Windows Vista is not compatible with Sagem router?
Click with the right button on command prompt and select run as administrator - type the following command
netsh winsock reset
Press enter
Now it works?
Have you tried: disconnect the battery & leaving for an hour
change the channel on the router
change power options
verification of the IP address is detected automaticall
Uncheck for automatic IP address
Change the firewall settings/turn off the firewall
installation of the SP3
Tour of WPA security
He turned back
tried switched to WEP
There's a fixit here. If editing the registry yourself, do exactly what he says.
http://support.Microsoft.com/kb/928233/en-GB
1. run regedit.
2. navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\tcpip6\Parameters\DisabledComponents. If you do not see DisabledComponents, create one by adding the following registry value (type DWORD).
3. change one or a few values:
1 = disable tunnel interfaces
2 = disable 6to4
3 = DΘsactiver ISATAP
8 = disable Teredo
16 = disable LAN interfaces and PPP
32 = preference set of IPv4 to IPv6
255 = disable full IPv6
Note: 1) you must restart the computer for changes to the DisabledComponents registry value to take effect.
(2) this method disables IPv6 on all your interfaces LAN, connections, and tunnel interfaces but does not disable the IPv6 loopback interface. You must restart the computer for this registry value is taken into account.
II.
1. open the properties of the local area network.
2. uncheck the box next to the Internet Protocol version 6 (TCP/IPv6) component in the list under this connection uses the following items.
This method disables IPv6 on your connections and LAN interfaces, but does not disable IPv6 on the interfaces of tunnel or the IPv6 loopback interface.
-AndreaPB-
Tags: Windows
Similar Questions
-
XP to Vista upgrade, the message that Vista is not compatible with Windows XP
Original title: Upgrade Vista XP
I tried to update my windows XP to Windows Vista and get the error message that Vista is not compatible with Windows XP. It is an original cd of dell that I got years ago and have not upgraded I liked XP. Any thoughts on patches or fixes for this?
Hi Dennis,
The upgrade to Windows Vista from Windows XP requires some preconditions for the computer that you have this problem in. This article treats all these prerequisites. I suggest you read the information in this article and see that if your situation meets all the conditions required or not, here is the link:
http://Windows.Microsoft.com/en-us/Windows/installing-reinstalling-Windows#1TC=Windows-Vista
Please check all of the information provided in this article carefully. Keep us up-to-date with the status of your side, we will be happy to be of further assistance.
-
* Original title: Windows Media Player for Windows 7
It seems that my computer (windows 7) did not come with Windows Media Player. When I tried to download it, it has stated that windows 7 was not compatible with my computer and gave me a windows xp download. Why is this and how would I be able to get the version for windows 7?
Hello
What version of Windows 7 do you have? What is an "N" or "KN" version that doesn't include WMP 12?
Start - type in the search box-> WinVer find upstairs and double-click it.
Media Feature Pack for Windows 7 N and Windows 7 KN (KB968211)
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=31017ed3-166a-4C75-b90c-a6cef9b414c4&displaylang=en========================================
If this did not help to tell us which version of Windows you have.
========================================
Check the Task Manager to make sure that WMPlayer.exe is not already running, and if it is complete the process
on this subject. Click right tab taskbar - TaskManager - process.-------------------------------------------------
Make sure that Windows Media Player is on.
How to enable or disable the features of Windows 7
http://www.SevenForums.com/tutorials/5023-Windows-features-turn-off.html-------------------------------------------------
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html---------------------------------------------------------------
Do this to reregister the Jscript.dll and Vbscript.dll files.
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
type or copy and paste-> regsvr32 jscript.dll
Press entertype or copy and paste-> regsvr32 vbscript.dll
Press enterRestart and if all goes well, it will run now.
I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Windows 10 is not compatible with genie, someone has ACTUALLY a solution?
I just updated my computer laptop microsoft Windows 10 because I was stuck with 8.1 for so long, super happy until I went to redownload genius because it deleted a little after the update, and now it is not even freaking work with windows 10. The new SUCKS update because it is not compatible with the latest technology for windows... is there actual patches? I went through the discussion after discussion and nothing really works or it is not found. Help!
Hi @skunkylouou,
We apologize for the inconvenience, as the cause of the problem has been just recently discovered. Rest assured, we are working on a fix for future updates. Have you tried the temporary work around? If this isn't the case, you can follow the steps below.
