Windows 7 cannot access the cliché in server 2003

Similar Questions

• In Windows 7, cannot access the user profile get the error "the service user profile Service has no logon.

  When you try to access the user profile, get the error message "the service user profile Service has no logon.  User profile cannot be loaded. "The new profile tried to go through the steps of profile user fix damaged by ms, but trying to create a new user profile to copy the files from the damaged user profile does not display on my C: drive the users folder (as it should).  Anyway to fix the corrupted if user profile profile are available?

  Hello

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
  This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as ADMINISTRATOR with password even
  (or two with the same password) use a test or fix the other.

  You can run the Admin account hidden from the prompt by if necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

• Computer Windows 7 cannot access the files on computer Vista but Vista is started the last. Both lasted upgrades of the operating system.

  Both have the latest upgrades of the operating system. Both are running the same version of MacAfee. He used to work without problems up to several weeks, there may be a problem of automatic update but I don't know. Disabled the two walls of fire, nothing works. Cable network Ehternet WORKGROUP. Windows 7 computer can access files through their prorgrams course that Thunderbird (save the attachment without problems) or previously network drive is available. Just Windows Explorer does not see the computer. As soon as I restart the Vista computer, it is visible in Windows Explorer. It's the computer Vista is a central workstation with others and inspires other users that connect at different times of the day that the central computer must be restarted for full access. XP-based computers do not have a problem and can access the files at any time. It is the only computer of Vita.

  Hello

  Follow these steps and check if that helps:

  (a) open centre network and sharing by clicking the Start button, clicking Control Panel, clicking Network and Internet, click Network and sharing Center.

  (b) click on the arrow next to public folder sharing, and then click one of the following options:

  i. turn on sharing so anyone with network access can open files

  II. turn on sharing so anyone with network access can open, change and create files

  III. turn off sharing (people logged on to this computer can still access this folder)

  (c) click on apply.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  You can also read this article and check if this may help:

  http://Windows.Microsoft.com/en-us/Windows-Vista/file-sharing-essentials

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-file-and-printer-sharing

  http://Windows.Microsoft.com/en-us/Windows-Vista/share-files-with-someone

• Windows Vista cannot access the internet, the link speed and Duplex negotiation seems to be the problem

  I have a desktop running Windows Vista Home basic and I can't connect to the internet through a local network, which is connected through a router (Belkin). Adapter type is Internet: Intel 825562V-210/100

  After consultations with the support of technichal society of router and my PC vendor, it seems that there is aproblem with negotiating the link speed. Here are some symptoms:

  I can access the internet if I connect the cable directly to the modem;

  Connected through the router, I can sometimes connecting to the internet if Imaually change settings of connection speed (10 / 100 Mbps, half/full duplex)

  All other PC connected to the network, using Win Vista and throuhg connected to the same router, have access to the network;

  If I connect my network cable to another PC, it will have access to the internet;

  The status of my PC seems to be 'connected' on the site of implementation of routers. The State of my connection is sometimes "Local only" sometimes "Local and Internet", but in fat, there is no internet access.

  I tried the following:

  Trouobleshooting under the direction of the technical support of the router and PC vendor.

  Update the operating system to restore to an earlier date, to restore to the factory settings; Reformatting my PC 2 times, (first internet worked for a few hours only); update the OS (by connecting directly to the modem); Turning off Win Defender, removing software antivirus. Reset LAN connection...

  Any suggestion please?

  New router solved the problem.

  Thanks a lot, especially Jack :-).

  P.J.

• Windows 8 cannot access the drive properties by right-clicking on a no C SATA or USB drive

  Normally the drive properties are selected by right clicking the icon of the hard disk, which gives access to the use of storage and the Player options selected check disk. In Windows 8, I can get the properties of the disk on my C drive by right clicking, but not on any other drive. Right-clicking on any non C drive of the computer loses the office for about 10 seconds, then it returns, but never shows the drive properties window. Help, please! Thank you

  Hello

  Welcome to Microsoft, the best place for all your related queries windows community.

  I see that you are unable to access the drive other than drive C Properties window.

  I would like to suggest to run the command sfc/scannow because it is something related to the file system and check.

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions. When the analysis is complete, the System File Checker tool indicates whether integrity violations were found. If integrity violations are detected, the System File Checker tool difficulty integrity violations.

  Follow these steps to run sfc/scan.

  a. press Windows + X and click/click on (Admin) command prompt.

  b b.. in the elevated command prompt, type sfc/scannow , and then press enter.

