Windows Vista not checking updates

Similar Questions

• Windows vista not install updates, how can I solve this problem

  I took my computer compaq running on windows vista & my windows updates will not install what can I do?

  I have been working on this since April too and may not know how to solve this problem.  Last update was in March.  I used the MicrosoftFixit.wu.MATSKB.Run with no luck.  He says that he can not solve the problem and leads to a MS web page, which doesn't help.   I also stop the update services and several DLLs and then restarted them without success, according to a website of windows troubleshooting.  I am not prepared to roll back, nor do I want to reload the operating system.  If I do that, I'm going to Linux.

• Window could not check the update

  I bought a new laptop Toshiba Satellite A500/02J and install Windows 7, 64 bit.
  The problem is that when it's time set to automatic update of Windows 7, the message "window could not check the updated" comes top-code 8024402F - "window meeting unkown error."

  How can I fix?
  Thank you

  Jin

  This question is discussed:

  http://www.Vistax64.com/Vista-General/115708-Windows-Update-error-8024402f.html

  This is for Vista but can be also useful for Windows 7

• My Windows Vista downloads of updates and then said: I have to restart the computer for the updates to day work, but when I do the updates do not work at all and the computer has trouble again restart.

  Cannot update Windows Vista, with the update functionality.

  Hey Charley,

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, you can not install Windows updates.

  This problem can occur because of inconsistencies in Windows Update.

  Perform the steps from the link below and see if it helps.

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  Important:  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/( )

  Warning of Chkdsk.
  
  Important: When running chkdsk on the drive if bad sectors are found on the hard drive, then chkdsk attempts to repair this sector. If no data is available while data may be lost.

  Hope this information helps.

  Answer to us if you have problems with Windows Update or any other issue of Windows, and we would be happy to help you.

  Good day!

• For Windows Vista (KB2419640) security update will not be installed keep getting CODE of ERROR 8E5E0147. Operating system MS Windows Vista Home Basic 32-bit SP2

  For Windows Vista (KB2419640) security update will not be installed keep getting CODE of ERROR 8E5E0147. MS Windows Vista Home Basic 32-bit SP2 operating system.

  Help, please

  Thank you

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

• Windows Vista - August 2010 update

  Windows Vista - August 2010 update. Stuck at 17 of 18 updates. Hard drive is occupied after 17 hours of update.

  Hi JX2,.

  1. you receive an error message?

  2. do you have security software installed on the computer?

  First restart the computer and check more later history of the update to get the update failure and post details back with details.

  (a) open Windows Update by clicking the Start button. In the search box, type Update, and then in the list of results, click Windows Update.

  (b) in the left pane, click view update history.

  (c) to view more information about an update, double-click it.

  Also try to install new updates after restart the computer after the computer is clean boot state in order to avoid any interference from third-party program while installing updates.

  See the Microsoft article below and try again mentioned step

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/949358

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I scan for Windows Vista Service Pack update (published 4/2009) comes in,

  I redid my computer a few months ago restore to factory settings and restore my files from a backup disk. Everything seemed to work properly.  A few weeks ago a full scan found a worm & some virus which I removed. Now, I have a problem with the updates. When I scan for Windows Vista Service Pack update (published 4/2009) arrives.  When I click to install it, it is saying it is correctly installed (in 30 seconds) and yet he continues to come when I'm scanning for updates.    Should I restore settings again?  After looking for info on the forums of windows, I did the System File Checker to check corrupt files.  Several corrupted files appear in the details of the SFC.  But their fixation is "over my head".   I glued the SFC details below. Any help would be appreciated.  Thank you

