Windows XP blue screens or freezes during playback of music through speakers

Similar Questions

• During playback the music through Windows its multimedia player breaks and slows down in XP. How can I fix it?

  During playback the music through Windows its multimedia player breaks and slows down in XP. How can I fix it? All the drivers are up to date.

  Hi EBmusic,

  I see that you have a published similar thread .

  ·         Have you tried suggested the same steps?

  Try the suggestions and see if it helps.

• Blue screen of death during recovery

  Apparently, the latest updates from MS caused problems and I had the blue screen of death during the start several times on my Pavilion p6610f desktop computer. I try a system recovery and got the screen died shortly after the recovery began. Now it does not start or even turn on a screen.  Any help would be appreciated.

  Well, this is my fourth attempt at this announcement, I hope it will work this time.  Below are my answers to your questions.

  Hello jp-3,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post about how you are not able to boot your Windows computer after attempting a recovery, and I'd be happy to help you! To start, I have to ask you a few questions:

  Mech Hi and thanks for your help.

  • What is product and model number from your desktop?

  It is a Pavilion p6610f desktop PC

  • What version of Windows you have installed on your computer?

  I was running 7 Home Pro

  • Has your computer finished all his important updates from Windows?

  The updates had been installed, which was when I started to have problems

  • Have you updated your drivers from HP the HP SupportWizard?

  I didn't have a chance to update anything after you restart MS. updates He immediately started crashing. I restarted three times and got a truncated blue screen every time, that's why I tried the recovery.

  • What is a current or recent problem?

  He started just after the latest version of Windows update.

  • You are able to get an image from another monitor?

  In general, I run two monitors (bothHP) via USB converter j5create JUA310, which I unplugged in case of conflict. It crashed with two configuration simple and double monitor. When I was running food, I had only the primary monitor upward.

  In the meantime, I recommend that you follow this document on screen is blank after you start the computer. This should help with the display on your screen when you start first to the top of your computer.

  I unplugged everything - HP Color laser printer duplicator Kensington USB port and USB mouse Logitech wireless (wired mice HATE!). Had previously removed just in case USB Sandisk flash drive. The computer started, monitor went up, and I received a message "windows recovered from an unexpected shutdown - check online solutions. Did respond to the message again. Did not try a BIOS update.

   

  Thanks for your help!

  Please re-post with the results of your troubleshooting, as well as the information requested above. I look forward to your reply!

  Concerning

  MechPilot
  I work on behalf of HP

• Movie Maker: saved big screen turns black during playback

  Movie Maker project works well but saved movie screen turns black during playback. The music plays but not all images. I saved the project as a movie 4 times and each file size is another. Makes me think that images are not saved to the film.

  Movie Maker project works well but saved movie screen turns black during playback. The music plays but not all images. I saved the project as a movie 4 times and each file size is another. Makes me think that images are not saved to the film.

  ====================================
  A few things that might help...

  There may be a compatibility issue with some of your
  source files. Convert your audio files to the. WMA
  format before you import into Movie Maker can be useful to
  a try.

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv
  Audio - wav, wma, wmv

  Also, before you save it... go to... Tools / Options / Compatibility
  tab and disable all filters / OK.

  It may be interesting to try to save the project in DV - AVI format...
  (the file size will be much larger, but the result may be better)

  XP Windows Movie Maker 2.1...
  To save a DV - AVI movie file...
  (and other options)
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  Show more choices.
  Other parameters.
  Open the window of the droplet and choose... DV - AVI.
  Next /.
  Wait while the movie is saved.
  Finishing...

  ===

  There may be a compatibility problem with music
  files. Convert to WMA format before importing
  worth try in Movie Maker.

  There are to many converters available on the net...
  Some are free - some details... the following freeware
  is but one example. :

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Freemake - Free Audio Converter
  http://www.Freemake.com/free_audio_converter/
  (Windows XP / Vista / 7)
  (* Read * all * the installation screens... it)
  may be a few items you want to unmark *)

  When you have installed Freemake... Open Freemake
  and drag and drop your files music on the main screen.

  Or... Click left on the Audio button, then navigate to the
  your audio files are saved in the folder.

  Select (highlight) the files you want to import into
  Freemake and left, click on the button 'open '.

  When your music files are imported into Freemake,
  On the left, click on the WMA icon at the bottom of the screen.

  The "Output settings" screen opens.  Choose
  ' Save in ' file so you can find the converted files.

  On the left, click the "Convert" button and the files must be
  converted very quickly.

  That should do it...

• Windows 7 blue screen problems

  Windows 7 blue screen problems is so frustrating. The blue screen of death or BSOD because it is often called. I need help...

