Windows update website

Similar Questions

• Windows update website does not work

  Hello...

  I recently had a problem requiring a reinstall instead of XP Pro 32-bit to backrev to SP2. Basically I have been running SP3, but was constantly reminders, insistence, etc to update to IE8, and after continuous pressure, I finally said 'ok' and went ahead with it. And he threw quickly across into itself.

  Accordingly, I did an uninstall of IE8, but concluded that IE7 could no longer work. After checking for a solution and try the patches recommended, nothing has worked, and since I'm at SP3, IE7 could not be uninstalled (this is possible for SP2). There is no information available for SP3 uninstall, so I had finally "repair" XP by doing a reinstall instead of booting from the XP SP2 cd. It worked pretty well, and everything was back to normal, even if I was now running IE6.

  So, I had the ACR IE7 on your site and tried to install it. There is no problem during installation - no message of error - but after the reboot. I was unable to open IE7 anyway. ERGO, I had no choice but to uninstall it. Thank gawd I rarely use IE; nothing else was touched and Firefox & Acoo both work very well.

  To try to resolve the problem of IE7, some "corrections" for "IE7 will not run" involve open IE7 and perform certain tasks. Seems to be quite a task: IE7 will not run, so go ahead and open and... Riiight. Anyway, I don't have the tools of correction for reset and disable add-ons, but unfortunately, they specify that I must first install SP3. No way will reinstall SP3 until I see IE7 work @ SP2; Simply much too, it would mean an extra effort to do a re-install of SP2.

  I'm ready to install other patches, although I noticed that nothing has been downloaded after I backrevved to SP2. As a result, I went to windowsupdate.microsoft.com do updates manually. He installed the required ActiveX control, analysis, and then returns the following message is displayed:

  "The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

  For self-help options:

  • Frequently asked Questions
  • Find Solutions
  • Windows Update Newsgroup

  To support options:

  • Microsoft online assisted support (no cost for Windows Update issues) "

  So I am now running SP2 and everything seems fine, except that I can't apply updates, nor can I run IE7.

  Virus Info: this machine is running Microsoft Security Essentials and AVG Antivirus, and both are up to date and returned "no items found" after a FULL analysis. I also did a manual FULL scan using Malwarebytes Anti-Malware (also updated to current rev & GIS files) and it is an executable placed under my login in Documents & Settings of DiVX, that triggers an application running ads when I open the DiVX player. He was NOT in the Windows directory. AVG and MSE up-to-date and run full scans every night, so if you believe it is a virus, I would need proof. You would also be admitting that MSE is wrong; I've been running for more than a year.

  Caution: again, I won't install SP3 & IE8 until I see that IE7 will run correctly @ SP2, which - at least in part, it will apply updates that I can't apply. Please spare me the answer "well, updated to SP3 and IE8 first, and we'll see if that fixes it. If you're wrong, I'll be right where I started and will have to go through the process again to get where I am now, lose a lot of time in the process. I don't know if it is a community site, but please, only a response from someone who can provide real help for the problem of why the update site simply says there is a problem, but does not provide any additional information about the error.

  Yes, I know that XP will support discontinued from April 2013. It is now Sept 2012.

  Thanks in advance for any help legitimate that you can offer.

  Support for XP SP2 took end July 2010 - http://support.microsoft.com/gp/lifean31

  The Windows update website no longer unless you are at SP3. I did a new install of SP2 and verfied. The mistake that almost everyone gets in these conditions is 0x8024400A. I think that if you look at the WU error page again you will see this code.

  You say that you will not install SP3 so we cannot help. You are committed to a comprehensive system of faults for the life of the PC. If you change your opinion then we do know and I/we will try to help.

  BTW XP died in April 2014 not 2013 - http://www.microsoft.com/en-us/windows/endofsupport.aspx

  Tricky

• Windows update on dell 1521 laptop with vista home premium SP1

  Cannot download any modification, with the exception of windows defender updates. download progress meter shows 0% all the time and it cannot install updates. last updates have been made is 12/08. I have auto update turned off and I do it manually updates. I get an Error 8007000 b, but nothing on your microsoft site helps me with this error message. I use this SUITE for anti-virus, spam, spyware protection and there a fire wall which I tried to turn it off, but it does not matter still can not download updates. Please help, I am running out of options to try. I also checked on installed updates and nothing in this list on computer is required/recommended updates on windows update, when I do the search.

