Windows will ask drivers during the installation of Windows 7 Pro on samsung SSD 950

Similar Questions

• During the installation of Win - xp pro vmware error 10 as mentioned below

  During the installation of Win - xp pro in 10 vmware, it is showing "OPERATING SYSTEM IS NOT FOUND" how to solve. I scoured the file .iso record and properly connected to all readers. Help me solve this problem.

  I think you'd have better luck if you go to the website of VMware support.

  http://www.VMware.com/support.html

• How do I install the drivers during the installation of windows 7

  I did an install home premium windows 7 dvd by burning a file .iso I downloaded on a dvd and I am facing problems installing drivers. I extracted the drivers on an external hard drive and installing windows 7 they ask me about the drivers before installing windows.
  I have all the drivers in the external hard drive but I tried several times to install them using the button browse and locate the folder that contains every driver and install it alone, but his does not work. So is there a better way to install the drivers?
  Thanks in advance

  Hello

  During the clean install of Windows 7, users are generally required to install a few drivers for the internal hard drive. These drivers must be written to a DVD disc / USB key and installed when prompted.

  In this case, I believe, is that you are trying to install the wrong drivers. The installation requires the internal hard disk drivers. This driver will depend on the configuration of the internal hard drive (RAID, SCSI, etc.).

  Another possibility could be that other equipment are not properly recognized by Windows 7 installation. You try to install Windows 7 and burn the ISO on a USB bootable and start the computer to the top of this USB key. Here's how you can do:

  http://www.microsoftstore.com/store/msusa/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  If, during this installation, you get an error saying that a required CD/DVD or USB driver is missing on the computer, you might see the message marked as answer in this thread.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/a-required-CDDVD-device-driver-is-missing-USB/61eda679-66cc-4512-B175-d02871394461

  Please get back to us with the State of the question.

• The installation program will stop Message during the installation of CS3

  I get 'the installation program stops running Message' after disc 1 ends and ask disc 2 when I try to install CS3 Master Collection.  This is new Dell Vostro 270 s PC with Windows 7 Professional, which replaces a HP Windows 7 Home Edition. CS3 ran OK on the HP.  Suggestions?

  So please try to download a new copy of the installation files.  What to ask a second disc indicates he has difficulties to locate the required installation files.  With the download, you will have all the files installation in one place and it will be not necessary to insert the CD.

• LV 2011: How to load drivers during the installation of downloads (not disks)?

  Hello-

  I tried to install LV 2011 and the RT and FPGA modules in the files to download on the Web site of NOR.  At the end of install it the two LV and real-time Module development system, I get the following message:

  

  I don't have a CD of drivers available.  I have the Drivers\Aug11\Products of device OR downloaded from OR or folders, but cannot get the prompt above to recognize anything in this hierarchy as a legitimate target.  What is the right way to proceed here?

  By context, I hope that that this issue will shed light on a problem I had simulating a cRIO chassis, as I've described here:

  http://forums.NI.com/T5/LabVIEW/no-option-to-simulate-cRIO-device-after-installing-LabVIEW-and/m-p/1...

  Thank you guys a lot.

  Simply choose "later." When you start the installation, just choose the option not to install device drivers (there is an option there).

  Then, download and install the drivers concerned. For modules FPGA and RT, which will be the OR-RIO driver you can download.

• I can't install winndows 7. He said something GBT will not restart during the installation. Why?

  The installation runs, but when it's time to restart, it crashes right there with the colors of windows list.

  Give an err msg saying 'something' is no help

  I assume you are using a disk partitioned GPT, reading: -.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/how-to-clean-install-Windows-7-Professional-64-bit/c052117c-8FAA-4B5B-bd31-30bb9b21a0eb

• How to load the SATA drivers during the installation of XP - Satellite L40-18 X?

  Hello

  I have Toshiba Satellite L40-18 X with Vista Home OS. Now, I want to install Windows XP, I know that I have to reinstall the SATA drivers, but I can't find USB-drive floppy-disk drive.

