Windows Vista and XP dual boot

Similar Questions

• Windows 8 and the dual boot XP

  I have Windows 8 is installed on my PC (Athlon, 2 GB of RAM) and want to install Windows XP too due to a need. If I install Windows xp, would windows 8 destroyed as in 7 that he did?
  Any help woud greatly appreciated.

  Forget the drivers and all that... just a simple question "would win 8 work or not after installing XP?

  Nope.

  What follows refers to Windows 7, but the same principles apply to Windows 8:

  The following instructions will show how dual boot Windows 7 and XP on your machine instead of replacing one with the other.

   

  It is important that you have a reinstall or repair disk in case you should reinstall or repair your installation of WIndows 8.

  The following article will show you how to create a repair disk (Windows 7, the same instructions for Windows 8 references):

  http://notebooks.com/2011/02/09/how-to-create-a-system-repair-disc-in-Windows-7/

   

   

  Drivers for Windows XP:

   

  You first need to know if your computer is compatible with Windows XP. Much more modern computers are gradually support for Windows XP.

   

  Create Partition

  Open a command run (press Windows + R key) on your keyboard. Then type diskmgmt.msc, and then press enter on your keyboard.

  Once the disk management is open, select the C:\ or where Windows 8 is installed.

  Right click and click on the retractable menu.

  Please wait while Windows 8 checks the available space on the disc.

  Enter the amount you want to assign.

  Click OK.

  The disk management window should display the unallocated disk space.

  --------------------------------------------

   

  Install Windows XP

  In order to install Windows XP on the partition you created, you will need to boot into your BIOS, then set it to IDE HDD mode.

  --------------------------------------------

  After you set the IDE HDD mode, you can continue to install Windows XP on the partition you created;

  Insert your Windows XP CD, and then restart your computer.

  When you are prompted to boot from the CD, do so. To do this, press any key on the keyboard.

  Windows XP will go into its configuration process.

  Once you arrive at the welcome configuration, press enter on your keyboard to start the installation process

  Press F8 on your keyboard to accept the license agreement

  Select partition

  Select Format the partition using the NTFS file system

  Press F on your keyboard to start the formatting.

  Installation files will now be copied to your hard drive

  Your system will be rebooted, the installation of Windows XP will continue

  ----------------------------------------------

   

  After Windows XP installs successfully, you will not be able to boot in Windows 8, here comes the recovery for Windows 8 disc.

  Boot from the DVD Windows 8

  (a) in the screen install now

  (b) click on repair your computer

  (c) click on Advanced Options

  (d) click on troubleshoot

  (e) click on startup repair

  (f) follow the instructions on the screen

  --------------------------------------------

  After you have repaired your installation Windows 8 and try to start it, you will notice that Windows 8 will not start.

  Boot into the BIOS again and choose the SATA hard drive mode. You will now be able to start Windows 8 again.

  -------------------------------------------

  After that, download EasyBCD and add a startup for Windows XP for Windows 8 boot manager entry;

  EasyBCD by NeoSmart Technologies would be your answer, it provides a graphical front-end to the BCDEdit Command line that makes it easy for you to set the boot settings and change the entries start on the new Windowsboot Manager. http://NeoSmart.NET/DL.php?id=1

  ------------------------------------------

  The next step is now make it possible for Windows 8 start in IDE mode.

  Here are the instructions to do this:

  http://www.Vistax64.com/general-discussion/271218-switch-AHCI-IDE-tutorial-HOWTO.html

  Welcome to all, so let me explain, I installed Windows 8 with AHCI set from the Bios, but after that I wanted to use ide (becose it starts faster) and when I put Ide from Bios, windows 7 loading screan camed upp and BSOD (blue screen of death) with a 0x0000005B error code, I tried the regedit setting thing in the 'HKEY_LOCAL_MACHINESystemCurrentControlSetServicesMsahci' and then just pan the STARTING value 0 I have set it to 1 and it supposed to work, but it was a location, he always did the Bsod and I was so angry, I wanted to make it work... AND I DID IT!