  Hi tdigiannurio,

  Thanks for posting your questions to answers.microsoft.com

  Here is some information that should help you with this error.

  If you receive the 8007000 b error when you try to install Windows Vista updates, the Windows file system transaction log is damaged. The transaction log is used by the Windows file system to recover when a file error occurs. To correct this error of update, you clear the log. Here's how:

  To clear the file system transaction log

  1. Click the Start button. In the Search box, type command prompt, and then, in the list of results, right-click command promptand then click run as administrator. 2. In the command prompt window, type fsutil resource setautoreset true C:\. (This assumes that C: is the drive on which Windows Vista is installed. If Windows is installed on another drive, change the drive accordingly letter.) 3. Restart your computer. 4. Download and install the update again.

  If the problem persists after you follow the steps above, go to the Center of Support Windows Update website to try to find more information about the error code or to request support by e mail.

  Let us know if it helps to address the known issue or if additional assistance is needed.

  Kind regards

  Debbie
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The website has encountered a problem and cannot display the page while you try to run Windows update and get error code 0 x 80240036

  I can't update, repeat me the website has encountered a problem and cannot display the page. I need to update to Windows XP Service Pack 3. The error code is 0 x 80240036

  Original title: does not refresh

  Hello

  1 did you changes to the computer before the show?

  2. who is the antivirus installed on the computer program?

  Method 1:

  I suggest you run the FIXIT from the link below and.

  The problem with Microsoft Windows Update is not working:

  http://support.Microsoft.com/mats/windows_update/

  Method 2:

  Perform the steps described in the article:

  You receive an error message "Windows Update has encountered an error and cannot display the requested page" when you try to install an update

  http://support.Microsoft.com/kb/883614

  Method 3:

  If the problem is not resolved, I suggest you try the procedure described in the link mentioned below.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  322756 (http://support.microsoft.com/kb/322756/( )

  I hope this helps.

• Update Windows "the website has encountered a problem and cannot display the page you are trying to display."

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

  For self-help

  For self-help options:

  • Frequently asked Questions
  • Find Solutions
  • Windows Update Newsgroup

  To support options:

  • Microsoft online assisted support (no cost for Windows Update issues)

  They gave me before several links to follow:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  These links could not download exe making known. is not a valid win32 application. Everything I tried to download gives me the same MSG (not a valid win 32 application). Can someone please!

  Hello

  Were there any changes made to the computer before the show?

  Please follow the methods.

  Method 1:

  Follow the steps in the link.

  You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003

  http://support.Microsoft.com/kb/2497281

  Method 2:

  Get the error: not a valid Win 32-bit application can have several origins:

  I have listed some of them below.

  (a) the file is corrupt, missing, or bad.

  (b) file is not designed for your version of Windows:

  (c) file is a virus, worm or other malicious program file.

  I suggest you to use Internet Explorer with no. Add and verify.

  a. click the Start button.

  b. click on all programs.

  c. click on Accessories.

  d. click System Tools and then click on Internet Explorer (No Add-ons).

• Error manually running Windows updates "the website has encountered a problem and cannot display the page you are trying to view. The options provided below might help you solve the problem.

  Original title - manual update of Windows XP via "Windows Update" fails

  07/01/14: click on "Windows Update" on the desktop (XP Home) and XP Tablet

  Result: 'the site has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. »

  This office has begun on about 3 days ago and just this morning appeared on the Tablet

  I do McAfee and Microsoft updates manually every morning after the startup of computers so that they will not automatically be updated when I'm busy with other things

  I suspect that the McAfee via Verizon security package is the culprit since the 'look' of their package and procedures changed end of December

  Since then, they have had updates almost every day

  And around the same time, my problem appeared on XP Home Edition, I was not able to access Adobe PDF files and had to re-download Adobe Reader XI

  Any body else having the same problem?

