Windows updates could not be downloaded or installed
The last date on which Windows updates have been installed correctly on my PC has been on 12 August. Since that date something prevents me to install new updates. Whenever I click on the "Install updates" button on the box "Download and install new updates on my computer" for Windows Update tent to start downloading (the green progress bar appears for a second or two), but then my PC back to the "yellow shield with the message box"download and install the new update on my computer". At first I thought it was just busy at Microsoft, so I waited until a 'downtime' to try again. Same no result... no download. Several updates again 'important' security, but also the other "Recommended" updates are waiting for download and install, but I can't understand how prevents download of launch. I ran my anti-virus several times more than my 2 x a week all the scan in the hope that there is some sort of bug that prevented my access to Windows Update, but no luck. I also read a lot of Forums to see if there are other users having this problem of sam and have not seen any other comments.
There is another bug that I have yet to understand that everything began to happen within the last week and there may be a link between the inside and the problem I am having with Windows Update. I have a dialog box that is displayed on my screen for less than one second every 10 seconds or more. I have read this program is located on the area and it's "C:\\Windows\system32\wuauclt\exe", but sometimes, the dialog box that appears is 'C:\\Windows\system32\SndVol\exe' and in the box itself, it says "program too big to fit in memory".
I have a Dell XPS M1530 and Windows Vista with Service Pack 2 installed. 32-bit Intel Core II Duo CPU T8100 @ 2.10 GHz and 4.00 GB RAM
Any Suggestions on how to fix any of these issues?
Hello DAN to GO.
Try to start your system in safe mode: |
|
To resolve this problem, use the tool (SFC.exe) System File Checker to determine which file is causing the problem, then replace the file. To do this, follow these steps:
- Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
- Type the following command and press ENTER: sfc/scannow (Yes there is a space after sfc) the sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
Hope this helps you. Let us know anyway. Make it a great day!
"In the end the love you take is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)
Tags: Windows
Similar Questions
-
Hello
I am trying to install Windows Virtual PC and Windows XP mode on my computer toshiba laptop. The compatibility tool h/w PC said that my PC is h/w support, assisted virtualization (BIOS and processor support for virtualization extensions).I installed Windows XP Mode.
I am trying to install Windows Virtual PC on my Tablet RTM of Windows 7 Enterprise Edition 32 bit and it fails with below:
Windows Update could not be installed due to the error 2149842967 "' (command line:""C:\WINDOWS\system32\wusa.exe" "C:\Users\vishalt\Downloads\Windows6.1-KB958559-x86.msu" ")
I tried several options suggested as
(a) restarts - did not work
(b) netstop wuauserv, wicks, rename the softwaredistributionfolder, netstart these services (the two) and try windows complete update - windows update has started but I still couldn't install the KB958559
(c) try cmdprompt in a high of UAC cmd window.I was wondering if there is something else that needs to be done to install this package KB.
Thanks in advance
Vishal-... The link for Windows Module game and the registry size limit could not be tried because the links on these threads do not seem to work.
I know. You will see that I asked a moderator to post a valid link for this thread.
Have you seen http://social.technet.microsoft.com/Forums/en/w7itproappcompat/thread/61e16760-a500-481e-a90c-9b933f0fced8 ?
I'll keep you posted if I hear anything new. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Windows Update could not produce the result page?
Windows Update could not produce the result page.
Hi RobertRaney,
1. you receive an error message when you open Windows Update?
2. have you done any hardware changes or software on your computer before this problem?
You can follow this link & check if the problem persists:
Hope the helps of information.
-
Windows Update could not be installed (KB2619340, KB2628259)
Windows Update Failed to Install, had many necessary updates and have gone through almost all (broken them so I could see what and wouldn't install)
All EXCEPT 2 which are - security update for Windows XP Edition Media Center Edition 2005 Update Rollup 2 X 86 (KB2619340) and the security update for Windows XP Edition Media Center Edition 2005 Update Rollup 2 X 86 (KB2628259)
These 2 won't work, start then fail... ???
Hi JackPereira,
· Did you do changes on the computer before the show?
· You get the error message?
· You are able to install other updates successfully?
Follow these methods.
Method 1: Temporarily disable the security software.
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
Method 2: Put the computer in a clean boot State to see if there is a software conflict as the clean boot helps eliminate software conflicts.
Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.
After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.
(a) click Start, run.
(b) type msconfigand click OK.
(c) the System Configuration Utility dialog box appears.
(d) click the general tab, click Normal startup - load all services and device drivers and then click OK.