  Here's the pases:
  (1) I assume that you have installed Windows Vista or Windows 8 with AHCI in the BIOS!
  Download 2) my registry fix (to add keys to the ide to regeditor) simply apply the key
  (3) now manually part regedit go to:

  HKEY_LOCAL_MACHINE_System_CurrentControlSet_Services_Msahci
  HKEY_LOCAL_MACHINE_System_CurrentControlSet_Services_iaStor
  HKEY_LOCAL_MACHINE_System_CurrentControlSet_Services_iaStorV

  And thease three keys in the right pan, you will find a key named 'START' change all three (Msahci, iaStor, iaStorV) values from 0 to 1
  Now, go to HKEY_LOCAL_MACHINE_System_CurrentControlSet_Services_PciIde
  , and then change the value of start on '0 '.

  (4) now that you're allmost done, restart your laptop computer and go to Bios and set between AHCI and IDE! Save the settings in the Bios and restart

  (5) Windows will be loading and VOILA! NO BSOD! , windows Vista / seven will install new Ide drivers and that you will see in the windows Device Manager you have more AHCI drivers, you have the Ide drivers!
  (6), he is invited to restart another, just restart and you will be happy

• Windows 7 and 8 dual boot

  Hi, I receive a TouchSmart from HP Envy 15-j023sa for Christmas. http://www.johnlewis.com/hp-envy-touchsmart-15-j023sa-laptop-intel-core-i5-4gb-ram-1tb-15-6-touch-sc....

  If I had to choose between Windows 7 and 8, I would prefer 8 to the Appstore, and with the laptop's touch and be impressed with Windows 8, when I tried it. I've been thinking to dual boot Windows 7 and 8 on the laptop, as I have a few games that is not compatible with Windows 8. I understand that the old operating system must be installed first.

  The best sollution would be to upgrade to Windows 7, a copy of Windows 8 and install it on a different partition or y at - it an easy sollution? And will it affect my warranty of 3 years? I would also like to ask quickly on Ubuntu. I find myself probably won't install on this machine that I've read about the compatibility issues with Windows 8, but will it affect my warranty should I choose to do?

  Hello

  Please try the following tutorials:

  http://www.Lifehacker.com.au/2011/09/how-to-dual-boot-Windows-7-and-Windows-8-side-by-side/

  http://www.ComputerShopper.com/feature/guide-how-to-dual-boot-Windows-8-and-Windows-7

  http://www.PCMag.com/Article2/0, 2817,2408280,00.asp

  Good luck.

• Install windows 7 in Envy DV7-7234 with Windows 8 with win7 dual boot and windows 8

  I can install windows 7 in Envy DV7-7234 with Windows 8 buth with dual boot: win7 and windows 8?

  Installing Windows 7 on your HP ENVY computer Notebook dv7-7234nr is not supported by HP. In addition, no Windows 7 driver is listed on HP Software and Driver Downloads page for your computer.

  HP does not recommend installing Windows 7 and it will support the installation of Windows 7 on a computer comes with Windows 8. HP doesn't provide drivers for Windows 7 and the appropriate drivers are not available for the hardware in the computer. In addition, Windows 7 can not support some of the hardware or software designed for the computer.

  Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.

  You will need to DISABLE 'Secure Boot' and ENABLE 'Legacy Support' in the ' settings of BIOS ' settings below page;

  

  Then, start Windows 8 and run the console 'disk management '. Using "Shrink Volume", reducing the size of the "C:" partition about half of its original size. Name of the partition "C:" to something like "Windows 8". Now, start the computer from the Windows 7 DVD, making sure to select "UEFI - internal CD/DVD" or "UEFI - ATAPI CD/DVD ' and not ' Legacy - CD/DVD internal."  (I recommend using a disc of Windows 7 SP1latest drivers have been included in this topic. The use of the SP1 disc usually resolves most disk hard AF and other issues. )

  Install Windows 7 on the partition without label that was established earlier when you shrunk the partition "C:". Continue to install WIndows 7 by / responding to all the guests. Once you download Windows 7 on your computer, we have to track down the compatible drivers for it. Please list all the "hardware ID" for unknown or missing devices.

  Please send Bravo

• Using Windows Vista and IE9. Computer is very slow.

  My system is installed with windows vista and using the Explorer 9. My syster is very slow. How can you help me?