  And help get the update of Windows XP to run again?

  It would not be the first step to disable automatic updates in Control Panel and manually download and install the most recent cumulative security update for internet explorer since without first, everything in the way of troubleshooting will be futile?

  Download and install the latest cumulative security for IE8 update and manually restart the computer.

  visit windows update via the shortened link in your Start menu.

  Assuming that you have Win XP SP3 and IE8, it will be the necessary file

  http://download.Microsoft.com/download/1/9/A/19A6AC47-9EA0-455F-B918-A44D25B5304C/IE8-WindowsXP-KB2898785-x86-enu.exe

• Windows Update, not loading, getting the error "the website has encountered a problem and cannot display the page you are trying to display."

  I just did a fresh install of win xp and impossible to get the update of windows to work. I get this message: the site has encountered a problem and cannot display the page you are trying to view.

  You must be at Service Pack 3 level before you can use Windows updates.

  To determine which service pack is currently installed on your computer, follow these steps:

  1. Click Startand then click run.
  2. Copy and paste, or type the following command, and then click OK:

  winver

  A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  Installation of SP2 - http://support.microsoft.com/gp/xpsp2getinstall

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

  See also: http://support.microsoft.com/kb/2497281
  You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003

• "The website has encountered a problem and cannot display the page you are trying to see." error when I try to run windows update

  I am re - install XP on an SSD. The installation went well, but when I try to run windows update, I get the following error message: "the site has encountered a problem and cannot display the page you are trying to view. I reformatted the drive and re-installed windows many links - no luck, I get the same error message. Old disk HARD charge with the SME XP install updates to drive very well. Help please!

  See if the article sheds some light for this problem: http://support.microsoft.com/kb/836941

• my Media Player does not work (Vista) in a website after my last windows update.

  I have a virus scanner, checked my computer by running sfc/scannow and everything was fine until I do now.  The media player works when I open the program and just run or burn a CD.  I can also listen to live radio on my computer but nothing of a Bank of audio that uses the media player.
  

  Hello

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  _______________________________________________________________________________

  and change how to get updates for you to choose what you install to stop it happening again

  You may need to install one at a time to find the problem, we

  and make sure that you do not use Windows Update to install the drivers of 3rd material part

  Find them directly in the hardware manufacturer

  and when you see the problem update right click on it - UAC prompt - then hide it

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

• Windows updates impossible to check/download - error code: 80070005

  Hello

  my top of the laptop (Satellite Pro) has not downloaded or installed updates since January and it has not worked very well lately.
  When I click on "try again" on the Windows Update page, I just get the same error again and again.

  Website of help Windows says that it would be a problem with my computer as it came with Vista Home Basic already installed on it.

  Any help would be greatly appreicated!

  Hello!

  The search in the Microsoft Knowledge Base takes only a few minutes and so I founded this article:
  http://support.Microsoft.com/kb/883825/

  It s not the same error that you have, but to resolve the problem, you must disable the antivirus and perhaps also the firewall.
  Check it!

  Good bye

• Extremely slow/unnecessary Windows Update after system recovery.

  Hello

  While trying to help a friend with her laptop, I encountered a small problem, which seems quite unique. After searching the ' net and the Knowledge Base, I'm about as clued in as when I started, that is to say not very.

  Machine: Satellite 1800 412 (Danish).

  DID: Restore the system to zero back to XP SP1a (NSP).

  Problem: After a complete system via the original recovery CD restore, Windows Update is running * extremely * slowly, or not at all, once it gets to the point where it scans for updates you need. So far, I've managed to get 1 downloaded an update, a little. As an update is attempted usage of the processor reaches a maximum at 100% and stay there until I abandon and hard restarts, since the machine is now almost useless and lazy point appear frozen.

