Windows updates not more

Similar Questions

• My Windows Update not more? My software update did not work for months?

  My Windows Update is not more?  My software update did not work for months ?

  Hi Jacc,

  1. What is the question you are faced with Windows updates?

  2. you get any error message?

  3. you are facing problems during updates or install updates?

  4. what software update you speak?

  5 have had any changes made to the computer before the show?

  Please follow the steps from the link and check that it works very well.

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997/en-us

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

• Updated Windows Update not installed error codes

  updates not enstalled, click try again, but got blah same results

  And the operating system of mystery?

  You receive errors related to updates?

  1. open Windows Update by clicking the Start button, all programs and then click Windows Update.
  2. in the left pane, click view update history.
  3. find an update for Windows that has failed to install, and then double-click the update to view more information.
  Updates that have failed to install will display failed under status, next to the name of update.
  4. in the Windows Update dialog box, next to the details of the error, review the error code for the update has failed.
  5. click on the links in the dialog box Windows Update under more information or help and Support to try to solve the problem, then try to reinstall updates by using Windows Update in Control Panel or by mail with the error code and maybe someone may be able to help others.

  Suggestion:

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• some windows updates not always settle. why it is so?

  some windows updates not always settle. Here are the updates that are not always.

  Update of security for Microsoft Office Publisher 2003 (KB2284695)
  Update for the filter of junk e-mail in Outlook 2003 (KB2466074)
  Update of security for Microsoft Office 2003 (KB2289163)
  Update for Microsoft Office Outlook 2003 (KB2449798)

  I don't know why not install microsoft office updates. Maybe because we use cracked versions of office. I think that these updates will not fail if we use a saved version of office 2003. is it so?.

  First thing I would do is to remove the cracked versions and then make a broad analysis AV with malwarebytes and other utilities of the VA, not to say what other little hidden surprise, that you got for free.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Windows updates not working do not AT ALL

  Five days ago, that I had to reinstall the Vista operating system. When I tried to install Microsoft office, I discovered that I need Vista SP1.  That's when I realized that all the attempts over the past five days updates had 'no.'  In the last hour, I worked with Microsoft technology by CAT on this issue and were made to do a scan of the sfc. Sfc scan window told me that I had a system repair pending that requires a reboot. I did the reset, but the sfc scan keeps giving the same message. I don't know if this is related to the inability of my computer up to date. (This all came trying to install Microsoft Office, which requires Vista SP1. Reinstall drive was apparently without SP1.  Any ideas?   (I just spent more than 25 hours get 2 rootkit virus diagnosed and removed - so the need to reinstall my operating system)

  Hello

  ·         Was there no error message or error code where it says that facilities, updates have failed?

  Method 1:

  You can try to put the computer in a clean boot state and try to install the updates and check if the third-party application interferes with the installation process. To configure your computer to clean boot follow the link below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.

  Method 2:

  If this does not help, you can try to reset the component of Windows Update and check if it helps to update the computer.

  http://support.Microsoft.com/kb/971058

  Method 3:

  You can also run the tool system the below data article and check if this is useful to solve the problem.

  http://support.Microsoft.com/kb/947821

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Update not working do not Error Message and Windows Defender cannot update Error Message definitions

  I have a laptop Dell 1501 with Vista Home Basic 32-bit.

  I ran CA 2010 Security Suite and you have scanned for Malware with regard to the Windows Update Error Message. He found none. I ran Microsoft Malware malicious tool, and it found. I ran Windows Defender and he found. I don't have CA and Windows Firewall to protect my computer and I have disabled both in trying to solve this problem of Windows Update and Windows Defender.

  I got this error 4 days ago. Here is what I tried:

  -I went on various Web sites, including Microsoft Support - and tried to solve the problem through services.msc and msconfig.exe. None worked.

  -J' noticed in msconfig. where it says start waiting next to Windows Update. There are 3-4 elements, which are affiliated to Windows Update and made sure they did not exist in the registry.

  -J' have to ensure that they were supposed to be automatic or manual under services.msc.

  -J' rebooted several times and nothing changes.

  Windows Defender does not update the definitions, and I do not know if this coincides with the release of Windows does not.