(e) when you are prompted, click restart to restart the computer.
Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.
http://www.Microsoft.com/downloads/en/default.aspx
Method 4: Follow the steps in the article.
-
Windows updates could not be installed error 80200053 codes & FFFFFFFE 80070570,.
When I run the update the files are downloaded and Setup starts, the message of the screen then indicates that updates could not be installed error code 80200053 & FFFFFFFE 80070570,.
0 X 80070570 - ERROR_FILE_CORRUPT
The file or directory is corrupted and unreadable.Also the error when you install an update for Windows: "error Code FFFFFFFE.
http://support.Microsoft.com/kb/2525311Can also apply to Vista
This problem can occur if the system is infected with a malware (malicious software).
-
ERROR; Windows Update 646 unable to download and install updates
original title: ERROR; Update Windows Update 646___windows update 00000646 windows dt 000__it blocks the download and installation of updates
Hello
It is a Microsoft Fixit who will help with this issue.
You receive code 646 error or error code 0 x 80070646 when you try to install Microsoft
Office updates
http://support.Microsoft.com/kb/2258121Check this thread:
http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/18449f60-C149-4EAF-B8E6-a2880cd7232b
------------------------------------------------------------
If necessary you can incident free get reports however the above should take care of it for you.
Windows updates - free Incident report
Go here and click on-> Windows Update fails while searching, downloading or installation of updates
http://support.Microsoft.com/GP/wusupport#tab3The security updates, you can get free support Incident report
http://www.Microsoft.com/protect/resources/support.aspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
OS Windows XP Anti virus Windows Defender attack 10/12/2011 Date. Started getting error messages telling me I had problems with memory and hard drive. I was responsible for carrying out the difficulty system for repair charges. Display shows failed to load segment, critical error of hard disk, hard drive damaged clusters, weak and delayed by ram reliability covered clerical errors screen. Update to Windows defender and attempted to update to Windows XP. Impossible to update despite following the instructions shown.
Hello
1. what tool to fix system did you run in order to solve the problem?
2. what exactly happens when you try to run Windows Update?
3. you receive an error message when you try to run Windows Update?
4 you did changes to the computer before the show?
5. have you tried to download Microsoft Safety Scanner?
Method 1:
Step 1:
You can try the steps of troubleshooting provided in the link below to fix problem with Windows update in Windows XP.
Cannot install Windows updates
http://support.Microsoft.com/kb/555461
Step 2:
Reset the Windows Update components
http://support.Microsoft.com/kb/971058
Method 2:
For the question with HDD, you try performing the control and verification of the disk if the problem persists.
How to perform disk error checking in Windows XP
http://support.Microsoft.com/kb/315265
Note:
Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost
Method 3:
In case you haven't tried download Microsoft Safety Scanner, then try to download Microsoft Safety Scanner and perform a full scan of the system and check if the problem is caused by a Virus/Malware.
Microsoft safety scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note:
The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
-
Help please - error code 8E5E0147 - KB2808679 & KB2838727 Windows updates could not install
Vista Home Premium SP2 32 bit Dell Inspiron 530
After reviewing the history, I see that he tried to install these updates since December 2012. I tried MicroSoft Fix It and he stats everything is fixed, but updates will not install yet. I read that Microsoft is not support Vista after 2012 it is why I have problems?
Thanks for your help.
Hello
You are welcome.
Download and install update KB2832727 manually in a clean boot state. Check out the following link to learn more about the clean boot.
Keep the computer in a clean boot and check the status of the issue.
How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8.
http://support.Microsoft.com/kb/929135
Note: please go through the section: How to reset the computer to start as usual after a clean boot troubleshooting section of Kb to start the computer to a normal startup after you fix the problem.
I hope this helps.
-
Windows Update could not search for new updates
Update of Windows gives an error, Windows could not search for new updates
Error (s) found:
Code D 8007370 Windows Update encounter an unknown error. There is no articles about this error code, and the last windows update has been installed on 2 May. Fixes for this problem?Hi Rob_in_COS,
Thank you for using answers Forum.
I found this article which deals with your question:
System Update Readiness Tool what Windows Update installation errors can possibly answer?
The following table lists the error messages that you may receive when you try to install a software update. These errors may be caused by a deficiency of the system the system update readiness tool may be able to resolve. However, the tool may be unable to fix all instances in which these errors occur.
0x8007370D
ERROR_SXS_IDENTITY_PARSE_ERROR-
An identity string is malformed.