  Tried to: applied manually different updates downloaded directly from Microsoft, such as Internet Explorer 6 sp1, XP SP2 (DK), various updates and patches for XP downloaded and checked/tried to reinstall the drivers of Toshiba (they are updated). Verify that the systems boots properly with all recognized devices. Check the system clock. Searched the Toshiba KB, searched the Internet, searched the Toshiba support forum. Pulls hair in desperation. I have to have restored the system 4times intant to try different ways of patching the system with updates.

  Special features: It is apparently * only * updated Windows, what causes this problem, and that after the first few, where he updates the Windows Update engine in Internet Explorer. Before that I'm trying to update the machine apparently functioning normally. I can surf, download, install and run programs and what not. (No, I did not visit suspicious websites.) If Windows Update runs automatically in the background / 'in the status bar', the same thing is happening: Machine suddenly becomes useless and stays that way.

  The machine is on a local network behind one bulletproof OpenBSD firewall, no other Windows machines inside, so there is no chance of a quick infection of the network at the origin of the problem.

  Unfortunately: Manually download and apply the patches aren't an option I want to activate the automatic updates before you return the machine back to its owner.

  Hope some of you might have an answer to this one, because I have never known or heard of something similar before.

  Frank.

  Hello

  There may be a possible for your problem. An attempt is an Installation from CD XP Win and New Installation of the tool of Toshiba s. check that the activity of process is that s OK, made a driver update and an update of the Bios on the side download Toshiba. http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  I hope this is a help to your problem.

  By

• HP OfficeJet Pro 8610: Windows Update error 80070490

  I received a Windows Update error 80070490 compared to the HP printer.  How to solve this?  What are the steps to take.

  Welcome to the HP Forums @ace8,

  I came across your post about Windows Update error "80070490" you received on your Windows Vista system and I wanted to respond to try to help.

  Here are two documents that I found on the Microsoft website on errors:

  1. Windows Update, error 0 x 80070490
  2. Windows Update error 80070490

  If there are problems with the printer features, let me know a description of the printer problems and I will do my best to help.

  Click the thumbs up below to say 'Thank you' & the "Accept as Solution" If the problem has been resolved it please and thank you!
  
  All the best,

• Windows Update has failed. "Error found: Code 8007001F Windows Update encountered an unknown error." _

  RALink - network - 802.11n/b/g Wireless LAN USB 2.0 Mini adapter 379ko

  Windows Update has failed. "Error found: Code 8007001F Windows Update encountered an unknown error."

  I bought a wifi USB adapter and it is a driver windows 7 available on the manufacturer's website. RALink

  http://eng.ralinktech.com.tw/support.php?s=1

  My computer is a HP P6110f desktop computer. It came with a Vista 64 OS which I've upgraded to a Windows 7 Home Premium.

  I tried to install all kinds of different ways but were not able to make it work.

  Disconnect all other devices driver/software uninstalled and reinstalled all plugging adapter in each computer startup I tried port USB with adapter connected and also connect after windows load discharged from all applications running, including firewall and anti-virus

  Can you please help me solve this problem? I consider myself quite computer but I'm completely puzzled here.

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7
  Windows 7 discussion groups

  They may be able to help in obtaining the wifi USB adapter to work.

  8007001F (a device attached to the system is not functioning) TaurArian [MVP] 2005-2010-implementation to date of Services

• Windows Update crashes when looking for updates to install

  From: miranda

  I can't get more updates. whenever I do a search for updates the search bar continues to research, he never stops! and then I have to close the browser with taskmanager because clicking on the x freezes the browser.

  From: TaurArian

  If you have a wireless router: in the Security tab, verify that you are not blocking tool.

  Possible reasons: -.

  1 Internet Explorer temporary files corrupted.

  2. background Intelligent and service not started event log

  3 C:\Windows\SoftwareDistribution folder is corrupted

  4. you need to re-registered some DLLs

  5. you may need to add Windows Update to the Trusted Sites Zone:

  6. the spyware.

  7. the third-party programs running in the background.

  8 ActiveX controls corrupted

  Suggestion 1: -.