  I am at my wit's end and do not want to crash and burn my computer.

  I need serious help. Please, I beg you!

  Thank you.

  LRR100

  I had to call Microsoft. Alex tried to add registry keys and input upgrade.

  My Windows Update has almost been altered. It could be my mistake or it has become corrupted when running other services at the same time.

  I was sent a Windows 7 Home Premium Disc to upgrade and start over, as my Vista disk was corrupted as well.

  I would not recommend trying one of the suggestions listed on other sites. It's my personal opinion because I have in the past and it worsened my problem.

  I also wouldn't delete all programs (unless absolutely necessary) because I remove 4 MSMXL and he made their work more difficult.

  ________________________________________________________________________________________________________________________________

  Sometimes the only solution is to call Microsoft and they will evaluate if a charge of telephone support is necessary from the outset, before they run for your problem.

  Despite what you may have read, Microsoft Technical Support technicians are very efficient and kind.

  We inform you to open a slot during your day or even open your day for the problem to be solved.

  Mine took 2 1/2 hours, and they had to remind me the next day to make the order for the disk because it could not be done the same day.

  The more patient and kind you are, the best representative.

  Hope this helps and thanks for reading,.

  LRR100

• Windows updates not installing - is Norton 360 program defining the problem?

  I have to many Windows updates that have failed.  I looked but have not calculated what I might need to change settings using Norton 360 to allow updates.  The PC security is set on a received updates from Windows, but it is not the case.  Any help is appreciated.
  

  Hello

  Do you get any error messages?

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Windows updates not working not - code error 0xC800042D whenever I try

  When I try to update I get error Code: 0xC800042D - I was able to do some updates, but now it gives me this error code every time.  I'm not a computer expert - I just want to update.  I use the feature Microsoft Fixit and he "fixed" the problem but still get the same error message.  What should I do to get the updates short of hiring a "programmer/geek-type of person" to reorganize my computer? I have no further details - simply put: How do the Windows updates to rework?

  Hello

  1. What is the name of Microsoft Fixit are you referring to?
  2. Are you aware of any recent hardware or software on the computer changes before this problem?
  3. You are able to access the Internet?

  Try the method provided in the article below and check after each method:

  Temporary connection error may occur when you use Windows Update or Microsoft Update: http://support.Microsoft.com/kb/836941

  Warning to disable the Antivirus: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Warning to disable Firewall: You should not turn off Windows Firewall unless you have another firewall is enabled. Turning off Windows Firewall may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.

  Note: once you have completed the steps, make sure that you turn on the firewall and reactivate the antivirus in order to avoid the risk of infection by the virus.

  It will be useful.

• Windows updates not working do not!

  I spent hours today trying to determine why my computer had not agreed to updates in the last week and a half. A couple of support Tech has made several changes on my computer with no luck. I made an attempt more tonight and learned that a technician informed me there is a problem of Engineering where updates are not dating success on Win 7 and Vista. Is anyone else aware of the same? That would explain the stalemate I get when I try to download.

  Please run the Windows Update Troubleshooter:
  http://go.Microsoft.com/fwlink/?LinkId=231149

  Please provide the exact details of any problem it reports as not fixed.

  Restart your computer and wait 20 minutes for the system to operate before you download information. When the review much, not Event Viewer log files all problems show in the period immediately after the computer has booted.

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode. If the report is in one language other than English, please indicate the language.

  Please download and share with everyone a new copy of your log System of your event viewer on your disc one and post a link here. It allows to avoid confusion if you delete all previous copies of the log files of your OneDrive.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:

  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

• Windows Update not update - have almost tried everything. Time to re - install windows 8?

