Windows Vista does not recognize the drive c does not appear in 'my computer '.

Similar Questions

• My Windows vista can't recognize the digital camera usb conncetion, can anyone help?

  I uninstalled the drivers and still does not recognize the usb 2.0 connection.

  Hi Jack,

  1. What is the brand and model of the camera?

  2 do the camera work on any other computer?

  3. other USB devices work properly?

  4. did you try connecting to different USB ports?

  5 have had any changes made to the computer before the show?

  Please follow the methods and check if it works very well.

  Method 1:

  Run the Microsoft Fixit for the link.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2:

  Try to uninstall and reinstall the USB controllers

  a. click the Start button.

  b in the start search box, type devmgmt.msc and press enter

  c. expand Bus USB controllers

  d. right-click on the first USB controllerr under Bus USB controllers and then click Uninstall to remove it. Repeat these steps for the entire USB under Controllers USB Bus controller.

  e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

• Windows Vista does not recognize the graphics card and the broadband

  Original title: recognize the graphics card and the broadband connection

  Windows vista can't recognize the graphics card and the broadband connection in the Dell laptop

  Hi mfadhelmu,

  1. When did you start to question?

  2. you remember to make changes to the computer before this problem?

  3. you receive messages or error codes?

  4. have you updated all device drivers?

  You can try to launch the Fixit and see if it helps:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows Vista does not recognize external USB 260 GB HARD drive

  I have a 260 GB Seagate external hard drive, a laptop Toshiba satellite and Windows Vista Basic.

  The same Windows usually choose the hard drive when I plug it, it does not appear in Device Manager and in disk management, the only way I can get it to work is to uninstall all the USB root hub and then restart the computer, and then reinstall the USB root hub and plug my hard drive.

  When windows finally recognizes him, the only way to find the driver must choose c:\ manually and there's the search for the computer.
  Works for the time that I have the computer hard disk, but when I stopped it, next time I use the computer, I'm having exactly the same problem.

  I tried to remove the hard drive safely and then close the computer and by him plugging back in after windows has loaded, I tired it connected from the computer and tried to close the computer with connected.

  None of these work.
  Can someone help me please?

  Strange?  :|
  But what need s say Microsoft Windows so I don't expect 100% without bug OS ;)

  Disconnect the USB HDD and remove all the USB ports and Device Manager USB controllers. After restarting again the OS should reinstall ports. Then you could try to reconnect the HARD drive.

• I try to install vista on a computer running xp. XP does not even recognize the vista disc is in the drive. XP recognizes any other drive that I use and the vista drive is recognized on other computers, that I put it in it's not a prob with the disk or cd

  I try to install vista on a computer running xp. XP does not even recognize the vista disc is in the drive. XP recognizes any other drive that I use and the vista drive is recognized on other computers, that I put it in it's not a prob with the disk or cd rom

  The Vista installation disc is a DVD. Apparently, you don't have a DVD player. You would need to purchase/install a DVD-ROM or DVD - RW to install Vista. Are you sure that your hardware supports Vista before doing this?

  http://www.Microsoft.com/Windows/Windows-Vista/get/system-requirements.aspx
  Even if a minimum of 1 GB, the requirements in the real world Vista requires a minimum of 2 GB of RAM to run without problem. You will also need Vista drivers for all your hardware.

  http://www.Microsoft.com/Windows/Windows-Vista/get/Upgrade-Advisor.aspx MS - MVP - Elephant Boy computers - don't panic!

• Windows Vista does not recognize the removable storage device

  ISSUE INITIAL 2010-03-03)
  Here's the scenario:
  1. Insert the card compact flash.
  2 computer recognizes the removable storage (that is, it is assigned a drive letter and appears in disk management).
  3. use the icon remove the device safely in the taskbar to stop the machine to remove safely.
  4. remove the card compact flash.
  5. Insert the compact flash card.
  6. the computer does not recognize removable storage (that is, it is not assigned a drive letter and does not appear in disk management).

  The only way I can get windows to recognize the drive is to restart my computer. How can I get windows recognize the drive without having to reboot?   This problem does not occur with USB flash drives.

  Windows Vista Hame Premium, 64-bit, Service Pack 2 operating system

  UPDATE (04/03/2010):
  I have more information, I hope this helps to reach a solution.