  I was wondering can I install these drivers of some other player, like a flash drive or external CD ROM

  Thanks in advance

  Hello!

  There are two options to load the SATA drivers.

  As you know to load from a floppy drive, but if you n t have one, this isn't a problem.

  Create your own Windows disk with nLite. nLite is a tool of suppression of configuration and Windows components before installation of your choice, but you can also integrate drivers, service packs, the settings and to this day.
  It s a very nice tool and its freeware.
  Here you can download and read how to create a disk:
  http://www.nliteos.com/

  Good bye

• During the installation of Panda AV Pro 2011 a box with the message below shows. And Setup stops. Why?

  Feature: NT
  Component: ResidenteFicherosNTPAV
  File: C:\windows\system32\pav\
  Error: Access is denied.

  The Panda Forums are listed below:
  http://support.pandasecurity.com/forum/viewforum.php?f=41&SID=c5bdef41a00b36c9f33b8fdf32982840

  Until they are better able to deal with this problem.

  Thank you

  Marilyn

• tried to install a new copy of Windows XP Home. Everything is OK until the final phase, when the "blue-screen" appeared during the installation of the drivers.

  Installation of xp and blue screen of death

  Hello

  I recently formatted the partition boot and recovery of a laptop Medion2230, then merged the two partitions in a single NTFS partition.  Don't ask why, it's a long story.

  Then, tried to install a new copy of Windows XP Home.  Everything is OK until the final phase, when the "Blue Screen of death" appeared during the installation of the drivers. Restarted and installing XP as normal to repeat the first onboard staged and went to the "blue screen" at the same point as before.

  Using some diagnostic software, I reformatted the drive again, loaded XP set up and I had the same problem.

  Someone knows what to do?

  Thank you allionii123

  Now solved and pc with Windows XP home.

  Discovered a trick online, who said that at the beginning of XP installation, press F5, and this leads to a screen option - select 'standard pc' and continue with the installation of XP.

  (Again), formatted hard drive ran XP installation and followed above point.

  Worked the first time.

  Thank you very much for your advice.

  I think you can pressing F5 or F7...

  How to impose a layer of HAL during an upgrade or an installation of Windows XP

  Impose a HAL

  To prevent Windows XP to automatically determine the system HAL during the upgrade or installation of Windows XP, you can manually force in a system HAL. To impose an Abstraction Layer HAL during a upgrade or installation of Windows XP, follow these steps:

  1. During the phase in text mode of Setup, when you receive the message at the bottom of the screen, press F5:
     Press F6 if you need to install a third-party RAID or SCSI driver.

     Note If you press F7, the Standard PC HAL loads and the ACPI enforcement is bypassed.

  I would not need this except in the systems of many older and low end... :-(  After all, in the same article, for Standard PC they say: "the CPU can be a 386, 486, Pentium, Pentium II, or Pentium III '...

  Thanks for letting us know what you were doing.  Do you have all the necessary drivers after loading Windows XP?  I would not recommend using the default drivers for any hardware - always see what the manufacturer offers on their web page for each component of your system - card motherboard chipset, audio, video, network devices, etc.

• during the installation of windows 8, which upgraded the wizard asks to install now or install by creating media what the difference

  during the installation of windows 8, which upgraded the wizard asks to install now or install by creating media what the difference

  When you install by creating media, allows to create a backup of a Virgin DVD USB or USB key installation files. (I recommend you do this in case you need to reinstall Windows 8 in the future).

  If you choose to not, Windows 8 will be a non-media from your hard drive installation automatically.

  Windows 8 simplifies the procurement process with an installer called Windows 8 Upgrade Assistant Web that makes it easy to download and create a local backup for future use. Digital distribution works this way, you download the installer, launch that and he will download Windows 8, the time it takes depends on the speed of your Internet connection ultimately. Microsoft noted that the Web Installer includes a sophisticated compression technology that downloads pieces in sections of 10 MB to ensure that its safe delivery. When you download the installer, the installer creates a folder called "WindowsESD" in the root of your drive C:\ (if you have multiple partitions that this case may be on another). From there, you will find a complete Windows disk image, you can burn it to a blank DVD and make your own physics, copy, or store it on a USB key.