  2012-09-04 11:51:44, info CSI 00000006 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:51:44, transaction Info CSI 00000007 [SR] beginning verify and repair
  2012-09-04 11:51:47, info CSI 00000009 [SR] full audit
  2012-09-04 11:51:48, CSI of information 0000000 components [SR] a check 100 (0 x 00000064)
  2012-09-04 11:51:48, CSI Info 0000000b transaction [SR] beginning verify and repair
  2012-09-04 11:51:53, CSI to 0000000 d [SR] full audit information
  2012-09-04 11:51:53, CSI 0000000e Info [SR] components check 100 (0 x 00000064)
  2012-09-04 11:51:53, CSI Info 0000000f transaction [SR] beginning verify and repair
  2012-09-04 11:51:55, info CSI 00000011 [SR] full audit
  2012-09-04 11:51:56, info CSI 00000012 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:51:56, transaction Info CSI 00000013 [SR] beginning verify and repair
  2012-09-04 11:51:57, info CSI 00000015 [SR] full audit
  2012-09-04 11:51:57, info CSI 00000016 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:51:57, Info CSI 00000017 [SR] beginning verify and repair
  2012-09-04 11:51:59, info CSI 00000019 [SR] full audit
  2012-09-04 11:51:59, CSI Info 0000001 components [SR] a check 100 (0 x 00000064)
  2012-09-04 11:51:59, CSI Info 0000001 b transaction [SR] beginning verify and repair
  2012-09-04 11:52:01, CSI Info 0000001 d [SR] full audit
  2012-09-04 11:52:01, 0000001e Info [SR] CSI components check 100 (0 x 00000064)
  2012-09-04 11:52:01, CSI Info 0000001f transaction [SR] beginning verify and repair
  2012-09-04 11:52:03, info CSI 00000021 [SR] full audit
  2012-09-04 11:52:03, info CSI 00000022 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:52:03, transaction Info CSI 00000023 [SR] beginning verify and repair
  2012-09-04 11:52:04, info CSI 00000025 [SR] full audit
  2012-09-04 11:52:05, info CSI 00000026 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:52:05, the transaction Info CSI 00000027 [SR] beginning verify and repair
  2012-09-04 11:52:06, info CSI 00000029 [SR] full audit
  2012-09-04 11:52:07, CSI Info 0000002 components [SR] a check 100 (0 x 00000064)
  2012-09-04 11:52:07, CSI Info 0000002b transaction [SR] beginning verify and repair
  2012-09-04 11:52:09, info CSI 0000002d [SR] full audit
  2012-09-04 11:52:09, CSI [SR] 0000002e Info components check 100 (0 x 00000064)
  2012-09-04 11:52:09, CSI Info 0000002f transaction [SR] beginning verify and repair
  2012-09-04 11:52:11, info CSI 00000031 [SR] full audit
  2012-09-04 11:52:12, info CSI 00000032 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:52:12, transaction Info CSI 00000033 [SR] beginning verify and repair
  2012-09-04 11:52:13, info CSI 00000035 [SR] full audit
  2012-09-04 11:52:14, info CSI 00000036 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:52:14, transaction Info CSI 00000037 [SR] beginning verify and repair
  2012-09-04 11:52:15, Info CSI 00000039 [SR] check complete
  2012-09-04 11:52:16, CSI Info 0000003 components [SR] a check 100 (0 x 00000064)
  2012-09-04 11:52:16, CSI Info 0000003b transaction [SR] beginning verify and repair
  2012-09-04 11:52:19, info CSI 0000003d [SR] full audit
  2012-09-04 11:52:19, CSI 0000003e [SR] Info components check 100 (0 x 00000064)
  2012-09-04 11:52:19, CSI Info 0000003f transaction [SR] beginning verify and repair
  2012-09-04 11:52:24, info CSI 00000041 [SR] full audit
  2012-09-04 11:52:24, info CSI 00000042 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:52:24, transaction Info CSI 00000043 [SR] beginning verify and repair
  2012-09-04 11:52:29, info CSI 00000046 [SR] full audit