Microsoft Download Center
You can download manually rates system update readiness tool from Microsoft Download Center. The current version of these tools are released in April 2009. The following files are available for download from the Microsoft Download Center:
For all supported versions based on the x 86 Windows Server 2008 and Windows Vista
Download Windows Vista and Windows Server 2008 for 32-bit systems package.
(http://www.microsoft.com/downloads/details.aspx?FamilyID=0435684b-8d12-4028-9cb0-b2903257f1fd)
For all supported versions based on the x 64 of Windows Server 2008 and Windows Vista
Download Windows Vista and Windows Server 2008 for x 64-based systems package.
(http://www.microsoft.com/downloads/details.aspx?FamilyID=b950e3b1-3267-41c2-8f10-1fe9a4bfa44d)
More information is available here:
http://support.Microsoft.com/kb/947821Please let us know if that helps.
Chris
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Windows Update could not search for new updates error code 80092026
Note that Windows fails to return information to update and ends, so no access to the update site is possible by this means. What relief is available?
From journal Windows Update:
2010-05-03 01:05:20:325 1076 128 c putting featured update notifications. fIncludeDismissed = true
2010-05-03 01:05:20:325 1076 128 c no. feature updates available.
2010-05-03 01:05:25:106 1076 1434 report REPORT EVENT: {56DA38C3-AB55-476E-8D3C-D4950D386816} 01:05:20:091 2010-05-03-0400 1 148 101 {00000000-0000-0000-0000-000000000000} 80092026 0 AutomaticUpdates failure software synchronization Client Windows Update not found with error 0 x 80092026.
2010-05-03 01:05:25:294 1076 1434 report CWERReporter::HandleEvents - WER report upload completed with status 0 x 8
2010-05-03 01:05:25:294 1076 1434 WER sent report: 7.4.7600.226 00000000-0000-0000-0000-000000000000 0 x 80092026 Scan 101 unmanaged
2010-05-03 01:05:25:294 1076 1434 CWERReporter finish event management report. (00000000)What information to post in the windows update forum.
http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/1467f44b-ee27-4F7D-98d7-f1c4b35b3395
incorrect tag value 0 x 80092026 Crypt_E_Security_Settings ASN1 met
the cryptographic operation failed due to a local security option setting.
Windows 2000, windows xp & windows 2003 ONLY *.
Start/run
Type "gpedit.msc" ENTER
Click + configuration of the computer
Click + Windows settings
Click + security settings
Click on + Software Restriction policies
Click + by trusted publishers
To "allow the following users select trusted publishers", the default value is "users".
If you do not have it at all, this does not apply.
This is usually the activeX error or the 0x800b0004
==================================
the log file contains "error 0 x 80092026: failure of the cryptographic operation due to a local security option setting ', error. This occurs due to local security settings, to solve the checking number of 'safer' registry key and delete it.
Find the following key
Start/run
Typr "regedit" ENTER
HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\
SystemCertificates\TrustedPublisher
Under "TrustedPublisher" look for "Safer" key.
Delete the "Safer" key if it is there.
-
HP XW 6200 windows xp windows update could not load after restart
Hi all
Today 07/04/2011, I had a few updates microsoft security and I have installed it on my machine which is HP XW 6200 desktop running Win XP Professional. After the updates it asked me to restart and since then, it keeps me in the loop and said that something has changed (hardware/software) so follow these steps
Start in safe mode
Start in safe mode with networking
Start in blah blah
Start windows with the best know configuration that worked
Start windows normally
It demonstrated windows loading and then it throws me back to the option screen, but between that a blue screen appears for a milliseconds which I can't read what it says. I tried all options but it keeps throwing me back to the screen and now I'm sort of an infinite loop. I ran so many updates in the past without problem and what happened the first time. Help, please.
Hello
OK, maybe-, you have the disc divided into partitions? (C: D: ...)
try to run from the command prompt:
DiskPart
and in diskpart program write:
list disk
and then:
the list volume
COPY the result of the drive in the list and result of the volume of the list
for the release of the writing of diskpart:
Output
LC
-
Windows Update does not install some updates; can not download iTunes or Adobe updates
For about a month now I had trouble downloading the updates. Windows Update is not good download and install an update called update security for Microsoft Works 8 (KB973636). The details of the error say Code 646. I was try and do not install this update for a month. Other updates are installed automatically without any problem. I was also unable to download iTunes and Adobe updates. During the download, a window pop up that says "Error in installation" and the program closes. I don't know if these issues are related to a problem with a previous update, which I downloaded from Windows Update?