  Hello

  Recently, I needed to upgrade my computer to microsoft .net framework 4.6 for a programme of work. I decided that I have also download and install all windows updates at this time as well. When I run windows update, it downloads and installs them. Then I restart my pc like he wants me, and he says it configures the changes to my pc. Around 95 percent, he says that he has failed to set up changes to my pc and said that now it is up to them. I tried almost all the solutions on the internet to do this, including:

  Run the tool for troubleshooting Windows Update (the two that included in windows and one located on the forums here, which is supposed to do more things)

  the pc running in clean boot mode

  removal of the download files stored for windows update (suggested by another Web site)

  renamed the folder c:\Windows\SoftwareDistribution softwaredistribution.old, that was suggested on this forum

  manually reset the windows update components by opening an elevated command prompt and start/stop bits and wuauserv, appidsvc cryptsvc

  Open a command prompt and running /sfc scannow (it found problems, but has been unable to remedy)

  Open command prompt and used DISM cleaner to repair corrupt files (initially it was not able to repair the corrupted files, however, I did something suggested by another site (I forgot what I did) and then I re-directed command prompt and it said it fixed corrupted files successfully.)

  Despite all these tent, I always get errors. When I run the windows update troubleshooting, the program says that I had this problem but was able to fix it, but whenever I run the troubleshooter it tells me that it has set:

  Windows Update error 0 x 80070490(2016-05-19-T-07_19_40P)

  In addition, when I ran the prompt DISM, files at the beginning, she was unable to fix, but then he said that he set the second test are called:

  Cannot repair the military record [l:36 {18}] "Amd64\CNBJ2530. PBO"prncacla.inf, Version = 6.2.9200.16430, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), the Culture neutral, VersionScope is 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24 {12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
  2016-05-19 03:16:03, info CSI 00000425 [SR] cannot repair the military record [l:36 {18}] "Amd64\CNBJ2530. PBO"prncacla.inf, Version = 6.2.9200.16430, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), the Culture neutral, VersionScope is 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24 {12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
  2016-05-19 03:16:03, info CSI 00000426 [SR] this element is referenced by [l:164 {82}] "' Package_86_for_KB2769165 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.2.1.0.2769165 - 12166_neutral_GDR" "

  And (this file is similar, but it appears two times in the text of sfc connects, so I figure I should include):

  [RS] Cannot repair the military record [l:36 {18}] "Amd64\CNBJ2530. PBO"prncacla.inf, Version = 6.2.9200.16430, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), the Culture neutral, VersionScope is 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24 {12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
  2016-05-19 03:21:50, 000006f2 CSI Info [SR] cannot repair the military record [l:36 {18}] "Amd64\CNBJ2530. PBO"prncacla.inf, Version = 6.2.9200.16430, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), the Culture neutral, VersionScope is 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24 {12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
  2016-05-19 03:21:50, 000006f3 CSI Info [SR] this element is referenced by [l:164 {82}] "' Package_86_for_KB2769165 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.2.1.0.2769165 - 12166_neutral_GDR" "

  Of course, I tried just about everything that has been suggested. The only thing I can think to do now is to try to upgrade to windows 10 and if all goes well get rid of this problem, either uninstall windows and then reinstall it 8.

  Another option that someone suggested is to delete my current profile from microsoft on my pc and then create a new one, so get rid of all the corrupt files. thoughts?

  Someone else mentioned that interested to download either the microsoft update agent, which is on another part of this forum, or to download the preparation tool to update microsoft on this forum as well. Thoughts?

  Any help on this issue would be greatly appreciated, thanks!

  -UPDATE

  I went to the microsoft update catalog and downloaded and installed every single update manually. I restarted my pc and set it up correctly and everything seems to be okay. I just downloaded microsoft .net framework 4.6.1 and installed successfully. I am now able to run the program that launched me into this adventure (Manager of nexus mod) together. So anyone out there with this same problem, my advice to you is to search microsoft update catalog in internet explore (it only works with google chrome), type the numbers after the "kb" for each update and then manually download and install updates and then reboot your pc. Good luck to you all.

• 8 blocked to 13%/Will Windows Update not load any OS

  I have recently upgraded to Windows 8 on a Lenovo ThinkCentre PC.  Three days later, when I finally had the chance to explore the operating system, the PC suddenly warns me that it stops to install updates.  Let him install the update but it is stuck at 13%.  During the six hours of waiting, I noticed that the PC keeps restarting once every 30 minutes.  At this point I because the office and try to start it in Mode safe mode (SHIFT + F8).  Safe mode seems to work and I then reconnect to check for problems in Windows.  I was told that the driver sound or anti-virus can be the question so I uninstalled my antivirus.  Before that I could finish the uninstall, Windows starts once more to close the programs and stop them.  He tells me to "Please wait while it installs the updates... "I never had a warning or anything like that.