1. install the latest version of NETGEAR genius. You can use the below download link.
http://Netgear.com/Home/Discover/apps/genie.aspx
2. Once you have successfully installed the program, go to C:\Program Files (x 86) \NETGEAR Genie\bin
3. remove the drivers folder.
4 download the drivers from the previous version of NETGEAR engineering using the below download link.
https://drive.Google.com/file/d/0Bz-pjmQaYmk6bEVUbmxtUTY0MW8/view?USP=sharing
5 unzip the file to your favorite place (Office would be easy to locate). It will contain the drivers folder.
6 copy the drivers folder you have just unpacked and navigate to C:\Program Files (x 86) \NETGEAR Genie\bin
7 paste the folder drivers.
8 restart the genius of NETGEAR program
Kind regards
Dexter
The community team
-
Laptop with Windows 7 does not connect with the router
(Not this computer) laptop with Windows 7 does not connect with the web. Box of message says - "t8ExtPEx.dll is missing". Any help is appreciated.
(Not this computer) laptop with Windows 7 does not connect with the web. Box of message says - "t8ExtPEx.dll is missing". Any help is appreciated.
Hi Roger,
We would like to learn more about the issue. You get this message when you launch your Internet Explorer, or when you work with all Office applications?
You can also try the solution posted by Redcar92 on this link: 8ExtPEx.dll is missing.
Let us know how it goes.
-
Windows Vista Home Premium compatible with Office Excel 2013?
I have Windows Vista Home Premium.
I bought Office Excel 2013. While trying to install Excel, "system of operation unsupported" appears. Says I need a 32-bit Windows 7 in the office of successful execution.
My Windows Vista computer is a 32-bit.
When I bought the product key, the employee said that Windows Vista works with it very well. Is this true?
What should I do to be able to use this Excel?
Thank you.
BB
No office 2013 is only compatible with Win 7/8. As it says here
I would like to take back and get a refund. Otherwise, you will need to purchase Windows 7 or 8 If you want to use -
Windows Vista will not synchronize with internet time server
I am running Windows Vista Business SP2 and Norton Internet Security on a Lenovo T61. All updates for Windows, Norton and Lenovo have been applied. When I try to synchronize with a time server Internet, I get the error message ' year error occurred while synchronizing with time.windows.com "I tried each of the other servers listed time and still get the same error message. I spent reviewing the configuration of the firewall in time of Norton Internet Security and S32 and port 123 are enabled. I tried to synchronize with the two Norton Internet Security Firewall on and outside, with the same results. I have internet google and looked for a solution of Microsoft. After reading all the posts relating, I tried the following:
running administrative invite
net stop w32time
w32tm /unregister
w32rm /register
net start w32time
Each performed positively.
This has not solved the problem. I then ran:
w32tm/config /update
This is performed in a positive way.
This has not solved the problem. I then ran:
w32tm/Resync /rediscover
He responded with "the computer did not resync because no time data was available"
I then ran:
w32tm/query/status
He responded with "last successful synchronization time: not specified.
The local Group Policy Editor reads for providers of Service/Computer Configuration/Windows Administrative Templates/time/system time
Configure Windows NTP Client not configured
Enable Windows NTP Client not configured
Enable Windows NTP server not configured
In summary, it seems that my computer has never synchronized with an Internet server time.
If you need additional information, please provide specific instructions on how to get it and I will provide.
From time to time, I checked to see if I resync of internet time.
Out of the Blues started windows resynchronize.
The only change I can think is that AT & T reset head of communications AT & T defaults shortly before he started work. This tends to confirm my opinion that it was a problem of communication.
PROBLEM SOLVED!
-
Windows Vista does not work with modem wireless broadband
I saw no answer to this problem. Can anyone help?
Windows Vista on my DELL laptop at home does not work with my new NETGEAR modem wireless broadband 3 G. The modem appears in the list of networks, I just errors like: unable to connect, cannot diagnose,... Both devices work perfectly well together when connected by cable but not wireless. Interestingly, my laptop work, also a DELL but runing Windows XP, works very well with the NETGEAR modem.
Summary:
Vista / Netgear wired - work
Vista / Netgear wireless - does not work
XP / Netgear wireless - workI went through the NETGEAR troubleshooting guide, doing everything from changing the types of security to manually enter the MAC address of the laptop. I ran to the ground with the NETGEAR support engineers, and they said check with Microsoft. I am convinced that it has something to do with Vista. Any ideas?