  Deletion of temporary Internet files, cookies and history in Internet ExplorerTools > Internet Options > general

  You'll see Delete Cookies, delete files, delete history of

  NB: "delete all offline content", will remove all the files needed to browse websites offline.

  Restart and try Windows Update.

  Suggestion 2: -.

  1: Verify that the Background Intelligent Transfer Service is set to automatic and the status is started.

  Click Start, choose run and in the run box, type services.msc, click OK

  Locate the Background Intelligent Transfer Service service and click to select.

  Select properties, and in the Startup Type list, select automatic. Check the service status is started. Click OK.

  2. check that the event log service value is set to automatic and make sure that the status is started

  Click Start, choose run and in the run box, type services.msc, click OK.

  Locate the event log service and click to select.

  Select properties, and in the startup type list, select automatic. Check the Service status is started. Click OK.

  3. register qmgr.dll and qmgrprxy.dll

  Click Start, choose run and in the run box, type regsvr32 qmgr.dll, click OK.

  Click Start, choose run and in the run box, type regsvr32 qmgrprxy.dll, click OK.

  Proposal 3: -.

  It is possible that the contents of the C:\Windows\SoftwareDistribution folder has been corrupted, so try to rename the folder C:\Windows\SoftwareDistribution. Click Start, choose run.

  In the run box, type services.msc.

  Click OK.

  Right-click the automatic updates service. Click on stop.

  Stopping the service will take a moment.

  Rename the folder "C:\Windows\SoftwareDistribution":

  a. Click Start, run, type: systemroot

  Click OK.

  b. right-click on the C:\Windows\SoftwareDistribution folder, and then click Rename.

  c. Type SoftwareDistribution.old, and then press ENTER to rename this folder.

  Click Start. Choose run.

  In the run box, type services.msc.

  Click OK.

  Right-click the automatic updates service. Click Start.

  Starting the service will take a moment.

  Please note that your update history is contained in the "datastore" folder and when you rename the Software Distribution folder, the history is lost, but it is not important. You can, if necessary, copy the contents back to the renamed softwareDistribution.old folder. Losing the history of Windows

  Updates is not important.

  Proposal 4: -.

  Some files may have become not saved, and you will need to register them again: -.

  Click Start, choose run and in the run box, type regsvr32 wuaueng1.dll, click OK.

  Do the same for the other files: -.

  c:\windows\system32\dllcache\wucltui.dll

  c:\windows\system32\wuaueng.dll

  c:\windows\system32\wuapi.dll

  JScript.dll

  MSXML. DLL

  MSXML2. DLL

  MSXML3. DLL

  Proposal 5: -.

  Add Windows Update to the Trusted Sites Zone: Please note that the security settings in Internet Explorer must be set to medium or lower for ActiveX files correctly pass to your computer.

  Only the Web sites listed in the Internet Explorer Trusted Sites Zone will be affected by the reduction of the security settings. Your current security settings for all other Web sites will remain as they are currently

  configured.

  Open Internet Explorer, click Tools and then click Internet Options, click Security. Click the Trusted Sites Zone. Click Sites. Claire so requires a secure server (https :) for all sites in this zone check box.

  Use the Add button next to the add this Web site to the zone to add the following sites:

  http://*. Update.Microsoft.com

  https://*. Update.Microsoft.com

  http://download.windowsupdate.com

  Proposal 6: -.

  The links below will help you control your system from parasites: http://aumha.org/a/noads.htm

  http://inetexplorer.MVPs.org/tshoot.html

  Please note that some malware may kill the internet connection when it is removed, the program at the link below you will find the internet connection.

  http://www.cexx.org/LSPFix.htm

  Spyware links:-

  http://www.Microsoft.com/athome/security/spyware/software/default.mspx

  Www.lavasoftusa.com (Windows Defender) Ad-Aware

  Spybot http://www.Security.Kolla.de

  The malware removal

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  THE PARASITE FIGHT - find, removing & protect yourself from Scumware

  http://aumha.org/a/parasite.htm

  Guide of Richard Harper for the cleaning of parasites

  http://rgharper.MVPs.org/Cleanit.htm

  Proposal 7: -.

