Windows Server cannot access the folder
Windows Server 2008 R2 SP1 Standard, I have a folder that I created. I can access the folder if I go through the C:\ drive, but can't if I try UNC \\ServerName\ or \\IPAddress\ and receive a
Windows cannot access \\ServerName\...
You are not allowed to access \\ServerName\... Contact your network administrator to request access.
but when I check the permissions on the folder, I'm registered and received a control total change, read & execute, display the contents of the folder, read, write.
I need to be able to assign the UNC path to a database, and it is a failure because of this problem.
Anyone have any ideas?
QuestionBoy
You will need to create a new post on the TechNet forums for assistance with Windows Server:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer
Tags: Windows
Similar Questions
-
Hi Lisa! I have a similar problem, but I use Windows XP Home Edition. Under ' advanced settings (step 1 c) there is no area for "simple file sharing" for me check or uncheck. ". I have a directory under Documents and Settings of a former user who uses this PC is no longer, and the user account has been deleted. But I don't have access to the files in spite of being the only user and administrator. I can't access this grace at a command prompt. The folder name is too long, and the short name will not work. I tried right click directly on the folder, but not getting anything to work with. Uncheck "read only" does nothing, and when I look again, it is considered as 'read only' again. I can't delete the folder. I can't access the folder. Any help would be appreciated.
I'm not Lisa, but you can start the computer with Linux Livecd such as Knoppix or a Bart PE disk and copy the data from the file to an external hard drive in this way. You can then delete the folder if you use the Linux NTFS driver (if your Windows drive is formatted in NTFS; he did not need something special if it's FAT32) or just delete it using the Bart PE.
http://www.Knoppix.NET
http://www.nu2.nu/pebuilder/ - Bart PE Builder MS - MVP - Elephant Boy computers - Don ' t Panic! -
BI SampleAppFiles Server cannot access the correct file
Hello experts,
Part of my project is creation of KPIs for my clients. Before doing all this, I'm trying to create a KPI sample and see if it works well. It is using 11g (1.1.7).
Here's the problem: I created the sample KPI without problem; However, when I try to open the report I get an error that
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred. [nQSError: 43113] The message returned by OBIS. [nQSError: 64023] Cannot access the E:\BIHOME\instances\instance1\bifoundation\OracleBIServerComponent\coreapplication_obis1/sample/SampleAppFiles/Data/SAMP_REVENUE_A.xml: no such file or directory for table SAMP_REVENUE_A (HY000)
The path is correct, except instead (E:\), it should be (C:\). Does anyone know how to change this? Help, please.
I don't have a 'E' drive in my system. This forum works on windows
Help, please
Hello
In the sample OBIEE, you have a variable called BI_EE_HOME with this path
To change this, open your SPR (online mode) and then change repository variable BI_EE_HOME
We call this variable in your connection pool (you can change this path directly on the connection pool too)
Felipe Idalgo
-
system cannot access the folder
I have two files that appear to be unaccesible.
1. all users/Documents
2 Program Files/Microsoft Security customer... (created by my first installation of Security Essentials)
I don't know when the 'Documents' folder has become inaccessible, but the Client Security folder was withikng last week... It is not stopped Security Essentials to work, leading to a virus attack (AMSECURE), OR something else has stopped working and rendered virus attack it the inaccessible folder... (Don't know who)
I discovered the problem with the "Microsoft Security Client" folder, when I tried to re-installed Security Essentials, while recovering from the virus. Installation has failed every time. Once I discovered what the problem was, I was able to rename the folder 'Microsoft Security customer', so that the security essentials installation then ok...
I searched on the internet a solution to the issue of file access and nothing that I do allow me to access the records...
Both files are displayed as READ ONLY I change, but he returned immediately to READ ONLY. I started in safe MODE and checked the property and everything seems OK, too... all folders and files in the folder have assumed the same properties and are not accessible...
I finished a full disc and all check/scan that found a few bad sectors, it does not solve the problem...
I can't open the 'Documents' folder at all... However, I can open the "Microdoft Security Client" folder, but can't open the files it contains.
When I try to delete it, I get the meesage that a folder it contains is not empty... However, the top folder and the files it contains are all shown as "empty".
