Brother printer driver hl-1230 parallel not recognised in Windows 7 Professional 32 bit.

Similar Questions

• printer hp photosmart 7345 has not run with Windows 7 Professional 64 bit

  Our range of printers hp photosmart 7345 has work perfectly with Windows XP Professional 32-bit, but he has not run with Windows 7 Professional 64 bit. Please could you tell us who should be used?

  Hello

  HP Photosmart 7345 is compatible with Windows 7.

  Download the drivers for your printer from the below mentioned link and check if it helps.

  http://bizsupport1.Austin.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=213999&lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=213997

  
  Contact HP support for further assistance.
  http://h10025.www1.HP.com/ewfrf/wc/siteHome?cc=us&LC=en

• Kodak esp3250 drivers do not install on Windows XP Professional 64-bit

  Hello

  I just want to ask if it is possible to download drivers for my Kodak ESP 3250 printer. I heard that it is not compatible with Windows XP Professional 64-bit machines, but I think that it is not true.
  Thank you
  Zuga01

  If you really have XP Pro x 64 (which is rare), you're right that current software/driver Kodak for its all-in-one printers (including the ESP 3250) will not work for your operating system.  See http://support.en.kodak.com/app/answers/detail/a_id/32108/selected/true

  It is possible that Kodak may have an older version of its software that works.  See http://support.en.kodak.com/app/answers/detail/a_id/23858/related/1/selected/true

• Printer HP Phtosmart D7560 h: HP Photosmart D7560 h Driver Install CD is not Compatible with Windows 7 Professional?

  I put the installation CD into my disc drive of re - install my printer D7560 h and received an error message that says that the h D7560 is only compaible with Vista 64-bit, Vista and XP, as my OS was 601.64.  I then noticed that it also says on the CD.  How can I work around this problem of re - install my D7560 h?

  OS - Windows 7 Professional 64-bit, SP1

  Browser - ie 11

  PC - workstation HP Z220 CMT

  12 GB of RAM

  Intel i3 3220

  OK, so I turn on the printer power.  Thank you for that.  Reinstalled the printer, but I still cannot print.  I get so many error messages I can't keep track of them all.

  The error I got the best on the printhead wasn't working - 0xc19a0013 error.  Sought the french Center of HP solutions and has been made to clean the print head.  Did.  Still no print capability.  Then, search with Bing for this error and was directed to this Forum HP article on soak the print head in warm water.  Try this next because my printer sit without power for nearly a year (probably shouldn't have it, but oh, well done) and very probably the ink clotted and the print head must be blocked.

  If it works, I'll go back and mark this issue resolved...

  However, if I need help I'll be back.  Thanks, Shlomil, for asll you did to help me on this point and I hope not to hear you again! .......%:~}.......

• Brother printer and the scanner does not work after Windows Update.

  Separated from this thread.

  I have the same problem with my Brother ADS2000 scanner and my multi MFCJ4710.  I can print with the MFC, but the Control Center detects or scanners.  They worked and suddenly stopped.  I wonder if Windows update changed something?  Scanners both work with Windows Fax and Scan, but not Brother Control Center 4.  I called support of brother and again, they have said something about TWAIN and I have to do some registry clean.  I tried their manual steps, they sent with the registry fixes and which totally screwed up on my computer.  I had to do a restore and now back to square one.

  Any solution out there?

  It was my dose,

  (1) start search box type menu "user accounts".

  (2) open and select "user account control settings."

  (3) to change the cursor to "never notify".

  (4) 'ok' to save

  (5) fact! You may need to restart you machine.

  PS: this was my fix, it was caused by software AVG anti-virus, AVG has replaced this setting and would fail to wireless for my scanner. It will be useful.

  Rob

• 5.1 surround Sound speaker system does not work in Windows 7 Professional 64-bit edition

  My problem is about the same as other users who cannot get their surround sound speaker system to work properly in Windows 7.

