Windows XL do not recognise my Hitachi camcorder

Similar Questions

• Brother printer driver hl-1230 parallel not recognised in Windows 7 Professional 32 bit.

  Brother printer driver hl-1230 parallel not recognised in Windows 7 Professional 32 bit. It is supported by MS and brother informed me to contact MS support, but of course MS wants MORE money for support.

  How can I get this printer working?

  * I have updated the list of printers supported in adding/Printing Assistant
  * printers only like mine is HL-1240 and HL-1250. I installed them, but it did not work. Only the white pages are out.
  * I went to Windows Update, and was the only one available update for Windows Defender
  * I have not tried all of the Vista drivers for this printer, because I don't think I would have, if MS wrote W7 is pressed it.

  [http://www.microsoft.com/windows/compatibility/windows-7/en-us/Details.aspx?type=Hardware&p=Brother%20HL-1230%20Laser%20Printer&v=Brother&uid=HL-1230ZU1&pf=0&pi=0&s=brother%20hl-1230&os=32-bit]

  Brother written all Brother print drivers included in the operating system as well as those on Windows Update.

  Have you already installed the drivers from Vista 5/2007 for this device since the Brother's Web site?

  http://welcome.solutions.brother.com/BSC/public/us/us/en/DLF/DLF/000000/003300/dlf003321.html?reg=us&c=us&lang=en&prod=hl1230_all&type2=1&OS=74&flang=4&dlid=dlf003321

  I'll send the mail for the Brother printer driver testers who are in Redmond and confirm which driver what they recommend for the device.  I do expect a response until after Jan. 4.

  Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• My Book Essential is not recognised by Windows 7

  Windows 7 does not recognize My book essential (green belt) * Please HELP

  I couple my book essential (green belt) 250 and 500 G connected to my PC. Couple of months that I install windows 7 on my pc. my book essential (500 G) that a lot of data not recognised by windows 7 the other is working wonderfully.

  I'm trying to update my computer management and analysis of the material changes, and it keep telling me that the software device driver was not properly installed not identified device, no driver not found.

  I connect it to my laptop running windows xp and surprise it works fine.

  Any help, I appreciate it.

  Hello

  If it helps, try the steps and check them off below.

  Method 1: Steps to change the drive letter:

  1 connect the player.
  2. click on the Start button and right-click on "computer".
  3. click on "manage the.
  4. click on "disk management".
  (5 locate 'My Book' ((deuxieme column) assigned to a disc number.
  6. right click on 'My Book'
  7. click on "letter of change of road and railways.
  8. click on change.
  9 choose a new drive letter and click OK

  Method 2: If you are still having the same problem then, I recommend you contact its manufacturer for the latest firmware of the drive.

  http://support.wdc.com/
  http://www.wdc.com/en/company/contact.asp
  http://www.wdc.com/en/products/products.asp?driveid=726

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• IPod Shuffle 2nd Gen not recognised in Win 7 64 bit

  My iPod Shuffle 2nd generation is not recognised in Win 7 64 bit.
  It does not appear in iTunes or my computer.
  It does not work in my other PC Win XP 32 bit, I even restored it on my other computer, but when I connect it to my PC Win 7 is not.
  I also have the latest version of iTunes for 64-bit installed
  Error #43 appears also in devices when I connect it.

  Hi Antonio,.

  1 is. the computer able to recognize any other USB device?

  2 is the issue limited to Ipod Shuffle 2nd Gen?

  3. don't you make changes to the computer before this problem?

  Follow these methods.

  Method 1.

  Connect the device, run the hardware and devices Troubleshooter and check if that helps.

  Follow the link given to open the Hardware Troubleshooter: http://windows.microsoft.com/en-us/windows7/Open-the-Hardware-and-Devices-troubleshooter

  Method 2.

  You can disconnect all USB devices and then perform the following steps:
  1. click on start and then click Control Panel.
  2. click on system and Maintenance, click System, and then click Device Manager.
  Note that if control panel is in Classic view, double-click System and then click on Device Manager.
  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  3. in Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".
  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.
  4. Repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and Windows 7 will automatically reinstall all USB controllers.

  Method 3.

  If the question is limited to iPod, you can view this issue in Apple Support communities: https://discussions.apple.com/index.jspa

  Let us know if you need assistance with any Windows problem. We will be happy to help you.

• After recent, iPhone, 6, update, Windows, Explorer, does not work, see, iPhone

  I installed the latest update required for my iphone ios 6 a few days ago, and now when I try to download pictures from my iphone to my PC (via USB connection), the PC does not see the iphone.   iTunes sees it yet, but windows Explorer does not work.  It seems that some setting has been broken through the update of ios.  A way to solve this problem?