Thank you...
Thanks JW... He has solved a part of my question...
The folder users/document all is now available...
When I listed the attributes not copied... I added me to access FULL and low and behold, now I can access the folder...
HOWEVER... the folder 'Microsoft Security customer' (renamed to BADFOLDER), has 3 other folders that it contains...
Backup
Drivers
en - us
After you add me (Graham) and SYSTEM to the list of users with full access, using the *. * to all within the BADFOLDER has also been changed, I can not even open files...
The top folder (BADFOLDER) is to allow access, but I can't go further... When I try to open all subfolders I get "file are not accessible by the system"
CACLS folder name now produces
OFFICE/Graham:
F NT AUTHORITY\SYSTEM:
F Thank you
G........
-
Windows 7 cannot access the cliché in server 2003
Hello world:
I using windows 7 pro,my company has a server and version is windows server 2003,function of shadow copy are already active on the server.However, when I map the network drive to share the Server 2003 folder in my pc.I want to check the previous version on the network drive on my pc,but it does not show NO previous version available.When I using my PC to refuel, windows xp version checks the card reader.Well Yes, the previous version is show all.I was wondering why windows 7 cannot see any previous version?kindly help me, thank you very much!Hello
The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will support what ask you
http://social.technet.Microsoft.com/forums/en/category/WindowsServer/
-
When you try to access the user profile, get the error message "the service user profile Service has no logon. User profile cannot be loaded. "The new profile tried to go through the steps of profile user fix damaged by ms, but trying to create a new user profile to copy the files from the damaged user profile does not display on my C: drive the users folder (as it should). Anyway to fix the corrupted if user profile profile are available?
Hello
References to Vista also apply to Windows 7.
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
How to enable or disable the built-in Windows 7 Administrator account
http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.htmlUse the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
This allows clear of corruption. Do the same for other accounts if necessary after following the above message.You can use the hidden - administrator account to make another account as ADMINISTRATOR with password even
(or two with the same password) use a test or fix the other.You can run the Admin account hidden from the prompt by if necessary.
How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlWhat are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7How to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.htmlIf you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
-
Both have the latest upgrades of the operating system. Both are running the same version of MacAfee. He used to work without problems up to several weeks, there may be a problem of automatic update but I don't know. Disabled the two walls of fire, nothing works. Cable network Ehternet WORKGROUP. Windows 7 computer can access files through their prorgrams course that Thunderbird (save the attachment without problems) or previously network drive is available. Just Windows Explorer does not see the computer. As soon as I restart the Vista computer, it is visible in Windows Explorer. It's the computer Vista is a central workstation with others and inspires other users that connect at different times of the day that the central computer must be restarted for full access. XP-based computers do not have a problem and can access the files at any time. It is the only computer of Vita.
Hello
Follow these steps and check if that helps:
(a) open centre network and sharing by clicking the Start button, clicking Control Panel, clicking Network and Internet, click Network and sharing Center.
(b) click on the arrow next to public folder sharing, and then click one of the following options:
i. turn on sharing so anyone with network access can open files
II. turn on sharing so anyone with network access can open, change and create files
III. turn off sharing (people logged on to this computer can still access this folder)
(c) click on apply. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
Networking of computers running different versions of Windows
You can also read this article and check if this may help:
http://Windows.Microsoft.com/en-us/Windows-Vista/file-sharing-essentials
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-file-and-printer-sharing
http://Windows.Microsoft.com/en-us/Windows-Vista/share-files-with-someone
-
I have a desktop running Windows Vista Home basic and I can't connect to the internet through a local network, which is connected through a router (Belkin). Adapter type is Internet: Intel 825562V-210/100
After consultations with the support of technichal society of router and my PC vendor, it seems that there is aproblem with negotiating the link speed. Here are some symptoms:
I can access the internet if I connect the cable directly to the modem;
Connected through the router, I can sometimes connecting to the internet if Imaually change settings of connection speed (10 / 100 Mbps, half/full duplex)
All other PC connected to the network, using Win Vista and throuhg connected to the same router, have access to the network;
If I connect my network cable to another PC, it will have access to the internet;
The status of my PC seems to be 'connected' on the site of implementation of routers. The State of my connection is sometimes "Local only" sometimes "Local and Internet", but in fat, there is no internet access.