If you find the error code 646 thread, read this:
http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/f3390e74-9961-4AAE-8a05-554c1a9cf1a2 Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
Windows Update still says "Windows 10 could not be installed"
This is a supplementary question of "W - 7 portable is still trying to move to W - 10.
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/w-7-laptop-is-still-trying-to-move-to-w-10/0c0f4b6f-A269-4e04-bc9e-c18a0b6c8078
Canadian technology has given me the help I needed to get Windows Update, run again, but remains a problem. Even after the download and installation of updates today, Windows Update always starts with "Windows 10 could not be installed" with the error 80004004-40019. Is it going to annoy my client forever or there at - there a way to reset Windows Update in order to start to show the previous screen of the remaining updates?
And to make the situation quite clear, the client never asked for Windows 10. His anti-virus caused all coming to a sudden stop (long story), which was actually a good thing because Windows 10 could not settle via deceptive tactics of Microsoft. I manually uninstalled all updates of Windows 10.
Suggest:
- Install the GWX Control Panel and use it to stop the thing Win10
- Set Windows Update to NEVER, and then you take responsibility and control to manage the process.
-
Update Windows 10 could not be installed
Windows 10 could not be installed and displays the error code: 80240031. Download is 100% and the error message shows. Please someone solve this problem.
Thank you
Review:
- How to: 10 tips before installing Windows 10
- How to: 10 things to do if the Windows 10 install fails.
Retry the upgrade manually:
Option 1:
Download the media creation tool
Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.
Note: How to check if you are downloaded or installed the update Windows 10 November
How to create an ISO or USB drive.
Select upgrade this PC now and then click Next
Option 2:
Task of pre-required
When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1
- How to back up and restore your files manually
- How to free up disk space in Windows
- How to: 10 tips before installing Windows 10
then
- How to download official Windows 10 ISO files
- How to: upgrade previous versions of Windows using the file ISO for Windows 10
then
- Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
- Reboot several times, and then try again.
- Disable the general USB peripherals (for example - smart card reader).
- If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
- Perform a clean boot, restart, and then try again.
- If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
- If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
- If this does not work, try using the. ISO file to upgrade if possible.
- If you are connected to a domain, go to a local account.
- If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
-
Pavilion sleekbook 14pc: WINDOWS updates to DAY AS DOWNLOAD, BUT DO WILL NOT INSTALL
my windows update will not work. He says that it is impossible to proceed with the installation and changes are undone.
everything seems to be quite appropriate when cking pc settings, HOWEVER, my HP Support Assistant was correct info to the bottom of the page where it says that I need a new ID for the operating system. I should just close the wizard checks to see if that will work around this info and maybe allow the updates downloaded install OR am I following a false trail?
I lost hours and hours for months trying to find a solution to this CHALLENGE without talking about money spent on assistance and programs that were supposed to address.
Has anyone else had such a challenge. Y at - it a solution?
Thank you
brenda1235 wrote:
Well, now that I've been through all this and try to get updates inally I am getting an error code nd have ckd it out and made all the troubleshooting recommended. Since I was now able to get internet this error code may have corrected a 8024, 000. My first error code...
Hello
Windows Update is damaged.
Please, do try the fixes and scan as shown in the first post.
In addition, follow all the steps detailed here:
Kindly let me know how it goes.
Maybe you are looking for
-
Why I was able to open google chrome, but not firefox which is my default?
I used firefox earlier; the network is down, then when I rebooted, Firefox would not start. When I clicked on the file, there was silence, and then a small sound noise deaf. Google chrome opens fine.Then, I downloaded firefox from google and I had my
-
vseamps.exe application error
Whenever I turn on my computer, I get this error message that reads as follows: "vseamps.exe application error. The instruction at "0x7c91b219" referenced memory at "0x000000" memory could not be "written".
-
Necessary to reach the line of Fax Long Distance access code
I have a HP all-in-one Officejet J4550 Copier-scanner-fax. My question is how can I send a fax when I need to enter a series of numbers without connection with the fax number to reach a long-distance line? It's a long story, but I mainly long dista
-
How to enable bidirectional support on the printer
original title; Printer problem I added a printer Canon ip2600 my laptop tried to print and received the message to turn on Enable bidirectional support in the printer dialog box.
-
Cannot get rid of the pop ups for coupons
Pop we free coupons appear as soon as I open a new application. A ran a Security Scanner from Microsoft - complete sweep, no virus or other bad things. Then in tools and turnned popup blocker. Could not find where they come from, but happens 20 to