Windows Vista update: STOP 0x0000007b on crcdisk.sys

I tried to apply the patches via Windows Update February, twice, twice completely streaked my Vista installation.

What happens is that Windows Update downloads updates and application restart. The restart ends at STOP 0x0000007b.
If I then boot in safe mode, I can see the boot process stop for about a minute with crcdisk.sys displayed, followed by the BSOD.
The parameters are: STOP 0x0000007b (0x0c0000000e, 0 x 000000000, 0x080399bb0, 0 x 0000000).
This happens both to the normal boot and safe, so the only solution I found was to reimage the computer.

I have on my firewall on the computer 1, 2 anti-virus and 1 products anti-intrusion and surf using Firefox with several security extensions, so I guess that my computer is not infected.

Ideas patch that is responsible for the problem and how to avoid it?

However, I am not infected with rootkit Alureon, I have set my computer with Avast, Malwarebytes, McAfee and Spybot S & D scan.
So I doubt rather requests above that Alureon is the sole cause of the BSOD.

Rootkit TDSS [AKA Trojan W32/Alureon] has silently the net

TDSS rootkit 3rd variant is the last member of the Tdss rootkit family that is spreading quickly all over the world. While a number of rootkits is just developed as a proof of concept, this is not the case. TDSS rootkit is well known corporate antivirus because of his goal to get full control over the infected computers and to use them as zombies for its botnet.

During these years, that he has always shown a team of skilled people behind it, which always applied advanced techniques often able to bypass antirootkit software. In fact, this last Variant can be easily named as the stealth rootkit in the wild.

This infection is having all the best of MBR rootkit, the best of the Rustock.C and the experience of the old Tdss variants. The result is an infection that spreads quickly on the net and it is not detected by almost all security software and 3rd party anti rootkit software. [emphasis]

.. [20 Nov-09] terms no antirootkit is able to bypass disk filtering technical used by Tdss rootkit but, even if it were possible, this rootkit could not be detected by file size cross check because the size of infected files and original file are exactly the same.

http://www.prevx.com/blog/139/TDSS-rootkit-silently-owns-the-net.html

~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

Tags: Windows

Similar Questions

  • Windows vista update 3 of 3 will not set up, computer continuously, stop and restart; Unable to access computer

    Windows vista update 3 of 3 will not set up, computer continuously, stop and restart; Unable to access computer

    The link below has options to solve your problem of loop.

    http://support.Microsoft.com/kb/949358>

    04:17:0407/17/11

  • Windows vista updates crashes reboot

    Hi, I've had my laptop windows vista for Christmas 2007 business and recently not installs the regular update of windows. The update appears on the home screen and I install, after the instalation it asks me to restart my computer when it restarts do the usual step 1 of 3%, but the updates don't seem to be mounting to and it comes up with one may appear saying "service pack do not have. Restoration of the changes. Do not turn off your computer"so I left it for about 4 hours and it still says the same message! then I turned off my laptop by pressing the power button and when I turn it back appears with the same message and I can't get on my laptop! My laptop is on and is now always show this message! Help, please!

    * Title *.
    Windows vista updates do not work

    claired8,
    Start by going through this article, then post back with the results.
    Vista update stops at stage 3 of 3 Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • display driver intel graphics accelerator driver for windows Vista (r) stopped responding and has recovered?

    I recently formatted my laptop (fujitsu siemens) and she ALWAYS had windows 7 installed inside. However, since I formatted, sometimes white people just screen out and I get the message:

    display driver intel graphics accelerator driver for windows Vista (r) stopped responding and has recovered?
    Any ideas what could be going wrong?

    Update all the drivers on Fujitsu support site, for your model

  • can not find platform for windows vista update

    my computer does not find the platform for windows vista update and I can't find anywhere to download from. Help! is there anywhere I can download that has not removed?

    Only-how to get updates of platform for Windows Server 2008 and Windows Vista Windows Update the platform update for Windows Server 2008 and for Windows Vista platform update can be downloaded from Windows Update. To obtain these updates, follow these steps:

    1. Click Start, click all programsand then clickWindows Update.
    2. In the navigation pane, click check for updates.
    3. When updates are found, click view available updates.
    4. Select the package to update that you want, and then click install.

    http://Windows.Microsoft.com/en-us/Windows-Vista/change-how-Windows-installs-or-notifies-you-about-updates

    To get the updates recommended for your computer and important, underRecommended updates, select the include updates in downloading, installing, or informs me of the box put up-to-date recommended.

    You check parameters WU to ensure that you get a list of bottlenecks and recommended.

    Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

  • Windows Vista updates (12 April 2010) broke all the desktop shortcuts

    On 13 April, I fist notice this problem. I managed to it is resolved according to restore my computer to a previous point prior to the windows vista update have been installed. I didn't create a new restore point and also forgot to uncheck "automatic installation of windows. A few days later, the same problem after updates have been installed again on April 15. Unfortunately, this time I don't have a restore point previous April 15. So, I restored it on next day 16, but not resolved the issue. So I uninstall all vista windows update installed on April 15 but did not help either.

    Fortunately it affects only an admin user (user account that run windows update) all users are very well.

    Any suggestions to solve this problem, much appreciated.

    Kind regards

    lmaestro

    SOLVED. It is a Virus. A villain. For more information, see URL below:

    http://social.answers.Microsoft.com/forums/en/vistaprograms/thread/039ceca1-c81f-4136-8c04-bf13c0378495

    I followed the comments posted by "lilvtboiraver" about the "Regetry Exchange" and it solved this problem.

    Thank you

  • I'm Zenith one 733F error Code when I try to install Windows Vista update to SQL Server 2005 (Service Pack 2 KB970895).

    I'm Zenith one 733F error Code when I try to install the latest Windows Vista Update, which is an update to SQL Server 2005 (Service Pack 2 KB970895).  This update has failed several times now.

    I followed the advice given in a separate post in this forum at Ramer49 to perform a selective startup with msconfig to try to run the update with all Microsoft Services disabled.  This does not solve the problem.

    I spent reviewing the logfile under C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\SQL9_Hotfix_KB970895_sqlrun_sql.msp.log.  The problem highlighted is that the Services of Services SQL2005 database program did not start.  Here is an excerpt from the log file...

    Product Installation status
    Product: SQL Server Database Services 2005 (MSSMLBIZ)
    (Previous) product version: 3077
    Version of the product (Final):
    Status: failed
    Log file: C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\SQL9_Hotfix_KB970895_sqlrun_sql.msp.log
    SQL Express features:
    Error number: 29503
    Error description: error MSP: 29503 The SQL Server service could not start. For more information, see the

    I tried to run the problem file (SQL Server MSSMLBIZ) directly by using the Windows administrative tool, but the file does not seem to start successfully.  Event Viewer log contains an error with event ID = 823.

    I don't know what to do next.

    Can someone help me?

    Thank you.

    Take a look at this link as it covers a way to fix this problem. Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows Vista update runs continuously

    Update of Windows Vista has not been completed since mid July 2016. Manual start and it works continuously without finding anything or finishing, I read on internet to clear the cache I've done (loss of the history of the update), but this does not resolve the question can someone move me to a solution that works?

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-update/whats-going-on-with-Windows-Vista-updates/bc5e2d48-a4ba-4BA0-846f-f762f1f0c1a0

  • Windows vista update 80246008 error code

    Windows vista update 80246008 error code

    You must be logged in as an administrator to perform these steps.

    If you receive Windows Update 80246008 error when downloading updates, you might need to change the (BITS) Background Intelligent Transfer Service or the Windows event log service settings and restart each service.

    To change or restart the Service (BITS) Background Intelligent Transfer

    1 open administrative tools by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.

    2. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    3 right-click the Background Intelligent Transfer Service (BITS) service and then click Properties.

    4. under the tab general , next to Startup type, make sure that Automatic (delayed start) is selected.

    5. next to Service status, check whether the service is started. If not, click Start.

    To change or restart the Windows event log service

    1 open administrative tools by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.

    2. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    3. right click on the Windows event log service and then click Properties.

    4. under the tab general , next to Startup type, make sure that Automatic is selected.

    5. next to Service status, check whether the service is started. If not, click Start.

    If the problem persists after you follow the steps above, go to the Windows Update Support Center website to request support by e mail. https://support.Microsoft.com/OAS/default.aspx?Gprid=6527&St=1&wfxredirect=1&SD=GN>

    OR

    Try here and see if Russell Pope is available, if not, try another available technology.

    http://supportservices.Microsoft.com/support/services/windows_update>

    UTC/GMT is 10:53 on Sunday, December 25, 2011

  • Error Windows vista update 9 c 48 during the installation of Internet Explorer 9

    Original title: windows vista update 9 c 48 error

    I tried several times to run the update that was trying to install internet explorer 9, but kept getting error 9 48

    May I ask why?

    Hello

    1. are you able to install the updates without any problems?