  Original title: my system is installed with windows vista and using the Explorer 9. My syster is very slow. How can you help me?

  Hello

  See if this helps you:

  Search for malware, if necessary using the safe mode with networking.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Update drivers:

  Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  "Optimize Windows for better performance.

  http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  It would be a good idea to run the System File Checker tool to see if you have corrupted files

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  If SFC detects serious flaws, you may need to perform a repair upgrade Installation or relocation complete if you don't have a Vista DVD from Microsoft.

  If you can borrow a DVD of Vista from Microsoft you save doing a reinstall full:

  "How to perform a repair for Vista Installation"

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  See you soon.

• Windows vista and explore unresponsive

  Windows vista and explore unresponsive

  Try a clean boot, or boot into safe mode.  The behavior persists?

  Consider using Sysinternals Autoruns or ShellExView. Disable Add-ons and non Microsoft shell extensions and verify the behavior.  If he went, reactivate the disabled extensions/add-ons, one at a time and see if you can identify who may be liable.

• I have windows vista and when I click on a shortcut on the desktop I have a pop up asking what file to open it with. In order to open the file I find the actuall file.

  Original title: registry exe problem

  I have windows vista and when I click on a shortcut on the desktop I have a pop up asking what file to open it with. In order to open the file I find the actuall file. This also occurs when you download the software, which makes it difficult, because the file is not on the pc yet. All solutions?

  Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

  Microsoft has suggestions and offerings to

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  Moderator Forum Keith has a few suggestions along this line to

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

  You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type sfc in the search box, right-click to SFC. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

  Finally if all else fails, you can look at the rather cryptic system event log. To make, click Start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

  I hope this helps. Good luck.

• my computer is Windows vista and installed microsoft Office Professional 2010 academic

  my computer is Windows vista and installed microsoft Office Professional 2010 academic.  However when I open the program it gives me an error message such as: the application failed to start because its side-by-side configuration is incorrect...  Check the log of events applications for more details.

  Hello

  1. not the problem only occurs when opening Microsoft Office or with all applications?

  2. I suggest you to install Microsoft Visual C++ 2008 and check if it helps.

  Step 1: Install the Microsoft Visual C++ 2008.

  Follow the link to download and install the Microsoft Visual C++ 2008.

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=29 (for 32-bit)

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=15336 (for 64 bit)

  Step 2: Perform a clean boot

  Follow the steps in the link below to perform the clean boot.

  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 7 in the link to your computer in normal mode.

  It will be useful.

• I use Windows Vista and that you need to download SQL Server 2005 Express Service Pack 4. I get an error code of 64 C. Please tell me what to do?

  I use Windows Vista and that you need to download SQL Server 2005 Express Service Pack 4. I get an error code 64 C help, please.

  Hello

  I suggest you to try the steps below and check if it helps.

  Method 1: Try to reset components to update Windows from the following link, which would help you to install the updates of windows. http://support.Microsoft.com/kb/971058

  Method 2: If the problem persists, then try to set up your computer in a clean boot state, and check to see if the same problem happens.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 3: Also try to install the updates manually from the link below.

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=184

  You can also consult the following link for more information:

  Troubleshoot problems with installing updates.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Hope this information is useful.

• Can someone help me? I have a dell windows vista and the cd/dvd drive won't work correctly. Whenever I have insert a cd/dvd, it takes forever to read, and it ejects itself. Why?

  Can someone help me? I have a dell windows vista and the cd/dvd drive won't work correctly. Whenever I have insert a cd/dvd, it takes forever to read, and it ejects itself. Why?

  Hello

  Detect and automatically fix problems of CD/DVD
  http://support.Dell.com/support/topics/global.aspx/support/DSN/document?c=us&l=en&s=Gen&docid=56A1F87CD8895B0EE040AE0AB7E15FFC

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Failure of Windows Vista and the SafeMode of startup failure - crcdisk.sys

  Hello

  I have a Dell Inspiron laptop computer 2 GB RAM. He had a few months now, and everything has been fine.

  Started a few days ago from freezing occasionally so I was forced to restart. CTRL + ALT + DELETE has refused to do anything and so I had to manually remove the battery.

