Windows updates do not settle

Similar Questions

• Windows updates do not settle... Help

  We find the MS updates do not settle... worry particularly that we need all the security updates.

  Hi NormanBennett,

  1 Windows operating system you are using?

  2. you receive messages or error codes?

  3. when the problem started?

  4. you remember to make changes to the system?

  Method 1:

  You can read the following article and try to reset the Windows Update components and check.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 2:

  You can also view the history of update for updates failed which is the origin of the problem and return back with additional troubleshooting results.

  Check out the link:

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed

• the Windows Update page 2 contuinely Windows updates do not settle.

  TWO UPDATES OF WINDOWS CONTUINELY DO NOT SETTLE. DOWNLOADED THOW

  Hello

  1 updates are?
  2 how and where did you download these updates?
  3. you receive an error message? If so then after return the same thing.

  Read the following article that may help you resolve this problem.

  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798

  Cannot install Windows updates
  http://support.Microsoft.com/kb/555461

  How to troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation
  http://support.Microsoft.com/kb/906602

  You cannot install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after installing Windows XP SP3 immediately after a clean installation of Windows XP SP2 or
  http://support.Microsoft.com/kb/943144

• Many Windows updates do not settle.

  Original title: failure of the Installation of Windows Upgrades___

  I just bought a new HP Windows 7 Home Premium PC p6520f just 5 days ago. However, when I try to install the Windows updates (several listed as Important, the bulk of any upgrade fail to install.)  I tried all the troubleshooting unsuccessfully option.   I would appreciate help with this embarrassing problem.

  Tony - * address email is removed from the privacy *.

  Hello

  1 you get an error message during the installation of Windows updates?
  2. What are the troubleshooting steps you have already tried?

  Method 1.
  If your computer is experiencing problems find and install updates of the operating system, try using the troubleshooting Windows Update tool to solve the problem. He makes sure your computer is connected to the Internet and checks to see if your network card and Windows Update services are running properly.
  See the article below for additional information and steps.
  Open the Windows Update troubleshooting tool
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  Method 2.
  Also you can see the article below for some methods more.
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

  Method 3.

  Check if reset the Windows Update components allow you to install updates correctly.
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  I hope hear from you soon!

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows updates do not settle down with error Code: 800700 1 code

  There are 8 updates in all and I tried a clean boot and all the trouble shooters

  code 800700c 1 windows update encountered an unknown error
  https://social.technet.Microsoft.com/forums/Windows/en-us/810bdc96-e29d-40d3-ABA2-a95b25e77292/code-800700c1-Windows-Update-encountered-unknown-error?Forum=w7itproinstall

  https://www.Google.com.au/search?q=code+code+800700C1&SourceID=IE7&RLS=com.Microsoft:-to THE: IE-address & ie = & oe = & gfe_rd = cr & ei = 7co-VP3LPOXC8gf23YHIAg & gws_rd = ssl

• some Windows updates do not install on Windows vista.

  Original title: update failure

  I am running Windows Vista Ultimate on a Dell Vostro laptop.

  Recently I received notice of update of the computer (where the sleep button turns red with the shield of Microsoft - so that when you click on it begins to install the updates before you shut down). However, the first question, I noticed was the extraordinary length of time it took to 'install' updates... more than 8 hours, in many cases, this can be problematic because he inisists that you do not feed disabled or stopped during the process.

  Despite the long waiting to install the updates that several "important" updates several times not to settle, which inevitably means that the next day that the computeer said that it has developed important to install...

  Updates is fails to install.
  KB2443685
  KB970430
  972145 KB
  KB967723
  KN2345886

  Can someone help me?

  Hello
   
  1 did you changes to the computer before the show?
  2. it give you any error message?
   
   
  Method 1:
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/

  Method 2: Windows Update or Microsoft Update repeatedly offers the same update

  http://support.Microsoft.com/kb/910339

  Method 3:

  SFC scanner. Analysis (sfc) System File Checker will Windows replace corrupted or missing system files on your computer.

  Scan sfc enforcement procedure:
  a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  b. click on continue or provide administrator credentials if prompted.
  c. in the type in the following command prompt window and press ENTER:
  sfc/scannow

  Refer to this article for more information:
  http://support.Microsoft.com/kb/929833

  Method 4:

  Put the computer in a clean boot state, download and install the updates and see if that helps.

  Download here:
  http://www.Microsoft.com/download/en/default.aspx

  Clean boot: here is the link:

  Here is the link:
  http://support.Microsoft.com/kb/929135

  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.

• Pavilion G7 1355 A9Y70EA: windows update does not

  I had to do a complete reinstall of my windows 7 and even recovery if everything else seems in good condition, the function of windows update does not work despite my now do a restore complete 3 times and also executes all microsofts fix programs for this problem, also tried several fixes YouTube, but nothing works , are getting desperate now. He said only updates and the small bar just keep on crossing of forever with nothing else to be... Help...