  2012-09-04 11:52:29, info CSI 00000047 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:52:29, transaction Info CSI 00000048 [SR] beginning verify and repair
  2012-09-04 11:52:33, CSI Info 0000004a Verify [SR] full
  2012-09-04 11:52:34, CSI Info 0000004 components [SR] b check 100 (0 x 00000064)
  2012-09-04 11:52:34, CSI Info 0000004 c [SR] beginning verify and repair operation
  2012-09-04 11:52:37, CSI 0000004f [SR] Verify Info full
  2012-09-04 11:52:38, info CSI 00000050 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:52:38, Info CSI 00000051 [SR] beginning verify and repair
  2012-09-04 11:52:43, info CSI 00000053 [SR] full audit
  2012-09-04 11:52:43, info CSI 00000054 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:52:43, transaction Info CSI 00000055 [SR] beginning verify and repair
  2012-09-04 11:52:51, CSI 0000005f [SR] Verify Info full
  2012-09-04 11:52:51, info CSI 00000060 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:52:51, transaction Info CSI 00000061 [SR] beginning verify and repair
  2012-09-04 11:52:55, info CSI 00000063 [SR] full audit
  2012-09-04 11:52:56, info CSI 00000064 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:52:56, transaction Info CSI 00000065 [SR] beginning verify and repair
  2012-09-04 11:53, info CSI 00000067 [SR] full audit
  2012-09-04 11:53, info CSI 00000068 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:53, transaction Info CSI 00000069 [SR] beginning verify and repair
  2012-09-04 11:53:05, CSI Info 0000006b Verify [SR] full
  2012-09-04 11:53:06, components of CSI Info 0000006 c [SR] 100 audit (0 x 00000064)
  2012-09-04 11:53:06, CSI Info 0000006 d [SR] beginning verify and repair transaction
  2012-09-04 11:53:14, CSI Info 0000006f Verify [SR] full
  2012-09-04 11:53:15, info CSI 00000070 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:53:15, transaction Info CSI 00000071 [SR] beginning verify and repair
  2012-09-04 11:53:24, Info CSI 00000075 [SR] check complete
  2012-09-04 11:53:24, info CSI 00000076 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:53:24, transaction Info CSI 00000077 [SR] beginning verify and repair
  2012-09-04 11:53:38, info CSI 00000079 [SR] full audit
  2012-09-04 11:53:38, CSI Info 0000007 components [SR] a check 100 (0 x 00000064)
  2012-09-04 11:53:38, CSI Info 0000007 b transaction [SR] beginning verify and repair
  2012-09-04 11:53:52, CSI Info 0000007 d [SR] full audit
  2012-09-04 11:53:52, CSI 0000007e Info [SR] components check 100 (0 x 00000064)
  2012-09-04 11:53:52, CSI Info 0000007f transaction [SR] beginning verify and repair
  2012-09-04 11:53:55, info CSI 00000081 [SR] full audit
  2012-09-04 11:53:55, info CSI 00000082 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:53:55, transaction Info CSI 00000083 [SR] beginning verify and repair
  2012-09-04 11:53:57, info CSI 00000085 [SR] full audit
  2012-09-04 11:53:57, info CSI 00000086 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:53:57, Info CSI 00000087 [SR] beginning verify and repair
  2012-09-04 11:53:59, info CSI 00000089 [SR] full audit
  2012-09-04 11:53:59, CSI Info 0000008 components [SR] a check 100 (0 x 00000064)
  2012-09-04 11:53:59, CSI Info 0000008b transaction [SR] beginning verify and repair
  2012-09-04 11:54:09, 000000 a 9 CSI Info [SR] verification complete
  2012-09-04 11:54:10, 000000aa CSI Info [SR] components check 100 (0 x 00000064)
  2012-09-04 11:54:10, CSI Info 000000ab transaction [SR] beginning verify and repair
  2012-09-04 11:54:11, 000000ad CSI Info [SR] verification complete
  2012-09-04 11:54:11, 000000ae CSI Info [SR] components check 100 (0 x 00000064)