Hi jhandcc,
Please provide the complete error message you receive.
Step 1: You can follow the steps described in the article below
Error message when you try to automatically connect to a wireless access point that uses authentication of network shared in Windows Vista: "Windows cannot connect to"
" "»http://support.Microsoft.com/kb/948180
If the problem persists,
Step 2: Download and install the latest service pack for windows vista on the computer
How to obtain the latest Windows Vista service pack
http://support.Microsoft.com/kb/935791/
Reference:
You cannot connect to a wireless network on a Windows Vista-based computer
http://support.Microsoft.com/kb/935222
For more information, see the link below
Solve problems, find wireless networks
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks
Let us know if this helps
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Windows 7 is not compatible with the new Norton SystemWorks Prime Subscription
I received the new Norton SystemWorks first Edition subscription renewal by email. After trying to download and install the product, I rec'd a window stating: "this product requires Windows XP or Vista.
Please let me know how to do this. I was hoping to get a service pack or two, and that would be that. I'm not having luck while browsing the site from Ms. Help!
Jan
Norton went this program in 2009.
http://en.Wikipedia.org/wiki/Norton_SystemWorksIMO you should consider yourself lucky. Norton's Windows compatible security programs less there, and you pay for them.MSE, Avast and Avira are freeware. They work very well and are not pigs resource like Norton. -
Windows 7 Professional is not compatible with the WPS ENABLED?
Hi all:
I have a desktop (HP Pro 3500 Series) with Windows 7 Professional and another laptop (HP COMPAQ CQ58) with Windows 8, 1 pro.
My internet provider is Jasstel, and it worked perfectly in my two computers.
I decided to activate the WPS of the router (comtred AR 5387un) and they started the problems. The laptop with Windows 8, 1 runs normally.
The desktop with Windows 7 without work and it does not allow the connection to the Internet. The generated error is security configuration, it is incorrect.
I erased the net so that I have again the password. You ask that I introduce the safety key from the net. I introduce the key (which she's right, because it works in another computer), and he told me that I should he Nail or the sentence of the password is not right and there is not the case.
The only thing you change is the operating system. Windows 7 is not compatible with active WPS?
I thank any help no I don't know what to do.A cordial greeting.
Text of the Decree No. presidential East I translated it with a commercial translator. I am ignorant of the quality of the translation. Excuse me, otherwise it is all about what is good who do.
Hello colambrero,
This model is a class computer business and would be better asked in the forum of the Business Enterprise community.
Here is the link to the appropriate section. http://h30499.www3.HP.com/T5/business-PCs-Compaq-Elite-Pro/BD-p/BSC-271
I offer you my thoughts.
I was wondering why you have decided to activate the WPS? It's easier to connect wifi devices but also creates security problems. WPA2 with a good password is more reliable in my opinion.
In addition, your Wifi adapter must be compatible WPS and I can't confirm if your model has one or not (I assume it does).
Windows 7 that has Service Pack 1 installed? SP1 has a fix for problems with connections WPS for Windows 7.
Personally, I would consider not not using WPS for security issues.
Here is an article to example of Sophos Security explaining why not to use WPS.
http://nakedsecurity.Sophos.com/2014/09/02/using-WPS-may-be-even-more-dangerous/
It will be useful.
-
My Windows Media says it is not compatible with any DVD security code I try to play.
I use my DVD player on my computer all the time when I want to watch a movie and am not in a room with a DVD player. I just used it about 3 days ago and it worked fine. Now, when I put a DVD, a DVD, an error message appears saying that Windows Media is not compatible with security on the DVD (s) codes that I'm playing, and I need some sort of update. It doesn't tell me what I need and when I click on 'web help', I said that there is a mistake, and that there is no other info. I'm not a geek of any kind and do not really understand computers for use much more basic. Please help me understand what the problem is, and if I need an update, where. Thank you.
Hi Mary,
Thanks for posting this question in the Microsoft Community.
I'll try to help you get the problem solved.
I would be grateful if you could answer the following questions:
- Are what you signed up as an administrator?
- Are you aware of any change (software or hardware) performed on the computer before the show?
You can perform a System Restore to the date when the computer was working fine and check.
Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
Hope this helps and let us know if you need more assistance. We will be happy to help you.