  So my PC restarts and bring back me to the same screen.  It increments to 13% and stops.  I wait another 2 hours before the powerfailing again.  Ms tells me that I may need update my PC and explains how to do this.  When I get to the screen to refresh my PC and select the option, my PC just freezes and does nothing for a few hours.  At this point, it is almost an entire day just trying to install an update.  After a few hours, my PC restarts and lead me to a screen that says "auto repair failed" and it gives me 2 options: Shut Down or Advanced Options.  When I choose advance options, it brings back me to the same screen that I was at the front where I can refresh, reset, or stop.  No matter which I select, it freezes and resets after a few hours to a black screen with a blue Windows logo and a ring of spinning of points.
  Seeing that something is really wrong, I disconnect my external backup to ensure that the information I have (library of music family photos/set) is correct.  I plug my external laptop and to my horror EVERY SINGLE ONE of my files has a generic icon (white sheet of paper) that does not open!  None of my MP3 or JPEG files opens.  I unplug the external and that someone else plug it into their PC and now I have NO file.  They can see from the outside and move files in there very well, but it's almost like my drive has been corrupted and then reformatted.  If at this point, I lost my full backup with all my information (family photos, music library, database of KeePass, a few years worth of .pst files, etc..)
  I spend the next two days speaking with Microsoft and they come to the conclusion that my data was lost (both on my external hard drives and desktop) and I need to re - install Windows 8.  I put the DVD in the drive and choose to start using the DVD.  Nothing.  It brings back me to the exact same screen with blue Windows logo.  Remotes tech in my laptop and check the disc and everything seems in good condition.  Try us again and it always brings back me to the same screen.  At that time, it downloads Windows 7 and advises that we put on that return.  After 3 hours (close), it finally downloads and it puts it on my USB.  I select the USB to boot after the PC is powerfailed.  It gives me the message: could not load the operating system.
  So, at this point, I lost ALL my data and my desktop PC was essentially bricked since 5 days with absolutely no resolution.  Office worked very well during the past year with Windows 7, but Windows 8 days and even I can't use it.  Microsoft says have absolutely no knowledge of the same question if their own forums and full of people have the same problem with the update.
  I am looking for help with a problem that caused Windows 8.  The situation is becoming worse than Win98 and Vista!  I lost almost a week with Microsoft technicians to tell me that it is a problem with "my system".  Really?  Well well... my system was working fine until I was stupid enough to put Windows 8 on it.
  Ranting side... Help, please!  I lost everything this week and I'm looking to rebuild.

  Hello, DefaultUserOne,

  Try the solutions listed here:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_update/Windows-Update-on-Windows-8-not-working-stuck-at/dc22f534-be29-45CB-ad4e-c7803c7feeb4

• Client Windows Update not found with error 0 x 80070490

  Since December 18, 2010 windows update fails on my DellLatitudeD630 under Vista ULTIMATE SP2.
  Tried many methods suggested on various web sites:
  Installation via the Vista DVD update: result: update greyed... no upgrade needed

  Services related to Windows Update, re-registers restarted .dll files services: no change

  Cleaned the permissions using the subinacl script posted on the web: no change

  Tried to install WindowsUpdateAgent30 - x 86 .exe, Setup stops with the Agent installation program Windows Update has encountered an unrecoverable error (but I was not able to understand what goes wrong).

  Anyway, I tried what I could and would be very happy if one of you could tell me a method that works.

  Thanks in advance,

  C.

  Unfortunately, the only options are really "upgrade on the spot or reinstallation of the operating system".

  K TaurArian [MVP] 2005-2010 - Update Services

• Client Windows Update not found with error 0x80072efe.

  After trying a few update solutions, still cannot update my Windows Vista Home premium.