I tried the following:
Trouobleshooting under the direction of the technical support of the router and PC vendor.
Update the operating system to restore to an earlier date, to restore to the factory settings; Reformatting my PC 2 times, (first internet worked for a few hours only); update the OS (by connecting directly to the modem); Turning off Win Defender, removing software antivirus. Reset LAN connection...
Any suggestion please?
New router solved the problem.
Thanks a lot, especially Jack :-).
P.J.
-
Windows 8 cannot access the drive properties by right-clicking on a no C SATA or USB drive
Normally the drive properties are selected by right clicking the icon of the hard disk, which gives access to the use of storage and the Player options selected check disk. In Windows 8, I can get the properties of the disk on my C drive by right clicking, but not on any other drive. Right-clicking on any non C drive of the computer loses the office for about 10 seconds, then it returns, but never shows the drive properties window. Help, please! Thank you
Hello
Welcome to Microsoft, the best place for all your related queries windows community.
I see that you are unable to access the drive other than drive C Properties window.
I would like to suggest to run the command sfc/scannow because it is something related to the file system and check.
The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions. When the analysis is complete, the System File Checker tool indicates whether integrity violations were found. If integrity violations are detected, the System File Checker tool difficulty integrity violations.
Follow these steps to run sfc/scan.
a. press Windows + X and click/click on (Admin) command prompt.
b b.. in the elevated command prompt, type sfc/scannow , and then press enter.
NOTE: It can take some time to finish the race.
Let us know the results.
If you have other questions related to the properties of the disk, feel free to join us at any time. We're always here to help.
-
Cannot access the folder C:\ drive user
1. I have Windows 7.
2. I have a user folder with all my documents in there. Everything about this case insists that it can be found at C:\Users\MyName.
3. when I try to follow this path, there is no record to MyName. In C:\Users, he not only "invited" and "Public". It defies everything I know on the functioning of the paths of files.
I need to understand why this is and how to access My Documents by following the path C:\. Any suggestions?
Thank you.
Two things to try.
Sign in to your user account.
Click Start > your account (top right of the start menu)
Right-click on your Documents folder, click Properties, and then click on the location tab. See what he says.
If it says C:\Users\Yourname\Documents then try the following:
Open Windows Explorer, go to C:\Users.
In the toolbar, click on organize > folder and Search Options.
Click the view tab and scroll down the hidden files and folders.
Click on the box "show the hidden files and folders".
Click on apply and OK. Then show your user account?
-
Original title: I can't access my desktop icon to burn a dvd.
I can't access my desktop icon to burn a dvd. The message I get is as follows, "location: C:\Program Files\Common Program Files Central\Main\msvcr71.dll is not a valid windows image." Please check this against your installation diskette. "On my toolbar, it said,"mediahub.exe - bad image"can someone please help me as I've used in the past to burn CDs and DVDs. He moved with the computer. Thank you
Hello
1. have you done any hardware changes or software on your computer before this problem?
2 do you have a copy of Sonic application backup to reinstall it later?
I suggest you to uninstall Sonic since Add / Remove Programs. Subsequently, check if you are able to burn CDs in your computer.
Reference: burn your own custom CDsHope the helps of information.
-
Cannot access the folder pictures
System information:Windows Vista 32-bit, Business editionHP Pavilion dv6000 laptopThe fundamental problem is that I can't access my images. The icon appears only as a white sheet of paper instead of the photo icon that normally appears. When I try to access it through My Documents, I have photos, right click and go to properties and it always says that it is a shortcut file, but there is no tab for options shortcuts. I tried to restore previous versions, but he said that there was none. I also tried a system restore, thinking he might have got damaged in the course of a update or something, but not luck.I did not need to get into my pictures for a while, so I can't say exactly how long it has been past, only that I noticed the problem today.Just do not know how to approach the situation. Any help/ideas would be greatly appreciated!Hi Carrie2840,
Method 1: Run the fixit available in the links below and check if that makes a difference-Worth to try
Diagnose and repair Windows files and folders problems automatically
Difficulty of broken desktop shortcuts and common system maintenance tasksNote: FixIt would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.