  NOTE: It can take some time to finish the race.

  Let us know the results.

  If you have other questions related to the properties of the disk, feel free to join us at any time. We're always here to help.

• Domain users cannot change the password with Server 2003 SP1

  Hello community,

  I use a Server 2003 SP1 as a domain controller.  Now we have implemented group policy which is the default value

  now some users when you are prompted to spend there the password are able to go through the process of implementation of their old password and change to new password but are constantly pushed to repeat the same process.  I don't have any screenshots as of this point of the error, simply users who suffer.  Any information is appreciated.

  Hello

  I suggest to send your query in the TechNet forums and would be better suited for the IT Pro TechNet public.

  Please visit the link below to send your query in the TechNet forums:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  TechNet is watched by other computing professionals who would be more likely to help you.

  Hope this information is useful.

• Error - location: C:\Program Files\Common Program Files Central\Main\msvcr71.dll is not a valid windows image cannot access the desktop icon to burn a DVD.

  Original title: I can't access my desktop icon to burn a dvd.

  I can't access my desktop icon to burn a dvd.  The message I get is as follows, "location: C:\Program Files\Common Program Files Central\Main\msvcr71.dll is not a valid windows image."  Please check this against your installation diskette. "On my toolbar, it said,"mediahub.exe - bad image"can someone please help me as I've used in the past to burn CDs and DVDs.  He moved with the computer.  Thank you

  Hello

  1. have you done any hardware changes or software on your computer before this problem?

  2 do you have a copy of Sonic application backup to reinstall it later?

  I suggest you to uninstall Sonic since Add / Remove Programs. Subsequently, check if you are able to burn CDs in your computer.

  
  Reference: burn your own custom CDs

  Hope the helps of information.

• Windows 7. cannot access the menu widget to click with the right button on the desktop / gadgets

  Hoping that someone can help or has had a similar problem.

  I just bought a new PC with windows 7, get used to gadgets and was dubious about downloading msn no cert apps/gadgets...

  yesterday I downloaded a facebook gadget that worked well at first, but today there dissapeared.couldnt give a s * 1 t on the app
  but its stopped me access my gadgets list via a right click on the desktop background and selection gadgets... nothing happens, so I guess that its facebook app, I installed. If all goes well, there is a fix for this

  any help would be appreciated... ive been using xp so I havnt had the negative acknowledgement of this gadget stuff yet.

  Thanks :)

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Acer Aspire, Windows 7, cannot access the internet or reinstall the drivers? How can I fix?

  I uninstalled the driver realtek audio, and then I lost everything. Windows doesn't detect any hardware on my device. Nothing seems to work now

   
  [Moved from comments]

  Hi Mickey,

  1. What is the brand and model of the Acer laptop?
  2. Have you tried to check if the device is detected in Device Manager?

  If you have access to the mouse and the keyboard please try the following steps:

  Method 1:

  If your computer is having problems with a recently installed device or other hardware, try to use the hardware and peripheral troubleshooting tool to solve the problem. It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

  Run the tool and troubleshooting hardware devices

  Method 2:

  Use Device Manager to find the hardware changes.

  Note:

  Use Device Manager to find the hardware changes. After your computer search the hardware changes, it can recognize the USB device connected to the USB port so that you can use the device.

  To check the hardware changes, follow these steps:

  a. Click Start, type Manager of devices in the search box of start and press ENTER.
  In Device Manager, click on your computer so that it appears highlighted.
  b. click Action and then click Scan for hardware changes.
  c. check the USB device to see if it works.
  d. restart the computer.

  Method 3:

  Download the drivers using another computer by visiting the manufacturer's website save it to a location external (USB key) and then install it in the computer in question.

  Please post back with the State of the question.

• Automatic update of Windows for my Vista Business hung on Jan 6, 10. He tried to uninstall automatically... now says that I have to reinstall Windows. Cannot access the Internet, cannot restore, can't do anything

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: How to restore?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall

  FYI
  http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista#section_3
  Reinstall Windows Vista when you want to restore the default Windows settings or when you are having problems with Windows and that you need to reinstall it by performing a clean installation. TaurArian [MVP] 2005-2010 - Update Services

• cannot access the internet after upgrading to firefox 30.0 on windows 7

  After the upgrade to firefox 30.0 on windows 7, cannot access the internet. FF 30.0 works OK under Vista

  Sometimes it's because of your security software thinking that the upgrade may not be legitimate. You can consult this article: problems connecting to websites after Firefox update.