  Make sure that you have anything blocking Windows Update like Norton, Zonealarm etc.

  Also be sure that you do not have an accelerator to work behind the scenes as NetZerio, HiSpeed, etc. SpeedBand.

  Proposal 8:

  If you need to reinstall the ActiveX controls (because they have become corrupt): -.

  Follow this article-

  The Windows Update Web site and the Microsoft Update Web site do not analyze the updates when you repair a failed installation of Windows XP Service Pack 2 or Windows XP Service Pack 1

  http://support.Microsoft.com/kb/916259

  --

  TaurArian [MVP] 2005-2009 - Update Services

  http://taurarian.MVPs.org

  ======================================

  Another response of the community of Windows Vista discussion groups

• 0x800A0046 0 x 80248011 0x80072EE7 0x8024402C 0x8024502D 0x800A01AD site Web Microsoft Windows Update or connect to the Microsoft Update Web site

  • 0x800A0046 0 x 80248011 0x80072EE7 0x8024402C 0x8024502D 0x800A01AD? Regds, 'a journey of a thousand miles begins with a first step."

  Resolution for the error Code:

  0 x 80248011, 0x80072EE7, 0x8024402C, 0x8024502D, 0x800A0046, 0x800A01AD

   

  When you try to connect to the Microsoft website Windows Update or connect to the Microsoft Update Web site, you may receive one of the following error codes:

  • 0x800A0046
  • 0 x 80248011
  • 0x80072EE7
  • 0x8024402C
  • 0x8024502d
  • 0x800A01AD

  CAUSE The 0x800A0046 error code may occur if one of the following conditions is true:...

  • The 0x800A0046 error code may occur if one of the following conditions is true:
    • The logon user account belongs to the guests or limited account groups.
    • The security descriptor does not have authenticated users run Windows Update or Microsoft Update.
    • The impersonate a client after authentication policy is missing the account administrator and Service in the list of users and groups.
  • Error code 0 x 80248011 may occur when there is a problem with the database that stores Windows Update or Microsoft Update information on your computer.
  • The 0x80072EE7 error code may occur if the client computer cannot find the correct IP address when it tries to resolve a URL for the Windows Update Web site or the Microsoft Update Web site. This error can occur if the Hosts file contains a static IP address.
  • The 0x8024402C or 0x8024502D error codes typically occur because there is an incorrect character in substitution of proxy settings.
  • The 0x800A01AD error code may occur if the c:\windows\system32\wuaueng.dll file is missing or is not registered correctly.

   

  RESOLUTION

  0x800A0046 error code to resolve this error, use one of the following methods: me...

  0x800A0046 error code

  To resolve this error, use one of the following methods:

  Method 1: Remove the user account that is experiencing difficulties for customers or account groups

  1. Click Start and run, type control admintools, and then click OK.
  2. Click on computer management.
  3. Expand local users and groups.
  4. Select users.
  5. Open the account used to access Windows Update or Microsoft Update.
  6. Click on the Member tab of.
  7. Select the user account you want to remove, and then click on remove.

  Method 2: Set the security descriptor

  1. Click Start, run, type cmd, and then click OK.
  2. Type sc tisb wuauserv D: (A; CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL unit), and then press ENTER.

     You will receive a message of 'Success'

     Note the Sc.exe tool is not available in a default Windows 2000 installation. The Sc.exe tool is from the Microsoft Windows 2000 Server Resource Kit.

  3. Type Exit to close the command prompt.
  4. Try Windows Update or Microsoft Update again.

  Method 3: Add the Local Administrator and accounts Service him impersonate a client after authentication

  1. Click Start, click Run, type secpol.msc and press ENTER.
  2. Expand local policies.
  3. Click user rights assignment.
  4. Double-click to open the impersonate a client after authentication
  5. On the local security settings tab, click on add a user or group, and then add the administrator and the Service to the list of users and groups.
  6. Click OK and restart the computer.