  I have a subwoofer and 5 speakers (2 front, 2 rear, 1 for the centre).  Connection to the RealTek HD Audio embedded is simple, orange for the subwoofer, green for the front and black for the rear.

  Test the sound in Control Panel-> windows sound produces a sound on all channels and RealTek HD Audio Manager at the same time, which is the desired configuration.

  However, different applications use different channels.  IE and Firefox use the front channels, VLC/MediaPlayer uses the back.  3D games (that is to say WoW) through all channels.  In each case the subwoofer does not work.

  I tried to download the latest drivers on the motherboard (Gigabyte) manufacturers site.  I even tried the supplied RealTek drivers (even if on the Web from RealTek site which is NOT recommended).  I tried to connect the connectors of the subwoofer to the different takes (reversed black and green).

  I have experimented with the settings in RealTek HD Audio Manager and control panel-> windows Sound.  Nothing works.

  These exact same subwoofer and speakers worked perfectly well on Windows XP.

  I have 2 questions:

  one) has anyone resolved their 5.1 & Windows 7 problem something that I have not yet tried?

  (b) when will Microsoft take this issue seriously?  All Microsoft provided answers just repeat what everyone

  has already tried.

  First disconnect the cable 3 (orange, green and black) then click on Control Panel configuration-hardware and sound - Real tek HD audio manager - central tick, subwoofer and rear pair, front left and right and filling of speaker

  Then click on advance device settings.

  Select "perform front and reading of output devices back two different audio streams simultaneously" and give ok

  Plug all three pins one by one and select the appropriate option in the popup windows.

  That's all.

  You give enough information for me to get this working.   My system runs Win 7 X 64 Home Premium.   When I select 5.1 sound capacity side my 550 x Logitech speakers are not recognized.  If I select 7.1, which is the capacity of my chip Realtek chipset, I can get the two outside are activated as a "rear" speakers and can push the test tones to each of the four surrounding speakers and the combination of Center/bass via the Realtek driver.

  Regarding the "front and reading of output devices back two different audio streams at the same time" worries... I can't find this option.  There are at least two suppliers of 'control of the interfaces' assets on my system.  One is provided by RealTek, the other by Microsoft.  The access roads to these interfaces is roundabout and confusing, to say the least.

  Some compromises are in order in my humble OPINION.  I have my Pandora one stream play in an acceptable way in my small study.  Many of the source of sounds streamed to me are recorded in stereo or mono, I find myself hitting the 'matrix' on my Logitech X 550 button quite frequently.  Sometimes a more recent piece is delivered which actually looks Ok without the decoder "matrix".

  What I would really like to be able to do is to "reconfigure on the fly" between the built in speakers on my Acer Z3731 system USB bar ' All in One ' and my external Logitech X 550 popular with the ability for the presentation of "5.1 surround sound" through three sons.  When I try your procedure, I don't get separate recognition of each thread, as it is trendy and often end up with its 2.1 being eliminated in my 5.1 speakers, because somehow Microsoft has re-recognized the built-in USB port based his bar instead of the three rear wires plugged into the outlets provided by the manufacturer of the system.

  If there was ever separate 'Speakers' and 'Realtek' icons in the UI on my system, speakers are long gone and I can't get back them.  All I see is the Realtek driver.  I would like to see the two icons 'Speakers' different, I could mark "integrated 2.1" and "5.1 external '", in addition to the driver Realtek.»  How can I get these to reappear?

  Can anyone suggest a way to have two different sets of "speakers" recognized and identified in the Microsoft UI in addition to the Realtek driver?  If I could get because of this, I think that the driver would let me 'set as default' one or the other speaker set, and I 'software switching' capable of letting me choose the external speakers or integrated sound bar offers the sound.

• HP Photosmart 2710: Need a printer driver for a HP Photosmart 2710 on Windows 8.1 RT 32 bit.

  Need a printer driver for a HP Photosmart 2710 on Windows 8.1 RT 32 bit.