  ----------------------------------------------------------------------------

  To THE: search updates [CallId = {99E90203-6E7E-48FF-B9F0-434086CD2147}]
  2010-06-11 09:00:12:727 1956 113 c to THE #.
  2010-06-11 09:00:12:729 1956 113 c to THE setting next detection timeout at 2010-06-11 12:00:12
  2010-06-11 09:00:12:729 1956 113 c time of installation to THE adjustment to THE planned at 2010-06-12 01:00
  2010-06-11 09:00:17:726 1956 d88 report REPORT EVENT: 09:00:12:725 2010-06-11 + 0200 1 148 101 {B0A8E80E-6F0D-4000-8775-D52B6B945499} {00000000-0000-0000-0000-000000000000} 0 80072efe AutomaticUpdates outage software to sync Windows Update Client did not detect with error 0x80072efe.
  2010-06-11 09:00:17:743 1956 d88 report CWERReporter::HandleEvents - WER report upload completed with status 0 x 8
  2010-06-11 09:00:17:743 1956 d88 WER sent report: 7.4.7600.226 0x80072efe 00000000-0000-0000-0000-000000000000 Scan 101 unmanaged
  2010-06-11 09:00:17:743 1956 d88 report CWERReporter finish event management. (00000000)

  I was able to update windows or windows defender and my sytem restore was kapput too :(

  solved the problem with Kaspersky tdss killer... found here: download and scan can heal everything what he finds.

  http://downloads.PHPNuke.org/en/download-item-view-m-g-n-m-z/Kaspersky%2BTDSSKILLER.htm

  Good luck!!

• Windows Update not available on my xp home edition. Also no pgedit and bits do not work.

  "windows update is not available" for my xp Home Edition.  I followed the instructions to fix and found that I had no gpedit.  Also said something about BITS works do not.  I don't have my recovery disks.  I care not one of my files.  I want just a fresh install of xp.  I tried microsoft fix it but no good.  I tried to change the recommended registry but nothing.  I need to have regular updates for my xp system.

  [1] I got a really nice, totally authentic Dell with XP home Edition with product information and all that.  My problem is that he had suffered some nasty virus that makes it unusable or at least the inheritee.

  [2] the recovery discs can be acquired from the source, i.e. of Dell

  A1. You should have to do a clean install when you inherited the computer. Since you have not, it's yet another reason to do it now.

  A2. If a set of disks came with the computer, there is a hidden partition restore (not to be confused with the restoration of the system) you would use to do a clean install (in Dell-speak, a "destructive recovery"). You will find information about this in the Dell Support Web site (e.g., http://support.dell.com/support/topics/global.aspx/support/dsn/en/document?c=us&l=en&s=dhs&docid=181316).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows Update not working not at all, error 0 x 80246008

  XP SP3 will not update get error code 0 x for all attempts to updatess 80246008.  How can I get the update working again? I currently have 47 pending updaates which will be no tload.

  0 x 80246008
  WU_E_DM_FAILTOCONNECTTOBITS

  A download manager operation failed because the download manager could not connect (BITS) Background Intelligent Transfer Service.

  Did you try this?

  You can restart your computer, then use the steps below and check, if it solves problems-

  You receive an error message "the necessary services are disabled or unavailable" when you connect to the Microsoft Windows Update Web site or the Microsoft Update Web site

  http://support.Microsoft.com/kb/883822>

  `~`

  Reset

  You receive an error message when you try to download the updates on the Windows Update Web site or the Microsoft Update Web site, or when you try to start 0 Background Intelligent Transfer Service x 80246008

  http://support.Microsoft.com/kb/916251>

  `~`

  You may receive an error message that contains the "0x8DDD0018" code or the code '0 x 80246008' when you try to download the updates on the Microsoft Windows Update Web site or the Microsoft Update Web site

  http://support.Microsoft.com/?kbid=910337>

  `~`

  Restart one last time then test by launching a manual check of updates & see if the
  updates to install now.

  `~`

  The time and date of this moment in British Colombia, Canada is 07:55
  Sunday, March 30, 2014
  The time Pacific daylight time (PDT)-0700 UTC

  UTC/GMT is 14:55 on Sunday, March 30, 2014

  Current weather conditions in Vancouver

  Mainly cloudy 43 ° F / 6 ° C