  2012-09-04 11:54:11, 000000af CSI Info transaction [SR] beginning verify and repair
  2012-09-04 11:54:14, 000000 b 1 CSI Info [SR] verification complete
  2012-09-04 11:54:15, 000000 b 2 CSI Info [SR] components check 100 (0 x 00000064)
  2012-09-04 11:54:15, 000000 b 3 CSI Info transaction [SR] beginning verify and repair
  2012-09-04 11:54:19, 000000 b 5 CSI Info [SR] verification complete
  2012-09-04 11:54:19, 000000 b 6 CSI Info [SR] components check 100 (0 x 00000064)
  2012-09-04 11:54:19, 000000 b 7 CSI Info transaction [SR] beginning verify and repair
  2012-09-04 11:54:26, 000000 b 9 CSI Info [SR] verification complete
  2012-09-04 11:54:27, 000000ba CSI Info [SR] components check 100 (0 x 00000064)
  2012-09-04 11:54:27, 000000bb CSI Info transaction [SR] beginning verify and repair
  2012-09-04 11:54:32, 000000bd CSI Info [SR] verification complete
  2012-09-04 11:54:32, 000000be CSI Info [SR] components check 100 (0 x 00000064)
  2012-09-04 11:54:32, CSI Info 000000bf transaction [SR] beginning verify and repair
  2012-09-04 11:54:38, CSI Info 000000 c 1 [SR] full check
  2012-09-04 11:54:38, CSI Info 000000 c 2 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:54:38, CSI Info 000000 c 3 [SR] beginning operation check and repair
  2012-09-04 11:54:42, CSI Info 000000 c 5 [SR] full check
  2012-09-04 11:54:42, CSI 000000C6 [SR] components Info check 100 (0 x 00000064)
  2012-09-04 11:54:42, CSI Info 000000 c 7 [SR] beginning operation check and repair
  2012-09-04 11:54:46, CSI Info 000000 c 9 [SR] full check
  2012-09-04 11:54:47, 000000 CSI Info [SR] this component check 100 (0 x 00000064)
  2012-09-04 11:54:47, CSI Info 000000cb transaction [SR] beginning verify and repair
  2012-09-04 11:54:57, CSI Info 000000dc Verify [SR] full
  2012-09-04 11:54:57, Info CSI [SR] 000000dd components check 100 (0 x 00000064)
  2012-09-04 11:54:57, CSI Info 000000de transaction [SR] beginning verify and repair
  2012-09-04 11:55:08, 000000f4 CSI Info [SR] verification complete
  2012-09-04 11:55:09, 000000f5 CSI Info [SR] components check 100 (0 x 00000064)
  2012-09-04 11:55:09, CSI Info 000000f6 transaction [SR] beginning verify and repair
  2012-09-04 11:55:30, 000000f8 CSI Info [SR] verification complete
  2012-09-04 11:55:31, 000000f9 CSI Info [SR] components check 100 (0 x 00000064)
  2012-09-04 11:55:31, 000000fa CSI Info transaction [SR] beginning verify and repair
  2012-09-04 11:55:42, CSI Info 000000 fc [SR] full audit
  2012-09-04 11:55:42, 000000fd CSI Info [SR] components check 100 (0 x 00000064)
  2012-09-04 11:55:42, CSI Info 000000fe transaction [SR] beginning verify and repair
  2012-09-04 11:55:55, info CSI 00000100 [SR] full audit
  2012-09-04 11:55:55, info CSI 00000101 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:55:55, transaction Info CSI 00000102 [SR] beginning verify and repair
  2012-09-04 11:55:57, info CSI 00000104 [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6000.16386, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2012-09-04 11:56:01, info CSI 00000106 [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6000.16386, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2012-09-04 11:56:01, info CSI 00000107 [SR] this element is referenced by [ml:38 {19}, l:36 {18}] "Windows Foundation.
  2012-09-04 11:56:01, CSI Info 0000010a [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:20{10}]"TCPMon.ini '; source file in the store is also corrupted
  2012-09-04 11:56:01, CSI Info 0000010 c [SR] full audit
  2012-09-04 11:56:01, components of CSI Info 0000010 d [SR] 100 audit (0 x 00000064)
  2012-09-04 11:56:01, Info CSI 0000010e transaction [SR] beginning verify and repair