  Thans for the answer, I understand what you say, it's just that, until I discarded the computer a few days before (by foolishly following a tip to youtube to speed up computer that has totally stopped it start) windows update worked very well and it has been since a windows 10 installation and a removal of windows 10 the next day a few months ago. The folder c:\Windows\SoftwareDistribution/windows/download exist with only 2 files with names very long gibberish and it is only 15 kb and the other file is 39 k, which seems to be far big enough for any update. I was wondering if instead of the clean install from the recovery partition would be any different doing a clean install from the recovery disks that I did when I got the laptop? see you soon

  Made no difference with update disk and these 2 small updates are only updated Adobe and after 3 off straight, the bar is still meandering along, my update history shows only updates from 2012 when win7 was installed everything first... * beep * Microsoft!

  P. S.

  Yesterday, I decided I had enough and started to install windows from a download 10 earlier, but after it began, I thought "no you know you hated" so I canceled the installation. That's about 3 hours later when I went to stop the laptop it says close and install the updates, so, after 4 hours of installing updates 251 and restarted then installed another 41 updates, then again on the next closure, so basically, I think that the few installation the windows 10 made seemed to start updates to speed?

• Windows Update will not download, just stays at 0%

  Hi, past the month or so my windows update will not download at all. I never had no problems until now. Im running on windows 7 64. I'll start, click windows update and download hit. Once I have click on windows update, it just sits there with the bar running, showing me his 0%. Please if someone might know a solution, that would help a lot.

  Yes.  I had the same problem, I installed the update when my power went out, so I couldn't download it, but managed to get the update that I needed the microsoft Web page and we smooth sailing since then.

• Windows Update does not properly

  I am running windows 7 on a hp Q8300 quad core desktop computer processor.  Windows Update (do not remember the official name) has worked well up until now.  2 days ago it downloaded updates and and asked to close at the end of a session, as it is often done without any problem.

  Now when you start again it says something like "processing and installation of updates 0% complete, do not turn off your computer.  It was 0%.  Finally, it will start in any case, but updates are not yet installed.

  Thanks in advance for your help.

  Download and save the Fixit on this page - How to reset the Windows Update components?
  Once the download is complete, close all open programs and browsers.
  Now Configure the system to boot .
  NOTE: If a 3rd party firewall was previously used, open Windows Firewall in Control Panel to make sure that the native Windows 7 firewall is now on.
  In the clean boot state, all the firewalls of 3rd party will be disabled. Using the Fixit the system must be connected to the internet.

  Now run MicrosoftFixit50202.msi and choose the default mode. Reboot the system to the same State of clean boot and see if he can find, detect and download updates now. If it is possible, then Cancel the Clean boot steps and restart in normal Windows mode.

  In normal Windows mode, can the system installs updates now?

  If this isn't the case, configure the system to boot once more and run the Fixit by using aggressive mode. Restart when it's done and follow the steps above to see if the system can update now.

  MowGreen Services update - consumer safety

• Windows Update does not

  my windows update does not work. whenever I try to update says internet explore cannot display the Web page. and say what you can try: diagnose connection problems. my connection is good. What's wrong!

  What browser with version number that you are using?

  fix it for me http://support.microsoft.com/kb/956196

  If all else fails it could actually be an infection that prevents the download. to ensure that your system is free from all threats and then repeat the download. You can run a scan online free at windows live onecare security scan windows 7\vistahttp://onecare.live.com/site/en-us/center/whatsnew.htm windows live onecare safety scanner windows xphttp://onecare.live.com/site/en-us/default.htm wait your computer will be unavailable for a while. do not work on your computer while the scanners however running, he messes things.

• Windows update - Windows Update is not restore my windows/desktop computer after installing updates

  When running Windows Update is not reproduce my office and rather trashes everything.  Ysterday I left to work with over a dozen research Internet Explorer open and this morning, I get to a Windows auto update cycle, which wrecked all.  Well Yes, they are lost and of course, I can spend an hour or more to find once again but my boss is breathing down my neck, as if it was my fault.  Microsoft how inconsiderate!

  Of course, I have a solution, TURN OFF Microsoft Update but is this really what Microsoft wants?

  Please people think.

  Hi jbeech,

  No, I don't work for Microsoft and I am not associated with them in any way (other than to receive awards and certificates I earned on my own).  I'm a volunteer civilian gift free time to help other people.

  I meant nothing personal, per my comments of workflow.  I was just trying to do my best to help you avoid this problem in the future and apologize if you took it the wrong way.  I agree with you that he must restore it things automatically (as it does when you use the hibernation), but maybe that can be done (at least not always) because updates may affect items that are open and to update these programs must be closed (which makes saving them more difficult because if they look different after the update) It may not work if we try to restore them unless they can find a way to save ONLY the information and it is a much more difficult task).  This problem does not occur with an accident or an unexpected shutdown (and a complete restoration in cases does not always work as well and completely that we hope - at least I had problems back exactly where I was with all that every time).