  Method 4: Configure the remote procedure call (RPC) service to log on under a Local System account

  1. Click Start and run, type services.msc, and then click OK.
  2. Find and right-click the remote procedure call (RPC) service and then click Properties.
  3. On the connection tab, click Local System account, click on apply and then click OK.
   

  error code 0 x 80248011 before solve you this problem, clear the Microsoft Internet Explorer cache. To do this, follow these steps:

  1. In the Internet Explorer Tools menu, click Internet Options.
  2. On the general tab, click on delete files in the temporary Internet files section.
  3. Click OK, and then click OK again.

  To resolve this error, recreate the database that stores Windows Update or Microsoft Update information on your computer. To do this, follow these steps:

  1. Click Start, click Run type cmd in the Open box, and then click OK.
  2. At the command prompt, type the following command and press ENTER: net stop wuauserv
  3. At the command prompt, type the following command and press ENTER: cd /d c:\Windows\SoftwareDistribution

     Where c:\Windows is the folder where Windows is installed.

  4. At the command prompt, type the following command with the quotation marks and press ENTER: rd /S /Q DataStore
  5. At the command prompt, type the following command and press ENTER: net start wuauserv.
  6. Close the command prompt window.
   

  0x80072EE7 error code to resolve this error, examine the Hosts file. (This file can also be hosts. Sam.) Make sure that the file lists all the entries IP static for the Windows Update Web site or the Microsoft Update Web site.

  The Hosts file is located in the C:\Windows\system32\drivers\etc folder. To view the Hosts file, you may need to associate the file with Notepad. To do this, follow these steps:

  1. Right-click the Hosts file.
  2. Click Open with, and then select Notepad from the list of programs.

  If the Hosts file contains a static IP address that is associated with Windows Update or Microsoft Update, comment the entry by adding the sign # at the beginning of the entry. You can also delete the whole line and save the changes to the Hosts file.

  Note programs, such as Web accelerators, accelerators DNS, utilities of caching DNS and Spyblockers, can add static IP entries for the Windows Update Web site or the Microsoft Update Web site to your Hosts file. This scenario can cause Windows Update or Microsoft Update to fail.

   

  error codes 0x8024402C or 0x8024502d to resolve these errors, remove the characters from the list of exceptions to the proxy, and then clear the proxy cache. To do this, follow these steps:

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.
  3. Click the Connections tab, click LAN settings, and then advance.
  4. Delete any entry in the Exceptions section.
  5. Exit Internet Explorer.
  6. Click Start, run, type cmd, and then click OK.
  7. Type the following commands. Press ENTER after each command.
     • proxycfg d
     • net stop wuauserv
     • net start wuauserv

  0x800A01AD error code to resolve this error, use one of the following methods. Method 1: Register the MSXML program files to register the MSXML files, follow these steps.

  Note You may not have installed the files listed in steps 3 and 5 on your computer. If you don't have one of these files, when you try to save the file, you will receive an error message similar to the following error message:

  LoadLibrary (".dll") has failed - the specified file name could not be found.

  You can ignore this error message and continue to the next step.

  1. Click Start, click Run, type regsvr32 Msxml.dll in the Open box, and then click OK.
  2. When you receive the following message appears, click OK:
     DllRegisterServer in Msxml.dll successful.
  3. Click Start, click Run, type regsvr32 Msxml2.dll in the Open box, and then click OK.
  4. When you receive the following message appears, click OK:
     DllRegisterServer in Msxml2.dll successful.
  5. Click Start, click Run, type regsvr32 Msxml3.dll in the Open box, and then click OK.
  6. When you receive the following message appears, click OK:
     DllRegisterServer in Msxml3.dll successful.

  Method 2: Save the file c:\windows\system32\wuaueng.dll to save the c:\windows\system32\wuaueng.dll file, follow these steps:

  1. Click Start, click Run, type regsvr32 c:\windows\system32\wuaueng.dll and then click OK.
  2. When you receive the following message appears, click OK:
     DllRegisterServer in successful c:\windows\system32\wuaueng.dll.

  Kind regards
  Sohail Patel

  Regds, 'a journey of a thousand miles begins with a first step."