  2012-09-04 11:56:06, info CSI 00000110 [SR] full audit
  2012-09-04 11:56:06, info CSI 00000111 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:56:06, transaction Info CSI 00000112 [SR] beginning verify and repair
  2012-09-04 11:56:11, info CSI 00000115 [SR] full audit
  2012-09-04 11:56:11, info CSI 00000116 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:56:11, transaction Info CSI 00000117 [SR] beginning verify and repair
  2012-09-04 11:56:24, Info CSI 00000119 [SR] check complete
  2012-09-04 11:56:24, CSI Info 0000011 components [SR] a check 100 (0 x 00000064)
  2012-09-04 11:56:24, CSI Info 0000011b transaction [SR] beginning verify and repair
  2012-09-04 11:56:31, CSI Info 0000011 d [SR] full audit
  2012-09-04 11:56:31, CSI 0000011e [SR] Info components check 100 (0 x 00000064)
  2012-09-04 11:56:31, CSI Info 0000011f transaction [SR] beginning verify and repair
  2012-09-04 11:56:38, info CSI 00000121 [SR] full audit
  2012-09-04 11:56:39, 00000122 CSI info [SR] components check 100 (0 x 00000064)
  2012-09-04 11:56:39, transaction Info CSI 00000123 [SR] beginning verify and repair
  2012-09-04 11:56:45, info CSI 00000125 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6000.16615, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2012-09-04 11:56:49, info CSI 00000127 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6000.16615, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2012-09-04 11:56:49, info CSI 00000128 [SR] this element is referenced by [l:160 {80}] "' Package_37_for_KB943411 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.5.943411 - 110_RTM_neutral_GDR" "
  2012-09-04 11:56:49, CSI Info 0000012b [SR] could not reproject corrupted file [ml:520 {260}, l:72 {36}] '------? "\C:\Program Files\Windows Sidebar"------[l:24 {12}] "settings.ini"; source file in the store is also corrupted
  2012-09-04 11:56:50, info CSI 0000012d [SR] full audit
  2012-09-04 11:56:50, CSI 0000012e [SR] Info components check 100 (0 x 00000064)
  2012-09-04 11:56:50, CSI Info 0000012f transaction [SR] beginning verify and repair
  2012-09-04 11:56:56, info CSI 00000131 [SR] full audit
  2012-09-04 11:56:56, info CSI 00000132 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:56:56, transaction Info CSI 00000133 [SR] beginning verify and repair
  2012-09-04 11:57:05, info CSI 00000135 [SR] full audit
  2012-09-04 11:57:06, info CSI 00000136 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:57:06, transaction Info CSI 00000137 [SR] beginning verify and repair
  2012-09-04 11:57:18, CSI Info 0000013a Verify [SR] full
  2012-09-04 11:57:18, CSI Info 0000013 components [SR] b check 100 (0 x 00000064)
  2012-09-04 11:57:18, CSI Info 0000013 c [SR] beginning verify and repair operation
  2012-09-04 11:57:22, Info CSI 0000013e [SR] full Verify
  2012-09-04 11:57:23, CSI 0000013f [SR] components Info check 100 (0 x 00000064)
  2012-09-04 11:57:23, transaction Info 00000140 CSI [SR] beginning verify and repair
  2012-09-04 11:57:29, info CSI 00000142 [SR] full audit
  2012-09-04 11:57:29, info CSI 00000143 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:57:29, transaction Info CSI 00000144 [SR] beginning verify and repair
  2012-09-04 11:57:34, Info CSI 00000146 [SR] full check
  2012-09-04 11:57:34, Info CSI 00000147 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:57:34, transaction Info CSI 00000148 [SR] beginning verify and repair
  2012-09-04 11:57:42, CSI Info 0000014a Verify [SR] full
  2012-09-04 11:57:42, CSI Info 0000014 components [SR] b check 100 (0 x 00000064)
  2012-09-04 11:57:42, CSI Info 0000014 c [SR] beginning verify and repair operation