  Hi lt12345,

  I understand that you are looking to use the Photosmart 2710 with Windows 8.1 RT, but are unable to find a driver. In my attempt to find a driver, I've come empty-handed. It seems that this printer is not supported for printing from Windows RT.

  Sorry to be the bearer of the bad news. Kind regards

• My Book Essential is not recognised by Windows 7

  Windows 7 does not recognize My book essential (green belt) * Please HELP

  I couple my book essential (green belt) 250 and 500 G connected to my PC. Couple of months that I install windows 7 on my pc. my book essential (500 G) that a lot of data not recognised by windows 7 the other is working wonderfully.

  I'm trying to update my computer management and analysis of the material changes, and it keep telling me that the software device driver was not properly installed not identified device, no driver not found.

  I connect it to my laptop running windows xp and surprise it works fine.

  Any help, I appreciate it.

  Hello

  If it helps, try the steps and check them off below.

  Method 1: Steps to change the drive letter:

  1 connect the player.
  2. click on the Start button and right-click on "computer".
  3. click on "manage the.
  4. click on "disk management".
  (5 locate 'My Book' ((deuxieme column) assigned to a disc number.
  6. right click on 'My Book'
  7. click on "letter of change of road and railways.
  8. click on change.
  9 choose a new drive letter and click OK

  Method 2: If you are still having the same problem then, I recommend you contact its manufacturer for the latest firmware of the drive.

  http://support.wdc.com/
  http://www.wdc.com/en/company/contact.asp
  http://www.wdc.com/en/products/products.asp?driveid=726

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I recently installed a DVD from ASUS drive, my DVD will not play on Windows media player plug-in but I bought the Corel DVD freeze and will not play.

  Windows XP DVD with Windows Media Player problem

  I have a Dell dimension3000 running Windows XP. I have an upgrade video card NVIDIA 8400 GS with memorey upgrade 2 g. I recently installed a DVD from ASUS drive, my DVD will not play on Windows media player plug-in but I bought the Corel DVD freeze and will not play. Is there a better plug-in or a solution to this problem?

  Try to download the utility "Windows XP video decoder check utility.

  It checks the ability of DVD to WMP encoder

• computer laptop Sony vaio S - series VPCS133GN, operating system windows 7 Professional (64 bit) genune, these days, my pen drives are not installation and opening

  I use a computer laptop sony vaio S - series VPCS133GN operating system windows 7 Professional (64 bit) genune, last few days my pen drives are not installation and opening. Kindly help me.

  Best regards

  A.C. Dutta

  Hi Johanna,.

  Thanks for posting your query in Microsoft Community.

  I understand that you can not use the USB in Windows 7.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this

  1. you get any error message?

  2 have you tried using different USB ports?

  3. any other USB key works on the computer in question?

  4. do the USB works on any other computer?

  5 have had any changes made to the computer before the show?

  Please follow the methods.

  Method 1:

  Run the Microsoft fixit for the link.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  As all devices have same also have USB device associated drivers. Appropriate sometimes drivers not detected after initial installation so reinstalling the drivers can fix the problems.

  You can check after uninstalling and reinstalling USB drivers if you are able to connect. You can disconnect all USB devices and then perform the following steps:

  (a) click Startand then click Control Panel.

  (b) click system and Maintenance, click System, and then click Device Manager.

  (c) Note if the control panel is in Classic view, double-click Systemand then click on Device Manager.

  (d) If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  (e) in Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".
  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

  (f) repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and Windows 7 will automatically reinstall all USB controllers.

  We would be more than happy to help you if the steps above did not solve the problem.

• Network Drive will not refresh, I use 2 machines to Windows 7 Professional 64 bit and 1 Windows 7 Professional 32-bit machine on a wired Ethernet network.

  I use 2 machines to Windows 7 Professional 64 bit and 1 Windows 7 Professional 32-bit machine on a wired Ethernet network.

