Windows updates: how notification before installed so can delay the update?

Similar Questions

• How can I boot from the Windows 7 Installation CD so that I can reformat the hard drive before reinstalling Windows 7?

  How can I boot from the Windows 7 Installation CD so that I can reformat the hard drive before reinstalling Windows 7?  I have already reinstalled Windows 7 from the CD, but that has not solved my problems.  When I put the factory CD in my CD player, it won't always boot from the CD.  When I put my Windows 7 Ultimate CD in the CD drive, it doesn't always start from the CD.         I realize that the reformatting is not always necessary, but I caught a few viruses (despite anti-virus running) and I need to start with a clean hard drive.

  On Friday, January 9, 2015 14:30:32 + 0000, BlueKodak wrote:

  How can I boot from the Windows 7 Installation CD so that I can reformat the hard drive before reinstalling Windows 7?  I have already reinstalled Windows 7 from the CD, but that has not solved my problems.  When I put the factory CD in my CD player, it won't always boot from the CD.  When I put my Windows 7 Ultimate CD in the CD drive, it doesn't always start from the CD.

  You must go into the BIOS and change the boot on CD order
  first push.

  How to get into your BIOS? It is not dependent on Windows, but on what he
  motherboard/BIOS card that you have. In fact, you need access to the
  BIOS before Windows begins to start. A common method is to press
  the key delete when you turn on first, but this is not necessarily true
  for your computer. Watch the display carefully when you start first;
  There is often a message here to tell you what to do. If this is not the case, check
  your system documentation or check with your provider.

• How do we install InDesign CC when the overview of the app says "updated" even if I haven´t whatever still installed?

  How do we install InDesign CC when the overview of the app says "updated" even if I haven´t whatever still installed?

  It seems that perhaps you have installed a trial at some point in the past and trashed the application folder rather than do an uninstall?

  Have you tried the cleaning tool:

  Use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

• Windows Media Player - reading issues error that Windows Media Player is not installed correctly. Reinstall the drive.

  When I click on a song in my library to play, an error message pops up saying "Windows Media Player is not installed correctly. Reinstall the drive.

  I have not had this problem before and it happened the day directly after my computer went through an update of Windows.

  A man ideas, please?

  Hi again Tom

  Windows has released a "remoteness" today update to remedy the situation (new update is kb3024777) so after installing it you can find out all is well again. (If not you could try the suggestion of fabien).

  Regards R

• Windows XP does not start. Can I boot Windows from a disk so that I can recover the data?

  Windows XP does not start. Can I boot Windows from a disk so that I can recover the data? This should be a CD because it doesn't have a floppy disk on my laptop drive. It is maybe that my hard drive has begun to fail and therefore cannot locate XP startup files. I can not start using one of the other methods of starting for example. Safe mode. If I can recover the data, I can then reload Windows and check the surface of the disc etc etc. Thank you all for your comments. Steve

  Lately, I'm leaning toward the Hiren's BootCD you can download here:

  http://www.hirensbootcd.NET/

  On the left, click on download, scroll down, choose the most recent version

  The download link is a little hard to see.  It is at the bottom of the page, above the drop for older versions and looks like this (click this component to download the ZIP file):

  Direct HTTP mirror + Torrent, Torrent Magnet

  Click the "Live HTTP Mirror" link to start the download and save the ZIP file on your desktop of somewhere that you can remember.

  The ZIP file is large, so the download will take probably some time to complete.  Then unzip the download to extract theHirens.BootCD.ISO file that will be used to create your new bootable CD.

  Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD.  You must use software that includes how to burn a. ISO to a CD to create a bootable CD.

  File ZIP the Hiren is the file BurnToCD.cmd that you can double-click to launch it.  The BurnToCD.cmd will use the file BurnCDCC.exe to burn the. ISO file onto a blank CD using your existing CD burner.  You can also use your own burning software as long as your software is able to create a bootable CD. ISO file.  More modern burning programs can create a bootable CD. ISO image.  Create a CD from an ISO image bootable is not the same as just the file on a CD burning.

  If you need a simple and CD burning, this is a free software popular software:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your new bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.
  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When starting on the Hiren's CD, you will see a menu of options.  Choose Mini XP.

  It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using.  You will feel at home.

  Using the Mini XP, you can access the Internet, maneuver around your system, copy files, replace the files, run the scans for malware, etc.  There are dozens of free and useful tools included in the CD that can be used to repair your system, or copy files to another device such as a USB device or an external drive if drop in trying to repair your system.

  If you want to see if you can fix your system, describe what is happening when you try to start and to answer these questions:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

• Windows Media Player is not installed correctly. Reinstall the drive.

  I am running XP Home and WMP v11. I get the following message when I try and play some files: "Windows Media Player is not installed correctly. Reinstall the drive.

  In the past I had to go back to WMP 10 to 9 and reinstall when this happened, but when I triedthis method , this time it did not work and said that he could not uninstall.

  The songs have played fine on WMP in the past and they are the ones I've owned for years rather than months.