  2012-09-04 11:57:51, Info CSI 0000014e [SR] full Verify
  2012-09-04 11:57:51, CSI 0000014f [SR] components Info check 100 (0 x 00000064)
  2012-09-04 11:57:51, transaction Info CSI 00000150 [SR] beginning verify and repair
  2012-09-04 11:57:55, info CSI 00000152 [SR] full audit
  2012-09-04 11:57:55, info CSI 00000153 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:57:55, transaction Info CSI 00000154 [SR] beginning verify and repair
  2012-09-04 11:58, info CSI 00000156 [SR] full audit
  2012-09-04 11:58:01, info CSI 00000157 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:58:01, Info CSI 00000158 [SR] beginning verify and repair
  2012-09-04 11:58:05, CSI Info 0000015a Verify [SR] full
  2012-09-04 11:58:05, CSI Info 0000015 components [SR] b check 100 (0 x 00000064)
  2012-09-04 11:58:05, CSI Info 0000015 c [SR] beginning verify and repair operation
  2012-09-04 11:58:10, Info CSI 0000015e [SR] full Verify
  2012-09-04 11:58:11, CSI 0000015f [SR] components Info check 100 (0 x 00000064)
  2012-09-04 11:58:11, transaction Info CSI 00000160 [SR] beginning verify and repair
  2012-09-04 11:58:16, Info CSI 00000162 [SR] check complete
  2012-09-04 11:58:17, info CSI 00000163 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:58:17, transaction Info CSI 00000164 [SR] beginning verify and repair
  2012-09-04 11:58:20, Info CSI 00000166 [SR] check complete
  2012-09-04 11:58:20, 00000167 CSI info [SR] components check 100 (0 x 00000064)
  2012-09-04 11:58:20, transaction Info CSI 00000168 [SR] beginning verify and repair
  2012-09-04 11:58:24, CSI Info 0000016a Verify [SR] full
  2012-09-04 11:58:25, CSI Info 0000016b [SR] audit 92 (0x0000005c) components
  2012-09-04 11:58:25, CSI Info 0000016 c [SR] beginning verify and repair operation
  2012-09-04 11:58:31, Info CSI 0000016e [SR] full Verify
  2012-09-04 11:58:31, CSI 0000016f [SR] repair 2 Info components
  2012-09-04 11:58:31, transaction Info CSI 00000170 [SR] beginning verify and repair
  2012-09-04 11:58:31, info CSI 00000172 [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6000.16386, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2012-09-04 11:58:31, info CSI 00000174 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6000.16615, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2012-09-04 11:58:31, info CSI 00000176 [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6000.16386, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2012-09-04 11:58:31, Info CSI 00000177 [SR] this element is referenced by [ml:38 {19}, l:36 {18}] "Windows Foundation.
  2012-09-04 11:58:31, CSI Info 0000017a [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:20{10}]"TCPMon.ini '; source file in the store is also corrupted
  2012-09-04 11:58:31, CSI Info 0000017 c [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6000.16615, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2012-09-04 11:58:31, CSI Info 0000017 d [SR] this element is referenced by [l:160 {80}] "' Package_37_for_KB943411 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.5.943411 - 110_RTM_neutral_GDR" "
  2012-09-04 11:58:31, info CSI 00000180 [SR] could not reproject corrupted file [ml:520 {260}, l:72 {36}] '------? "\C:\Program Files\Windows Sidebar"------[l:24 {12}] "settings.ini"; source file in the store is also corrupted
  2012-09-04 11:58:32, info CSI 00000182 [SR] full repair
  2012-09-04 11:58:32, info CSI 00000183 [SR] validation of transaction
  2012-09-04 11:58:32, info CSI 00000187 [SR] check and complete repair operation. All of the files and registry keys listed in this operation were repaired successfully