• What to do if cmd.exe will appear during the installation of windows 7?

  What to do if cmd.exe will appear during the installation of windows 7?

  I have my original installation disk to windows.
  After "Press any key", cmd.exe will appear and I don't know what to do.
  What should I type here?
  I tried also to advanced recovery method, but it can not read my drive...
  He said: "no installation disc valid." I tried to put it back, but it just doesn't work.
  What should I do?
  Thanks for your help :)
  
  Original title: Reinstalling windows 7

  At the Cmd box type: exit

  then press the enter"" key.

  J W Stuart: http://www.pagestart.com

• During the installation of Windows 7 or 8.1 using a USB stick - get the message "cannot be installed, it is a GPT.

  Hello

  During the installation of Windows 7 or 8.1 using a USB stick - get the message "cannot be installed, it is a GPT partition.

  I have 64 bit install discs for Win 7 and Win 8.1. These two install on my desktop in duel boot. I made a Flash DRIVE of each disk so I can install it more quickly.

  Problem: I get the cannot install because it is a GPT partition.

  Y at - there no way to make these 2 USB sticks work?

  Thank you, Brad

  Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.

  Your computer does not have Microsoft's Downgrade rights and you must buy a copy of Windows 7 with a valid Microsoft COA and product key.

  The screenshots below is from a laptop HP 15 t-j100... options and the configuration on your computer screens may differ.

  You will need to DISABLE "Secure Boot" and ENABLE "Legacy Support" in the "Configuration of the BIOS start-up secure" on the settings page similar to what is shown below, until you try to install Windows 7.

  

  After you save the changes, the computer will ask you to confirm the changes... Accept the changes by typing the four digit code and press the ENTER"" key.

  

  If you install Windows 7 from a USB and see a message of "load a driver - a required CD/DVD drive device is missing", it's because as 'System Configuration' > 'Config USB3.0 in pre-start' is set to 'Enabled '. This should be set to 'Auto '.

  

  In addition, as the factory hard drive is partitioned as TPG, you must start using the internal CD/DVD UEFI or UEFI-Key/key USB to install Windows on a GPT-partitioned disk. Turn on or restart the computer and press "F9" or "ESC", then "F9" when prompted. Select the source of boot UEFI you use and you press "ENTER".

  

  I suggest using Windows 7 SP1 for the best installation experience. If the DVD does not start as UEFI, you may need to use a USB Flash drive (can ask "Quick start" DISABLING in BIOS) as the installation media. Please note that some computers may not recognize a valid active UEFI USB Flash drive if it is formatted in NTFS and may require only a FAT32 formatted USB Flash drive. You should be able to make a FAT32 formatted Windows 7 installation USB Flash drive using Rufus, UNetbootin, Universal USB Installeror WiNToBootic. I like Rufus, because it contains options for 'Plan of GPT partition for UEFI computer' and 'FAT32'.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• T420: H310 PERC Setup driver during the installation of Windows 2008 R2 SP1

  Hello

  I try to install the SP1 of Windows 2008 R1 on T420. However, it does not detect the disk and asks me to load the Setup disk.

  Now, I downloaded the driver from: http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=1HHG8&fileId=3389750350&osCode=WS8R2&productCode=poweredge-t420&languageCode=EN&categoryId=SF

  Put it on a key USB and then the wizard to detect the USB but then he said: 'no signed device drivers were found.

  Reading carefully above the driver download page, they mentioned the installation instructions, it is shown how to load the driver during installation.

  HOWEVER, the real problem lies here. These instructions are for a '. '. ZIP format"driver. Considering that, they provide only ".". EXE format"from the driver to download.

