Windows vista ultimate bulid 6000 is not enabled

Similar Questions

• Windows Vista Ultimate 64-bit will not be in service

  Windows Vista Ultimate 64-bit will not be in service.

  I read the other posts and have followed the suggestions. Windows does not start without failure, or any other option in the F8 boot options. Next step is to create a disk to repair windows, Dell did not provide a when the computer was purchased. Can work from any vista repair disc, or I need to find one suitable for my windows edition? Where are these on the Microsoft Web site?

  Thank you!

  Thanks for the help. Sorry for the vague information. I was finally able to diagnose memory problems. I have reset the chip memory and repaired the computer by using the option "repair your computer" F8.

  Once again, thank you for the help.

• Windows Vista Ultimate Edition will be not updated from Windows Update

  Why these updates does not apply to Windows Vista Ultimate Edition?

  KO 2378111

  967723 KB

  KO 2345886

  KO 2443685

  KO 970430

  972145 KB

  Here's an overview:

  http://jumbofiles.com/016cdbch2nb7/updateservice.PNG.html

  In addition, why Vista Ultimate load individually all these individual language packs? The other 32 options. How can I disable them?

  Q: is this computer belong to you or...?
  A: my client

  It is a specific consumer support forum. You will find appropriate assistance in what IT Pro forum-online http://social.technet.microsoft.com/Forums/en/itprovistasecurity/threads

• Windows Vista Ultimate: SP1 CD can not install for me to Dual-Boot 7 and Vista

  Hi I'm new here.

  I have Windows 7 Ultimate on my computer. I have 3 drives, F: reserved system, C: (where Windows 7 is on) and blank D: 20 GB Partition.

  I am trying to install Windows Vista, so I can dual-boot, but I get an error code saying that there is not enough disk space on my F: reserved system, but I try not to install it since their, I try to install from the D: drive.

  So I tried another way, I Booted from the CD, and Setup continues. But, when I clicked on my D: drive it says it cannot copy files when going from 3%.

  Question:

  1. I did a wiped fresh clean installed Windows 7 Ultimate, and it created a partition of 100 MB. What's causing Windows Vista to install correctly?

  2. If Question 1 was the problem, do you think I should wipe my entire C: drive and erase the entire disk for Windows Vista to fix itself?

  Thank you

  New Member.

  I found the problem:

  System reserved (f) had to be removed... (:

• Windows Vista Ultimate Media Center does not work

  Hello world

  When I open media center units it stops down in a few seconds indicating "...". has encountered a problem and must close. ». This happens every time. I am running Vista Ultimate SP2, latest drivers etc. I ran sfc/scannow as suggested in another post and also a reconstruction of the MC data store also proposed; with the same result.

  The only journal entry for MC's: MCUpdate ends at 2009-05-29 17:47:16

  Please can someone help, I upgraded to ultimate business so I have a MC, and he never worked :(!

  Thank you very much
  Wayne

  I SOLVED THE PROBLEM - it was some DivX Codecs that have been installed. I uninstalled all DivX and now it works YAY!

• Vista Ultimate 64 bit will not be in service

  Windows Vista Ultimate 64-bit will not be in service.

  I read the other posts and have followed the suggestions. Windows does not start without failure, or any other option in the F8 boot options. Next step is to create a disk to repair windows, Dell did not provide a when the computer was purchased. Can work from any vista repair disc, or I need to find one suitable for my windows edition? Where are these on the Microsoft Web site?

  Thank you!

  Hi 1357ace,

  Take a look at the answer in thisthread by Michael Murphy. Michael both SpiritX provide good information to do a disk repair and troubleshooting more.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• No sound on my Dell Inspiron 6000 when I updated to Windows Vista Ultimate

  original title: no sound on my Dell Inspiron 6000 went I've updated for Windows Vista Ultimate Edition

  I tried Microsoft solve this problem, that don't work, I want to Dell website and download the diver who don't work not "so I wonder if I con help."

  Hello

  Step 1: Try to update the drivers for sound card via windows update.
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

  Step 2: Download windows XP drivers for sound card and install it in compatibility mode.
  Reference:
  http://support.Dell.com/support/downloads/DriversList.aspx?c=us&l=en&s=Gen&OS=WW1&OSL=en&SystemID=INS_PNT_6000&CATID=-1&impid=-1
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-program-compatibility

  You can also try to contact Dell support for assistance on this issue team.
  http://en.community.Dell.com/
  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us?c=us&l=en&s=Gen

• I am unable to have Firefox remember passwords. The 'KEY' icon which is supposed to be on the left side of the address bar is not there. Windows Vista Ultimate Edition, Firefox Version 9.0.1

  I need to have Firefox remember passwords. When I go to 'HELP' to get the instructions to do this, I am told to click on the 'KEY' icon on the left side of the address bar. But there is no icon.
  Windows Vista Ultimate Edition, Firefox Version 9.0.1
  I could use some help, thanks.