  Hello

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  Check out these utilities to see if information may be collected:

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or
  so time of the BSOD for more information on the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 which shows the
  Details of all application crashes occurred in your system. The information of the plant are extracted
  the .wer files created by the Windows Error Reporting (WER) of exploitation component
  system each time that an accident has occurred. AppCrashView also allows you to easily record the
  list of accidents to the text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Windows 7 blue screen... BCCode: a

  I was recently watching a movie on my laptop when suddenly "blue-screen" appeared with error codes. My laptop then restarted and it happened again. I then waited so he can restart once again, however, I started windows in safe mode and then rebooted the system, and it came perfectly. After you find the error Although the center of the action, I found this information.

  Signature of the problem
  Problem event name: BlueScreen
  OS version: 6.1.7600.2.0.0.768.3
  Locale ID: 2057

  Additional information about the problem
  BCCode: a
  BCP1: FFFFFA8015CAF010
  BCP2: 0000000000000002
  BCP3: 0000000000000001
  BCP4: FFFFF80002B8BA57
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 768_1
  Bucket ID: X64_0xA_nt! MiReleaseConfirmedPageFileSpace + 87
  Information about the server: 1d3b1813-1d92-44ea-8f24-3e4ca7b3dac8

  I would really appreciate any information on this subject and how to work around this problem in the future. Thank you for any feedback.

  Hello

  References to Vista also apply to Windows 7.

  Added new hardware, updated drivers to date (don't forget to check in Control Panel - Windows Updates -
  updates to the pilot), or add key software lately? Drivers and antivirus/antispyware/security
  the products are also suspect likely. Next message is my generic driver updated methods to use when
  you get to this part of the resolution of the problems.

  BCCode: a 0x0000000A

  Cause

  This bug check is issued if the memory paged (or invalid) is accessible when the IRQL is too high.

  The error that usually generates this bug check occurs after installing a faulty device driver,
  BIOS or system service.

  If you encounter a bug 0xA control during the upgrade to a later version of Windows, this error can be
  caused by a device driver, system service, a virus scanner, or backup tool which is not compatible
  with the new version.

  Solve the problem

  If a kernel debugger is available, get a stack trace.

  To resolve an error caused by the faulty device driver or service system, BIOS

  1. Restart your computer.
  2. Press F8 to character-based menu that displays the choice of operating system.
  3. In the Windows Advanced Options menu, select last known good Configuration .
  4. This option is most effective when a pilot or a service is added at a time.

  To resolve an error caused by an incompatible device driver, system service, virus
  Scanner, or backup tool

  1. Check the system log in Event Viewer for error messages that may identify the device or
  2. the driver that caused the error.
  3. Try disabling the cache in memory of the BIOS.
  4. Run the diagnostics of material provided by the manufacturer of the system, in particular the memory
  5. scanner. For more information about these procedures, see the manual of your computer.
  6. Make sure that the latest Service Pack is installed.
  7. If your system has interface cards (SCSI) small computer system, contact the adapter
  8. manufacturer for updates of Windows drivers. Try to disable sync negotiation in the SCSI
  9. BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination.
  10. For devices (IDE) peripheral electronic integrated, set the built-in as only primary IDE port.
  11. Also, check each IDE device to the right setting master/slave/stand alone. Try
  12. remove all IDE devices except for the hard drives.

  If the message appears during installation of Windows, make sure that the computer and all the
  devices are listed in the list of the products tested Microsoft Windows market.

  BCCode: a 0x0000000A<-- read="">
  * 1025.html http://www.faultwire.com/solutions-fatal_error/IRQL-not-less-or-Equal-0x0000000A-

  =========================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that causes
  It crashing.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  This is my generic troubleshooting tool and can probably give a bit more specific when help
  you give the ICC codes.

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen
  of death "crashes and displays the information about all crashes in one
  Table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista (also Windows 7) Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Last night, my laptop that runs windows xp blue screened and says something about the queue

  original title: help solve a mistake, please on windows xp

  Last night my laptop that runs windows xp blue screened and says something about the queue and to bring the computer out of which I did. I just tried to turn it on an hour ago, I use it now, and I got a message saying he had recovered from a serious error and I wanted to report to microsoft? I clicked Yes, but unbeknownst to me, I had no internet connection at the point of having to re-enter my our Verizon router WEP number in this laptop. I essentially self-taught myself much on computers that tell you, I'm not really computer literate, but if you can point me in the right direction, I can very well do. This is where to ask my question/problem. I went in the event viewer and found this error/explanation: Index information is corrupt and Indexing Service cannot re - index the content automatically. User action: stop and restart the indexing service using the following command:

  SC stop cisvc

  SC start cisvc

  Can someone tell me please how to do this?  I think I know, but I'm really not sure so please help... Thank you

  It really seems to me as if you had a temporary problem which has now disappeared and that you probably do not need to do anything.