    Method 1: Please follow the steps described in the article mentioned below.
    Solve the problems when you can't install Internet Explorer 9:
    http://support.Microsoft.com/kb/2409098

    Method 2: If the above method does not work, follow the steps listed in the article below.
    How to install or uninstall Internet Explorer 9?
    http://Windows.Microsoft.com/en-us/Windows7/how-do-i-install-or-uninstall-Internet-Explorer-9

  • Problems with Windows VISTA update (error code: 9 c 47 of the 800070002, D 80024200)

    original title: problems with Windows VISTA update

    I'm using Windows Vista (SP2). Windows update is not able to update the following updates on my system. Whenever I get these error messages.

    1. 9 47 code
    2. Code 800070002
    3. Code D 80024200.

    Is there a resolution to do the same thing?

    Hello

    Did you change your computer?

    I suggest you to follow the methods and check.

    Method 1:

    Problems with installing updates

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

    Method 2:

    If you have installed a security software on the computer, then I suggest you try to disable temporary and check to see if the same problem happens. Make sure that you enable security software back once the diagnosis is made to prevent the computer from virus attacks.
    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

    Method 3:

    How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

    http://support.Microsoft.com/kb/947366

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  • Windows Vista update KB 2492386, 8007020 error Code

    Windows Vista update KB 2492386 attempted to install more than 75 times. The failure of this update to install disabled program Amazon Games & Software Downloader which I have been unable to repair or reinstall. Error code 80070020. I tried every fix I found on Microsoft, and I don't know what to do next.

    Problems with the installation of the updates Windows can occur when Windows Update and another program both try to access the same file. Although many programs may cause this problem to occur, the most common are antivirus programs and perform backups in real time of the file system.

    Try a clean boot, and then install the update.

    http://support.Microsoft.com/kb/929135
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  • How to make windows vista updates Pack 2 cost?

    How to make windows vista updates Pack 2 cost?

    Hello Victorchow,

    If you are referring to the update of Windows Vista service pack 2, then the answer is free. It should have automatically downloaded to your PC via Windows updates.

    You can download it from this link: http://www.microsoft.com/downloads/en/details.aspx?FamilyID=a4dd31d5-f907-4406-9012-a5c3199ea2b3&displaylang=en

    This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

    John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

  • Windows Vista update (April 1, 2011) now the computer will not boot.

    1. Windows Vista update (April 1, 2011) now the computer will not boot.  Love updates been invited but now computer does not start. Just gets up to a certain point, and then restarts. Impossible to start safe mode! Don't know what to do, please help!

    Hi Ema1976,

    Do you have an error message when you try to start?

    Step 1: Disable the automatic restart of the menu advanced startup options and then enter the error message, see the link below:

    Advanced-Startup-options-including-safe-mode

    http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

    Step 2: Follow the steps mentioned in the link below to access system recoverytools and run the Startup Repair tool again.

    How to access the System Recovery Options menu?

    Run the tool to restart system as shown in the link below
    How to use Startup Repair?

     

  • Windows Vista update: platform supplement for Windows Vista update: KB2117917-french

    Hello, first of all, thanks to anyone who can help me!

    I have problems to install the platform update Supplement for Windows Vista update: KB2117917-french, who keeps trying to update automatically when you start computer.

    Basically, what happens is I turns off my computer and it will update first before turning itself off. I then come back on and it will start installation of finish 3 steps. After 100% on the last screen of the stage becomes black and restarts. As his departure upward, it goes to a black screen and it says something about registry 0/621 or so then he load some files. THEN it goes black again and restart once more.

    This time, it goes to the screen similar to where it puts up-to-date, except it says return update, and then my windows loads very well.

    It's a constant loop and I really need help. I tried the system restore, but I had not all dates really old to restore, and the older that I could do has not solved the problem.

    Again, any help would be appreciated. ^_^

    Hello, first of all, thanks to anyone who can help me!

    I have problems to install the platform update Supplement for Windows Vista update: KB2117917-french, who keeps trying to update automatically when you start computer.

    Basically, what happens is I turns off my computer and it will update first before turning itself off. I then come back on and it will start installation of finish 3 steps. After 100% on the last screen of the stage becomes black and restarts. As his departure upward, it goes to a black screen and it says something about registry 0/621 or so then he load some files. THEN it goes black again and restart once more.

    This time, it goes to the screen similar to where it puts up-to-date, except it says return update, and then my windows loads very well.

    It's a constant loop and I really need help. I tried the system restore, but I had not all dates really old to restore, and the older that I could do has not solved the problem.

    Again, any help would be appreciated. ^_^

    Hey Urdethismylife

    Try the repost in the forum for this windows update

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    Walter, the time zone traveller

Maybe you are looking for