  I can't think that I changed something on the PC to save this change, but clearly I.

  Any ideas?

  Try to download and reinstall

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=1d224714-e238-4E45-8668-5166114010ca

• I used "windows easy transfer", but after that I can see the files. Any idea about it?

  I used "windows easy transfer", but after that I can see the files. Any idea about it?

  original title: Windows easy transfer

  Hi Vrajeshparekh,

  1. what files you're talking about?
  2. When you see the files?

  When you use the Windows easy transfer cable to transfer the data that the data is copied. So you copy the data on the old computer also.

  Windows Easy Transfer (applies to Windows Vista)
  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-easy-transfer

  How Windows Easy Transfer makes setting up a computer easier? (Applies to Windows Vista)
  http://Windows.Microsoft.com/en-us/Windows7/how-does-Windows-easy-transfer-make-setting-up-a-computer-easier

• My ability to thunderbird to receive the mail suddenly stop and it worked before. What can be the reason? Now, I'm not able to receive all e-mails.

  My ability to thunderbird to receive the mail suddenly stop and it worked before. What can be the reason? Now, I'm not able to receive all e-mails.

  This forum is the official place to support Thunderbird. There is no phone support.
  If you think that this helps to explain the problem, you can add a screenshot to your message.
  You are supposed to follow instructions and suggestions that precede.

• I must first install CS3 on Windows 7 64 bit before installing CS5 Upgrade?

  I am replacing a graphic designer Windows Vista laptop with a desktop Dell Precision T5500 computer.  Should I Uninstall CS3 from the laptop and the serial number of decommissioned?  Then I have to install CS3 on the new desktop before installing CS5 upgrade?  I was told that I had to put the installation out of service, but I don't remember having to do with the other facilities.  Thanks in advance!

  Certainly, you should disable all software before uninstalling. But do not install CS3-CS5. Just having the serial number handy for checking. That said, according to the needs of the user, you can let CS3 available.

  Bob

• I entered the wrong names for servers on my windows mail how to change them and what are the good names

  I was installing windows mail thinking I was to catch up with the names for them (George and Sam)

  On behalf of email configuration, you don't "make things upward. All information must be accurate and approved by your ISP.
  You must as a result of your Internet Service Provider (ISP)...
  Your user name
  Your E-mail address
  Your password
  Name of the incoming server
  The name of the outgoing server

  After graduating from those, ask if the person can help you set up the email account. Once I got a new ISP and I also need help to connect to the wireless connection. I gave permission to access my computer remotely, and the person has had enough to set everything to me.
  If this is not possible, ask if there is a site that can teach you how to set up the account.

  OR, you can use this tutorial...

  Windows Mail: Setting up an account of end-to-end
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-mail-setting-up-an-account-from-start-to-finish

• How to download my photo as the user's windows picture, how do I add my profile in the OS as an administrator

  How to download my photo as the user's windows picture, how to add my profile in windows OS (vista, xp, win98se) as an administrator windows/PC?

  Hello

  You can choose an image that will be associated with your user account and shown on screens or menus that display your user name, such as the home screen or the start menu.

  Follow the steps in the article mentioned below:

  Windows Vista: http://windows.microsoft.com/en-US/windows-vista/Choose-a-picture-for-your-user-account-and-Start-menu

  Windows XP: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/ua_picture_change_w.mspx?mfr=true

• Windows 7 Home premium network problem, computers can access the internet, but they do not see each other on the network

  I was trying to set up a homegroup on my main computer, but on the second computer, I never had the opportunity to join the homegroup. I'm sure that I have everything set up properly, but I can't get the second computer to join.

  I have a switch that my internet runs and a cat cable goes to each computer. Each computer can access the internet without any problem, but none appear in other network list. They have the same name of working group, I just can't understand it. I use Windows Firewall.

  Any help would be greatly appreciated.

  Maybe this can help.

  ----------------------

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ------------------------------

  If your network consists only of Win 7 and you want a simple network, use it.

  http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup

  After you have configured the homegroup, scroll to the bottom for the Permission/security section.

  -----------------------------

  Win 7 networking with other version of Windows as a work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have authorization and security problems, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  ---------------------

  *** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• I am due delivery of a new computer week next to replace my current. How to re-install Adobe CC on the new computer?

  My old computer is replaced and I want to just make sure I can easily re - install Adobe CC on the new computer and it charges me a second monthly subscription. Please can you let me know how to go on this issue.

  Thank you very much

  Roger, he does not ask for payment that your subscription is linked to your Adobe ID after have connected you to Creative Cloud Desktop app, you would be able to install applications.

• How do you install 13 items after the download?

  After downloading how do you install the 13 elements?

  You need to download two files for windows. The second is an exe file that you then double-click to start the installation process

• In windows 7, how to make firefox automatically starts when the computer is turned on

  In Windows 7, how to make Firefox starts automatically when I turn on the computer. Note, I ask how to do this with Windows 7, xp, not vista.

  You place a shortcut to open Firefox in the start menu > programs > startup folder.
  
  It is essentially the same in all versions of Windows.