  However, please click Start, and then click Printers and faxes and report what, if anything, you see in the window that opens.

  If you don't see an icon for the printer that you think should be there, you need to fix this.  On the other hand, if your printer icon is there - or if you do not have a printer attached to your computer - you need not do anything.

  If you want your computer to be a little faster and at the same time save space on your hard drive, read the LifeHacker article I linked in my previous post.  However, you need not to do, and you can erase [probably] regardless of the index corruption has occurred by starting and stopping the Indexing Service (cisvc) by entering commands in a command prompt window that I described.

  Yet once, you don't need to change your encryption WEP to WPA or WPA2 wifi, but doing so will make your network more secure wireless.  If you want to change your encryption, you would start by changing the configuration of your router from Verizon.  You should be able to find detailed instructions on the Verizon support site.  I don't know if you have Verizon FiOS or Verizon DSL service; This is a page of relevant support FiOS--> http://www22.verizon.com/ResidentialHelp/FiOSInternet/Networking/Setup/Security/124980.htm

• Windows xp blue screen stop: 00000024

  Title: original windows xp blue screen

  had a blue screen with stop:

  Hi steveshepherd,

  (1) since when are you facing this problem?

  (2) remember to make changes?

  (3) what happens when you insert the Windows XP CD?

  You can follow the steps provided by Karena R in the link below, which relate to this issue

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/blue-screen-stop-error-0x00000024-while-booting/196033b0-fbe9-45dd-abbf-889291d0d133

  Kind regards

  Ajay K

• Crash / blue screen / not freezing Vista - no disk error - no viruses?

  Hey there - I have a dell with vista OS pc. For a week simply freezes small without apparent reason shortly after the start of vista. It seems not
  Plan of exactly when it freezes. I tried not to use some programs, nothing helps - the motive seems to be that if I use a microsoft program - crash of things - I can use firefox etc. without problem. Running in safe mode is very good, and I have access to all my files this way. So far, I have:

  1 received all the important data from the system to a PC on a network in windows 7
  2. tried several restore points - did not help
  3 run several virus - including ms security essentials scans and FSecure online scanner. both have not reported any problem
  4. in the start menu I have run diagnostics from the dell system - which don't report no disk error
  5. starting at cmmd line run chkdsk and chkdsk /f - no effect
  6a ran the event viewer to check what was going on - who himself, then crashed.
  7. waived after 6 and thought, I'd ask the experts instead! :)

  What should I try next?

  Thank you and best regards,
  Howard
  PS quite happy to reformat if you can send me a link to a tutorial / instruction list for this?

  Hello

  Do not forget to check with Support from Dell, their online documentation, diagnostics, drivers and ask in their forums
  for problems known.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  ==========================================================

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/blue-screen-plug-and-play-detected-an-error-most/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  Check out these utilities to see if information may be collected:

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
  time of the BSOD to provide more information about the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
  application goes down has occurred in your system. The information breaks down is extracted from the .wer
  the files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Blue screen after reboot during the installation of the security updates.

  Am also having problems with the blue screen when you restart to install the updates of security (1 blue screen while the computer turns off), which began before 11 security updates 13 Oct.

  These updates of security of the Oct. 13 show as pending. Then uninstalled reintsalled via windows update and still see the as pending. Also received blue screen during the uninstallation of security updates.

  Using ESET Smart Security 4.2.58.3. Removed McAfee supplied with the computer.

  Computer seems to work very well with pending status updates - no more blue screens during use. The latest version of windows update.

  Please notify

  Problem solved blue screen - had to uninstall and reinstall the suite ESET Smart Security.

• Windows 7 blue screen with prototype and crashed with Crysis

  I have windows 7 Professional 64-bit and I have the latest Nvidia Forceware drivers for my graphics card.

  I played the game "ProtoType" I've been on it for about an hour, and then he froze suddenly and given a blue screen then restarted.

  It is the newspaper that came after it restarted:

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7600.2.0.0.256.48
  Locale ID: 5129

  More information about the problem:
  BCCode: d1
  BCP1: 000000000000004A
  BCP2: 0000000000000002
  BCP3: 0000000000000001
  BCP4: FFFFF88004684705
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 256_1

  Files helping to describe the problem:
  C:\Windows\Minidump\012110-16785-01.dmp
  C:\Users\Alex\AppData\Local\Temp\WER-29484-0.SysData.XML

  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  Also, when I play the game Crysis after around 10-30 minutes, it freezes and unresponsive, and I have to leave. It's the journal Crysis comes with.
  (same error happens in exes Crysis 32-bit and 64-bit)