  -J' repeated the steps above 1 to 3, with open Device Manager.  In step 3, in the Device Manager window, the icon for the question USB mass storage device becomes the exclamation point in yellow triangle icon.  Check its properties on the tab "General", in the "Device status" box, it says: "Windows cannot use this hardware device because it has been established for"safe removal", but it has not been removed from the computer. (Code 47)  IX this problem, disconnect the device from your computer and then reconnect it.  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »
  -J' then removed the card and rest of the error state.
  -J' I re inserted the card, and rest of the error state.
  -J' I then tried to update the driver by accessing the tab "driver", click on "Update driver", click on "Automatically search for an updated driver", and the result was "the best driver for your device is already installed."

  I found the solution on this hp web page:
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=bph07910&tmp_task=solveCategory&LC=en&DLC=en&cc=us&product=3876397&lang=en#N1074

  Basically, it says NOT to use the function "remove the device safely.  Instead, just right-click on the drive in the Solution Explorer, then choose "Eject".  Works perfectly.

  Some excerpts...
  "Memory card readers are devices that use the icon remove the device safely in the notification area in the taskbar). Do not click stop in the window, remove the device safely. Doing so can disconnect the card memory reader for Windows. In this case, restart the computer to reset the memory card reader. »
  "An alternative to the restart of the computer is to use the option optimize for fast moving functionality in Windows.

• Satellite L30-105 (PSL33E) Windows Vista does not see the DVD - ram UJ-850 s

  Hello

  I have a Satellite L30-105 (PSL33E) with windows Vista. Windows Vista does not recognize the DVD - ram. BIOS recognize DVD-ram. I tried to download the drivers for the DVD-ram, but they are not on the side of Toshiba.

  Who can help me to get the right driver or learn more? Problems with the carpet * a DVD-ram uj-850 s ATA device and windows Vista.

  Hello

  The CD/DVD drive needs no special drivers!
  Vista includes a Microsoft driver that works with all CURIOUS s (CD/DVD drives)

  Simply said, the Vista should recognize the drive without any problems.

  A few questions; did you get any error messages? What is the status of Device Manager? Do you see yellow exclamation points?

  There is an old way to correct a similar drive problem. It worked on XP then try it on Vista OS.
  It of necessary to update the registry entry
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  1. click on the start menu.
  2. If it is a Vista machine in the search box type regedit without quotes.
  3. look for the registry key mentioned above.
  4. in the right panel you'll see something along the lines of UpperFilter and UpperFilter you want to click on each key filter and tap on delete. Click Yes when asked to confirm if you want to delete the key.
  5. restart Windows.
  6 let me know if it works.

• CD/DVD does not recognize the drive.

  CD/DVD does not recognize the drive.  Error message-"Insert a disk." "" "Insert a disk in the drive (E or F, depending on whether one in use).  I bought a DVD/CD thought exteranl today that might work.  Same error message with the external dvd/cd.  Can hear the disc turning when it is inserted during a short period of time, maybe 20 seconds, then it stops.  Sometimes, the disc is ejected when the error message appears, sometimes not.  Same results even with blank CDs.

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows Vista does not recognize my DVD player. It is a Pioneer DVD - RW DVR - 110 d ATA Device.

  I looked at the information system and noted that there is a device error.  After checking for a solution online, this is the message I got:

  Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 39.

  Hello

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Windows Vista does not recognize my Ipod Touch

  Windows Vista does not recognize my Ipod at all. He even appears in Device Manager. I know that is not my USB cable because it is new, and it isn't my Ipod because it works on Mac computers. I just need someone with expertise to help me get my computer to recognize my Ipod so I can go back to enjoy my music.

  Hello

  MTP mode for WMP11 sync - mode MSC to treat the MP3 as a reader. So you have set up in the MTP.

  -----------------------------------------
  If necessary:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Make sure that Windows is updated appropriately that there have been several USB updates.

  1 check that the driver letters for them, for a player, if the drive of the default drive letter is changed, what is happening.
  Mine was h: I added a device that took H: and the player stopped. So I put it back to H: and the other
  device to J: and everything worked again. If necessary start - type in the area of research-> disk management find top
  -Right-click on it - RUN AS ADMIN

  Don't forget to remember the MP3 must be set to the PSG to sync with WMP, and meteorological service of Canada to copy and delete files
  and update the firmware.