  A frozen about three times and then once rebooted showed the BSOD saying something the system failure.

  So I rebooted once more and now it restarts just without going on the login screen. I tried to run in safe mode, but it gets stuck on crcdisk.sys or goes in an endless process to restart again.

  Is there anyway that I might be able to get back on without doing a full factory reset, as I have all my work stored on the hard drive integrated without backup.

  I can open the system recovery options, but none of these options seem to work. All my points of recovery have been removed.

  Startup Repair doesn't indicate a problem with the system, so I thought maybe it was a virus? The same thing happened to my wife a few days ago computer and that uses the same Wifi network as me.

  Jacob.

  To search for malicious software, you must do in Mode safe mode with networking, but you say that you can not get the Options.

  There is information below data recovery.

  And Startup Repair Info, too.

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If Safe Mode does not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Dell recovery options:

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is Dell to reinstall Vista from the DVD on your computer.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  And that way if you have a recovery partition on your hard drive.

  See you soon

  Mick Murphy - Microsoft partner

• Windows vista service pack 2 [BOOT ERROR! Oxc0190036 1187/59291 (Faultrep.dll)]

  Help, please!

  I use a sony viao laptop AR71M with windows vista home premium. I tried to update on windows service pack 2 panoramas, but get a boot error after installation
  !! Oxc0190036 1187/59291 (Faultrep.dll)
  I have tried everything I know, but it didn't budge. I had to restore my system several times so that I can continue to use my laptop.

  Hi DaveCole,

  I suggest you try the methods mentioned below and check if it helps.

  Method 1: Start Windows Vista with the Windows installation media, and then use the repair feature.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Method 2: Start the system in safe mode and then use the system restore feature.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 3: Follow the provided article.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  http://support.Microsoft.com/kb/947366

  Method 4: No detection system file checker (SFC).

  http://support.Microsoft.com/kb/929833

• Just reinstalled Windows 7 as a dual boot with linux ubuntu 11.04, however, used windows recognize my wireless network card.

  just reinstalled windows 7 as a dual boot with linux ubuntu 11.04, however, used windows recognizes my wlan card and does not allow me to scan for networks, absolutely no networks are displayed under networks. Help, please?

  original title: no wireless network

  That's your problem.  You will need to determine which makes your wireless card, go to their website and download the latest driver for 64-bit Windows 7 32 0r according to your material.  If its inbult to your computer, visit vender of your computer (HP, Toshiba, etc) for the correct driver.

  Jerry

• No sound in Windows 7 after installing dual boot Ubuntu (Sound Blaster Audigy)

  I recently put my Windows 7 system to dual-boot with Ubuntu 9.10.

  Now, Ubuntu will play audio through my Sound Blaster Audigy, but Windows 7 will not. I reinstalled all the drivers and installed correctly. I went through the troubleshooting Control Panel section; She didn't find any problem, but there is still no sound. When I play music, volume control shows that the audio is playing.

  I can only assume that there is a problem with the installation of Ubuntu, that seems odd, since BONES are on separate partitions on my hard drive. Like I said, Ubuntu played outside the Audigy with no problems.

  Meanwhile I use my onboard sound for Win7, but I'd love to get my audigy...

  Any ideas or suggestions are welcome.

  Nope checked all the possible power for audio setting in windows 7.  The only solution I found was disabling Audigy, plug in my onboard sound, allowing it and restart the computer.  On restart I could activate audigy, plug on it and activate the audigy player.  It was my only solution, but this is not going to work whenever I want to use ubuntu. No solution practice.

• I want to make my windows 7 pro laptop dual booting with fedora 8, I want windows 7 is compatible with fedora 8 _

  I want to make my windows 7 pro laptop dual booting with fedora 8, I want windows 7 is compatible with fedora 8

  I don't know what you mean "compatible". A BONE has nothing to do with each other. You can create a dual-boot with Fedora, of course.

  http://www.Google.com/#hl=en&source=HP&q=dual-boot+Fedora+and+Windows+7&AQ=0&AQI=G1&OQ=dual-boot+fed&FP=b36c7832dbb01be6 MS - MVP - Elephant Boy computers - don't panic!