  Hi Mzvern,

  ·         If she invites only to install Vista Service Pack?

  That Factory Restore is the last step in resolving this issue.

  Follow these steps to see what Windows Update is originally the question or any error message/code:

  a. click Start, type Update in the start search box.

  b. in the list of results, click Windows Update.

  (c) in the left pane, click view update history.

  In the meantime, follow the suggestions below for a possible solution:

  Method 1: I suggest you follow the article and then check if it solves the problem.

  Windows Update or Microsoft Update repeatedly offers the same update

  http://support.Microsoft.com/kb/910339

   

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft article:

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.

  Method 2: For cause of CFS, it wasn't able to repair files of Member, you can follow these steps.

  If the System File Checker tool cannot repair a file, follow these steps:1.At a command prompt, type the following command and press ENTER:

  takeown /f Path_And_File_Name

  For example, type takeown /f E:\windows\system32\jscript.dll.

  2. type the following command and press ENTER to grant administrators full access to the file:

  ICACLS Path_And_File_Name/grant ADMINISTRATORS: F

  For example, type icacls E:\windows\system32\jscript.dll/grant administrators: F.

  3. type the following command to replace the file with a known good copy of the file:

  Copy Path_And_File_Name_Of_Source_File Path_And_File_Name_Of_Destination

  For example, type copy E:\temp\jscript.dll E:\windows\system32\jscript.dll.

  For more information, see the following articles:

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista

  http://support.Microsoft.com/kb/928228

   

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

   

  Let us know the results.

• My windows Vista (sp2) contains updates it refuses to install! Help, please.

  My windows Vista (sp2) contains updates it refuses to install!

  (1) Microsoft .NET Framework 4 on Windows (KB2468871)
  (2) update for Microsoft .NET Framework 4 (KB2533523)
  and
  (3) update for Microsoft Silverlight (KB2617986) this update of Silverlight includes the fixes described in KBs 2604930 and 2617986.
  When I tried to get help via the MS support, I was told that my install Silverlight could be the problem and uninstall all previous versions and install a new one.
  The current version on my machine is 3. something or other (Google Chrome me briefly earlier, but I can't seem to tell me yet again!) He also pointed out that the current version is 5. something or other.  However, I don't know--according to the functionality of uninstall in Control Panel - my version was installed on 21/01/2010 - about 7 months after I got the satellite (a Toshiba). It occurs to me - as it has been ongoing for awhile I fought first to make this thing work and then ignore it (neither of which, it seems, I am able of!)-update Windows is trying to apply can be updated too!
  According to the update of Windows, all three of these updates have downloaded - but I am not sure where...   When I tried to uninstall the old version of Silverlight, Windows Uninstall (via Control Panel) tells me that I need the Silverlight installation disc to go ahead. I've never had one! What can I do? Why these upgrades do not work? It has been for months!  Help, please.
  Colin

  Hello

  • What happen when you try to install updates thoes?
  • You receive an error message during the installation of the updates?

  You can check these links:

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  How to troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation

  http://support.Microsoft.com/kb/906602

• Impossible to reinstall Lightroom 6 retail DVD.  Gives the error message "Windows Vista not supported."

  After a horrible experience with the upgrade of Windows 10, I re-installed Windows 7 Pro and had to reinstall all my programs.  When I try to install the retail DVD of Lightroom 6 version, I got and error message that Lightroom does not support the Vista operating system.  This is NOT Vista; It is Windows 7 Pro x 64 SP with installed updates.  Installation stops there and will not continue!  I then reinstalled my old version of Lightroom 5.2 (who has updated to 5.7) without problem.  How can I bypass the installation process that incorrectly detects Vista?

  Thanks for any help you might be able to give me.  I really miss my 6 LR!

  Hello

  Try to force ambient light Setup to run in Windows 7 mode:

  Right-click on the Setup file and select Properties option.

  Then click on the Compatibility tab.

  The value of the Windows 7 operating system and check.

