the system update for Windows Vista, for Windows Server 2008 analytical tool, for
  Windows 7 and for Windows Server 2008 R2
  http://support.Microsoft.com/kb/947821

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Windows Update problem - 0 * 80070005

  * Original title: windows update problem

  I'm not get windows updates.so I run the program update troubleshooter.in windows he showed the error of update problem as... windows 0 * 80070005 (2016_05_17_T_06_03_42P) .and this problem was not fixed. and again, I have no answer answer.pl.

  First of all

  KB3138612 would be the last for a manual installation

  The first would actually KB3145739

  Homepage for all versions,

  https://TechNet.Microsoft.com/library/security/MS16-039

  After that you manually install you KB3153199

  I would also like to before doing this,

  Be sure and go to uninstall a program and see which Microsoft Net framework you have installed.

  4.5.2 is more consistent to have installed,

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=42642

• Vista - Windows Update Service is not running

  My Windows Update does not update and when I try to run it the answer is that the service is not running.  But when I do a reboot it does not change and I still can't update.  Help!

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058 Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.