  The network works fine with one question. When I add a new file on the same machine and try to access this new folder from another machine the new folder does not appear. I have to disconnect the network drive of the machine with the new folder, and then map a new drive. When I map the new drive the new folder appears in Windows Explorer on the second machine.

  It's very frustrating when I want to add a file attachment to e-mail from another machine and it does not appear until I disconnect and re - map the drive.

  I hope this all make sense. Does anyone have an idea how to solve this problem? I don't remember this problem when my network was XP Pro machines.

  Thanks for your help.

  Thank you for your help.

  The I work around this problem is to do step 1 and step two, as you suggest.  I haven't restarted the computer though - I will also try it.  I have also not tell abled my ESET NOD32 Antivirus software either - I'll try that too.
  The network drive I'm seeing 'change' on does not refresh by itself, when I press F5 or go to view/update.
  Search Google indicates that this refreshing a network drive issue to show a newly created folder, etc. is a long time, Windows 7 problem.
  I would like your ideas on the potential problem of Windows 7 found on Google.
  Thanks again for your help.
  Bill

• need printer driver for HP Color LaserJet 3600n running Windows 8

  Need printer driver for HP Color LaserJet 3600n running Windows 8

  Click Next if you Win 8 pro 64-bit

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=501046&prodTypeId=18972&prodSeriesId=501044&swLang=8&TaskID=135&swEnvOID=4132

• My DVD/CD drive does not work in Windows 8 Professional, and it ISN'T a hardware problem.

  My DVD/CD drive does not work in Windows 8 Professional with or without data or audio in it. However, if I turn off the PC with a bootable CD/DVD in there, the PC recognize the media and initiate the CD when turned on. This confirms that the DVD/CD drive actually works, but for some stupid reason, Microsoft Windows 8 Professional will not recognize the same DVD/CD player it loaded since! Thanks again Microsoft for another product of shit. Now, how are you going to fix this? And how are we supposed to run things such as WordPad or paint, etc. I predict that Windows 8 will fall faster than Windows Me!

  Hello

  To access all applications - just right-click anywhere on the splash screen - the lower right corner
  -All Apps - scroll to the left to learn more. You can pin any application to the start screen - right
  Click on - to start pine.

  It is a real help:

  Windows Store - Top free - Windows 8 Cheat Keys

  While on the screen type start - Help

  Or Win Key Q plus Apps search - help

  Or charms - Search - Apps - Help Menu

  After that the foregoing-> on left click-> Help and Support.

  ==================================

  Solution Windows 8 - left Center - learn more
  http://support.Microsoft.com/GP/Windows-8

  Meet Windows - a good start
  http://Windows.Microsoft.com/en-us/Windows-8/meet

  ====================================================
  ====================================================

  It was an upgrade of Windows 8 or you you destroy the old operating system and
  do a full install? Are there any error messages?
  
  Check the Compatibility Center to see if the drive is compatible:

  Windows Compatibility Center
  http://www.Microsoft.com/en-us/Windows/compatibility/WIN8/CompatCenter/home?language=en-us

  Check with the manufacturer of the system support, their documentation online and pilot/firmaware,
  and ask questions in the forums (if any) on known problems. Some CD/DVD players are not
  Windows compatible 8.

  ---------------

  From the desktop - WINDOWS key + D while on the screen start to access the desktop:

  WINDOWS key + X or build the mouse in the lower left corner right click and corner - command prompt (ADMIN)

  Enter it below (or COPY and PASTE):

  Reg.exe add "HKLM\System\CurrentControlSet\Services\atapi\Controller0" / f/v EnumDevice1 /t REG_DWORD /d 0x00000001

  RESET
  (from AtishayMSFT)

  -------------------------------------------------------------------------------------

  -Use and you need to use it again after trying the methods below.