  This link can also help: try to install lightroom 6 on windows 7 get interface requirement not met windows vista not supported

• I got a new open word doc and is logged when Windows Vista did an update automatically and restart, now I seem to have lost

  original title: lost document

  I got a new open word doc and is logged when Windows Vista did an update automatically and restart, now I seem to have lost! Any suggestions? A system restore wouldn't work?

  If you have not saved the document before the reboot - and Windows always give a lot of warning before restarting automatically - while the file disappeared.  There is no way to recover; System Restore does apply to system files, not data.

• My Window Vista fails to update KB 2533523 and 2468871 KB

  My Windows vista fails to update CB25335223 and KB 2468871 several times already.  I tried to update menually via the microsoft Web site, but he did not find these two updates?  What should I do?

  Hello

  1. what happens when you try to install updates?

  2 are you able to install some other updates?

  3. do you get an error message?

  Method 1: Put the computer in a clean boot State before updates

  Note: After installing the updates, follow step 7 in the link provided to return the computer to a Normal startupmode.

  Method 2: Temporarily disable any security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Download and install the 1 kb/2533523 for the .NET Framework 4 reliability update

  http://support.Microsoft.com/kb/2533523

  Download and install the update kb/2468871 for the .NET Framework 4.

  http://support.Microsoft.com/kb/2468871

• during the windows vista pack 2 update my antivirus will become obsolete?

  during the windows vista pack 2 update my antivirus will become obsolete?

  Hi victor,

  It would be useful to know the name and the version of the antivirus program that you use. However, in general (and frankly I can't think an exception) upgrade Vista SP1 to SP2 will not make your out-of-date antivirus.  In fact, it will improve the overall security of your system.  But just to be on the good side, I suggest that you update your AV software once you have completed the upgrade to SP2 and installed all the additional Windows updates which will become available once you do this (and you may need to run a few times to get everything as some may be presented until others have been installed).

  If you want suggestions of security software, please post your version of Vista (e.g., 32-bit Vista Business) as well as the names and versions of any software security you are currently using or have used or had installed even if you've never used (and when the definitions for the software in use have been updated).  These suggestions will be excellent and work well together (even if you can not install two AV programs at the same time, these are not all the AV programs but still aid in the detection and removal of malware, viruses and spyware.  And they are all completely FREE - nothing we suggest will not cost you even a penny and that they will be as good if not better that people pay money to get the bits.

  I hope this helps.

  Good luck!

• Windows Vista not sign out or close

  Windows Vista not sign out or close. Act as if it were in a loop continues.

  Hi Hogup,

  1 when was the last time it was working fine?

  2. did you of recent changes on the computer?

  3. you receive an error message when you try to close session or shut down the computer?

  4. the computer is in a continuous reboot loop?

  Method 1

  Check and make sure that the settings here are correct on the computer.

  Change the Sleep button to become a button stop by following these steps:

  (a) click the Start button

  (b) click on Control Panel

  (c) switch to Classic view on the left

  (d) double click on power options

  (e) identify the power plan, then click on "Change Plan settings".

  1. click on change Advance power settings

  (f) under the list, click 'buttons and lid of power '.

  2. click on 'Start Menu Power' the default setting is sleep.

  (g) sleep-click and choose Shut Down

  Method 2

  If the previous step fails, consult in the clean boot state.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• During the installation process of 6 of Lightroom, I get a box that says: Windows Vista not supported.  I have Windows 7 with Service Pak1. I meet all the other requirements listed.

  During the installation process of 6 Lightroom, I get a box that says 'Windows Vista not supported'.  I have Windows 7 with Service Pak 1.  I meet all the other requirements listed.  Any ideas?

  Hi Chuck,

  You can check out the link below.

  trying to install lightroom 6 on windows 7 continues to receive operating requirement not met windows vista not supported

  Hope this will help you.

  Kind regards

  Hervé Khare

• Requirement of operating system do not met! Windows Vista not supported!

  Requirement of operating system do not met! Windows Vista not supported!

  MINIMUM requirements for programs of cloud... scroll down and check each program

  -http://helpx.adobe.com/creative-cloud/system-requirements.html