-
Tecra S2: BIOS 1.3 is not compatible with Windows Vista
I just bought Windows Vist Ultimate and I tried to install it on my tecra laptop S3 and it said that I had to update my bios. so I've upgraded to the latest version on the toshiba site (v1.3), but I got the same message please provide an upgrade of the bios that is compatible for my computer vista laptop or provide where I can find the update.
Hello
Pilot site Toshiba says that the 1.3 BIOS Tecra S2 was released on 06/19/2006
It seems that it s not a final version of Vista and therefore it s is not compatible with Vista.Unfortunately, everything that you expect the Vista installation until the new version of the BIOS is available.
-
Program, managing your money get the version of the file is not compatible with Windows Vista
I'm trying to run an old program, manage his money, on Vista Home Premium 64 - bit. It ran OK on Win XP. When I try to run the setup.exe, I get error - "the version of this file is not compatible with the version of Windows hou are running." I tried to use the program compatibility Wizard. No help. Same mistake. Anything else I can try?
If you get this error and the Compatibility Mode doesn't help, then the program simply is not compatible with this version of Vista, and if you want the program, you will need to check with the manufacturer to see if they make a full install version which is compatible with Vista and buy the program more recent. If they do not have such a version, then I'm afraid you're just out of luck with this program. The only other option MIGHT be Virtual PC, but even that is not a guarantee and is a little extreme just to get an old program running.
Sorry if this isn't what you wanted to hear, but it's like that.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
I recently installed Windows Vista on my Dell Inspiron 6000. This installation is completed successfully, but when I tried to start, I got an error message:
Winload.exe
Attempt to load a 64-bit application, however this CPU is not compatible with the 64-bit mode.
I've been clean installation Windows Vista Home Premium. I already had Windows XP Media Center 2004. What should I do?
Thank you
Ryan
Hello
Do a clean install of XP with the XP disk provided by Dell, if you.
http://pcsupport.about.com/od/OperatingSystems/SS/instxpclean1.htm
If you do not have your XP disk, you can contact Dell and ask them to send you a XP disc.
They should do this for a small fee.
You need to change the Boot order to make the DVD/CD drive 1st in the order of startup and startup disk:
How to change the Boot order in BIOS:
http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm
"How to replace Microsoft software or hardware, order service packs and replace product manuals.
http://support.Microsoft.com/kb/326246
Vista installation was able to destroy this option of relocation:
And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall XP back on how you purchased your computer.
The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)
A Dell must rely on Ctrl + F11 at STARTUP to reinstall XP
See you soon.
-
I had adobe Flash Player on my computer for several years. When I went to use a youtube program to download videos and watch training videos, he said I had to update my flashplayer. When I tried I install after downloading, I got the message, it was a bad not compatible with Vista Windows32.
I what to do to install it, or is there another program to replace?Hello
This can help you:
Download and run the Flash Player uninstaller program.
http://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Windows.html
Then download and install Flash Player; After unchecking installing Chrome and Google toolbar option:
http://get.Adobe.com/flashplayer/?promoid=BUIGP
If the problem persists, you may want to ask in the Forums of community Flash Player:
http://forums.Adobe.com/community/flashplayer
See you soon.
Maybe you are looking for
-
IPhone 5 seems to be misreading of numbers to which I send SMS
When you attempt to send group SMS (2 persons or three), a green - get SMS error message I am trying to contact an invalid number - last error message repeatedly referenced 726, also 6275, also 6453. This problem started on August 24, 2016. AT & T
-
HP Pavilian 533w - Multimedia Audio Controller will not charge
I have a HP Pavilion 533w, I can not get the multimedia Audio Controller to load. I am running Windows XP home, and this is a new installation. The error code is 28 and I visited HP website and followed all their directions without help. Can someone
-
Delprof delete user profiles, but leaves some user profile folders empty!
Some of our systems have more than 300 profiles and allows us to remove the profiles older then 15 days, delprof Delprof is remove the hive and all data of the users folders, but leaves behind the record. Any reason why this happens and how I can get
-
How to set up the connection to a wireless network.
I have a wireless net via my connection uverse and I need to know how to configure my computer dell laptop, which has a wireless card to connect to my wireless NET.
-
phone will not connect to WiFi
Hi, my phone is not connecting to WiFiIt was fine to start with and now it does not work. I tested my WiFi with others and they all get the signal and excellent connectivity.My z2 is either stuck in step "obtaining the IP address" or telling me he av