• "Windows cannot access the specified device, path or file" for each X 86 application on a Windows 2003 x 64 server

  Hello

  I have a Windows 2003 X 64 server and since a week ago everything works fine.

  For a week or two when I try to run an X 86 application, I always get this error:
  "Windows cannot access the specified device, path or file.
  If I run a x 64 apps everything works fine.
  What made a mistake?
  Thank you

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet. Please post your question in the TechNet forums. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Just upgraded to El Capitan and cannot access the calendar. It opens with a "Shift schedules to the server" message Can only Force Quit

  Just upgraded to El Capitan and cannot access the calendar. It opens with a message 'Moving calendars to the server.

  I cannot access all features and can be closed only by using force quit.

  Please stop calendar and also the application of reminders, runs. Force quit if necessary.

  Back up all data.

  If you synchronize some of your calendars, or reminders with iCloud, then in the iCloud preferences window, uncheck that marked calendars and reminders. You will be prompted to confirm that you want to remove your iCloud calendars and reminders of the computer. They will always be in iCloud. Re-check the boxes.

  If you synchronize agendas or reminders with another network such as Google service, please open the preferences panel Internet accounts. Make a note of the settings for calendar accounts, then delete and recreate.

  Launch schedule and see if there is an improvement.

• Jpg file printing - windows cannot access the specified device, path, file

  Original title: I have a similar problem, I can open the jpg fine, I can't print it

  I have a similar problem, I open the jpg fine, I can't print it, permissions are fine. I get the same erorr-windows cannot access the specified device, path, file...

  Hi Janine.

  1. are you able to print documents?

  2. the problem occurs only with a particular image file?

  3. how the printer is connected to the computer?

  4. What is the brand and model of the computer and the printer?

  5. have you logged as administrator?

  Method 1:

  First of all, try to print a test page and check if it works:

  To print a test page

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/print_test_page.mspx?mfr=true

  Method 2:

  I suggest you check out the link to use the System File Checker tool (SFC) to troubleshoot missing or corrupted system files in Windows:

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  Note: you must have the Windows XP disc to make the SFC scan.

  Method 3:

  I suggest you to turn off all third-party security software and the Windows Firewall and then try to print the file:

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  How can I turn on or turn off the firewall in Windows XP Service Pack 2 or later versions?

  http://support.Microsoft.com/kb/283673

  Note: run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

  Let us know the results.

• Computer Windows XP cannot share the public folder or access, it is own to share files through the working group.

  Every time error message:

  \\BOX A\ShareDoc is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.  Not enough server storage is available to process this command.

  I went through the forum after forum and I can not always win.

  I tried
  

  • HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa restrictanonymous.  The value data is 0.
  • -> Panel-> network connections-> area connection-> properties-> Advanced-> Windows Firewall settings
  • Panel->-> LAN-> properties-> Internet Protocol (TCP/IP)-> Advanced-> WINS-> enable NetBios over TCP/IP, network connections
  • Network connections-> Wireless connetion-> properties-> install-> protocal-> add-> microsoft tcp/ipversion6 and then add Protocol->-> NWLink IPX/S/NetBIOS compatible transport protocol
  • -> Panel-> administrative tools-> local security settings denied access to the computer from the network = remove all users
  • HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters-> Dword value = IRPPACKETSIZE = 18

  We'll call the problem BOX computer and the computer in the network of ZONE B.

  Computer configuration:
  All firewall disabled, Windows and McAfee on all computers on the network.
  All VIRUS Protection disabled on all PCs
  BOX A sharing the shared Docs
  Sharing Docs user = everyone
  Everyone has a FULL ACCESS.
  NetBios is enabled.

  Configuration of the Working Group:
  Workgroup = AREA A = ZONE B = MSHOME
  I can successfully Ping BOX A go BOX B and vice versa.

  Measures to control the error:
  I have Open View Workgroup Computers and BOX A and BOX B see each other and to themselves.
  The BOX can access files of the shared BOX B.
  BOX B cannot access the shared files A BOX.
  BOX B can access its own files shared over the network.
  BOX A cannot NOT ACCESS its own files shared over the network.

  I try next? Why can't display BOX A there own shared via the network, the documents?

  I'm still not win... any suggestions?

  Thanks for the tips. I found the problem.

  • HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters-> Dword value = IRPPACKETSIZE = 21

  I had to climb higher I guess. This fixes the problem described above, but now he has opened a new WIndows 7 PC interfacing program with the Windows XP working group.

  I have more reading to do.