  If no joy follow these steps:

  You may need a powered hub. (all the USB ports on your computer are not powered, often only 2)

  Try these:

  Make a Restore Point

  Control Panel - Device Manager - click in the empty area - VIEW - show hidden devices

  Here, your devices are the MP3 player.

  Now look everywhere EXCEPT the USB controllers for your devices (cannot be found) and if you find
  It RIGHT CLICK and UNINSTALL all.

  now go to the USB and UNINSTALL ALL controllers in the category, but the category itself.

  APPLY/OK

  RESET

  This refresh battery USB and hopefully it will allow the unit to install. (You may need a powered hub)

  Here is the similar procedure under XP, Vista is the same, except that we need clear specific devices, as appropriate.
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer, as well as all USB devices that you previously used. Run Options and check the 1st three choices to see if one is there.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Computer does not recognize the driver for HL-DT-STDVDRRWGSA-H2OL ATA Device

  original title: HL-DT-STDVDRRWGSA-H2OL ATA Device

  its as it disappeared from my machine. the computer will recognize the pilot but but the drive does not appear when I go to computer file. If you insert a cd in the drive, it runs but can not read the cd/dvd.

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• Compaq presario cq57-339WM does not recognize the drive as a bootable disk recovery

  Compaq presario cq57-339WM does not recognize the drive as a boot drive recovery, I'm sorry people, I searched and I entered the job in New York as a matter of research. Operating system is 7 Home premium. Hard drive went bad, so I rplaced with new. I have had I have windows image backup, but the wizard could not find the hard drive. I ordered the HP poped the first of the two recovery disks, but the machine does not recognize the drive as a bootable disk recovery. I did factory retrieve records a large number of times on computers with different operating systems and have never seen this. TNA

  Randy Rich

  I found this on PC world. I downloaded everything I need, I hope. I tried not to build the disk again. I need some rest and sleep. Stay tuned for more develonents. Here is the link http://www.pcworld.com/article/2364269/how-to-reinstall-windows-like-a-pro.html?page=2

• Windows Vista does not recognize my Canon powershot A710IS

  Recently tried to download photos for the first time in a few months and the USB or the SD card reader worked. The USB works for other things such as Chargers, printer, etc. Under Device Manager there is no option for a digital camera. My laptop does not recognize that anything has been plugged. Help, please!

  Recently tried to download photos for the first time in a few months and the USB or the SD card reader worked. The USB works for other things such as Chargers, printer, etc. Under Device Manager there is no option for a digital camera. My laptop does not recognize that anything has been plugged. Help, please!

  ===================================
  Maybe your AutoPlay settings need to be adjusted.

  Windows Vista - Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  Windows Vista - AutoPlay: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

  Windows Vista - How to change the auto run settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  The following items may be worth a visit:

  (927836) a still digital camera is not recognized
  in Windows Vista or in Windows XP
  http://support.Microsoft.com/kb/927836/en-us

  Windows Vista: Using the scanner and Camera Installation Wizard
  http://grok.LSU.edu/article.aspx?articleid=10705

• HP G60-235DX notebook pc does not recognize the drive d (cd - dvd drive)

  I'm reading a music cd in d drive.  My computer does not recognize the drive.  I can solve this problem?

  Press the Windows Logo key and the R key to open the run.

  Type;  regedit, and then click OK

  Navigate to:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  With the right button of the upper filters button, if necessary, and then click 'remove '. Click on the Yes"" button.

  Click the lower filters key, if present and click 'delete '. Click on the Yes"" button.

  Try again your CD.

• Windows Vista does not start. I tried to run the Startup Repair tool and we have tried to select start Windows normally.

  original title: URGENT

  How to start Windows Vista when 'Launch Startup Repair' or 'Start Windows normally' did not work? I want to avoid the deletion of my data.

  Hello

  for starters, the info you received a DVD of windows 7 repair vista usage are BAD

  you need a DVD vists or a vista Startup Repair disk repair vista

  and you can NOT do a repair installation of booting from a DVD in vista

  Repair facilities are on within an operating system

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  If necessary

  Data recovery

  1. remove the hard drive and it slave in another computer

  2 buy or borrow a USB disk drive hard put in yout case then plug it into another computer and read the hard drive like this

  3. try Knoppix

  http://www.Knopper.NET/Knoppix/index-en.html

  BUT this method depends on your hardware in the computer that failed