  Restart the computer and the iPhone. Unlock the iPhone before connecting it to the computer. Any change?

  TT2

• My itunes on windows 10 does not refresh to allow me to use my new iphone 7

  My iTunes on windows 10 does not refresh to allow me to use my new iPhone 7, I have loaded down the update several times but he gets halfway through the installation of the update then say there is a problem and UN-installs

  Follow the instructions by If you can't install or update iTunes for Windows - Apple Support

• attempt to copy to the windows drive is not an unknown error occurred (-54)

  When syncing my iPhone, I get the following error message near the end of the processs of 6s + 128 GB

  attempt to copy to the windows drive is not an unknown error occurred (-54)

  
  

  Someone has an idea what is the cause to happen and what I can do about it?

  Thank you

  Hello

  Here is a solution for your problem

  http://www.IMore.com/having-trouble-syncing-iTunes-after-updating-Windows-10-her're-your-fix

• There is a section of 3 inches from the window which will not recognize the mouse. It will not let you click on the icons or the screen somehow in this section under the address bar. It is only in firefox when it comes to a problem

  There is a section of 3-inch window that do not respond or recognize the mouse. It not let you click on the icons or the screen somehow. It is the only program that we are facing this problem with.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode
  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

• New number of window: URL ddoes not show and no toolbar boomarks

  Firefox works fine except when I open a new Firefox window. In the new window, the URL is not refreshed, and bookmarks that I have below the URL do not present.

  Note: Everything works perfectly when I have just the one FireFox window. The problem occurs only when I open a new FireFox window!

  Note: in the second window:
  If I type the URL, it shows OK. But if I do a Google search and then choose a page of the search results, the URL refreshes not - instead, it remains on the original URL, even though it shows the new news page.

  These problems occur only when I start a new window in FireFox. When there is just a window, everything works perfectly.

  Any ideas?

  Try:

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode
  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

• Windows 8 does not see the hard drive on the Satellite A200

  Windows 8 does not see the hard drive on the A200.
  How to install it?

  S strange Windows 8 should already contain the HARD drive controller driver to recognize the HARD drive during installation.
  The HARD drive is visible in the BIOS?

  Do you use the original disc from Microsoft of Windows 8?

• HP envy 17-j017cl touchsmart: when recovery is complete. My 64 bit of windows 8 is not active.

  HP TouchSmart PC ENVY 17-j017cl laptop

  I bought 4 recovery for HP DVD media.

  When duly get filled. My 64 bit of windows 8 is not active.

  A helpe me?

  Thank you microsoft is helpe me and my problem is solved.

  Spoiler (Highlight to read)

  

• New tabs open in a new window or in a pre-existing window that is not currently used.

  What happened is that I was running two windows of Firefox at the same time and trying to open a new tab, the new tab opens in the window I was not currently using. Later, I closed a window and trying to open links in a new tab, instead it will open a new window.

  I checked the settings of the options that would be opening a new window opens a new tab instead turned on, which is.

  My hunch is that one of your extensions is cause that to happen.

  http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+themes

• Windows Vista does not start - only Safe Mode

  Hello

  Windows Vista does not start. Starts only in Mode safe. Same system of recovery is not backward by date

  Press F8 all turn the laptop.
  Choose the first option: by computer repair and try to repair the operating system automatically.

• In the Menu background, recently closed recently closed tabs and Windows Options are not enabled

  Recently closed recently closed tabs and Windows Options are not enabled.
  I tried to reinstall and upgrade to firefox v4 and nothing has changed.

  • Make sure that you do not run Firefox in private - browsing using Firefox without saving the story mode (permanent).
  • You enter private browsing mode, if you select: Tools > Options > privacy > History: Firefox will be: "don't forget the story ever.
  • To view the history settings and cookies, choose: Tools > Options > privacy, choose the setting Firefox will: use the custom settings for the story of
  • Uncheck the box: [] "automatically start Firefox in a private browsing session.
  • Press F10 or press and hold the Alt key to bring up the 'Menu Bar' temporarily.

• my hp laptop has started to show a message that says that my copy of windows 7 is not genuine

  My computer is showing a code build 7601 and said my copy of windows 7 is not genuine, the lap top is 3 years old and this message appears earlier.

  OMG how stupid, lol, has always believed that I was smart, I thank you for your help, the love of this resource. Thank you once again.

  Is putting the mas,

  Derek