  Make sure that you are not Firefox running in permanent private browsing mode.

  • https://support.Mozilla.org/KB/private+browsing

  To view the history settings and cookies, choose:

  • Tools > Options > privacy, choose the setting Firefox will: use the custom settings for the story of
  • Uncheck the box: [] "always use the navigation mode private.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode

  See also:

  • http://KB.mozillazine.org/User_name_and_password_not_remembered

• Windows Vista Ultimate does not install on Satellite M40

  Windows Vista Ultimate settles not on this laptop. Vista hangs after the installation and does not start. Someone knows what's the problem?

  Hello

  As mentioned above the hardware of the laptop must be compatible and must be able to manage the Vista. The M40 is certainly not Vista capable
  But I have installed Vista on the A50 and this laptop is no longer able to Vista but I upgraded the RAM and HARD drive and it works.
  Of course, the many features of Vista like Aero don t run but I was able to install it.

  Maybe the BIOS is not compatible with Vista! It is possible

• has ran windows (vista ultimate) update and then find that my ipod is not recognized by windows or itunes

  ran windows (vista ultimate) update and concluded that my ipod not recognized by itunes or windows, can anyone help?

  Hi BRIANMOODYRU

   

  You can view the articles below and check out them if the steps to help you resolve the issue-

  http://support.Apple.com/kb/TS1538

  http://support.Apple.com/kb/TS1496

  If you need assistance, you can also consult resources and specific apple. You can get in touch with the community of Apple or the support Web site for additional assistance on the issue:
  http://discussions.info.Apple.com/index.jspa
  OR http://www.apple.com/support/

   

  I hope this helps.

• Windows Vista Ultimate Edition will not be upgraded to Windows 7

  Windows 7 Upgrade says he cannot directly upgrade Windows XP, duh?  I ran the Upgrade Advisor before running the upgrade software and did not get this stupid message. I get only when the software upgrade performs its checks.  I am running Windows Vista Ultimate Edition with all updates to September 24, 2013.

  Which edition of Windows 7? It matches the edition of Vista you are trying to upgrade to?

  When important changes to your computer, for example an upgrade, it is always recommended that you back up your system before installing a new version of Windows. In your case, you can upgrade to Windows 7 depending on the edition and the architecture of Windows Vista, you have installed. If you are running a 32-bit version of Vista and upgrade to a 64-bit (Windows 7 edition) version, you'll have a pure make install, it is the opposite case.

  If you are using Windows Vista Home Basic or Premium consumer editions, you can only upgrade to Windows 7 Home Premium or Ultimate. In addition, you can make downgrades, which means, if you are running Windows Vista Ultimate Edition now, you cannot downgrade to Windows 7 Home Premium. You perform logical upgrades:

  Windows Vista Home Basic > Windows 7 Home Basic, Premium or Ultimate

  Windows Vista Edition Home Premium > Windows 7 Home Premium or Ultimate

  Windows Vista Business > Windows 7 Professional, enterprise or ultimate edition

  Windows Vista Business > Windows 7 Enterprise

  Windows Vista Ultimate > Windows 7 Ultimate.

  http://www.notebooks.com/2009/10/07/how-to-upgrade-to-Windows-7/

• How can I restore my empowering technology from acer asire Home premium back to factory with a recovery disk? All the factory settings have been destroyed, and windows vista ultimate sp1 has been installed on my computer.

  I have an acer aspire 4720z / with windows vista home premium / with the enabling technology / processor intel pentium dual core. I think I downloaded a program limewire lennex, it was suppose to be something else. Somehow that he closed my computor, luckly my cuzin was able to download windows vista ultimate SP1 64 2007 multimedia content on my laptop so that I can at least use MY COMP. But I think I like the version that is installed on my comp.better to the ultimate version on my comp.now, it does not seem as before prefome. Some things on my computer laptop don't prop wk. What should I do, go back to my version Home premium of moose? If so how to do that? I don't have a home premium recovery disc. I tried to install the updates of windows SP2 64 thought repairs that would set back 2 the origonal but settings it na not or at least update the ultimate version do you think I should do.

  If you have downloaded Vista Ultimate and not bought, you use pirate software.

  You will receive NO Support for pirated software.

  If this does not work, contact Acer:

  http://www.acerpanam.com/Synapse/forms/portal20.cfm?RecordID=853&formid=3390&website=AcerPanAm.com&siteid=7117&words=all&keywords=&areaid=2

  Acer eRecovery made

   

  1. on the Acer splash screen, you can press Alt and F10 (at the same time press F2 to enter the BIOS) to make it appear a version BACK style eRecovery.

  ·        The unit is able to reload Windows from this mode faster then CD.

  ·        The default password is 000000 (6 zeros) and it is shown when you are prompted for the password.

  ·        Users are able to change the password in this mode for eRecovery only.

  ·        The system can retrieve the hidden on the hard disk (partition PQService) image or a CD/DVD media.