  So, regardless of teaching the highest page download driver to load the driver during the installation does not work.

  And I could not find where to download the '. '. ZIP format' driver.

  Could you help me please. What I'm missing here?

  Thank you.

  You must use this driver:
  http://ftp.Dell.com/FOLDER01460337M/9/SAS-RAID_Driver_R2_4R5XT_A03_6.801.5.0_ZPE.exe

  Run it to extract the content, then put the content on a USB flash drive to use during the installation.

• error 0 x 80040705 occurred during the installation of windows essentials.what to do?

  error 0 x 80040705 is produced during the installation of windows essentials.what do? Help me please.

  Hello

  Thank you for contacting Microsoft Answers.

  This error is caused by a lack of installation of DirectX. Usually some DX files are already installed, but Setup cannot overwrite them. In my case, some of the files in \windows\SystemWOW64 have been accidentally encrypted, and the Setup program does not overwrite them. I had to manually delete these files for the Setup program to succeed. The cause may be different for you, but following these steps should help to understand which files DX are the cause of the problem.
  1. Install DirectX User Runtimes (refreshed June 2010) of http://www.microsoft.com/download/en...ang=en&id=8109
  You will be asked to choose the directory to put the files extracted from the cabin.

  2. run dxsetup.exe from the directory in step 1.

  3. installation failure will probably happen. Look at \Windows\Logs\DXError.log and find the report. INF in the error log file.
  For example:
  [13/07/11 20:36:35] module: dxupdate (Mar 30 2011), file: dxupdate.cpp, line: 2056, function: ExecuteInf
  Has no API: SetupInstallFromInfSection()
  Error: (5) - access is denied.
  Cannot install C:\Users\Foo\AppData\Local\Temp\DXA1BC.tmp\d3dx9_31_x86.inf: [x64_install]. The file is possibly corrupted.
  4. the INF files are files of configuration information, which are used to install the files listed in these. In this example, d3dx9_31_x86.inf is the. INF file. First, try to determine the. DLL file installed with this INF using the name of the INF file and look for a DLL with a name similar to \windows\systemwow64, if you are using 64-bit Windows, in \windows\system32, if you are using 32-bit Windows. In many cases, the name of the INF should tell you what DLL it installs, as shown in the examples below:
  
  xinput1_3_x86.inf install xinput1_3.dll
  d3dx9_33_x86.inf installs d3dx9_33.dll
  d3dx9_31_x86.inf install d3dx9_31.dllif you can't say the name that installs DLL has failed, you will need to watch the CAB file. See \Windows\Logs\DirectX.log to determine what CAB file has been processed before the error. Go to the directory you have chosen in step 1, and then open this CAB file in Explorer file by double clicking it. That will open a window of the Explorer showing the files in the cabin, including a file INF open the INF file, by right-clicking on the file and choosing extractin the menu contextual. The INF file has entries indicating that it installs the DLL as follows:

  [DirectX_System]
  D3dx9_38.dll [DirectX_SysWOW64]
  D3dx9_38.dll
  5. the likely installation failed because this DLL could not be replaced by the installation program. Find out why it could not be crushed and delete it manually from \windows\systemwow64 or \windows\system32.

  6. go to step 2 and repeat until the installation is successful.

  See you soon.

• Are windows puts an administrator account during the installation?

  Are windows puts an administrator account during the installation?  I'm the only admin user on windows, but I can't do much like I said I need admin which remove, access or open the files.

  I use windows 7

  Original title: Admin account

  You must be an administrator, because the first account you create during Setup must be an administrator-level account.  There is also a built-in account (with a current name 'administrator'), but it is disabled, unless you are in Safe Mode (restart hold F8 for safe mode).  As soon as the integrated, you can sign in and upgrade your real account on a daily basis at the level of administrator control panel.

  Note: even if you are an administrator, some processes will ask confirmation continue.  This is recommended because it prevents the virus of piracy of your profile and using your account.