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: Crysis.exe
  Application version: 1.1.1.6115
  Application timestamp: 562b029a
  Fault Module name: KERNELBASE.dll
  Fault Module Version: 6.1.7600.16385
  Timestamp of Module error: 4a5bdbdf
  Exception code: 0000087a
  Exception offset: 0000b 727
  OS version: 6.1.7600.2.0.0.256.48
  Locale ID: 5129
  Additional information 1: a580
  More information 2: a580fb66e5132619b142ac800d3ffa2b
  3 more information: a40c
  Additional information 4: a40ce37e5f74a8bbc8853b60e476fc9d

  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  Thanks for your help :D

  animebuster,
  For error that you got with ProtoType, I found some information on our site MSDN (which is intended for the developers).  Here is the explanation of this error code:

  0XD1: DRIVER_IRQL_NOT_LESS_OR_EQUAL
  The DRIVER_IRQL_NOT_LESS_OR_EQUAL bug control has a value of 0x000000D1. This indicates that a kernel-mode driver attempted to access pageable memory with a high IRQL.

  I suggest you check that all your drivers are up-to-date.
  If you get a response from the thread of Crysis then let us know. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Installing Windows XP blue screen

  I get a blue screen error during the installation of Windows XP SP3. I tried to include the SATA drivers in Win XP installation with nLite, even that did not help.

  I get this screen after the installation says, from the installation of Windows XP... http://bit.ly/oS54wm

  I solved the problem.

  I had to change the type of hard disk driver in the bios and it worked fine. Most of the forums say change to Autodetect/AHCI, but for Legacy has worked for me.

• problem Windows Vista blue screen event

  bluescreen OS Version: 6.0.6002.2.2.0.768.3 LocaleID:1033

  Hello

  Pick up the pieces after a computer crash
  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/blue-screen-plug-and-play-detected-an-error-most/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  Check out these utilities to see if information may be collected:

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
  time of the BSOD to provide more information about the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 which shows details
  application of all accidents occurred in your system. The information breaks down is extracted from the.
  WER files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• KB2503665 causes a blue screen of death during restart

  I'm on a Samsung Q210 running Windows Vista Home Premium Service Pack 2 and used to have automatic updates enabled. Yesterday after installation of updates, the PC crashed with a BSoD during boot. I used Safe Mode to uninstall the updates one by one, and I've identified KB2503665 to be causing the blue screen of death. I tried to contact Microsoft support, but for some reason any their site tells me my ID of the computer cannot be used in the country, I reside (although I am sure that the version of Vista and the serial number are 100% legit).

  Is it possible to configure the automatic updates as it automatically excludes this update in the future?

  Hello

  1. What is the blue stop screen error message?

  You can follow the methods below and see if it works very well.

  Method 1

  Step 1

  You can temporarily disable the anti-virus.

  Disable the antivirus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Step 2

  You can try to download and install the update manually and see if it works very well.

  http://www.Microsoft.com/download/en/details.aspx?ID=26275

  Method 2

  If the problem persists, you can auto hide the update.

  (a) click Start, point to all programs, and then click Windows Update or Microsoft Update.

  (b) click on custom.

  (c) click to uncheck the box next to the update you want to hide.

  (d) develop the update you want to hide, and then click to clear the don't show this update again check.

  (e) click on review and install the updates.

             

   

• Unexpected shutdown, error with Windows Vista blue screen

  My PC during idle time almost always has an Unexpected close, error message blue screen when I get back to work on it if left for more than an hour. He started only since I was a mobile internet stick. Works of stick, but I also sometimes get errors internet explore where it will not work properly and restart internet explore. So I suspect it has something to do with the internet key, but I don't know how to fix it. It's an internet telus sierra stick.

  Details of the problem

  Problem event name: Bluescreen

  The system version: 6.0.6002.2.2.0.768.3

  Additional information about the problem

  BCCode: 9f

  BCP1: 00000003

  BCP2: 842BCB70

  BCP3: 86B 86968

  BCP4: 84CB4888

  OS version: 6_0_6002

  Servive Pack: 2_0

  Product: 768_1

  Hello

  Pick up the pieces after a computer crash
  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/blue-screen-plug-and-play-detected-an-error-most/3deab2fa-4000-4136-8c78-a3d22b1db009 We can analyze the minidumps if make you it available the onedrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  Adding files to your OneDrive
  http://Windows.Microsoft.com/en-us/Windows-8/getting-started-onedrive-tutorial

  A disk - sharing files and folders and change the permissions
  http://Windows.Microsoft.com/en-us/onedrive/share-file-folder

  ZIP or download the content of the C:\Windows\minidump

  Use OneDrive to upload collected files

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  Check out these utilities to see if information may be collected:

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) in a second or so from the time of the BSOD for more information on the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all application crashes occurred in your system. The information breaks down is extracted the wer files created by the Windows Error Reporting (WER) of the operating system component whenever an accident occurred. AppCrashView also allows you to easily record the list of accidents to the text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">