  ·        It is possible to reload the factory CD/DVD style or snapshots that creates the eRecovery Windows version.

  2. in Windows, there are 3 ways to access eRecovery functionality.

  ·        Press Alt and F10

  ·        Open Acer eManager and then double-click eRecovery.

  ·        When a system is new it should automatically open this application and invite you to do the recovery media.

  3. the Windows version of the eRecovery program is stronger then the Dos Version. Below you will find the various features of the Windows version:

  Recovery settings: create backup files and change password

  ·        Picture of the backup snapshot (create a disk image of your system configuration)

  1. the system is able to make a CD/DVD image of the current state of mobile software including customer programs installed.

  2. This CD/DVD is usable in Windows and DOS of the program version.

  3. the drive should start, but isn't always.

  4 when a snapshot is in fact the image is on the D: partition and then can be burned to disc if eRecovery is said to.

  ·        Burn the Image to disc (create a backup disk)

  1. you can create 3-7 CD or DVD 1-2 such as those that were sent with the units before eRecovery.

  2. the serious CD are equal in usage to the system recovery CD and CD

  ·        Remove data from backup image of capture instant user (if available)

  1. This is how delete you the snapshot on the D: partition images

  ·        Password: (change the eRecovery password)

  1. measures: restore your system using an existing backup file or restore the default configuration in your system factory.

  2 backup copy using one of the snapshots has been filed or the original image on the D: partition.

  4. made eRecovery

  ·        When the hard drive is replaced the system loses its characteristics eRecovery. These features are on the hard drive and cannot be reinstalled.

  ·        When reinstalling from the CD/DVD's you will lose the eRecovery program but the DOS version can still function, as if uninstalled, you can not reinstall.

  ·        eRecovery uses Ghost (as well as the use of our recovery CD) to create snapshot images.

  ·        If the PQService partition is removed using fdisk or a utility under Windows, you may need to reinstall Windows.

  ·        If the system is recharged using the DOS version you retain the eRecovery feature

  Mick Murphy - Microsoft partner

• I got my windows vista ultimate administrator standard user account.

  I got my windows vista ultimate administrator standard user account. Now whenever I try to update or install "User Account Control" is constantly asking me to (type an administrator password, and then click OK). The problem is that I can't do this because OK is disabled (grayed out) and no place to type the admin password or the other. How to restore this administrator account or even to enable the local administrator account by default here?

  Hello

  If you have another administrator user account on your computer then log in and change the account to standard user for the administrator account.   If not, then follow the steps from the link and check if that helps: how to use system restore to log on Windows 7 or Windows Vista when you lose access to an account http://support.microsoft.com/kb/940765/en-us

• Installation to upgrade Windows Vista Ultimate Service Desk on a pc Home Premium

  The bad news is, my sweet 3 year old 32-bit HP laptop (under home Premium), is dead, disastrously, this morning, after which a critical backup has not... my head turns... The GOOD news is that now I have the ability to clean install my new "Windows Vista Ultimate SERVICE DESK Upgrade"... Unfortunately... I can't understand... It won't let me "ipgrade" even on a restored factory pc... I counted "clean install", but am completely confused by the options window (& or not I'm sure using this software...) I checked before I bought & used to say that it works very well on this laptop...) ... In any case, I get the window & the following choices: * "Disk 0 Partition #1 (C) - Total size 221,1 GB, free Go 186,3 > & > * '0 Partition 2 HP Recovery Disk' - Total Size 11.8 GB, free space 1.4 GB / / / I do not understand the partitions or anything on this operation & need instructions...» I KNOW that this software is SUPPOSED to work properly... & of course, I don't want to go without it... NEXT disaster, I need the ULTIMATE cigarette back... / / / is there someone who understood? I can't draw conclusions, or analyze what all the... Thanks in advance for any help...

  Hello

  you do the upgrades within an operating system running and enabled

  Reinstall Home premium and then upgrade to ultimate

  and do NOT touch or modify this HP Recovery partition

  who is there to put your computer to how you bought it if necessary

  you press F11 on startup to start the process of recovery from him and then follow the prompts

• 26 of Firefox crashes out of Windows Vista Ultimate 32-bit.

  No matter if I click on the red X, go to file-> exit or press Alt + F4 to exit Firefox under Windows Vista Ultimate 32 - bit. It almost always produces an error message that Firefox has stopped working.

  I can't find how to post a JPEG Screenshot of the error here.

  This will not occur under Windows XP Pro.

  Otherwise, the browser works fine in a BONE.

  Those are the two reports of the crash on Adobe Flash Player.

  You can check for problems with the latest version of the Flash plugin and try these:

  • disable an eventual extension of the browser for Firefox Plugin RealPlayer Record and if installed RealPlayer update
  • Disable protected mode in the plugin Flash (Flash 11.3 + on Windows Vista and later versions)
  • turn off hardware acceleration in the Flash plugin
  • http://KB.mozillazine.org/Flash#troubleshooting