Method 2: Let flow the fixit available in the link below and then check
Windows Photo and slideshow problems
http://support.Microsoft.com/GP/windows_photo_and_slideshow_diag/en-us?EntryPoint=lightbox
Method 3: Select the boot and then check if the problem persists
Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.
If the problem persists, this could be an activity of the virus
Method 4: Run Microsoft Security scanner (MSS) to any threat and try to correct
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: Infected files can be deleted from your computer; There is a chance of data loss.
-
Hoping that someone can help or has had a similar problem.
I just bought a new PC with windows 7, get used to gadgets and was dubious about downloading msn no cert apps/gadgets...
yesterday I downloaded a facebook gadget that worked well at first, but today there dissapeared.couldnt give a s * 1 t on the app
but its stopped me access my gadgets list via a right click on the desktop background and selection gadgets... nothing happens, so I guess that its facebook app, I installed. If all goes well, there is a fix for thisany help would be appreciated... ive been using xp so I havnt had the negative acknowledgement of this gadget stuff yet.
Thanks :)
For any question on Windows 7:
http://social.answers.Microsoft.com/forums/en-us/category/Windows7
Link above is Windows 7 Forum for questions on Windows 7.
Windows 7 questions should be directed to the it.
You are in the Vista Forums.
See you soon.
Mick Murphy - Microsoft partner
-
I uninstalled the driver realtek audio, and then I lost everything. Windows doesn't detect any hardware on my device. Nothing seems to work now
[Moved from comments]Hi Mickey,
- What is the brand and model of the Acer laptop?
- Have you tried to check if the device is detected in Device Manager?
If you have access to the mouse and the keyboard please try the following steps:
Method 1:
If your computer is having problems with a recently installed device or other hardware, try to use the hardware and peripheral troubleshooting tool to solve the problem. It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.
Run the tool and troubleshooting hardware devices
Method 2:
Use Device Manager to find the hardware changes.
Note:
Use Device Manager to find the hardware changes. After your computer search the hardware changes, it can recognize the USB device connected to the USB port so that you can use the device.
To check the hardware changes, follow these steps:
a. Click Start, type Manager of devices in the search box of start and press ENTER.
In Device Manager, click on your computer so that it appears highlighted.
b. click Action and then click Scan for hardware changes.
c. check the USB device to see if it works.
d. restart the computer.Method 3:
Download the drivers using another computer by visiting the manufacturer's website save it to a location external (USB key) and then install it in the computer in question.
Please post back with the State of the question.
-
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas: How to restore?
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall
FYI
http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista#section_3
Reinstall Windows Vista when you want to restore the default Windows settings or when you are having problems with Windows and that you need to reinstall it by performing a clean installation. TaurArian [MVP] 2005-2010 - Update Services
Maybe you are looking for
-
How to clear El Cap and return to Mountain Lion
Hello I need to ask for some advice, because Apple computers are still a little clumsy. I have a late 2012 27 "iMac, and I blindly put on day of Mountain Lion to El Capitan. It turns out that it doesn't play well with Pro Tools 11, and Avid has no in
-
Dual Boot Win XP and Win 98 / Me
I have an Equium A60-692, I want to dual boot it with the existing Win XP and Win 98 (pref) or Winme. I succumbed to the Win 98 or Win Me loading on the hard drive. Even during startup with a completely blank disc. (formatted). The installation fails
-
Try to download itunes HELP!
I get a message that there is a problem with my windows package install and check with the seller, I have the last set of systems installed. Help!
-
R61i; audio device after loading sp2 May 30 problems
Friday, May 30 my r61i sp2 downloaded and when sytem restarted my speaker didn't have a red X and a msg no audio device found. Also on the keyboard volume controls do not work. I am online with the support of mircosoft and with their help reloaded th
-
Wlan Atheros ar5b97 driver problem
Hello, I formatted my computer and installed all the drivers from the manufactorers homepage, but the wifi does not work. I extend my driver for the card WiFi (Atheros ar5b97) but its still the same. Troubleshooting is always written: "there could be