  What happens if a device is not installed correctly? (Run the hardware and devices Troubleshooter)
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  ================================================

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Starting from the command prompt from the desktop - Windows key + X - (Admin)

  SFC/scannow
  (space between C and /)

  Then run CheckDisk execution - chkdsk /r (the / r includes the parameter f controls)

  Windows key + X - command prompt (Admin)

  Chkdsk /r
  (space between the k and /)

  Or run CheckDisk in Windows 8:

  Improve performance by optimizing your hard drive - see "to repair a drive.
  http://Windows.Microsoft.com/en-us/Windows-8/improve-performance-optimizing-hard-drive

  --------------------------------

  Windows key + X - Control Panel

  Try this - Panel - Device Manager - CD/DVD - double-click the device - driver
  Tab: click on update drivers (this will probably do nothing) - then do a CLICK RIGHT to the road.
  UNINSTALL - REBOOT this will refresh the default driver stack

  ====================================================

  If necessary:

  Try to do a "Refresh your PC without affecting your files" (or modification of your personal data
  settings) or even a restore.

  Windows 8 includes special discount methods (keep files and settings) or a reset
  (new installation remove all).

  How to restore, refresh or reset your PC
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  How to create a system image to refresh your PC in Windows 8
  http://support.Microsoft.com/kb/2748351

  How to update Windows 8
  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  How to reset Windows 8
  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  =====================================

  Expert help with CD/DVD drive issues available here:

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://Club.myce.com/F61/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• CE712A: Driver for HP Color Laserjet CP5225 for Windows XP Professional

  I can't find a driver for my OP de Windows XP Professional 64-bit for my CP5225 printer. Can anyone help?

  In other words, the printer is connected to your network with a rj45 cable I guess.  If yes you must go to the information on the printer menu and print a Setup page that will give you the address ipv4 of the printer.  It should be something like 192.168.1.12 now on you computer xp go to printers and faxes and add printer.  Local printer and do not check autodetect, then and on this screen, click on create a new port and the menu drop-down select standard tcp/ip, and then click Next. Type the address of the address of the printer (ipv4) that was on the configuration page and just keep on going until you get to the page of decision-makers.  On the left choose HP and will work on the Strip right down to Color Laserjet 8550 PCL or PS as long as one or the other, and then click Next and change the name to HP CP5225 or whatever you want to call the printer and you can check on this page to make it your default printer.  Complete and you should now be able to print to the printer.

• Windows 7 Professional 32 bit. Printer Spooler problem. Cannot print.

  I have Windows 7 Professional 32 bit. I did a clean install of Vista.

  Basically I'm not able to add a printer, because of the many errors I get.
  

  If I go to the printers-> add printer. I got the error: "Windows can't open add printer." The local print spooler service
  does not work. Please restart the spooler or restart the machine.
  Then I go to Run-> Services.msc and manually restart and 'Start' the printer spooler.

  So now the Add Printer dialog box and choose to add a local printer... There is no existing port to choose
  go and it does not create a new port. (I have to reboot and start the spooler each time before you can
  to successfully open the Add Printer dialog box). (The Printer Spooler as somehow 'stop' shortly after I 'start'.

  Go back and I try to add a network printer. I see my printer network hosted on the network drive, click on the
  printer and I select the printer begins to try to install it, but it quickly produces the error message:
  "Windows cannot connect to the printer. The local print spooler service is not running. Please restart the spooler or
  restart the machine.

  I have absolutely no idea what could cause this problem. And Yes, I tried the Support to call Microsoft, the rep had no idea what was causing it.
  

  And the print spooler dependencies are listed below:
  This service depends on the following system components:
  Remote procedure call

  The following system components depend on this service:
  Fax

  
  

  If any ideas why I can't print?

  Hi j8636,

  As the print spooler service stops automatically, I suggest that run you a scan for viruses/malware.
  Run a virus/malware scan and get back to us.

  Microsoft Security Essentials
  http://www.Microsoft.com/Security_Essentials/

  How to get rid of malware by Vincenzo MVP
  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  Kind regards
  Abdelouahab

  Microsoft Answers Support Engineer