  While you can choose to turn off automatic updates, you don't want to not go for very long without updating your system, so checking periodically (although if you want to do on a daily basis - I would try at least every Wednesday at least since most updates are released every Tuesday) is important in all cases.  The option I suggested (i.e. automatic downloads but no facilities) would at least them already downloaded (you would not need to check - that they would be there) it would take much less time to choose and install if you show if off completely - and when you decide to install, you will find it takes MUCH more time because you need to download and install (unless they are already downloaded).  But it is entirely up to you.

  Good luck and best wishes!

• Windows Update does not work. Microsoft Update NOT work.error code 80072EE2

  Original title: Windows Update does not work. Microsoft Update DOES not work.

  Automatic update does not work.  When I try to manually update I get error code 80072EE2.  I tried Microsoft Automated Troubleshooting Services.  Whenever it reports it has repaired errors, however there is no improvement.

  There may be another reason -

  Most popular right now: http://support.kaspersky.com/viruses/solutions?qid=208280684

  TaurArian [MVP] 07/01/2005-30/06/2011. The information has been provided * being * with no guarantee or warranty. What works for some, may not always work for others.

• Windows Update will not be update__

  Windows Update will not update
  but all other internet activities are very well

  This isn't the firewall

  Reset Windows Update components:
  http://support.Microsoft.com/kb/971058
  http://support.Microsoft.com/kb/883825

  HowManage , Configure and troubleshoot Windows updates releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Windows Update could not be installed due to the error 2149842967 (KB958559-x 86.msu)

  Hello
  I am trying to install Windows Virtual PC and Windows XP mode on my computer toshiba laptop. The compatibility tool h/w PC said that my PC is h/w support, assisted virtualization (BIOS and processor support for virtualization extensions).

  I installed Windows XP Mode.

  I am trying to install Windows Virtual PC on my Tablet RTM of Windows 7 Enterprise Edition 32 bit and it fails with below:
  Windows Update could not be installed due to the error 2149842967 "' (command line:""C:\WINDOWS\system32\wusa.exe" "C:\Users\vishalt\Downloads\Windows6.1-KB958559-x86.msu" ")
  
  I tried several options suggested as
  (a) restarts - did not work
  (b) netstop wuauserv, wicks, rename the softwaredistributionfolder, netstart these services (the two) and try windows complete update - windows update has started but I still couldn't install the KB958559
  (c) try cmdprompt in a high of UAC cmd window.

  I was wondering if there is something else that needs to be done to install this package KB.

  Thanks in advance
  Vishal-

  ... The link for Windows Module game and the registry size limit could not be tried because the links on these threads do not seem to work.

  I know. You will see that I asked a moderator to post a valid link for this thread.

  Have you seen http://social.technet.microsoft.com/Forums/en/w7itproappcompat/thread/61e16760-a500-481e-a90c-9b933f0fced8 ?

  I'll keep you posted if I hear anything new. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows Update will not end. ?

  Windows Update will not allow the installation of the updates.

  How to ask a question
  http://support.Microsoft.com/kb/555375 >

  It helps those answering questions if you provide:

  what version of windows (32-bit or 64-bit) and service pack level.

  you use what browser (exact version).

  what application or antivirus security suite is installed and your current subscription?

  What third-party firewall

  What anti-malware software can be installed.

  What updates you trying to install? (Number of KB)

  What error do you get everything when trying to install updates?

  A general solution, *IF* is no malware problem, would be to reset the update components:

  Access the KB article via Internet Explorer next (only) & run it in DEFAULT and AGGRESSIVE modes difficulty.

  How to reset the Windows Update components? http://support.Microsoft.com/kb/971058>

  Although this page States that this article does not apply to Windows 7, it does.

  The most effective way to use the Fixit above is to download, * except *, configure the system to boot, then run MicrosoftFixit 50202.msi and all first choose the default mode. Turn it back on.

  See if the system can update now. If no joy, run it again with the system connected to the internet, in aggressive mode. Turn it back on.

  See if the system can update now.

  Cancel the clean boot procedure, and then see if he can search for updates in Windows normal mode.

  How to configure Windows XP to start in a State of boot minimumhttp://support.microsoft.com/kb/310353>

  How to troubleshoot a problem by performing a clean boot in WindowsVista/Windows 7

  http://support.Microsoft.com/kb/971058>

  BTW, when a short "Windows Update" fix this "utility on this page, how to reset the Windows Update components?, the history of update file is deleted." This is why you don't see the update history even if the system can connect to Windows Update. Open the ReportingEvents.log located in Windows\Software Distribution to examine the history of update.